Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This pin replaces the Hitch Tite anti-rattle hitch pin for your Saris bike rack with a hollow 2" shank. Pin helps reduce movement and noise of the rack in your hitch. Includes anti-rattle pin, hitch insert, and hardware.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, it's Evangeline here at etrailer and today we're taking a look at the replacement Hitch Tite anti-rattle hitch pin for your Saris bike racks with two inch shanks, here at etrailer. So you have your bike rack and you're ready for adventure, but maybe you've lost the bolt for the anti-rattle assembly. And you still wanna make sure that it doesn't shake around as you drive around or maybe you cross threaded your bolts or just need a replacement part. This is gonna be the replacement part for you. I'm gonna show you how to assemble it onto your bike rack but also explain the differences between those different anti-rattle options so you get the right part for you. So this is the assembly we have on our current bike rack.
We have an anti-rattle bolt. We also have the hitch tightener on the inside of the shank, and we have this lock. So this is not included with your kit. With your replacement parts, you are going to have the tightener and you have the bolt, but you do not have a lock. So, for your newer Saris racks if you do wanna use your old lock with the new hitch tightener, it will not fit.
So, that's something to keep in mind. You may have to use a different replacement part, if this feature is what you're looking for. You notice that this bolt is shorter than the bolts included with most of your newer bike racks. And if you have, let's say, wiring or a bracket to the side of your hitch, and you're limited on space, this might be why you also want this replacement piece, because it has a shorter bolt, and doesn't take up as much space. So I have an extra part here to show you exactly how to replace your old assembly.
So here is our old block and you can see that it's definitely distorted compared to our nice new one. The reason this happens is if you forget which side it's on, and you insert your bolt from the wrong side. So someone put this here, into their shank, and then they put the bolt here and as they tighten down on the block it started warping it. And then you lose that anti-rattle effect. This is designed to work with your Saris bike racks but it will work with any rack that has an open or hollow hitch receiver, where the hitch pin hole is an inch and 1/2 away from the end of your hitch receiver.
This pops into the shank, and there's a tab that helps hold it up to that lip. Now that tab is not foolproof. You still have to be careful with where it is, because if you push it too far in, it falls straight through the shank. Now get your shank into the hitch receiver and line up that hitch pin hole. You're gonna use a three quarter inch socket or wrench to tighten that bolt down. And then you use your pin to secure that bolt. And that's how you replace your anti-rattle assembly on your Saris bike rack. So if you have a hollow shank and you realize that your tightening block is warped or cross threaded, this is gonna be the part for you. Remember, this does not include a lock, so you may have to pick up a separate bolt if that also needs replacing but those are included with keys. And that was a look at the replacement Hitch Tite anti-rattle assembly for your Saris bike racks with two inch shanks right here at etrailer..
Average Customer Rating: 4.5 out of 5 stars (34 Customer Reviews)
This pin replaces the Hitch Tite anti-rattle hitch pin for your Saris bike rack with a hollow 2" shank. Pin helps reduce movement and noise of the rack in your hitch. Includes anti-rattle pin, hitch insert, and hardware.I have eight different ball mounts. This fits NONE of them - it's far too large to slide in the square opening of the ball mount as shown in the video.
It may fit bike racks or other 2" hitch accessories with very thin walls, but for any ball mount - forget it. Etrailer shouldn't be recommending this as a ball mount anti-rattle device.
This is one of the best features of Saris racks IMO so I was happy it was available as a separate part when I needed to add a hitch extender to clear the spare tire on the back of my Jeep. The extender now tightens firmly against the receiver and the rack tightens against the extender. Even with the extra length and a fat bike on the rack, there is no shaking or rattling. Highly recommended!
After one year I am still pleased with this gadget. It performs exactly as expected. I bent the little tab out of the way for my application. It works great. And yes, I would recommend it to my friends especially since 2" hitch stability comes up quite frequently in our conversations.
Simple. Effective. Inexpensive.
Kody is pleasantly surprised by the little tab that holds the Saris Hitch Tite inside the ball mount. See pointy finger.
Kimber is pleased with the decreased vibrations and sounds under her paws as we tow. See paws.
Buy one for every ball mount you have!
I was searching for a specific replacement lock made by Saris, who manufactures bike racks that are hitch mounted and I couldn’t find the item anywhere. Even Saris didn’t offer it on their website or in a catalog. After an exhaustive google search tuned up a hit at etrailor.com , I was able to locate the parts.
The key part was an insert for a standard hitch that eliminates rattling and has threads to accept a pin you can tighten with a pin that is threaded and allows you to attach a lock so your expensive road bikes don’t disappear when you park at a restaurant.
When you aren’t carrying bikes m there is a bolt with a pin so you can keep the insert secure when the bike rack is removed. So the bottom line is etrailer.com carries all the obscure parts for anything related to hitches and towing, which is nice so you can fix the problem at home and don’t have to take it in to a shop. The website is very well designed and you can search their catalog online, then order those tricky parts for your vehicles.
I did try looking on everything from Amazon, trailer parts outlets and it took a targeted google search to find the part here. Save yourself some time. If it involves anything for a hitch... start at etrailer.com!
I bought a Saris Thelma 3 was having trouble finding the 2 inch adapter for it. I found it through etrailer and they delivered it very promptly very happy with the product thank you etrailer
This is an excellent product
It tightens up the hitch mounting and makes for a much more quiet ride.
I just wish that manufacturers would standardize on thread sizes.
Anti Rattle Hitch was received in a timely and favorable manner. Easy to install and performed as advertised!
George is the best! He continues to follow up about my item ordered and when it shipped. Thank you, George!
Great Product, completely takes the wobble out of hitch mounted bike rack.
Ordered the new kit after having problems with the original kit. The new kit works great! I’ve used it for a year now and love it! Thanks!
Jack M.
2/5/2021
Great!
Saris hitch snugger arrived 2 days early and installed perfectly. With the new bolts the carrier feels solid as a rock.
Perfect replacement for what I list
The item is as advertised. I did not need it as the Saris HD base included one. No hassle return.
Great product, but Saris should embed this into the construction of the hitch mount so that it doesn't get lost.
Meh. Works OK for as long as it stays tight, which in my experience isn't all that long.
Not the product I thought would fix the rattle
Exactly as stated. pin worked fine
Steve T.
3/24/2018
No problems at all - thanks for the follow up !
Thank you for your prompt service. I was very happy to find this product online--had made an effort to find locally and could not do so.
Great product. I used it over the past weekend, the tugging and banging was gone
Speedy delivery! Excellent web purchase experience! Keep up the good work!
Install easy and works great wish I would of bought a long time ago.
Great service! Great prices! Thank yo u!
As advertised
Thanks
Met all requirements
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
12/28/2017
Will,Thank you for your review,This anti-hitch rattle kit is not for ball mounts. It is only for saris Saris Bike Racks with 2 Shanks.