Patriot Hitches Drop Hitch Stacked Receivers for 2" Hitches - 10" Drop/Rise - Red Accent

Video Transcript for Review of Patriot Hitches Hitch Adapters - Stacked Receivers 2 Inch - PH43NR

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this Patriot Hitches Drop Hitch with Stack Receivers. Now this drop hitch with Stack Receivers has been designed by a US Military Veteran to slide into your two inch trailer hitch receiver and really give you the ultimate towing experience with flexibility and hauling versatility. You're gonna get these multiple two inch receivers. You're gonna get one, two, three, four, five 2 inch receivers to be exact.

And this is going to obviously let you mount your ball mount, your tow bar, your bike rack, cargo carrier, and a bunch of other things all at various heights. This has a gross towing weight of 25,000 pounds and a maximum tongue weight of 2000 pounds. And this is going to give you a maximum drop or rise of about 10 inches. So this is super adjustable. You're just going to remove the stacked receivers and mounted on the shank wherever you want to get a different drop or rise.

So you'll just like, for instance, I have this at the lowest setting here, the maximum drop, but if you wanna adjust, this is called the cartridge actually, if you want to adjust this, you'll just remove this pin and clip and then you can just move this and mount it on this shank. Wherever it you're, the best height adjustment that you're looking for is going to be. Now you can mount this horizontally as well when you're not using it for towing. And you, and, and when you flip this horizontally, it can be used as a hitch step, which is a great feature that's included with this. You're not gonna have to worry about rattling because these do, this does include these two stainless steel bolts that are gonna keep your accessories from vibrating or rattling around in there.

It does come with a hex wrench here, so this is going to allow you to tighten it up to get that vibration out. So again, another great feature that's included here. This is very sturdy. This is constructed of solid steel and it's covered in a textured powder coat finish. I think the finish is gonna hold up pretty well from my limited experience with it.

It's gonna do a great job, I think, of fighting off rusts and corrosion. If you notice our pins and clips are coated in red in this particular model. There are other models with different color options available such as blue or color match to the finish here. The red looks great, it's a great pop of color. Just be aware that the over time, it could flake off a little bit, especially when you're using the clips with the pins, you're removing them off and on. That's gonna flake off a little bit from time to time. So just be aware of that. That's gonna be normal with these pins and clips, but it's a great addition of color. Let me go ahead and give you some measurements just so you have a good idea of the size of this unit. So I'm gonna get my tape measure here to give you the height first of all. So looking at the height, looks like we're sitting pretty close to 13 and a quarter inches tall. And then looking at the overall length from just end to end right at 10 inches. And then measuring from the center of the first hitch pin hole to the center of the accessory hole, lining that up there underneath the pins right at five inches. And then moving down to the second hitch pin hole on center right at about six and a half inches. And then from the center of the second hitch pin hole to the end of the shank, lining that up there. It looks like we're sitting right at about an inch and a half. So hopefully those measurements are helpful for you. The pins are five eighths of an inch. Instructions are also included to guide you through the very easy setup. Like I said, we do have other shank size options, other color options as well. So quite a few options here from Patriot Hitches if you're looking for something that's slightly different than what we've got here today. Well that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.