Hitch Extender with Step for 2" Trailer Hitch Receivers 18"

Hitch Extender with Step for 2" Trailer Hitch Receivers 18"

Item # RP11006

lowest price pledge

Retail:$300.24

Our Price: $134.33

You Save: $165.91
Hitch Adapters

This item qualifies for Free Shipping

Shipping Weight: 26 lbs

Quantity: 
In Stock, Ships Today
Reese Fits 2 Inch Hitch Hitch Adapters - RP11006
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed


  • Hitch Extender
  • Fits 2 Inch Hitch
  • 18 In Extension
  • Reese
  • 4000 lbs GTW
  • Steel
18" Trailer Hitch Extender with Step Call 800-298-8924 to order Reese hitch adapters part number RP11006 or order online at etrailer.com. Free expert support on all Reese products. Guaranteed Lowest Price and Fastest Shipping for Hitch Extender with Step for 2" Trailer Hitch Receivers 18". Hitch Adapters reviews from real customers.


  • All Info
  • Reviews (5)
  • Q & A (12)
  • Videos (2)
  • Photos
  • Why etrailer?

Reese Hitch Adapters - RP11006

18" Trailer Hitch Extender with Step


Features:

  • Prevents hitting trailer or propane tanks when making sharp turns while towing
  • Extends hitch 18" from center to center of hitch pin holes
  • Features step that provides easy access to truck bed
  • Load rating GTW 4000 lbs; Tongue 400 lbs
    • Load rating with weight distribution equipment: GTW 6,500 lbs / TW 650 lbs


Note: The limiting factor is the capacity of your hitch. Using an extender will reduce your hitch's overall capacity by 50 percent.




11006 Hitch Extender with Step for 2" Trailer Hitch Receivers 18"






California residents: click here


Video of Hitch Extender with Step for 2" Trailer Hitch Receivers 18"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Reese Hitch Extender with Step Review

Hey, guys, Randy here at etrailer.com. Today we're taking a look at the Reese hitch extender with step. This is going to allow us to move our hitch pin hole back 18 inches, plus give us a step to help us gain access to the roof, maybe over our tailgate, or even into an in-bed camper. Now, a couple of other ways our customers have mentioned they like using this step, one guy mentioned in a boat, being able to step up here first, and then step onto your boat makes it a lot easier to get in and out. But I've also seen people use these on the front of the vehicle, if you've got a front-mount hitch. Standing on this can allow you to get into the engine bay a little bit easier and do service, or get up to the windshield and clean it off properly.Now, not only do we get an 18 inch extension from pin hole to pin hole, but we also have a nice step.

Now, the step itself is nice and sturdy. We can get up on, there's no flex or not give to the steel. There's going to be a little bit of movement, just in the play that we have there at our receiver tube, but it's going to be do a great job. This is going to allow us to get up into the in-bed campers. It's going to allow us to reach in and over our tailgate, or gain access to roof racks and get those items loaded and unloaded.We have really nice heavy-duty construction here.

We showed you the solid shank, the entire extender and step is going to have a nice heavy black powder coat finish on it. Grip tape here at the top to prevent any slipping. Then you can see the chrome covered plastic, kind of a bezzle around here, it kind of cleans up that look, and they also give you a plug that goes inside of here, and that keeps that 2 inch by 2 inch receiver tube opening nice and clean. When it's time to secure items, we're going to use the 5/8 diameter pin hole, you can see it here on the side. There's plenty of room around that, so you want to choose a Class III pin and clip, maybe a locking hitch pin or even an anti-rattle device, they're all going to work out really well.

You can to go along with that 5/8 inch diameter pin hole here on the outside, our receiver tube opening's going to be 2 inches by 2 inches, and will work out really well with Class III ball mounts or accessories. The step itself is going to offer 17 inches in width and 6 inches in depth.Another good measurement to keep in mind will be the distance from the leading edge of the step to the center of our hitch pin hole. That's going to help determine whether it gets it out far enough for your step to be usable. It's going to be 13 1/4 inches.Something else that I like about this when compared to some of the other ones that we have, you can see this nice heavy-duty steel shank. That's going to prevent any failure at all, definitely more sturdy than the hallow shank designs we see out of some manufacturers.To get it installed, it's going to go in just like a regular ball mount and any other Class III accessory.

We'll slide it in, get those pinholes lined up. We want to secure it with a pinning clip. Keep in mind you do want to have your own pin and clip. If you don't already have one, just get one on our website there. Get that in and in place, everything's going to be nice and secure. Now, there's a little bit of movement associated with it once installed. If you want to eliminate that, pick up one of the anti-rattle devices that we have. You'll want to use a collar style, or a wrap-around style because that solid shank won't allow an internal type.Now, here's one of the many problems we run into. Our accessory and the spare tire are too close together, and we can't get the bike rack properly installed. Here you'll see with our extender installed, you've got more than enough room to operate our bike rack, maybe a cargo carrier. Plus we have the advantage of the step to be able to get up on the rooftop of our vehicle, get into our in-bed camper or gain access over that tailgate.Now, the hitch extender itself is going to be rated for 400 pounds worth of tongue weight, that's the maximum downward force we can put at the receiver tube opening, and a 4,000 pound gross trailer weight rating, so total weight of your trailer and anything that you're going to load up on it. It's rated for use with weight distribution. When using weight distribution, the tongue weight goes up to 650, gross trailer weight rating's going to go up to 6,500. But when we use this extender, it's going to reduce our hitch's capacity by 35%. So, we're going to use whichever's lower, either the maximum of the extender or 65% of your hitch's rating.That will conclude our look at the Reese hitch extender with step.


Customer Reviews

Hitch Extender with Step for 2" Trailer Hitch Receivers 18" - RP11006

Average Customer Rating:  5.0 out of 5 stars   (5 Customer Reviews)

18" Trailer Hitch Extender with Step

- RP11006
by:

I received the item fast, and it was better than I thought it would be. The extender is very solid and it is a Reese. I would not hesitate to order again from etrailer. thanks. 74158



- RP11006
by:

Just what I needed. Good quality, good customer service. 467751



- RP11006
by:

Great transaction! Super fast delivery, and nothing comes fast to Leadville! Informative staff helped me choose the right item the first time. Couldn't be happier with the experience.. Glad I called, why use the internet when you can talk to a friendly staff and the order gets processed faster? I will call again 376838



- RP11006
by:

This 18 inch extension was perfect for what I needed, & the step makes launching my boat on shallow ramps a lot easier to do by myself. My boat is exceptionally heavy, & this unit handled the extra weight without a hitch ( no pun intended)! I noticed no noise or rattle while trailing my boat, even on rough, gravel roads. I highly recommend this product. Madison at Etrailer.com did an amazing job getting my order to me in a very timely manner, even though this particular product was not in stock when I placed my order. Jon M. 248371



- RP11006
by:

The hitch extention was just as expected and received early! 15842


5
5

Ask the Experts about this Reese Hitch Adapters

Do you have a question about this Hitch Adapter?


  • What Does It Mean When Hitch Adapters State They Cut Hitch Capacity In Half
  • When using the Reese Hitch Extender # RP11006 (or any similar adapter) the weight capacity of your trailer hitch is reduced by 50 percent. This just means that when you're using the extender the TorkLift SuperHitch Trailer Hitch Receiver # TLC1205 that you purchased, which features a 17,000 pound towing weight capacity and a 1,700 pound tongue weight capacity, will have its capacities reduced to 8,500 pounds and 850 pounds respectively. This is due to the extra movement that adding another...
    view full answer...

  • Trailer Hitch Extender with a Step to Use on a Truck with In-bed Camper and to Tow a Trailer
  • We actually have an extension that is 18 inches long, and has a built-in step on it. Take a look at # RP11006. Like you have said, by using the extension the tongue weight capacity of the hitch is reduced by 50 percent. But as long as the tongue weight of the trailer does not exceed the reduced capacity you should be fine. I would also urge you to disconnect the trailer before stepping on the step because the combined weight of a person on the step and the trailer tongue weight could...
    view full answer...

  • Will Trailer Hitch Mount Hitch Steps RHS2 Clear a Palomino Slide-in Camper in a Truck Bed
  • What you are going to want to do is wait until your husband is busy and then take a measurement on the truck and hitch. You will need to measure from the center of the hitch pin hole on the truck straight back to the distance required to clear the camper. If that measurement is less than 6-1/2 inches then the hitch stairs, # RHS2, will clear the obstruction. If it will not then you have some options. You can use a hitch extender. However, keep in mind that using a hitch extender will...
    view full answer...

  • Trailer Hitch Extension to Tow a Boat Trailer with a GMC Sierra 2500 with a Lance Camper
  • I take it that your Lance camper overhangs the truck bed so you need an extension of some kind. There are a couple of possible solutions. Many extensions will reduce the tongue weight capacity of a trailer hitch by 50 percent. However if you were to use a long ball mount, the capacity is not nearly as affected. A ball mount like # 80232 measures 16 inches from the center of the hitch pin hole to the center of the ball hole. I have linked a video review for you. I have also linked all...
    view full answer...

  • Would the Hitch Extender # RP11006 Work for Towing a Boat Trailer
  • The Hitch Extender # RP11006 that you referenced will provide you with 18 inches of extension and has GTW rating of 4000 lbs and a tongue weight rating of 400 lbs. If your boat trailer weighs less than both of those figures the extender itself would work. However, when you use a hitch extender like this you end up cutting the capacity of the hitch by 50 percent so you will need to be sure that the vehicle you have has twice the capacity needed.
    view full answer...

  • Will Using Reese Hitch Extender and Step w/Weight Distribution Reduce Hitch Tongue Weight Capacity
  • I put in a call to Reese about hitch extender # RP11006 to get this cleared up. First, it can be used with weight distribution and is rated for 650 pounds tongue weight and 6,500 pounds gross trailer weight when you do just like you said. Even if the tongue weight capacity of the hitch was reduced from the weight distribution capacities, since your hitch is rated for 1,200 pounds tongue weight, the reduced capacity would be 600 pounds. The 485 pounds estimated tongue weight is certainly...
    view full answer...

  • Hitch Extender for a 2007 Chevy Silverado 2500HD Short Bed Towing a Horse Trailer
  • When you use a hitch extension in a 2 inch or 1-1/4 inch receiver it will reduce the tongue weight capacity of the hitch by 50 percent. But if you have a 2-1/2 inch receiver the tongue weight capacity is not reduced but usually the capacity of he extension is lower than the hitch so you would go by the lower rating. If you have a 2-1/2 inch receiver opening you can use the Titan extender # RP45292 at the 24 inch length. That will give you a capacity of 6,000 pounds; 8,000 when using...
    view full answer...

  • Availability of Adapter to Lower Height of Trailer Ball Mounted on Towing Bumper of 2005 Ford F150
  • If you are speaking of a towing bumper where the bumper itself has a hole in it where you can install a trailer ball, there is no adapter available that would lower the ball. However, if you installed a frame-mounted trailer hitch like the Hidden Hitch # 87195, you could use a ball mount that would place the trailer ball at the perfect height. Once the hitch is installed, you can measure to determine the rise or drop of the ball mount needed to level the trailer. I have linked you...
    view full answer...

  • Trailer Hitch Extension for 1-1/4 Inch Trailer Hitch with 1-1/4 Inch Receiver at the End
  • We do have hitch extenders for 1-1/4 inch hitches that have a 1-1/4 inch receiver at the end. Brophy 6 inch extender # hes6 is one option. And there is a 10 inch version, # hes0. Please note that the use of an extender will reduce the tongue weight capacity of the trailer hitch by 50 percent while also putting more stress on the hitch and where the hitch is attached to the vehicle.
    view full answer...

  • Using Reese Titan Hitch Box Extension on 2001 Chevrolet Silverado
  • It sounds like your Lance camper overhangs the truck bed so you need an extension of some kind. There are a couple of possible solutions. Many extensions will reduce the tongue weight capacity of a trailer hitch by 50 percent. However if you were to use a long ball mount, the capacity is not nearly as affected. A ball mount like # 80232 measures 16 inches from the center of the hitch pin hole to the center of the ball hole. I have linked a video review for you. I have also linked all...
    view full answer...

  • Does Reese Hitch Extender and Step have to Be Removed from Truck if Not Towing
  • No, you don't have to remove the hitch extender and step # RP11006 when not towing it you don't want to. The only exception is if your state or local laws prohibit leaving accessories in the hitch when not in use. New York comes to mind.
    view full answer...

  • Recommended Hitch Mounted Pickup Step Usable with Tailgate Down
  • The HitchMate TruckStep Extendable, Hitch Mounted Step for 2" Hitches - 9" x 6" - 500 lbs # HE4045 is the only extendable step we carry that reaches that far. We do have hitch extenders that have the step for that same purpose like the Reese Hitch Extender with Step for 2" Trailer Hitch Receivers 18" # RP11006 or the Brophy Hitch Extender with Step - 2" Hitches - 19" Long - 6-1/2" x 17" Platform # ST12. These won't extend quite as far out from the tailgate to give you the same angle with...
    view full answer...


Do you have a question about this Hitch Adapter?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch adapters for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch adapter information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Alexander C
Installed by:
Cole B
Installed by:
Randy B
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.