Product Experts Available Now!
Call 800-298-8924
Hollywood Racks Commuter 2 Bike Carrier for 1-1/4" and 2" Hitches - Tilting
(19 reviews)
Price: $125.95
In Stock
Hollywood Racks Commuter 2 Bike Carrier for 1-1/4" and 2" Hitches - Tilting
Item # HR2500
Retail:$175.49
Our Price: $125.95
You Save: $49.54
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (19)
- Q & A (33)
- Videos (1)
- Photos
- Why etrailer?
Hollywood Racks Hitch Bike Racks - HR2500
- Hanging Rack
- 2 Bikes
- Hollywood Racks
- Tilt-Away Rack
- Fold-Up Rack
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Class 1
- Class 2
- Class 3
- Frame Mount
- Locks Not Included
The Commuter lets you transport 2 bikes on your vehicle's 1-1/4" or 2" hitch without breaking the bank. Versatile, lightweight rack features soft rubber cradles, dual arms that fold down, a tilting mast, and an anti-rattle hitch bolt.
Features:
- Hitch-mounted rack carries 1 or 2 bikes on the back of your vehicle
- Sturdy cradles with soft rubber straps secure bikes to rack
- Rotate to better fit bikes of varying sizes
- Slide along arms, allowing you to adjust bike spacing
- Won't scratch or scuff your bike's finish
- Dual, folding arms provide excellent bike support
- Reduce the need for adapter bars on children's, women's and alternative frame bikes
- Pivot down when carrier is not in use
- Tilting upright mast allows easy access to your vehicle's rear cargo area
- Adapter sleeve enables rack to fit both 1-1/4" and 2" hitches
- Anti-rattle bolt reduces movement of rack in hitch receiver
- Anti-rattle hitch lock and cable lock set (HRLHPTC - sold separately) can be used to secure the rack to your hitch and your bikes to the rack
- Rust-resistant, sturdy steel construction with black powder coat finish
- Red safety reflectors on arms
Specs:
- Application: 1-1/4" x 1-1/4" (Class I and Class II) and 2" x 2" trailer hitch receivers
- Carrying capacity: 2 bicycles
- Weight capacity: 75 lbs
- Distance from center of hitch pin hole to back of upright bar: 10-1/4"
- Weight: 16 lbs
- Limited lifetime warranty
The Commuter is the perfect option for bikers who want a functional, affordable rack that fits both 1-1/4" and 2" hitches, transports 1 or 2 bikes to the local park or trail, and easily stores in your trunk or garage between uses.
This lightweight rack weighs just 16 pounds and is simple to install. It slides into your vehicle's hitch receiver and secures with the included anti-rattle bolt, which prevents the rack from rattling around inside the receiver. Leave on the included adapter sleeve to fit the shank into your vehicle's 2" hitch receiver, or remove the sleeve to slide the shank into a 1-1/4" receiver.
Dual Arms with Cradles
Dual arms support your bikes and better accommodate women's, children's and alternative frames. (An adapter bar [HRBA-PRO - sold separately] may still be required.) The arms easily fold down when the rack is not in use - just remove the tethered bail pin.
Soft rubber cradles with straps firmly grip your bike's frame. The cradles rotate and slide along the arms, so you can easily adjust them based on the type and number of bikes you're transporting. And you can use the integrated safety strap to help keep your bikes tied down.
Tilting Mast
The Commuter's upright mast tilts forward to allow access to your vehicle's cargo area. Once your bikes are unloaded, just remove the tethered bail pin from the base and tilt the rack away from the vehicle.
An anti-rattle hitch lock and cable lock set (HRLHPTC - sold separately) is recommended to deter theft of the rack and your bikes.
HR2500 Hollywood Racks Commuter Hitch Bike Rack - 2 Bikes - 1.25 Inch and 2 Inch Hitches
Installation Details
Video of Hollywood Racks Commuter 2 Bike Carrier for 1-1/4" and 2" Hitches - Tilting
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Hollywood Racks Commuter 2 Bike Rack Review
Today we're going to be talking a look at the Hollywood Racks Commuter. This is a folding and tilting 2-bike rack. It's designed for use with an 1-1/4" or a 2" hitch. Its part number is HR2500. Now tilting the rack away from our vehicle, very easy to do. Just remove the bale pin located here at the base of the mast and allow it to tilt away.
As you can see, this gives us good access into our cargo area and it's going to work for most vehicles. We're now just going to stand that mast back into its upright position. Here at the top we've got another bale pin. Pulling that allows us to swing our dual cradle arms up into position. Each arm will have the nice red reflector here on the ends. Makes it visible in the evening, adds a little bit of safety to it for us.
We're going to have rubber-coated cradles. These are going to have the nice flexible soft rubber bands. That's going to prevent any frame wear or any kind of scuffs. These are going to rotate around the cradle arm. It's going to help us to get on a wide variety of frame styles. Now outside to outside here on the cradle arms it's 14" so getting narrower frame bikes, things such as that, on and off the rack shouldn't be an issue.
Now that we've gone over some of the key features of the rack, let's show you how to install it onto your vehicle. Converting the Commuter from an 1-1/4" as you see here over to a 2" is a very easy process. We'll grab our rack and our black adapter. We're going to place that right over the small threaded hole that's in the shank. Want to get our holes lined up there. We'll place our Allen bolt in and thread it on down.
Now you want to get this snug but there's no need to overtighten it or do anything to torque it down too much. We're going to put our bolt right in there and cinch this right up against this receiver tube of our hitch, which is going to give us a nice smooth, steady ride for our bikes. Once we have that in place we're just going to slide it right into the receiver tube. We need to line up the threaded hitch pin hole here with the hole that's in the receiver tube. We're going to place in our anti-rattle bolt and thread that in. We just want to take this down to hand tight for right now. Then we can finish it off with our wrench. Now again, as we tighten this bolt down the shank's being drawn over against the receiver tube. As you can see right now, we're pretty free to wiggle that around and move it, but as we get some torque applied to that bolt you see all that play is gone. We'll then used to supplied clip. We're going to slide it through the hole that's in the end of our bolt just to give us a little bit of extra protection there. With everything secured our shank we're going to load up a bike. Place our bike right up into our cradles and then we can secure it using our straps. Now the straps, we want to have them secure but we certainly don't need to overtighten them. Stretching them too far could cause excessive wear. There we go; we've got that bike loaded up. I'll go ahead and load up a second bike and let you see what it looks like at capacity. Now as you can see on this hybrid-style frame there's virtually no upper tube for us to connect our cradle arms to. What we've done, we've brought in the Hollywood Racks bike adapter bar. This can be used in a wide variety of applications for women's or kids' frame bikes as well. The part number on that is HRBA-PRO. Here in the rear we have a steel loop. Attached to that's our integrated safety strap. This is designed to snake right in through our bikes, like here we'll go through the frame, the tire, and then through the front wheel on our second bike. We'll bring this up, back around, then we're going to go through the rear wheel frame and front wheel on our bike. To secure this all we need to do is first run it through the closer section of the inside gap, then the outside. We're going to cinch this down. This is going to keep our bikes from moving around a lot, and it's also going to protect them in case any of our straps fail or something like that. To secure your bikes we do have a kit available. It's a locking hitch pin bolt, as well as a locking steel cable that's designed to go through both bikes and also through the steel loop located here in the rear. Its part number is HRLHPTC. You can check that out on our website. The rack offers a black rust-resistant powder coat finish. It's going to give us a strong and durable, long lasting look on the outside. It's also made well enough to offer a 75 pound weight capacity, so we can get up to 37-1/2 pounds per bike on it. Hollywood stands behind their products and offers a limited lifetime warranty. Now that we've got our rack all loaded up we're going to head out to the test course and let you see what it looks like in action. We'll start by going through our slalom course. This simulates changing lanes or maybe some evasive maneuvers. As we make our way around the counter to the alternating bumps this is going to apply some torque to the rack. This will be like hitting to pothole or curb that we didn't see. As we get into our salad speed bumps it's going to simulate the up and down movement. This is going to be just like going in and out of driveways or parking garages. That will complete today's look at the Hollywood Racks Commuter tilting 2-bike rack designed for use in 1-1/4" and 2" hitches, part number HR2500. .
Customer Reviews
Hollywood Racks Commuter 2 Bike Carrier for 1-1/4" and 2" Hitches - Tilting - HR2500
Average Customer Rating: 4.8 out of 5 stars (19 Customer Reviews)
The Commuter lets you transport 2 bikes on your vehicle's 1-1/4" or 2" hitch without breaking the bank. Versatile, lightweight rack features soft rubber cradles, dual arms that fold down, a tilting mast, and an anti-rattle hitch bolt.
- HR2500
by: William P12/10/2014
Everything is as advertised, including free shipping... This is for my son and his wife for christmas, so will follow up after the holiday.. 164121
- HR2500
Mike - 04/02/2019
51353
by: Mike04/02/2018
Good product for the price. Only used it a couple of times, but it fits my needs perfectly. Solid and light weight. 491630
Comments
Still working perfectly. Absolutely no complaints
Mike - 04/02/201951353
- HR2500
by: Eddy05/02/2019
Best bike rack I’ve ever owned. Well built, light (<16 lbs) and a lot of attention yo details. Fits perfect in my Honda Fit. 636279
- HR2500
by: Soeren01/18/2020
Lightweight and easy to attach and detach from hitch. Feels sturdy. The adaptor sleeve is now metal and four sided, replacing 3 sided plastic sleeve. Highly recommend. Came with instructions for old model which does not mention to orient lower beam such that it does not fold flat when tilted (one side of lower beam is angled). Suggested improvement: replace screw in hitch pin with a self locking (leveraged) pin. 739219
- HR2500
by: Mike K02/02/2018
The bike rack came 5 days after I ordered it. Real easy to assemble. Looks sturdy enough. Won't know till the weather warms up a bit. Dan, the service rep, was extremely helpful/knowledgeable about the product. I explained that it was for a 2018 Subaru Forester w/ a 1 1/4" hitch. Wanted something fairly sturdy/reliable without paying a small fortune. Was told etrailer.com got very good feedback on this product. 472431
- HR2500
by: Michael12/07/2017
Very good carrier at this price point. etrailer did a great job on delivery and followup. 458187
- HR2500
Jay Y - 08/31/2018
43051
by: Jay Y08/31/2017
Fantastic customer service: The consultants are professional at etrailer and the very best... Contacted etrailer researching a hitch bike rack for my 1 1/4 hitch and specifications about the width of cradle on bike rack. CS and Pat are very competent, these consultants took my calls and with great care discussed my concerns, and answered all questions so that l could make an informed decision. I purchase the HR2500 hitch bike rack. My products arrived 4 days earlier than anticipated without any damage, and items were exactly what l ordered. The products are everything l desired and very well constructed. I am satisfied and happy with my etrailer experiences and bike products. No longer will my bikes look disorganized, bike frames on an angle, when attached to my car. etrailer met my bike transport needs! 427526
Comments
I am still enjoying the use of this product.
Jay Y - 08/31/201843051
- HR2500
by: Rick B.08/15/2017
The bike rack is very affordable and works extremely well. etrailer is a great company to purchase from. 420585
- HR2500
by: Mike D04/07/2017
A little wobbly in the receiver most likely due to being adaptable to 2" and 1-1/4". Serves my needs 364031
- HR2500
by: joe s.07/17/2016
secure and easy to engage, couldn't ask for a better product..... 273003
- HR2500
by: DON09/29/2015
The bike carrier was much better than expected. Very happy. The shipping was very fast. 228288
- HR2500
Gene - 09/18/2016
21055
by: Gene09/19/2015
Bike rack and hitch frame have been installed and fit like a glove. Easy to use, bikes fit securely. A good sensible product for the money. Happy with the purchase. 226416
Comments
Its been a year but the rack and frame continue to work well together. No problems, still fits like a glove!! Very happy with purchase and results.
Gene - 09/18/201621055
- HR2500
by: Doug08/26/2015
My second Hollywood rack. Well built, dependable, easy to install and operate. 221857
- HR2500
by: Andrew07/11/2015
Two thumbs up. Arrived on time and I am happy with quality of product. 210974
- HR2500
Patrick B - 08/13/2014
6230
by: Gary J.08/11/2014
The rack is great. Now I need to find how to keep it from wiggling like it's going to fall off 145999
Comments
The Curt Support Strap is designed to help support hitch accessories like bike racks and keep them stable. Check out part # 18050
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
$9.84.
-- Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
$9.84.
Patrick B - 08/13/20146230
- HR2500
by: Dan R03/06/2014
Shipping was super fast and the rack went together real easy. Seems to be sturdy and nicely. I haven't used it yet. 119736
- HR2500
by: scott08/15/2013
Easy assembly and for now anyway (1st few uses) sturdy. 95275
- HR2500
by: Mike W06/25/2013
Good product, easy to install. thanks 85990
- HR2500
by: Marleen K.05/14/2013
Very durable and easy to use...I highly recommend buying this! 80287
19
19
Ask the Experts about this Hollywood Racks Hitch Bike Racks
- Will the Hollywood 2 Bike Carrier # HR2500 fit on a 2013 Chevrolet SparkThe Hollywood Commuter 2 Bike Carrier, # HR2500, is an excellent option for your 2013 Chevrolet Spark assuming you already have a trailer hitch installed on your vehicle. All of the trailer hitches available for the Spark are Class I rated hitches, so it is important that we look at Class I rated bike carriers like the Hollywood bike carrier that you mentioned. I have attached a link to all of our Class I rated bike racks for you to check out. Please keep in mind, Class I trailer hitches...
view full answer... - Compatibility of Hollywood Racks Commuter 2 Bike Carrier # HR2500 with Class A MotorhomeAccording to my Hollywood Rack representative, the Hollywood Commuter 2 Bike Rack, part # HR2500 will be compatible with your Class A motorhome, as long as the weight of the bikes remains within the 75 lb weight capacity. However, Hollywood racks cannot be used on the rear of a towed trailer of any kind. To carry womens bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # HRBA-PRO is recommended. The adapter spans the distance between...
view full answer...![]()
- Recommended Hanging 2 Bike Rack to Fit a 2013 Hyundai Genesis For your 2013 Hyundai Genesis, we carry a few different two bike racks that would work well for you. The Hollywood Racks Commuter 2 Bike Carrier, # HR2500, that you referenced will work well on your Genesis. The rack can carry 2 bikes with a total weight capacity of 75 lbs. The rack itself is light weighing only 16 lbs. I like the Kuat Beta Folding 2 Bike Rack, # B202-114. The Beta has an all aluminum construction that makes is one of the lightest 2 bike racks at 12.6 lbs. This rack...
view full answer... - Can Anti-Sway Cradles be Added to the Hollywood Racks Commuter Bike CarrierThe Commuter, # HR2500, is Hollywood Racks bargain carrier and it lacks a lot of the features, such as anti-sway cradles, that other carriers have. The 3-bike version you mentioned is a different series, the Traveler, # HR6500. The diameter of the arms on the Commuter are 1-1/4 inches whereas the carriers that use the anti-sway cradles are 1 inch. The anti-sway cradles will not fit the Commuter. The Commuter comes with a strap that you could use to secure the bikes and limit movement....
view full answer... - Bike Rack that Would Allow Rear Door Access for 2020 Jeep Wrangler When LoadedWith the Hollywood Racks Commuter 2 Bike Carrier # HR2500 folded you'd have pretty limited access to the rear door of your 2020 Jeep Wrangler since it swings out to the side. The only type of bike rack we offer that would give you the rear door access you are looking for is swing away bike rack like the Sportrack Ridge Swing part # SR2415 which swings totally out away from the rear of the vehicle to give total access to the rear area with bikes loaded even. I attached a review that...
view full answer... - Will Hollywood Racks Commuter rack HR2500 work with 2018 Toyota PriusYes, the Hollywood Rack Commuter bike rack part # HR2500 will work great on your 2018 Toyota Prius with a hitch installed on it as it fits Class I hitches like what are available for your vehicle. For a hitch the Draw Tite part # 24966 is the way to go as well. I attached review and install videos for you to check out too.
view full answer... - Replacement Cradles and Straps Needed for the Hollywood Racks Commuter # HR2500We do have replacement cradles and straps for the Hollywood Racks Commuter # HR2500 that you referenced. The part # HR750-P on our site comes with 2 cradles and 2 straps to secure 1 bike. If you need to replace enough for 2 bikes then you need 2 of these kits.
view full answer... - Is the Hollywood Racks Commuter 2 Bike Carrier # HR2500 Compatible with an RVIf by RV you are referring to a motorhome then yes, you can use the Hollywood Racks Commuter 2 Bike Carrier # HR2500 with your motorhome. To add some locks to this bike rack you need the hitch lock and cable lock set # HRLHPTC. Some people do refer to their trailer as an RV (usually bigger trailers). If this is the case then you will need to use a bike rack that has been tested and approved for the extra movement and stress that is at the rear of a trailer. For a similarly priced...
view full answer... - Will the Hollywood Racks Commuter Bike Rack Fit a 2009 Subaru Forester with Class I Trailer HitchThe Hollywood Racks Commuter, # HR2500, is compatible with a Class I trailer hitch. It should also clear the rear bumper on your 2009 Subaru Forester. On Class I hitches we installed on the same generation Forester as yours we found that from the center of the hitch pin hole back to clear the rear bumper is about 7-1/2 inches. The Commuter measures 10-1/4 inches from the hitch pin hole to the back of the upright bar so it sticks out far enough to clear the bumper. You will want...
view full answer... - Length of Hollywood Racks Commuter Hitch-Mounted Bike Rack # HR2500 Receiver TubeAfter speaking to my contact at Hollywood Racks, I have confirmed the length of the receiver tube you referenced for the Hollywood Racks Commuter Hitch-Mounted Bike Rack #HR2500 is 10-1/4 inches from the center of the pinhole to the back of the mast (upright bar) on the rack. I have included a graphic showing the exact measurements and I have included a link to the instructions for the proper installation of this product on your 2012 Nissan Juke. If you plan to carry womens bikes or...
view full answer...![]()
- Is a Lock Included with Hollywood Racks Commuter 2 Bike Carrier # HR2500The Hollywood Racks Commuter 2 Bike Carrier # HR2500 does include a threaded anti-rattle hitch bolt to hold the rack in place in your hitch and to reduce motion. This bolt requires a wrench or similar tool for installation and removal. It is not a lock, however. A determined thief could still steal the rack if properly equipped and motivated. You can add Anti-Rattle Hitch Lock and Cable Lock # HRLHPTC.
view full answer... - Bike Rack and Trailer Hitch Recommendations for a 2012 Subaru Impreza 5-Door HatchbackThe Super Shuttle bike rack, # RG8015127, is not compatible with your 2012 Subaru Impreza but we do have some bike racks that are. Please note that if the vehicle has a rear spoiler, you cannot use a trunk mount bike rack. I have included a link to the trunk mount racks that are listed as a fit for the hatchback with no spoiler. The rack that is most like the Super Shuttle is the Thule Passage 3, # TH911XT. If you will be carrying womens, childrens, or alternative frame bikes, I recommend...
view full answer... - What Are Inexpensive Bike Rack Options for a 2003 Toyota HighlanderDepending on how your 2003 Toyota Highlander is equipped you can potentially choose from trailer hitch-mount, trunk-mount and roof rack-mount bike carriers. Generally the most cost-effective type is the trunk-mount variety. Roof rack types are available in single-bike capacity but the smallest hitch and trunk bike carriers are capable of transporting 2 bikes. The link provided will show you all trunk-mount 2-bike carriers suitable for your Highlander. Among these the most cost-effective...
view full answer...![]()
- Easiest Way to Remove Hollywood Racks Commuter 2 Bike Carrier From VehicleWhen you remove the rack from the vehicle, you really should remove the entire rack. You could remove the upright portion from the shank that slides into the receiver, but I would not recommend it. Having the remaining shank sticking out behind the vehicle could be dangerous to pedestrians or when backing your vehicle. Using a socket or ratcheting wrench would allow you to very quickly and easily remove the hitch bolt. I've linked you to a demonstration video featuring the # HR2500...
view full answer... - Could Loc-Tite be Put On Thumb Screw of Hollywood Racks Commuter 2 Bike CarrierYou can try putting loc-tite on the threads of the thumb screw that hold the shank base to the upright mast of the Hollywood Racks Commuter 2 Bike Carrier for 1-1/4" and 2" Hitches # HR2500 that you have. It won't hurt anything and should hopefully prevent the screw from continuing to back out.
view full answer... - Will Hollywood Racks Bike Carrier Clear Rear Mounted Spare Tire On 2002 Honda CR-VThere is a quick measurement you can take to make sure you have the clearance for anything to mount in your trailer hitch on your 2002 Honda CR-V. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight edge vertically against the back of the spare tire, letting it extend below the trailer hitch receiver opening. Then measure from the center of the hitch pin to the straight edge. This will give you the distance you need to clear the spare tire....
view full answer... - Recommended Hitch-Mount Bike Carrier For 2002 Nissan SentraThe bike rack I recommend for your 2002 Nissan Sentra is the Swagman Trailhead 2 Bike Rack, part # S63360. I like this rack a bit more than the # HR2500 because it has heavy duty cradles and also features a 3 inch rise in the shank, which may give you a little more ground clearance at the back of your Sentra. Both racks have a tilting feature which allow you access to the rear cargo area of your vehicle, and both racks will fit a 1-1/4 inch receiver opening and a 2 inch receiver with...
view full answer... - Will the Hollywood Racks Commuter 2 Trailer Hitch Mount Bike Rack Fit a 2002 Ford Explorer SportOn the Hollywood Racks Commuter 2, # HR2500, it measures 10-1/4 inches from the center of the hitch pin hole to the back of the mast (upright bar) on the rack. It is unlikely that you would need to use any type of extension for this rack on your 2002 Ford Explorer Sport. I have included a link to the installation instructions for you to view. If you will be carrying womens, childrens, or alternative frame bikes that do not have a top frame tube that goes straight across, I recommend...
view full answer... - Will the Hollywood Racks Commuter 2 Bike Carrier Fit a 2016 Subaru OutbackYes, the Hollywood Racks Commuter 2 Bike Carrier part # HR2500 will work just fine on a 2016 Subaru Outback Wagon with what I assume is a factory trailer hitch. The Hollywood Racks Commuter 2 Bike Carrier also has a tilting feature so you can get into the rear hatch area with the rack still attached. I took a further look at the Hollywood Racks Commuter 2 Bike Carrier and there is no minimum hitch pin hole depth requirement so this won't be an issue either if you were wondering. I however...
view full answer... - Will Bike Tires Hit Ground When On Hitch Mounted Hanging Bike Rack Installed On 2009 Honda FitFor the hitch-mounted bike racks we offer like the Rola TX-102 2-Bike Rack, part # 59400, the bike tires will be higher than the shank of the hitch they are mounted in. I have attached a photo of the 59400 on the back of a vehicle. As you can see in the photo, the bike is sitting higher than the trailer hitch shank and unless you were to drive over a very exaggerated hump, you would not risk having the tires of the bike hit the pavement. The Hollywood Racks Commuter 2 Bike Carrier,...
view full answer...![]()
![]()
- Hitch Pin Hole on 3 Bike Hitch Mount Rack # 63123 Wont Line Up with Hole on Hidden Hitch ReceiverI think that I may know what the problem is. If you are attempting to use the 3 Bike Hitch Mount Folding Rack with Rotating Shank, # 63123, in a Class I, 1-1/4 inch hitch, this will not work. This bike rack fits Class II 1-1/4 inch and 2 inch hitch receivers. To keep someone from overloading a Class I hitch, manufacturers place a stopper in the back of Class I hitch receivers so that drawbars and accessory shanks can only slide into the trailer hitch opening up to that point. On hitch...
view full answer...![]()
- Can a Lock be Added to the Threaded Hitch Pin of the Curt 2 Bike Hanging Style RackCurt does not have any locks for the threaded hitch pin that comes with the Curt 2 Bike Rack # C18029 but we have found that the SportRack # SR0901 fits the Curt bike racks. You can add a cable lock like part # e98891 for your bikes but not for the rack itself. If you don't already have a bike rack then you might want to check out the Hollywood Racks Commuter 2 Bike Carrier # HR2500 because it has a 75 lb weight capacity which is a little over the typical 70 lb weight capacity of hanging...
view full answer... - Bike Rack Options for a 2008 Toyota Highlander for Very Occasional UseThere are two possible ways that you can carry a bike on your 2008 Toyota Highlander, but I am sorry to say that a trunk mount bike rack will not work. It cannot be safely attached to the vehicle. However, you can still use either a trailer hitch mounted rack or a roof rack. If you want to go with a trailer hitch, I recommend Draw-Tite Trailer Hitch, # 75586. And for a bike rack, you can go with something basic like the Commuter 2 Bike Carrier, # HR2500. This is a good, solid rack for...
view full answer... - Inexpensive 2-Bike Rack Recommendations for a 2010 Hyundai TusconThe most economical trunk mounted bike rack that we carry for your 2010 Hyundai Tucson is the Thule Passage 2 Bike Rack, # TH910XT. This bike rack includes many of the same features as the more expensive bike racks like the anti-sway cradles and Thules Fit Dial system while remaining at an affordable price. I have attached the installation instructions as well as a demonstration video of this bike rack for you to check out. I have also attached a link to all of the trunk mounted bike...
view full answer... - Replacement Hitch Adapter Sleeve For Hollywood Racks Bike CarrierWe do offer a replacement hitch adapter for Hollywood Racks bike carriers. Part # HRREDADA is designed to fit models # HR1000Z, # HR1000Z-R, # HR2500, # HR6500, and # HR8500.
view full answer... - Will the Thule Passage 2 Bike Carrier # TH910XT Fit on a 2008 Dodge CaliberThe Thule Passage 2 Bike Carrier, # TH910XT, will fit your 2008 Dodge Caliber as long as your Caliber does not have a plastic rear spoiler. If your Caliber has no spoiler or a metal spoiler that is part of the body of the car, then the Passage bike carrier is an excellent choice. If your vehicle has a plastic spoiler at the top of the hatch, I would not recommend using a trunk mount bike carrier. Trunk mount bike carriers place additional weight on spoilers and plastic spoilers were...
view full answer...![]()
- Trailer Hitch Recommendation For 2011 Acura TSX Sport WagonIn my research of your 2011 Acura TXS Sport Wagon, I found the towing weight capacity of your vehicle is 1,000 lbs. Tongue weight is about 10 percent of the towing weight capacity so that would explain why your vehicle has a hitch available with a 1-1/4 inch receiver opening. The hitch we offer for your TSX is the Curt Trailer Hitch, part # C11085. It does have a receiver opening of 1-1/4 inches. All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with...
view full answer... - How to Carry 4 Bikes on a 1992 Honda Civic HatchbackCurt does state that some bumper fascia trimming may be necessary to install their Class I Trailer Hitch, # C11209, on your 1992 Honda Civic Hatchback. There will be a small piece on the underside of the bumper fascia that may need to be notched to clear the vertical plate on this hitch, however, the trimming will not be readily noticeable. It is possible to carry 4 bikes on your Civic, but, the only trailer hitches available for your car are Class I trailer hitches. It is not recommended...
view full answer...![]()
- Hitch Recommend for Carrying Bike Rack on 2016 Toyota Prius V Does Not Require Stabilizer StrapThe ideal solution for carrying the Hollywood Rack bike rack part # HR2500 with your 2016 Toyota Prius V is to use a trailer hitch that does not have the stabilizer strap requirement. For that the Draw Tite part # 24847 would be perfect. If you already have the Curt # C11276 which does have this requirement you will need the strap part # 18050. You would have to run the strap above the spoiler to the hatch door seam.
view full answer...
Do you have a question about this Hitch Bike Rack?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality hitch bike racks for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate hitch bike rack information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Jeffrey L
Written by:
David L
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Sarah W
Updated by:
Daron K
Updated by:
Jonathan S
Updated by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.