summer recreation headquarters

Price: $254.00

In Stock

48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs

Item # H01380

lowest price pledge

Retail:$289.00

Our Price: $254.00

Hitch Cargo Carrier

This item qualifies for Free Shipping

Shipping Weight: 81 lbs

Quantity: 

In Stock
lets go aero hitch cargo carrier fits 2 inch class iii iv 48x32 gearcage fp4 slide-out for hitches - steel 300 lbs
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

3d view icon
Lets Go Aero Fits 2 Inch Hitch Hitch Cargo Carrier - H01380
Hitch Cargo Carrier H01380 - 48 Inch Long - Lets Go Aero
Lets Go Aero Hitch Cargo Carrier - H01380
Hitch Cargo Carrier H01380 - Slide Out Carrier - Lets Go Aero
H01380 - Fits 2 Inch Hitch Lets Go Aero Hitch Cargo Carrier
Lets Go Aero Hitch Cargo Carrier - H01380
Lets Go Aero Flat Carrier - H01380
48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs Slide Out Carrier H01380
Lets Go Aero Hitch Cargo Carrier - H01380
Lets Go Aero Flat Carrier - H01380
48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs 48 Inch Long H01380
Lets Go Aero Flat Carrier - H01380
48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs Standard Duty H01380
H01380 - Slide Out Carrier Lets Go Aero Flat Carrier
H01380 - 32 Inch Wide Lets Go Aero Flat Carrier
Lets Go Aero Hitch Cargo Carrier - H01380
48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs Fits 2 Inch Hitch H01380
Lets Go Aero Steel Hitch Cargo Carrier - H01380

In Use/Installed

Hitch Cargo Carrier H01380 - Fits 2 Inch Hitch - Lets Go Aero
H01380 - Fits 2 Inch Hitch Lets Go Aero Hitch Cargo Carrier
Lets Go Aero Hitch Cargo Carrier - H01380
48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs Slide Out Carrier H01380
Lets Go Aero Hitch Cargo Carrier - H01380
Lets Go Aero Flat Carrier - H01380
Lets Go Aero Flat Carrier - H01380
H01380 - 48 Inch Long Lets Go Aero Hitch Cargo Carrier on 2018 Hyundai Tucson
Lets Go Aero 32 Inch Wide Hitch Cargo Carrier - H01380 on 2018 Hyundai Tucson
Lets Go Aero Flat Carrier - H01380 on 2018 Hyundai Tucson
Lets Go Aero Flat Carrier - H01380 on 2018 Hyundai Tucson
Hitch Cargo Carrier H01380 - Fits 2 Inch Hitch - Lets Go Aero on 2018 Hyundai Tucson

Customer Photos


  • Flat Carrier
  • Fits 2 Inch Hitch
  • Slide Out Carrier
  • 48 Inch Long
  • 32 Inch Wide
  • Lets Go Aero
  • Steel
  • Class III
  • Class IV
  • Standard Duty
50" x 34" Steel cargo carrier slides out for access to your vehicle's rear cargo area. Side rails help keep cargo in place and a solid floor protects against road grime. Included hitch pin helps eliminate rattle and movement. Call 800-298-8924 to order Lets Go Aero hitch cargo carrier part number H01380 or order online at etrailer.com. Free expert support on all Lets Go Aero products. Guaranteed Lowest Price and Fastest Shipping for 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs. Hitch Cargo Carrier reviews from real customers.


  • All Info
  • Reviews (8)
  • Q & A (12)
  • Videos (4)
  • Photos
  • Why etrailer?

Lets Go Aero Hitch Cargo Carrier - H01380

50" x 34" Steel cargo carrier slides out for access to your vehicle's rear cargo area. Side rails help keep cargo in place and a solid floor protects against road grime. Included hitch pin helps eliminate rattle and movement.


Features:

  • Hitch-mounted, basket-style cargo carrier lets you transport extra gear behind your vehicle
    • Frees up space inside your car for passengers and pets
    • Keeps wet and muddy items from dirtying up the interior of your vehicle
  • Telescoping, twin-tube base lets carrier slide out for easy access to your vehicle's trunk or cargo area
  • Solid steel floor planks protect from road grime and is easy to clean
  • Raised side rails help keep cargo in place and provide multiple tie-down points
  • 2 Anti-rattle Silent Hitch Pins prevent wobbling and noise in trailer hitch receiver and slide-out arm
    • Hitch locks (ACC3250 - sold separately) secure carrier to vehicle
  • Rear reflectors included for added road safety
  • Sturdy steel construction with corrosion-resistant black powder coat finish


Specs:

  • Application: 2" x 2" trailer hitch receivers
  • Weight capacity: 300 lbs
  • Outside dimensions: 50" wide x 34" deep
  • Inside dimensions: 48" wide x 32" deep
  • Distance from center of hitch pin hole to:
    • Closest edge of carrier: 7-1/2"
    • Closest edge of basket: 9"
    • Farthest edge of carrier: 43-1/2"
    • Closest edge of basket (when fully extended): 26"
    • Farthest edge of carrier (when fully extended): 60"
  • Side rail height: 7"
  • Carrier weight: 70 lbs
  • 1-year limited warranty


GearCage4 dimensions



Approved for use on cars, trucks, vans, and SUVsApproved for use on RVs, motor homes, and travel trailers

GearCage4 cargo carrier

The GearCage4 cargo carrier lets you transport your gear on the back of your vehicle. The carrier opens up space inside your vehicle, so you can pack more gear or travel with extra passengers. The carrier sits on a TwinTube platform that extends away from your vehicle so you have access to your rear cargo area. It also has raised side rails that contain your gear and provide tie-down points, 2 anti-rattle hitch pins that reduce the noise of the carrier in your hitch and in the TwinTube base rail, and reflectors that increase visibility.


Raised Side Rails

GearCage4 cargo carrier raised side walls

The carrier has raised side rails that help to keep your cargo in place. The rails also provide multiple anchor points for a cargo net, bungee straps, or other tie-downs.


Easy Assembly and Durable Construction


GearCage4 cargo carrier underside

The carrier is easy to assemble. Simply bolt together with included hardware. The basket is made of heavy-duty steel, has a rust-resistant black powder coat finish, and sports an easy-to-clean solid steel floor. The solid steel floor does better keeping road grime and dirt off your cargo than similar carriers with a mesh bottom floor.


Anti-Rattle Hitch Pins

GearCage4 cargo carrier anti rattle hitch pin

The GearCage4 includes 2 Silent Hitch Pins to prevent rattling and movement in the trailer hitch receiver and theTwinTube base. Each pin features a sturdy steel block with an attached spring that sits inside the square tubing. To activate the anti-rattle devices just insert and tighten each pin. The first pin inserts through the hitch pin hole, the second pin is placed in the passenger-side TwinTube base rail. You can also add locks (ACC3250 - sold separately) to each Silent Hitch Pin to secure the carrier to your vehicle.


Integrated Reflectors

Reflectors

To keep you visible and safe the GearCage4 has integrated reflectors on the right and left sides of the TwinTube. You can also add an LED light kit (H01540 - sold separately) to provide stop, turn, and tail light functions to increase visibility.



H01380 48x32 Lets Go Aero GearCage FP4 Railed Hitch Cargo Carrier Basket - 2 Inch Hitches - Black Powder Coated Steel - 300 lbs

Replaces HCK734



H01380 Installation InstructionsInstallation Details H01380 Installation instructions


Video of 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier Review

Today we'll be taking a look at the 48 by 32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier, part number H01380. The GearCage FP4 Cargo Carrier is a hitch mounted back style cargo carrier, but lets you carry more gear behind your vehicle. The cargo carrier allows you to carry wet or muddy gear outside of your vehicle, and this square tube along the outside allows you to secure down your gear. If you remove the pinning clip here, at the back of our carrier, we can slide our cargo carrier our and away from our vehicle. This is going to allow us to gain easier access into our back hatch area to get any cargo out. You will want to move your carrier back into it's original position and replace the pin and clip before driving away. The solid plated floors prevent any dirt, debris, or grime from getting underneath and into our cargo. The GearCage FP4 Cargo Carrier has two rear reflectors on the back for added road safety.

This cargo carrier works with two inch by two inch trailer hitch receivers, and has an anti-rattle bolt and clip to help keep a lot of shake and play out of the carrier as you head down the road. The carrier comes with an added safety cable to prevent us from sliding the carrier out too far. Another great feature about this cargo carrier is that it does work with vehicles and RVs, motor homes, or trailers. The weight capacity of the GearCage FP4 is 300 pounds. The outside dimensions measure 50 inches wide by 34 inches deep, and the inside dimensions are 48 inches wide by 32 inches deep. The side rail height is seven inches.

This carrier can also work with the LED light kit, part number H01540, and the GearBag 4 Cargo Bag, part number HCR628. Now that we've gone over some features, we're going to show you how to get this installed. It might be a good idea to get an extra set of hands to help you lift the carrier and put it into place inside your hitch. Now, notice we have to hitch pin holes, we've opted for the one closest to our vehicle. That's just going to accommodate our 4Runner that we're using today a little better. You can move the anti-rattle device back and use this one for a closer position to your vehicle if you would like.

Now we'll just take our anti-rattle bit and insert it into our hitch pin hole. Now we'll take our seven-eighths inch socket and ratchet and we'll just tighten our anti-rattle bolt down until it takes all the shake and play out of our carrier. We have that tightened down, now we can place on our clip and we're ready to load up our gear. Now that we have our cargo carrier secured down and all our gear loaded up, let's take this out on our test course and see how it looks. We'll start by going through the slalom. This is going to show us the side-to-side action, which simulates turning corners or evasive maneuvers.

Once we get to the alternating speed bumps, we'll see the twisting action. This will simulate hitting a curb or pothole, or driving over uneven pavement. Once we get to the full speed bumps, we'll see the up-and-down action. This will be just like driving in and out of a parking lot, garage, or driveway. That's going to be our completed look at the 48 by 32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier, part number H01380.


Customer Reviews

48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs - H01380

Average Customer Rating:  4.8 out of 5 stars   (8 Customer Reviews)

50" x 34" Steel cargo carrier slides out for access to your vehicle's rear cargo area. Side rails help keep cargo in place and a solid floor protects against road grime. Included hitch pin helps eliminate rattle and movement.

- H01380

by:


I received my Hauler promptly as stated when ordered. Was also followed up from E Trailer.com about my order. I assembled the hauler with no problems, (you just have to read and look at the pictures) on the directions very good.( I'll also state I was an Army engineer fro 13 years) But, it's not hard at all. I haven't installed it yet as we will be sitting until March, but it looks, feels, and is the best I've seen. I've had a couple in the past and this is by far the strongest i've seen. We plan on hauling a 4K genset on the rear of our 5Th Wheel. It will a be permanent fixture as we need power as we roll. Now the only thing I have to figure out is how to use my hitch mount flag pole holder with the hauler. the rear is open and but the opening is the same size as my holder. (need a sleeve). The hauler has a completely closed bottom (3 piece) to keep the road grime off your belongings. I haven't taken pictures yet but will add some when I hook it up. Overall, It looks, and appears to be a Great product. I would suggest this or the longer version of this. Mine is 32x48. They offer a longer model too. 235085


Comments

It works great. Still holding up to our bumpy roads behind my 5th Wheel camper. I only wish that I would have purchased the 72 width and not the 48 width .

John L - 01/08/2017

22174

- H01380

by:


Review for Lets Go Aero Gear Cage FP4 Used on 2015 Toyota 4Runner Trail Edition Excellent Product! This thing is huge and carries my Yeti Tundra 65 long ways plus several other items with ease. We have used it for a camping trip and cross country travel without any issues. With the pull away feature we are able to open the rear hatch on the 4Runner no matter what is on the carrier. One note: I added the Thinline LED Trailer Tail Lights to this as I did not want to have lights that were hanging down like the Lets Go Aero lights. I only experience two very minor issues with this cargo carrier: First issue was the instructions were not super clear, and there was quite a bit of information crammed onto one piece of paper. Some people may have an issue with this. It took me a few minutes of pouring over it before I was comfortable starting assembly. The second was that I was not aware there were 2 separate bags of hardware, and the second was actually upgraded hardware. I had already assembled the platform when I realized this. So, I may go back and use the upgraded hardware sometime if I have any issues. Fit and finish of the product were perfect, and eTrailer.com's shipping and support have been second to none. I cannot recommend them enough. 443669



- H01380

by:


It came with an upgraded parts to replace some of the included screws. It took for a while to figure out which parts are not needed for assembly. This carrier is quite heavy to lift by one person. I managed to do it by myself, but it's much easier with two person to put it on hitch. I may need to use some sort of floor jack to lift up if I have to do it by myself again. Taking it off from hitch was much easier if I unhook wire cable and slid out the carrier first, then remove U-shaped hitch bar separately. Since hitch position of my van (Toyota Sienna) is low, cargo carrier is very close to road (~4") when go in & out of driveway. I was looking into getting hitch rise adapter first, but looks like using hitch extender would reduce max tongue weight. So I am going to purchase Let's Go Aero TwinTube U-Build-It Slide-Out Hitch Rack (HMK901) and use the raised tube to gain road clearance. 547651



- H01380

by:


Very Good Product Very Nice People To Deal With Quality Product 194822


Comments

Works great no problems

Tom M - 05/26/2016

17861

- H01380

by:


I've only taken this out once as of this writing. But, very happy with this product. I was able to put a ton of stuff into this. I also got the gear bag 4, which was super handy, it adds a few more bucks to the order, but was well worth it. Made locking down the cargo super easy. The slide out feature was great for the dogs as well. My biggest complaint (reason for 4 not 5 stars) was it took a long time (2 plus hours) to build and the instructions were not obvious. I had a ton of bolts left over, not sure why. 427528



- H01380

by:


Added this along with the associated "Gearbag" (HCR628) to our Sprinter to carry bikes and cargo --- loving it. Works as specified. Add the tail-light kit for extra added safety ... H01540. 491565



- H01380

by:


Very pleased with how fast the item was shipped. I placed the order and several hours later I received an email that it had already shipped. I have not been able to put it together yet but plan on it In the next couple of days. I would definitely recommend this item and ordering any other item from here. Keep up the good service! Thank you and God bless ! AJR 503585



- H01380

by:


Very happy with the quality and sturdiness of the product. Look forward to putting it to good use. 289134


10
10

Ask the Experts about this Lets Go Aero Hitch Cargo Carrier
Do you have a question about this Hitch Cargo Carrier?


  • Trailer Hitch Mounted Cargo Carrier for Carrying Beach Gear and Cornhole Boards
  • I have a few recommendations for you, and a few details about picking a basket. That being said, I have three recommendations that fit what you are looking for in terms of size. First, the Maxx Tow 27 x 47 Cargo Carrier with 60-Inch ramp, part # MT70275 . This aluminum carrier has a ramp mounted to the left side, making loading and unloading coolers a snap. Additionally, with an open bar design, sand and water from the beach gear will fall straight through, keeping your vehicle's...
    view full answer...

  • Is it Better to Use a Hitch Cargo Carrier or Roof Cargo Carrier for a 2015 Honda Odyssey
  • You are correct that there are definite advantages of hitch cargo carriers over roof cargo carriers. You will have less drag improving your gas mileage and you won't have to reach up to the roof of your vehicle each time you load or unload. The biggest upsides you will find from the roof cargo carriers is accessing the cargo and of course the cost difference for the amount of cargo you can carry. A good hitch cargo carrier is the Thule Transporter Combi # TH665C. It holds up to 13...
    view full answer...

  • Hitch Pin Clearance of Lets Go Aero GearCage FP4 Cargo Carrier # H01380 and Bike Rack H01199
  • The 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier # H01380 that you referenced has a distance of 6 inches from it's hitch pin hole to the nearest edge of the cargo tray. The bike rack adapter part # H01199 attaches to this same railing. The rack itself does not reduce the clearance, but since the inner bike rack installs on the inside of the upright mast of the rack it's really up to the dimensions of the bike how much clearance would be reduced.
    view full answer...

  • Load Limits on the Let's Go Aero Twin Tube Base System
  • The Let's Go Aero TwinTube Cargo Carrier, part # HMK901 is rated to carry up to 300 pounds in any position. This is true of all of the products that use the TwinTube system as their base. This rating is to provide for appropriate support from the minimum Class III hitch that the carrier will be loaded in. The TwinTube extends 18 inches, giving it a maximum distance of 55-3/4 inches when extended, and 37-3/4 inches when closed. The Boss Hog Cargo Carrier, part # H01472 has a...
    view full answer...

  • Compatibility Of Swing Away Hitch Bike Rack With Cargo Basket That Has Extender
  • The Curt Dual 2" Receiver Tube Adapter, 8" Extension # D-192 will reduce your trailer hitch receivers tongue weight capacity by 50%. The swing away adapters like # 8890313 will not work prior to the adapter based on design. So you will need to make sure you have the clearance for the adapter height. The 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs # H01380 or similar will give you the 17 inches of clearance difference when extended. For...
    view full answer...

  • Dimensions of the Floor of the 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier H01380
  • The floor of the 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs Item # H01380 is 27 inches by 48 inches so it would hang over some but not much. Pro Series carrier # PS1040100 has useable platform dimensions of 47-3/4" long x 31-3/4" wide so it would have more than enough space for your generator. I have included a link to a video review of this carrier for you. Either of these carriers has more than enough weight capacity for your 200 pound...
    view full answer...

  • What are the Overall Dimensions of the Lets Go Aero GearCage FP4 # H01380
  • I reached out to my contact at Let's Go Aero and she gave me the external dimensions of the Lets Go Aero GearCage FP4 # H01380. The overall width (outside of the rail to the outside of the rail) is 50", the overall length (outside of rails) is 34", and the overall height (from the bottom of the shank piece to the top of the rail) is 9". She said that depending on how you choose to install the base (shank) part that will add an additional 7" - 13" as well. I have attached a photo to demonstrate.
    view full answer...

  • Trailer Hitch for a 2015 Subaru Forester and Lets Go Aero Cargo Carrier
  • To use the Let's Go Aero cargo carrier # H01380 you would need a Class III trailer hitch with a 2 inch receiver on your 2015 Subaru Forester. I recommend the Draw-Tite trailer hitch # 75876. This hitch is rated for 525 pounds tongue weight. But you will need to consult the Forester owner's manual for its tongue weight capacity. Whichever is lower, the hitch or the vehicle, is the capacity you need to go by. The carrier weighs 70 pounds so when calculating how much weight you have in...
    view full answer...

  • Hitch Cargo Carrier Recommendation without Ramp Near Dimensions of 30 by 50 inch
  • The closest hitch cargo carriers we offer to match the dimensions of 30 by 50 inch that you want are the Lets Go Aero carrier part # H01380 which is 48 by 32 inch and the Pro Series Carrier # PS1040100 which is 31 by 47 inch.
    view full answer...

  • Will Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier Fit a Class II Hitch with 2 Inch Receiver
  • If your vehicle trailer hitch has a 2 inch receiver opening then you can use the 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches - Steel - 300 lbs Item # H01380. For some reason, some OEM hitches will call a hitch with a 2 inch receiver a Class II even though a Class II hitch is supposed to have a 1-1/4 inch receiver opening. I believe that in those cases the Class rating only refers to the different tow packages available on some vehicles and that is likely where...
    view full answer...

  • Is the 48" Dimension of the GearBag 4 Cargo Bag # HCR628 on the Inside or Outside
  • The GearBag 4 Cargo Bag # HCR628 was designed to fit the Lets Go Aero GearCage FP4 # H01380 which has inner dimensions of 48" x 32" meaning that the bag itself will have outer dimensions that match that. If you have smaller chairs, like lawn chairs, then you could turn then diagonally and they would fit no problem.
    view full answer...

  • Best Cargo Carrier and Bike Rack Combination for a 2016 Mercedes Sprinter Camper Van
  • Using the Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier # H01380 along with the Lets Go Aero Rack-IT # H01199 is a great solution for carrying cargo and bikes. The only other option that you may be interested in is the Lets Go Aero BikeWing T4 # B01458 and the AerPack Cargo Bag # B01212. The big difference is that the cargo carrier option has a weight capacity of 300 lbs while the cargo back has a weight capacity of 120 lbs. The advantage of using the T4 is that you can use it to...
    view full answer...


Do you have a question about this Hitch Cargo Carrier?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch cargo carrier for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch cargo carrier information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Zack K
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Sarah W
Written by:
Matthew S
Installed by:
Savanna B
Photos by:
Stacy F
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.