Price: $14.87

Anti-Rattle Hitch Pin for 2" Trailer Hitches

Item # SHP2061

lowest price pledge

Our Price: $14.87

Orders above $50 qualify for Free Shipping

Select Ground or 3 Day Shipping for delivery before Christmas

Quantity: 

In Stock
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

lets go aero hitch pins and clips pin fits 2 inch anti-rattle for trailer hitches
lets go aero hitch pins and clips pin 5/8 inch diameter

Customer Photos

lets go aero hitch pins and clips pin fits 2 inch shp2061
lets go aero hitch pins and clips pin fits 2 inch anti-rattle for trailer hitches

Videos


  • Fits 2 Inch Hitch
  • Hitch Pin
  • 5/8 Inch Diameter
  • Lets Go Aero
This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories. Call 800-298-8924 to order Lets Go Aero hitch pins and clips part number SHP2061 or order online at etrailer.com. Free expert support on all Lets Go Aero products. Guaranteed Lowest Price and Fastest Shipping for Anti-Rattle Hitch Pin for 2" Trailer Hitches. Hitch Pins and Clips reviews from real customers.



Lets Go Aero Hitch Pins and Clips - SHP2061

This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories.


Features:

  • Anti-rattle pin reduces play and vibration in the hitch connection
    • Place block with spring inside ball mount or hitch accessory shank
    • Insert pin through hitch pin hole and anti-rattle block with spring
    • Tighten pin so ball mount or accessory is pulled tight against side of hitch receiver wall
  • Sturdy steel construction
  • Hitch pin can be turned into secure hitch lock with snap-on padlock (ACC3250 - sold separately)


Specs:

  • Application: 2" x 2" trailer hitch receivers
    • Ball mount or hitch accessory must have a hollow shank
  • Pin diameter: 5/8"


Note: This device can only be used with hollow-shank ball mounts and hitch accessories.


The anti-rattle Silent Hitch Pin from Let's Go Aero takes the rattle and play out of the connection between your trailer hitch and your ball mount or hitch accessory. The unique design features a sturdy steel block with an attached spring that is designed to sit inside the shank of your hitch-mounted accessory.


Silent Hitch Pin Diagram

Place the block inside your ball mount or hitch accessory and line up the hole in the block with the pin hole in your ball mount. Slide your ball mount into your hitch and insert the hitch pin. To activate the anti-rattle device, just tighten the pin. Doing this will pull the accessory up against the wall of your hitch receiver, thus keeping the accessory from moving around inside your hitch. No more annoying clanking or vibrating.



SHP 359 Let's Go Aero Silent Hitch Pin Antirattle Device for 2" Trailer Hitches

Replaces SHP 2061







Related Products



Customers compare SHP2061 to these similar products





Customers Who Purchased This Hitch Pins and Clips Also Bought...







Video of Anti-Rattle Hitch Pin for 2" Trailer Hitches


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Lets Go Aero Hitch Accessories SHP2061 Review

Today we're going to be taking a lot at part number SHP2061. This is the anti-rattle hitch pin for 2" trailer hitches from Let's Go Aero Hitch Accessories. This anti-rattle pin is going to reduce the amount of play and vibration in the hitch connection. All you have to do is place the block with the spring inside the ball mount or the hitch accessory shank. You can see here that that spring is tapped into the block. It's held in there.

You don't have to worry about that falling off. Once you have that inside of your accessory, all you have to do is insert that accessory into the hitch on your vehicle, thread in your anti-rattle bolt and then tighten everything down until it's pulled tight against the side of the hitch receiver wall. That's going to really help reduce the amount of wobble and vibration that you often experience inside of your hitch. This unit is made from a sturdy steel construction. The hitch pin can be turned into a secure lock system with a snap on padlock, part number ACC3250. That is sold separately. It would go on to the end of the pin right here, normally where the clip goes.

The clip is included, though. Again, this is designed for 2" by 2" trailer hitch receivers. Your ball mount or your hitch accessory must have a hollow shank in order for this to work. The pin diameter on the bolt right here is going to measure 5/8 of an inch. A few measurements that I want to go over real quick. I want to give you the overall length of the bolt. Measuring from edge to edge, it looks like it's going to be about 5-1/4".

From the bottom of the bolt head to the closest point where that clip installs, it's going to be about 4". From the bottom of the bolt head to the end of the pin is about 4-7/8". The threaded portion, this point here to this point here, is going to give us a measurement of about 1". From the bottom of those threads to where the pin installs is going to be about 2-1/2". We have a ball mount here today. In order to get this installed, all you have to do is place it into the hollow portion of the shank.

You're going to push it in until you get your pin holes to line up with one another. That spring inside is extending or expanding. That way it's going to hold that block securely inside of the shank. Once you have that installed, you can simply place that into the opening of your hitch. We're looking for our pin holes to line up with one another. Place the lock washer onto the anti-rattle bolt. We're simply going to place that in, making sure it goes through the block and spring. Then we'll go ahead and start threading that down. We're going to get it as tight as we can by hand. Then we're going to use a 7/8" socket wrench to tighten it down the rest of the way. Once we have that tight, we can install our clip on the other side of our pin. As you can see, that's going to reduce the amount of wobble and vibration that we'll have inside of our hitch. It pretty much takes out all side-to-side movement and up-and-down movement as well. That's going to do it for our review of part number SHP2061. This is the anti-rattle hitch pin for 2" trailer hitches from Let's Go Aero Hitch Accessories. .


Customer Reviews

Anti-Rattle Hitch Pin for 2" Trailer Hitches - SHP2061

Average Customer Rating:  4.9 out of 5 stars   (18 Customer Reviews)

This anti-rattle hitch pin dramatically reduces any movement or vibration between your hitch and ball mount. Designed for use on hollow-shank ball mounts and accessories.

- shp2061

by: Ila R.07/12/2017


I have a double hitch installed on the back of my Class C motorhome. The top hitch is for my bike rack and the bottom hitch is for my Blue Ox to tow my car. The entire assembly was VERY loose with A LOT of play. I installed the 2 Roadmaster Quiet Hitch anti-sway rings on the two bottom receivers which had the lips around the receiver. The top hitch did not have the lip so I installed the Silent Hitch Pin in it. All the hitches now have no movements at all and I am so happy with my purchases! I am a single traveling lady and if I can do it, so can you! Thanks etrailer for your great parts! 404772



- SHP2061

by: Darryl D02/25/2015


I was sick of the noise that the hitch made every time I drove over a pothole, speed bump etc so purchased one of the Anti-Rattle Hitch Pins from eTrailer - I should have done this years ago. The Pin works as advertised plus the service from Tommy was first class, as always!! 176077


Comments

After a year, still as good as on day one and still five stars!

Darryl D - 02/25/2016

16909

- SHP2061

by: Dan05/27/2016


the product is fine the information on my receipt is inadequate. i receive an email saying i have received my order but i have not received it. you send it ups to post office but dont include a usps tracking number. when i call and add another item you charge me shipping when you should have waved the shipping fee as i am still waiting for an item i ordered havent received n you say is already here. not good business 252219



- SHP2061

by: Bruce S.01/13/2017


This product is the real deal. If your like me, I researched this type product and studied over a dozen varieties and reviews. I finally selected this one as it had the least number of moving parts and looked sturdy. I couldn't be more satisfied. There is absolutely no rattle or sway in any direction and it is a breeze to install. Great service from Etrailer and great job on the design from LetsGoAero. 332356



- SHP2061

by: Bob K.04/06/2015


Solid product, very light weight for all steel construction. Deeper than most others. There were no directions in the box but it was obvious how it went together. While assembling some of the square holes for the lag bolts to set in were undersized (or the finish was making them smaller) so the bolts spun when putting on the nuts. Otherwise good. 183387



- SHP2061

by: Charles C03/08/2017


I'll simply say this about these anti rattle hitch pins. If you ever try one, you'll never use a regular hitch pin again. These things really take a lot of noise out of your head when you're pulling a trailer. I like them so well, I've recently purchased more of them as gifts for friends and family members that have trailer hitches. 349977



- SHP2061

by: Carlo P08/07/2017


Flawless.... a perfect fix to stabilize my hitch steps to my camper. Steps do not wobble any more. Easy to install and remove, highly recommend this product...could not be happier!!! thank you Carlo 417241



- SHP2061

by: David P.05/11/2017


Your anti-rattle hitch pin worked great on a 1500-mile round trip to southern Colorado. Reduced vibration on our receiver hitch carrier to near zero. Amazing product! 379129



- SHP2061

by: gbeech05/22/2016


Great product, keeps hitch very solid. I am using it on a wheelchair lift which can be very unstable when everything is not snug. This bolt helps keep it solid. 251130



- SHP2061

by: Pateuni10/11/2017


etrailer provides fast, accurate shipping, excellent product description and great video presentations. Product is high quality and works as promised. 441562



- SHP2061

by: John M07/10/2015


It is a beast--excellent product --arrived before I expected--they emailed me to notify--very good customer service--highly recommend. 210708



- SHP2061

by: Aaron P.11/19/2014


Just used product 11/18/14. Tightened snug to receiver and "no play or rattle". Served my purpose beautifully, glad I ordered two. 161807



- SHP2061

by: Bill R04/08/2017


This will make it so much easier to tighten up anything I slide into my reliever hitch, Looking forward to using this pin, 364696



- SHP2061

by: LHyer06/21/2015


Haven't had a change to take it on our long drive yet, but it was super easy to assemble. And on test runs it was amazing. 206150



- SHP2061

by: Tom06/11/2017


Simple solution for rattle of the hitch. Actually a great design, hats off to the designer. About a 20 sec install. 391765



- SHP2061

by: Russ B.07/03/2015


Great! Does the job. Sturdy and simple. Make sure you make it finger tight at first so it doesn't cross thread. 209197



- SHP2061

by: Tom B.09/26/2014


Item was delivered on time and works as intended. Thanks for the great service. 153264



- SHP2061

by: Bob K.04/06/2015


Great product for when you do not need a locking anti-rattle pin. 183388


19
19

Ask the Experts about this Lets Go Aero Hitch Pins and Clips
Do you have a question about this Hitch Pins and Clip?


  • Options on How to Fix a Loose 2 Inch Ball Mount
  • I have a couple different options on ways to fix a loose ball mount. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # 93347, wedges itself between the receiver and ball mount to take up play and eliminate rattle. The Roadmaster Quiet Hitch, # RM-061, helps eliminate rattle and sway within your hitch receiver.
    view full answer...

  • Anti-Rattle Hitch Pin for a 2-1/2 Inch Trailer Hitch Using a Reducer Sleeve
  • For the 2-1/2 inch trailer hitch using a reducer sleeve you will need an anti-rattle device with a longer pin to compensate for the wider hitch. I recommend the SilentACT # SHP2082 or XL device # SHP2040-XL. For either they function as anti-rattle devices and locks. If it were me I would choose the SilentACT because the cam lever makes installing and removing it much easier than a threaded locking pin.
    view full answer...

  • Options on How to Fix Loose Ball Mount
  • I have just the thing to fix a loose ball mount or drawbar. The Anti-Rattle Hitch Pin, # SHP2061, dramatically reduces any movement or vibration between your hitch and hollow shank ball mount. The No-Rattle Trailer Hitch Wedge, # 93347, wedges itself between the receiver and ball mount to take up play and eliminate rattle.
    view full answer...

  • Can the Lets Go Aero Anti-Rattle Hitch Pin be Used with Tow Bar
  • The Let's Go Aero Anti-Rattle Hitch Pin # SHP2061 that you referenced will work well for your with your tow bar to flat tow your Jeep. Your tow bar will need to have a hollow shank in order for the anti-rattle pin to work properly. I have attached a review video of this hitch pin for you. The # SHP2061 will work great to tow the weight of your Jeep. The hitch pin is designed to work with all Class III towing applications and has a weight capacity that exceeds the weight of your vehicle....
    view full answer...

  • Will the Lets Go Aero Anti-Rattle Device # SHP2061 Work w/ a 2 inch Hitch Extension
  • Yes, the Let's Go Aero Anti-Rattle Hitch Pin, # SHP2061, will prevent the extension from rattling inside the 2 inch hitch, as long as the extender you are using is hollow. Please note, that when using an extension, the tongue weight capacity of the hitch is reduced by 50 percent so the total weight of the bike rack and the bikes on it must be less than 50 percent of the tongue weight capacity that's listed on the identification sticker affixed to the hitch.
    view full answer...

  • Replacement Lock for Let's Go Aero # SHP2061 Anti-Rattle Hitch Pin
  • The # SHP2061 does have a replacement lock available, it is part # ACC3250.
    view full answer...

  • Anti-Rattle hitch Pin that Can be Used to Tow a Trailer
  • When towing a trailer you can use the Let's Go Aero anti-rattle hitch lock, # SHP2061. You can use # SHP2061 even if the pin does not go all the way through the shank. The clip is just a fail safe. Provided the pin is properly tightened down then the lock washer will provide tension to keep the bolt from backing out. The pin, if threaded all the way in, measures 4-1/2 inches from the outside of one pin hole to the tip of the pin. It is 3-3/4 inches to the notch for the clip so it would...
    view full answer...

  • Lock Recommendation for Anti-Rattle Bolt of Pro Series Eclipse Bike Rack
  • For a snap on pad lock that you can add to the anti-rattle bolt of your Pro Series Eclipse bike rack part # 63124 you would want the part # ACC3250. This has been confirmed as a fit for your bike rack and would work well. You will also need the part # SHP2061 with the lock.
    view full answer...

  • Recommended Anti-Rattle Locking Hitch Pin for the Lets Go Aero BikeWing
  • I do have an anti-rattle locking hitch pin for the Lets Go Aero BikeWing part # B01311 but the Anti-Rattle Hitch Pin for 2" Trailer Hitches part # SHP2061 will not work. Instead, you will want to use the SilentACT Anti-Rattle Trailer Hitch Receiver Lock part # SHP2082 as this locking hitch pin is specifically designed to be used with this bike rack. In order to secure the bikes to the rack you would want to use a cable lock like the Tow Ready Cable Lock part # 63233. I have included...
    view full answer...

  • How to Prevent a 12 Inch Receiver Hitch Extension From Rattling in Receiver
  • Adding an extension introduces another component in between the receiver and the ballmount or hitch accessory. Because of this, getting a certain amount of wobble is unavoidable. If you're using the extension for a hitch mounted accessory, you can use an anti-rattle device like part # BX88224. However, keep in mind that using an extender will lower the tongue weight capacity of your hitch by 50 percent. If you'll be towing, you'd be better off using a longer ball mount, if the longer...
    view full answer...

  • Anti-Rattle Device Recommendation for Use with MaxxHaul Carrier MT70106
  • What you would want is an anti-rattle device like the part # SHP2061 which will install in the shank of the # MT70106 and will take out the movement. I attached a review video for this for you to check out as well.
    view full answer...

  • Recommended Options To Fix Loose 2-Inch Ball Mount on 2017 Dodge Durango
  • We have a few options that help fix a loose ball mount on your 2017 Durango. First, check out the Anti-Rattle Hitch Pin, part # SHP2061. This pin reduces any movement or vibration between your hitch and hollow shank ball mount. Another option is the No-Rattle Trailer Hitch Wedge, part # 93347, that wedges itself between the receiver and ball mount to take up play and helps eliminate rattle. A third option is the Roadmaster Quiet Hitch, part # RM-061, helps eliminate rattle and...
    view full answer...

  • Recommended Cable Lock For Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Rack
  • We do not offer a lock that will work with the 5/8 anti-rattle bolt that came with your Pro Series Q-Slot Platform-Style 2 Bike and 4 Bike Rack, part # PS63138. Since the bike rack shank has proprietary threads, a standard non-threaded hitch pin like part # SHP2061 and # ACC3250 lock will not work. I recommend using a cable lock like part # CAB-10. You would just route the cable through the bike frames and then thread the cable through the safety chain loops on your trailer hitch.
    view full answer...

  • Recommended Anti-Rattle Hitch Pins For 2015 Chevrolet Tahoe
  • We have a couple of options for anti-rattle devices that will work for your 2015 Tahoe. If you have some room on the side of your trailer hitch I recommend the Lets Go Aero Hitch Locks, part # 63232. This is used in place of the standard pin and clip. This has a barrel-style lock and comes with 2 keys. These hitch locks do require a hollow shank. For a non-locking anti-rattle hitch pin I recommend part # SHP2061.
    view full answer...


Do you have a question about this Hitch Pins and Clip?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch pins and clips for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch pins and clip information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Laura H
Photos by:
Jim W
Expert Research:
Jeffrey L
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.