1. Hitch Cargo Carrier
  2. Curt
  3. Flat Carrier
  4. Fixed Carrier
  5. Fits 2 Inch Hitch
  6. 60 Inch Long
19x59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs

19x59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs

Item # C18108
lowest price pledge
Our Price: $103.52
You Save: $44.58
Hitch Cargo Carrier
This item qualifies for Free Shipping
Shipping Weight: 31 lbs
Hitch Cargo Carrier C18108 - 60 Inch Long - Curt
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed


Sturdy, carbide black powder coated carrier holds wet or messy cargo you don't want inside your car. Sidewalls have tie-down points to secure your gear. Hitch pin and clip included. Call 800-298-8924 to order Curt hitch cargo carrier part number C18108 or order online at etrailer.com. Free expert support on all Curt products. Guaranteed Lowest Price and Fastest Shipping for 19x59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs. Hitch Cargo Carrier reviews from real customers.
  • All Info
  • Reviews (4)
  • Q & A (5)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Hitch Cargo Carrier - C18108

  • Flat Carrier
  • Fixed Carrier
  • Fits 2 Inch Hitch
  • 60 Inch Long
  • 20 Inch Wide
  • Curt
  • Steel
  • Class III
  • Class IV
  • Heavy Duty

Sturdy, carbide black powder coated carrier holds wet or messy cargo you don't want inside your car. Sidewalls have tie-down points to secure your gear. Hitch pin and clip included.


  • Hitch-mounted cargo carrier lets you tote extra gear
    • Frees up space inside your car for passengers and pets
    • Keeps wet and muddy items from dirtying up the interior of your vehicle
  • Pre-drilled holes along the sidewalls offer tie-down points
  • Mesh floor is easy to clean
  • Rugged steel construction
  • Corrosion-resistant carbide black powder coated finish
  • Bolt-together assembly
  • Hitch lock sold separately


  • Application: 2" x 2" trailer hitch receivers
  • Weight capacity: 500 lbs
  • Outside dimensions: 60-1/4" long x 19-1/2" wide x 2-3/4" tall
  • Inside dimensions: 59-7/8" wide x 19-1/4" wide x 2-1/2" deep
  • Carrier weight: 30 lbs
  • Measurement from center of hitch pin hole to closest edge of carrier: 3-1/4"
  • 1-Year limited warranty

18108 Curt 19x59 Hitch Cargo Carrier - 2" Hitches - Black Powder Coated Steel - 500 lbs

Installation Details C18108 Installation instructions

Video of 19x59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Curt Cargo Carrier Review

Today we are going to be taking a look at the 19 by 60 Curt Cargo Carrier with a thick shank. This is designed for use in two inch hitches and offers a 500 pound weight capacity. Part number is C18108. Now installation on the vehicle once the cargo carrier is assemble is very easy. I'm just going to slide the shank into the receiver tube, line up the pin hole with our hitch pin hole. With those in line, we are going to a standard five eights pin. We are using part number PC3 if you don't already have one, you can check that out on our website and pick it up.

Just slide that through the receiver tube through our cargo carrier and back out then we'll secure it here on the other side with the clip. This cargo carrier offers a two and a half inch raised side rail, it's going to go all the way around. It's going to do a couple of things for us to give this multiple tie down points. It also allows for the placement of the license place relocation holes in case our cargo was to come up and block our license plate. We want to just move that plate down here and secure it on that way we can stay legal. The finish on it is a carbide powder coat. This is very strong.

It's also very corrosion resistant. That coupled with the open mesh floor design which allows all the dirt and debris and things like that to fall down through rather than resting on the top of it and causing some of that build up and corrosion really helps it to last a long time and look good. The shank follows all the way through. All the way back here to the rear give us really good support and we've got braces that come off both side to get us our side to side stability. It's in the easy bolt together installation or assembly rather. You have your two pieces here along with your shank and your supports. Now that we've gone over all the key features in the rack.

Let's go ahead and load it with some gear and see what it looks like going through the test course. Now that we've got the last of our weighted bags loaded down, we put 50 pounds in each bag, we've got a total of 200 pounds on the carrier. We are now going to go out through the test course you can see what it looks like in action. we'll start by going through the slalom, that will show you that side to side movement of the rack just like if you are going around corners or changing lanes. Go around the corner into the alternating speed bumps, it's going to put some twisting and some torquing on the rack, going to see what it's like if we we're to hit a pot hole or a curve and then we go into the solid speed bumps. That shows us that up and down movement of the rack just like going in and out of the driveways, parking garage and things like that. That will complete today's look of the 19 by 60 Curt Cargo Carrier designed for use in two inch hitches and offering a 500 pound weight capacity part number C18108.


Customer Reviews

19x59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs - C18108

Average Customer Rating:  4.5 out of 5 stars   (4 Customer Reviews)

Sturdy, carbide black powder coated carrier holds wet or messy cargo you don't want inside your car. Sidewalls have tie-down points to secure your gear. Hitch pin and clip included.

- C18108

I use this for a Honda EU3000is generator and four 5 gallon jerry cans of fuel and/or water. It has worked well for the couple trips for which it has been used so far. My only complaint is that the mesh is light gauge and only welded in place every 4" or so. I put additional 2x wood supports to support the weight of the genny on the front and rear angles. 813390

- C18108

Used rack to haul belongings on a 1,100 mile round trip vacation. Totes did not exceed 100 lbs. No vibration/rattling. Satisfied w installation & overall customer service. 422086

- C18108

i did a good amount of research on which cargo carrier would work best for my needs...etrailer's website is very helpful when comparing models..they carry a good variety of models to choose from with all pertinant information available placing my order was simple and customer service is very helpful when deciding which accessories work best with your model...shipping was fast...got mine in 3 days...highly recommend etrailer for anyone needing cargo products 188315

- C18108

The carrier was easy to assemble and well made. Fits my Traverse well. I reversed the bolts holding the frame together so they could not scratch anything. It is a bit on the light weight side as far as metal thickness. But I did not want a 60 pound carrier hanging off the back. 145246

Works great. Has made trips with camping/picnic gear much easier.
Jim - 08/09/2015


Ask the Experts about this Curt Hitch Cargo Carrier

  • Least Visible 2-Inch Hitch Option for 2018 Honda CR-V
    The best 2-inch hitch option for your 2018 Honda CR-V is the Curt model # C13397. This USA-made hitch has the 2-inch receiver size you want and it is also the most discrete in appearance. You can refer to the linked video for a comparison of hitch options and to the included photo and video showing this hitch fully installed. The small center receiver tube is the only part of the hitch that will be visible. If your plans are for a hitch bike rack or hitch cargo carrier you can use such...
    view full answer...
  • Recommended Trailer Hitch for RV with 4 x 4 Square Bumper
    We currently have five bumper mounted 2" trailer hitch receivers that will work with the 4" x 4" bumper on your trailer. I have attached these options for you but I recommend using the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100. This trailer hitch uses steel plates to surround the bumper as opposed to the u-bolts in the other options. The steel plates will provide more support and also look much better than the u-bolt options. If you also need a cargo basket for your generator...
    view full answer...
  • Hitch Adapter with 6 Inch Rise for Use with Cargo Carrier
    A cargo carrier could be used with a hitch adapter that offers you a 6 inch rise. It is important to keep in mind that using such a hitch adapter would reduce your trailer hitch's weight capacity by 50 percent. So for example, if your hitch has a 500 pound tongue weight capacity using the adapter would limit the hitch to no more than 250 pounds of tongue weight. The only hitch adapter we offer that would provide you a 6 inch rise is the MaxxTow Dual Hitch Extender for 2 Inch Trailer...
    view full answer...
  • What is the Overall Extension with MaxxTow Cargo Carrier # MT70108 Installed
    On MaxxTow Cargo Carrier # MT70108 the distance from the center of the hitch pin hole to the furthest end of the carrier is 31 inches. On your dual hitch receiver, if the upper receiver opening is higher than the front hood area of the toad then there is less likely to be an interference problem. Carpod Walled Cargo Carrier # M2200 measures just 28 inches from the center of the pin hole to the far end of the carrier so it has even less of a chance for interference. And we also have...
    view full answer...
  • Center Bar Assembly on 19 x 60 Curt Cargo Carrier
    The center bar on the 19 x 60 Curt Cargo Carrier, part # C18108 does not extend up into the mesh area of the carrier. There is a little bit of a lip where it connects the two parts of the carrier, but nothing that is noticeable during normal use.
    view full answer...

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality hitch cargo carrier for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch cargo carrier information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Adele M
Updated by:
Sarah W
Updated by:
Matthew E
Updated by:
Isabelle B
Written by:
Laura H
Video by:
Dustin K
Installed by:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.