Price: $7.00

In Stock

Pin and Clip For Class III, IV and V Trailer Hitch Receiver

Item # PC3

lowest price pledge

Our Price: $7.00

Hitch Pins and Clips

Orders above $99 qualify for Free Shipping

Quantity: 

In Stock
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

draw-tite hitch pins and clips fits 2 inch 2-1/2 pc3
draw-tite hitch pins and clips pin
draw-tite hitch pins and clips pin 5/8 inch diameter
draw-tite hitch pins and clips pin fits 2 inch 2-1/2 clip for class iii iv v trailer receiver

Customer Photos

draw-tite hitch pins and clips pin fits 2 inch 2-1/2 pc3
draw-tite hitch pins and clips pin fits 2 inch 2-1/2 clip for class iii iv v trailer receiver
draw-tite hitch pins and clips fits 2 inch 2-1/2 pc3
draw-tite hitch pins and clips fits 2 inch 2-1/2
draw-tite hitch pins and clips pin 5/8 inch diameter
draw-tite hitch pins and clips pin fits 2 inch 2-1/2 pc3
draw-tite hitch pins and clips pin fits 2 inch 2-1/2 pc3
draw-tite hitch pins and clips pin fits 2 inch 2-1/2 pc3
draw-tite hitch pins and clips pin fits 2 inch 2-1/2 clip for class iii iv v trailer receiver

  • Fits 2 Inch Hitch
  • Fits 2-1/2 Inch Hitch
  • Hitch Pin
  • 5/8 Inch Diameter
  • Draw-Tite
In a hurry and don't have time to mess with keys? This might be your best option. You will no longer need to worry about losing the key to your lock. Call 800-298-8924 to order Draw-Tite hitch pins and clips part number PC3 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Pin and Clip For Class III, IV and V Trailer Hitch Receiver. Hitch Pins and Clips reviews from real customers.



Draw-Tite Hitch Pins and Clips - PC3

In a hurry and don't have time to mess with keys? This might be your best option. You will no longer need to worry about losing the key to your lock.


Features:

  • Fits 2" and 2-1/2" square receiver hitches
  • Includes retainer clip


Specs:

  • 5/8" Diameter pin
  • Overall length: 5-1/8"
  • Usable length: 4"


PC3 Draw-Tite Pin and Clip







Value - This item

Pin and Clip For Class III, IV and V Trailer Hitch Receiver


Pin and Clip For Class III, IV and V Trailer Hitch Receiver
Draw-Tite Hitch Pins and Clips

489 reviews

Code: PC3

In Stock

Our Price: $7.00


  • Hitch Pins and Clips
  • Hitch Pin
  • Fits 2 Inch Hitch
  • Fits 2-1/2 Inch Hitch
  • 5/8 Inch Diameter
  • Draw-Tite


In a hurry and don't have time to mess with keys? This might be your best option. You will no longer need to worry about losing the key to your lock.

more information →
Compare Similar Products
Economy
Price: $3.62
$3.38 Less

Curt Pin and Clip For Class III, IV and V Trailer Hitch Receiver with Rubberized Plastic Grip


Curt Pin and Clip For Class III, IV and V Trailer Hitch Receiver with Rubberized Plastic Grip
Curt Hitch Pins and Clips

109 reviews

Code: C21510

In Stock

Our Price: $3.62


  • Curt


This 5/8" diameter pin fits both 2 and 2-1/2" square receiver hitches. Includes retaining clip. Rubberized plastic coated ends help with secure grip for easy installation and removal.

more information →
Value
Price: $10.60
$3.60 More

Master Lock Pivot Lock Hitch Pin for 2" Hitches - 5/8" Diameter - Stainless Steel


Master Lock Pivot Lock Hitch Pin for 2" Hitches - 5/8" Diameter - Stainless Steel
Master Lock Hitch Pins and Clips

36 reviews

Code: ML1465DAT

In Stock

Our Price: $10.60


  • 3 Inch Long
  • Master Lock


Use this pivot-lock hitch pin for your next trip. This all-in-one hitch pin's adjustable barrel means no lost clips when removing your hitch-mounted accessories. Simply insert the pin, pull the barrel, and turn the barrel to the secured position.

more information →
Premium
Price: $29.29
$22.29 More

Super Titan Trailer Hitch Pin and Clip for 3" Receivers


Super Titan Trailer Hitch Pin and Clip for 3" Receivers
Reese Hitch Pins and Clips

3 reviews

Code: 58388

In Stock

Retail:$45.18

Our Price: $29.29


  • Fits 3 Inch Hitch
  • 3/4 Inch Diameter
  • Reese

Related Products



Customers compare PC3 to these similar products





Customers Who Purchased This Hitch Pins and Clips Also Bought...







Video of Pin and Clip For Class III, IV and V Trailer Hitch Receiver


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Hidden Hitch Hitch Accessories PC3 Review

Today we're going to take a look at the Hidden Hitch Pin and Clip, number PC3. This pin and clip set works with the Class 3, 4, and 5 trailer hitch receivers. It fits a 2-inch receiver and a 2 -inch receiver. It has a 5/8-inch diameter pin. It is 5 1/8-inch in length from here to here as you can see that right there, and it does include this retainer clip that would just, this groove right here you would put that clip on like that. To give you a better idea of how that works we'll bring out our receiver hitch demonstrator, and one of our receiver covers.

You would just put that in like so, and then just slide that through, clip that off and you're good to go. That should just about do it for our Hidden Hitch Pin and Clip set, number PC3.


Customer Reviews

Pin and Clip For Class III, IV and V Trailer Hitch Receiver - PC3

Average Customer Rating:  4.7 out of 5 stars   (489 Customer Reviews)

In a hurry and don't have time to mess with keys? This might be your best option. You will no longer need to worry about losing the key to your lock.

- PC3

by:


I installed the hitch plate, it was real easy. Took me longer find a wrench, than it did to install the hitch plate. I'm thrilled with the quality of the plate and how easy it was to deal. 32267



- PC3

by:


Quality Products & Quality Service This is my second time ordering from etrailer.com. I am so pleased with the selection, pricing, and customer service, that I will look here first before ordering products elsewhere. I have not yet tested the process of adding the Thule ski carrier to my Thule bike rack (our snow melted but is forecasted to return this week); however, I foresee no issues. I love the Thule rack and the ski carrier appears to be of similar quality. The hitch receiver cover was of even greater quality than expected, and a huge hit. As confirmed with etrailer.com customer service before ordering, the pin/clip were exactly what was needed to secure the cover. The order shipped out earlier than expected and because it was close to the holidays, the shipping speed was upgraded at no cost. All in all, a terrific experience with etrailer.com. I should close by saying that I do not regularly submit product/business reviews, but feel compelled to do this one because of the wonderful service and quality products. Happy holidays! J 4137



- PC3

by:


Great Video guides on how to install everything. Made installation a breeze. Super fast shipping was shipped day I ordered it! Got everything and well boxed everything in good condition. Great company to work with I usually dont leave feedback but these guys did everything right!. Thanks etrailer! 130454


Comments

Great stuff and everything works fine. FYI you guys do a great job and your help videos really helped with me installing the hitch. God bless!

Wade - 05/18/2015

11796

- PC3

by:


Extremely poor design. Do NOT purchase this junk! Go to a hardware store and get a real one. This pin has no hole for a cotter pin. The weak spring clip is unreliable at best. I would not take a chance on a clip design like this. 108039


Comments

I do not use this pin. Instead, I use a pin with a cotter pin hole in it.

jd - 11/22/2014

7793

- PC3

by:


Was easy to in stall the carter pin and PC3 after installing. will order from etrailer again! 76919


Comments

Great product. It has been over a year and it is still in excellent condition and holding up well. Would order from etrailer againl Thanks Etrailer

Paula - 10/30/2014

7503

- PC3

by:


Good quality 130637


Comments

You are welcome for the review, it was honest. After having your product for one year I have not had any issues or concerns. Everything performs as it should. I would most definitely use you again should the need arise.

Paul G - 05/08/2015

11507

- PC3

by:


What can I say? The pin fits in the hole, and the clip fits on the pin. Can't ask for much more than that! 140644


Comments

They are all working great, thanks. No complaints.

JR - 07/20/2015

13480

- PC3

by:


This is actually the second one of these I've installed. I helped a friend put one on his 06 Outback and it was really easy. So when I needed one for my 05 Outback I knew where to buy one. Super-simple installation and looks good too. 372752



- PC3

by:


Does it's function, but did not seem secure. It could be tampered with easily. Replace it with a locking pin. 188892


Comments

Everything works fine

Joe G - 04/29/2016

17649

- PC3

by:


Fits great, no negative issues at all. 99681


Comments

Everything is working perfectly and if needed in the future, I will return, thank you

Lambo54 - 09/15/2014

6838

- PC3

by:


Good quality 121168


Comments

Thanks for the follow up. Im pleased to report everything is working as expected. Great product and service!

Frank p - 03/23/2015

10270

- PC3

by:


Great basic pin and clip! may upgrade to locking one later. 115453


Comments

Thanks, Patrick every thing was great and working fine. Charles

Casey R - 03/03/2015

9817

- PC3

by:


To Whom it May Concern: I highly recommend etrailer.com com. I ordered a trailer hitch and bike rack by phone. The sales agent was professional, competent, helpful and friendly. The prices of the products are fair and the delivery was timely and arrived in good condition. It is rare to have a purchase experience of the level of high quality that I experienced with etrailer.com. I am highly recommending this company to others, based on my first experience with them, and I would not hesitate to purchase from them again. 4 stars out of 4. Thank you. Jim B., Falmouth Maine. 292811



- PC3

by:


After installing this product to my hitch cover to keep it in place I drove 1 1/2 hours on the highway to visit family. When I got to my destination I checked my new hitch cover to make sure everything was ok and saw that the cotterpin had jostled itself loose and the pin itself almost fell out too. If this had happened I would have lost the hitch cover too. When I insatlled the cotterpin and the pin everything was tightened securley, I don't know how the cotterpin came loose since I was only driving on the highway. This is a very poor product and recommend not purchasing this item. 101936



- PC3

by:


GOOD 135424


Comments

GREAT-NO PROBLEMS-STILL DOES THE FOR WHICH IT WAS INTENDED

DAN W - 06/13/2015

12493

- PC3

by:


Very good piece of hardware. 115230


Comments

Pin and clip work fine.

Joe S - 01/30/2015

9091

- PC3

by:


works fine 129331


Comments

Fully satisfied

Randy K - 05/06/2015

11442

- PC3

by:


Got the hitch in 2 days and installed it myself in about 15 minutes. Holes lined up perfectly. I slid a jack stand under each side to hold it up until I could get the bolts in. Everything went better than expected. Wow. Thanks for a great hitch that looks great! 52050



- PC3

by:


The hitch was the correct one for the car, and the cable harness and receiver was correct also. Delivery was extremely fast: ordered on Wednesday, delivered on Friday. All necessary parts were included, including instructions for torquing down the bolts. I installed the hitch, 'without a hitch' on Saturday. It took about an hour, since I don't have any air tools. All in all, I am very satisfied, and would recommend your company. Thank you. 206208



- PC3

by:


We got this so we could open our tailgate without having to unhitch the trailer. It works great! Product is good, service was fast... it made our trip to Alaska much happier (our dog needs the tailgate lowered so she can jump in and out for potty breaks). We still need to have the truck and trailer pretty much straight in line with each other... if there is too much angle left or right, we can't fully lower the tailgate. We drive a 2015 Ford F-150. 400542



- PC3

by:


Purchased Hidden Hitch Class 3, 2" hitch for my 2007 Honda CRV along with wiring harness and ball mount. Not the handiest person in the world but after installing this hitch, my handy-ego has been inflated. The videos on the website are spot on and are a huge resource for installation. Support during the sale and after were much appreciated. This is one of my top five e-commerce experiences. Well done etrailer.com! 94528



- PC3

by:


The women staff are very good at helping the customers and following through all the way to your door step. I have ordered and installed many hitches from E-trailer and I have not been sorry yet. I even had one wiring electronic kit fail and they were very fast gettiing me a new and better replacement at no cost to me. Super if you need a hitch better get hitched to etrailer.com! 46853



- PC3

by:


When you Google "customer service" etrailer has to be first in line! They care and they want it right! In addition, my new hitch sleeve insert/cover is the highest quality I have seen. Talk about rock solid! etrailer is the first place I am going to go for all of my trailer towing needs. Top of line people, outstanding products and very competitive pricing. I'm all in! 292388



- PC3

by:


You can not beat the price, the excellent people who follow up (George), and the service you will get from etrailer.com. Exceptional as I stated in my trailer hitch cover review. Love this company and the people. Please do not waste your time with Amazon or Ebay. They have the part, they will back up the part, and will provide an excellent service! 212456



- PC3

by:


This was the first time I bought trailer parts on line Etrailer.com had everything I needed, The service was ( most important) Quick . the only thing I made a mistake make sure you order all the parts you need at the same time. You will save on shipping big time. I will certainly deal with E- trailer in the future. David 261716



- PC3

by:


This is my second purchase from eTrailer.com. Their web site is easy to navigate and you are able to order what you need even if you don't know the first thing about trailer hitches. Their deliveries are always fast and accurate as well. Our next vehicle is just about ready for towing. Thanks eTrailer. 147309



- PC3

by:


Purchased with a Draw-Tite hitch that has the bracket welded to the cross member. No sweat to install onto hitch. Remember to mount the bracket to the hitch before installing hitch. Also, the vertical tab with the slot must face the rear of the truck to accept the plug from the wiring harness. 441987



- PC3

by:


I ordered a Class V ball and ball mount with pins. This is for the 2.5 inch heavy duty receiver. I needed a set-up for pulling an emergency services boat that weighs over 18,000 lbs. I was able to get a set-up rated at 20,000 lbs, in stock. Shipping was fast and quality looks good. 412973



- PC3

by:


etrailer is a very great company to deal with. The video's they supply step by step on how to put the hitch on your own vehicle are very helpful. Plus the video uses your own model vehicle & year model. The price was very fair. I would recommend this company to anyone needing a hitch. 396311



- PC3

by:


Ordering and receiving these products online was one of the easiest purchases that I have ever made. The quality of the products exceeded my expectations, and they were delivered exactly when they told me that they would be. This is my second purchase, and I hope to make several more. 9709



- PC3

by:


This pin works well. Only downside is the retainer clip just goes over the pin. I would prefer the retainer clip goes through a hole in the middle of the pin but the way this one is made should work. Just seems more secure on the types of pins where the clip goes through the pin. 161650



- PC3

by:


One of those gotta have things when you are towing. The reduced retainer spring clip groove diameter makes it much easier to install and remove the spring clip than those with a through hole. Show little/no wear after a couple of cross country trips and misc. local tows. 302212



- PC3

by:


Did not realize pin did not have hole for cotter pin to go through. Would not have purchased if I had known this, i don't trust this set up at all for a trailer. Might be good only to hold a hitch cover in place. Due to price of shipping and pin its not worth returning, 45631



- PC3

by:


This pin is very heavy duty. The only downside about it, and this is a personal preference and has nothing to do with the quality of the pin, was the key just slips into the groove and not through the pin. I pulled a trailer from California to Georgia without a hitch. 27195



- PC3

by:


The hitch cover leaves a gap between the receiver and the cover whic would allow dirt to enter and will rattle. I needed one more foam spacer to correct this problem, or the pin hole needs to be in a different location so the cover will be tight against the receiver. 30240



- PC3

by:


It's a pin, it fits, it works. My only concern is that the clip MIGHT fall off of pin if it was inadvertently bumped....for this reason it might be better if the pin had a hole through which one threaded the clip.....much harder to lose the clip that way..... 64890



- PC3

by:


Very sturdy product, installed on 2017 John Deere gator 825i. The gator receiver is right at the rear axles. This product allowed me to move point of hookup all the way out to the bumper. Now everything can be hooked up without crawling underneath machine. 353903



- PC3

by:


I found etrailers while searching for a very specific size of hitch, and they had just what I needed. The price was great, and they delivered the items much sooner than I expected. The quality of the parts is excellent. Good job, etrailers. Thanks! 339567



- PC3

by:


I have not had the opportunity to use the products yet but wanted to say that my experience with etrailer.com has been excellent! Very responsive, expedited the shipping and followed through with e-mail. It is hard to get that kind of service today!! 11191



- PC3

by:


Found exactly what I was looking for at etrailer. I purchased an 18" hitch extender to aid in launching my skiff. I paid for 3 days shipping and it arrived in 3 days along with the accessories I ordered. All products very well made and did the job. 246446



- PC3

by:


I got this pin, because I wanted a spare. I had read a blog that one person's pin sheared, and he was happy that he had a spare. I actually have a spare receiver, ball, and pin, but it doesn't hurt to have extras. I hope I never have to use it. 117466



- PC3

by:


This is the 4th complete hitching system I have ordered from Etrailer and I am sure it will not be the last. They make it easy to find the product you are looking for, or they are good at directing you to the right parts for your application! 120589



- PC3

by:


Great product. I was able to extend my Gators rear hitch by Eighteen inches allowing me to pull my trailer to clear the brush from a recent storm. Great service from etrailer. Thanks for your in finding a difficult to find products. 202945



- PC3

by:


Great quality product, item exactly as described. Quick shipping, prices are good. Easy to follow instruction videos on the website. I highly recommend etrailer.com for any trailer related needs! Ian, a very satisfied customer 400890



- PC3

by:


Solid pin for heavy, 2" hitch. Buy if you don't have worries about theft. If used for an over-the-road application, get the locking variety. On our farm, we have a need for quick changes and with no theft, this pin is perfect! 58609



- PC3

by:


The pin is a good fit to the ball mount and receiver. The clip attaches it securely. I also bought the ball mount 2093 which is an excellent product sturdily made and an excellent fit to the 2" receiver on my 2009 Ford Ranger. 103474



- PC3

by:


simple and strong. 129316



- PC3

by:


The trailer hitch was easy to install and works great. The etrailer customer service reps really know their stuff. I would recommend etrailer to anyone interested in a trailer hitch and associated equipment. 242687



- PC3

by:


I am only rating this item poor because I don't really use it. I upgraded to a locking pin. I just did not feel safe with this pin. I use it as an emergency back up if I ever can't use the new locking pin. 333324



- PC3

by:


ALL PRODUCT I HAVE ORDERED HAS BEEN GREAT, AND THE DELIVERY WAS SUPER QUICK. I WOULD RECOMMEND ETRAILER TO ANY OF MY FRIENDS. SOME OF THERE PRODUCTS ARE A LITTLE PRICEY BUT SOMETIME YOU PAY FOR CONVIENCE 464788


55
495
Show More Reviews

Ask the Experts about this Draw-Tite Hitch Pins and Clips
Do you have a question about this Hitch Pins and Clip?


  • Will Hitch Extender # HE18 Allow Camper to be Towed with Tailgate Down
  • The Roadmaster High-Low Hitch Adapter, part # RM-048-2, is intended for leveling a tow-bar when flat towing a vehicle behind a motor home. It cannot be used to tow a camper. You might be able to use part # HE18, which is a hitch extender. This item adds 18 inches to the length of the receiver but also cuts in half its tongue weight capacity. You will need to make sure that the combined weight load of what you intend to place in your vehicle plus the weight of your towed camper does not...
    view full answer...

  • Adapter to Go From 3 Inch Hitch of 2017 Ford F-250 to 2 inch HItch
  • If the truck you buy does have a 3 inch hitch installed on it the Super Titan Adapter Part # 38735 would be the correct adapter as it will slide into the hitch and provide you with a 2 inch hitch. A standard hitch pin that you would have for the 3 inch hitch would be all you need to secure the adapter like part # 58388. Then for a pin for the 2 inch hitch you would want the part # PC3.
    view full answer...

  • Recommended Trailer Hitch Pin for a Class III Trailer Hitch with 2 Inch Receiver
  • The Curt Trailer Hitch, # 13514, is a Class III trailer hitch with a 2 inch receiver so you will need a 5/8 inch diameter pin just like you suggested. For a standard pin and clip, we have # PC3 or # C21510. For a locking pin we have the Trailer Hitch Receiver Lock, # 7683.
    view full answer...

  • What is the Difference Between Max Carrying Capacity and Weight Distribution Capacity
  • Absolutely, I am here to help! The max carrying weight of a hitch is how much the hitch can pull if you were to just hook your trailer up to the hitch and not use a weight distribution system. The Gross Trailer Weight or GTW of this hitch is 5,000 lbs. and the Tongue Weight or TW of this hitch is 500 lbs. The GTW is how much weight the hitch can pull behind it and the tongue weight is the downward force that the tongue of the trailer applies to the hitch of the tow vehicle. So the hitch...
    view full answer...

  • What Towing Package Is Available For 2008 Toyota Highlander
  • You will want to check your owners manual or with the Toyota dealer for the gross towing weight capacity of your 2008 Toyota Highlander to make sure the towing capacity is not exceeded. Even if the hitch will have a higher weight capacity than your vehicles gross towing weight capacity the towing capacity is determined by the lowest weight capacity in your whole towing setup. The Draw-Tite Class III 2 Inch Hitch, # 75726 that you have referenced is a good choice for your 2008 Toyota...
    view full answer...

  • Dimensions of the B&W Tow and Stow 3-Ball Mount
  • The B&W Tow and Stow ball mount # BWTS10049B will have some great features. You can stow the mounting platform that has the 3 hitch balls (1-7/8, 2, and 2-5/16 inch) underneath your vehicle. This is nice because you will eliminate the possibility of hitting your shins while working around your hitch. The adjustable height will allow you the ability to tow trailers of different heights. The maximum drop is 7-inches and maximum rise is 7-1/2 inches. They are adjusted in 1-inch increments. I...
    view full answer...

  • Comparing Class III Receiver for 2012 Subaru Outback
  • Draw-Tite #75673 has 7 inch distance between the receiver hitch pin hole and the furthest rearward portion of the rear bumper when installed on a 2011 model Subaru Outback Wagon. Although the hitch will attach to the vehicle using existing holes in the frame, a 1-1/8 inch hole saw will be needed to drill an access hole in the frame member on both the driver and passenger side. This hole is necessary in order to feed installation hardware into the frame as shown in the install instructions...
    view full answer...

  • Which Trailer Hitches Will fit a 2002 Ford E150 Econoline Van
  • There are several hitches available for your 2002 E-150 Econoline Van. I have posted a link below of all of the hitches available. I would recommend the Draw-Tite Trailer Hitch for the 2002 Ford Van, item # 75703. This hitch is economically priced and can tow up to 6,000 pounds or 10,000 pounds with a proper weight distribution system, if your van has sufficient towing capacity. If you need a hitch with more capacity the Curt Class IV Trailer Hitch, item # 14055, will install on your...
    view full answer...

  • Why Does my 2 Inch Hitch have a 1/2 in Pin Hole and a 5/8 in Pin hole
  • The Curt Pin and Clip # F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an anti-rattle device like the Draw Tite J-Pin # 63201. I attached a picture of this device being used on a hitch like yours for you to check out. I also attached a review video for this product for you to check out also. This 1/2 inch hole is not designed to be use as a hitch pin hole, you will want to use...
    view full answer...

  • Safety of Using Hitch Extender and Other Options To Clear Spare Tire on Jeep Liberty
  • Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part # HE06. The other option to provide additional clearance from your spare tire would be to use a longer ball mount. For this, I would recommend Hidden Hitch Ball Mount, part # 80232, which places the center of the hitch ball 16 inches from the center of the hitch pin hole. If your ball mount requires a larger rise...
    view full answer...

  • Which Class III Trailer Hitch Receiver for 2008 Toyota FJ Cruiser
  • We offer two different trailer hitch receivers for your 2008 Toyota FJ Cruiser (so long as it does not have the auxiliary fuel tank option), the Draw-Tite # 75461 and the Curt # 13367. Both offer the same 2-inch receiver opening, 500-lb tongue weight rating and 5000-lb tow rating. Both install without drilling or welding required. I have included a link to the hitch page for your FJ Cruiser where you can see these products. Installation videos are included. It is not advisable to weld...
    view full answer...

  • What Trailer Hitch Will Fit On A 2007 Grand Caravan With Stow-N-GO Seating
  • You will need the Hidden Hitch Trailer Hitch, # 75305, which will work on the 2007 Dodge Caravan with Stow-N-GO seating. It is a Class III hitch and has a towing capacity of 3,500 lbs. with a tongue weight of 350 lbs. On the 2007 Dodge Caravan with Stow-N-GO seating the Hidden Hitch Trailer Hitch, # 75119, that you have referenced will not work. Also needed is a Draw-Tite Ball Mount, # 2923, a Pin and Clip, # PC3, and a hitch ball. The hitch ball you need will depends on the size...
    view full answer...

  • Surco Cargo Carrier # 52018F vs. CURT Cargo Carrier # C18153
  • The first thing I would do to determine which fold-able cargo carrier would be the best for you would be to measure the distance from the center of the hitch pin on your vehicle out to the furthest point our of the rear bumper. This measurement will tell you which cargo carriers will be able to be folded up once installed on your hitch. The Curt Cargo Carrier # C18153 has a distance of 9 inches from the center of the hitch pin out to the nearest portion of the carrier when folded up....
    view full answer...

  • Recommended Trailer Hitch Receiver for 2017 Ford Explorer with Hands Free Lift Gate Sensor
  • Both the Draw-Tite # 76034 and Curt # C13100 trailer hitch receivers that are designed for your 2017 Ford Explorer will allow the hands free lift gate sensor to work. However, you will need to activate it by putting your foot to the side of the hitch receiver opening with both hitches. The sensors will not recognize your foot through the hitch unfortunately. I've linked videos of both hitches being installed for you. If you're going to be towing a trailer with the Explorer and need...
    view full answer...

  • Trailer Hitch Options for a 2012 Honda CR-V Towing a Small Trailer
  • We have had a chance to install the Curt Trailer Hitch, part # C13119, on a 2012 Honda CR-V so I attached a link to the installation video for you to check out. I also attached a picture from the installation instructions for you to check out as well. You may also be interested in the Draw-Tite Trailer Hitch, part # 75742. This hitch will have about the same visibility under the bumper as the Curt hitch, but the crossbar begins to recede under the vehicle beginning at the receiver....
    view full answer...

  • What Size Hitch Pin Hole is on the Curt Class V Trailer hitch # C15318
  • The Curt Class V trailer hitch, # C15318, has a 5/8 inch diameter hitch pin hole. You can use pin # PC3. Or for a locking hitch pin I recommend # 7683. I have included a link to a video review for you.
    view full answer...

  • What Is The Difference Between Curt Trailer Hitch # 13084 and # 13160
  • The only difference between the Curt Trailer Hitch # 13084 and the Curt Trailer Hitch # 13160, is the shape of the tubing. Curt Trailer Hitch # 13084 has a square-tube design while the Curt Hitch # 13160 has a round-tube design. The square-tube hitch will be more visible on the back of your Jeep while the round-tube hitch will be tucked up just a little more. The round-tube hitch is designed to be a more sleek design. Both the Curt Hitch # 13084 and # 13160 have the same towing and...
    view full answer...

  • Availability of Hitch Pin For 2 Inch Trailer Hitch Receiver
  • The two sizes of hitch pins that I carry are 1/2 inch and 5/8 inch. A 2 inch hitch receiver will use the 5/8 inch hitch pin like the Hidden Hitch Pin and Clip, part # PC3. I am including a link to a page of the 5/8 inch hitch pins that I carry. The Class I 1-1/4 inch hitch receivers will use the 1/2 inch hitch pin like the Draw-Tite Pin and Clip, part # PC2. The Softride Replacement Hitch Bolt with Lock Washer, part # SR25879, that you have referenced will only fit the QuietRide stainless...
    view full answer...

  • What is the Purpose of a Trailer Hitch Ball, Trailer Hitch Pin, and a Clip and are All Necessary
  • A hitch ball and a hitch pin and clip each serve a different purpose. A hitch ball, like # 19247, attaches to the ball mount, like # 2923, using a large nut that threads on from the bottom, kind of like a nut and bolt. This ball is what the trailer coupler attaches to. The hitch pin goes through the ball mount and the trailer hitch and the clip keeps it from coming out while traveling. There are also locking hitch pins that use a lock and not a clip like # 7683. Basically, you will...
    view full answer...

  • Is Factory Bumper Hitch Removed to Install Curt Class III Hitch # 13301 on 2014 Chevrolet Silverado
  • The Curt Class III Hitch for your 2014 Chevrolet Silverado 1500, part # 13301, does require removal of the OEM light-duty bumper hitch. Both hitches cannot be installed at one time. I have linked the installation instructions; I have also included a video showing installation of the Curt 13301 on a 2013 Silverado. Also provided are two articles that may be helpful; one covers general installation tips and the other specifically covers the process for cleaning out weld nuts prior to hitch...
    view full answer...

  • Light-Duty Tow Package Setup for a 2016 Mazda CX-5
  • We have everything you need to tow your small trailers with your 2016 Mazda CX-5. I have listed all of the parts that I recommend below. Class II Trailer Hitch - # C12170 4-Flat Wiring Harness - # 118563 Adjustable Ball Mount - # MT70068 Hitch Ball - # 63845 (2in.) # 19260 (1-7/8in.) Hitch Pin - # PC3 To start, you will need a trailer hitch. I recommend the Curt Class II Trailer Hitch, # C12170, because it will have more than enough capacity for the CX-5 and the trailers. The...
    view full answer...

  • Trailer Hitch and Wiring for a 2016 Toyota Sienna XLE
  • For your 2016 Toyota Sienna XLE I recommend Curt trailer hitch # C13105. This is a Class III trailer hitch with a 2 inch receiver. If you plan on doing some towing with the hitch the recommended ball mount is # C45067. It has a 2-1/2 inch rise and 3-3/4 inch drop. For a 2 inch ball I recommend # 40038. For a 2-5/16 inch ball I recommend # C40007. And for a hitch pin I recommend the classic # PC3. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
    view full answer...

  • Ball Mount and Hitch Ball for Draw-Tite Class III 2 Inch Hitch # 75270 on 2005 Honda Odyssey
  • On your 2005 Honda Odyssey with a Draw-Tite Class III 2 Inch Hitch, part # 75270, the recommended ball mount is the Draw-Tite Ball Mount, part # 2753. It has a 2-3/4 inch rise or a 4 inch drop. You will also need the Pin and Clip, part # PC3, to attach the ball mount to your hitch. The ball mount will use a hitch ball with a 1 inch shank diameter. The hitch ball size will depend what size coupler is on your trailer. The most common size is a 2 inch hitch ball like the Tow Ready 2 Inch...
    view full answer...

  • Will a Modified Garnish or Bumber Cover be Needed for Hitch Installation on a 2011 Acura MDX
  • Installation of the Draw-Tite Trailer Hitch, item # 75614, on your 2011 Acura MDX, will not require the purchase of a bumper kit. The hitch will install with the receiver just below the rear fascia of your MDX. We have a Photo of the # 75614 hitch installed on a 2008 MDX for your reference. Some items you may need to complete your Class III towing setup are listed below. Wiring, # 118424 2 Inch Hitch Ball, # 19247 Ball Mount, # 2923 Pin and Clip, # PC3 Rubber Tube Cover, # I-728
    view full answer...

  • Recommended Hitch and Towing Accessories for 2012 Honda Odyssey
  • Due to the larger selection of available hitch mounted accessories like ball mounts, bike racks and cargo carriers, we always recommend choosing the Class III 2 inch receiver over the 1-1/4 inch Class II receiver whenever the choice is available. Because of this, I would recommend the Draw-Tite Class III Receiver, part # 75270. To complete your towing system, you will also need: Tow Ready Trailer Wiring Harness, part # 118521 Ball Mount, part # 2753 1-7/8 inch Trailer Ball, part...
    view full answer...

  • Availability of Rear Mount Trailer Hitch for 2012 Honda Pilot
  • The 2012 Honda Pilot should have been equipped with a factory trailer hitch, which is why you're unable to find an aftermarket model. Check the rear bumper fascia for a removable panel or door that is hiding the hitch receiver. Once removed, the receiver tube should be visible. If you crawl under the vehicle and look up at the underside right behind the rear bumper, you should be able to see the hitch. If your friend is planning on using the hitch for towing, a trailer wiring harness...
    view full answer...

  • What Weight Distribution And Sway Control for Jeep Commander Towing A 7,000 Pound Car Hauler
  • The first thing to do before you start towing is to always check the owners manual or the car dealer for the GCVWR (Gross Combined Vehicle Weight Rating) of your vehicle. The GCVWR is the maximum allowable weight capacity for your vehicle, including the vehicle, trailer and contents. You will need to check the hitch on your vehicle to make sure it has the correct weight capacity. Also, if you can add weight distribution to your hitch, to tow your 7,000 lb. trailer. The class or weight...
    view full answer...

  • Trailer Hitch-Ball Mount-Ball and Safety Chain for Towing a Camper Trailer with a 2001 Tacoma
  • The replacement safety chain you will need depends on the weight of your camper trailer. The 48 inch long safety chain, # 2114-553-04, would be a good choice as long as the loaded gross weight of your trailer does not exceed 6,000 lbs. and you use the safety chain as 2 chains. If the clevis style hooks will not work on your vehicle, that S-hooks on the safety chains mentioned should work well. If you are worried about the chains coming loose, you could use a quick link, # 6590-044-04,...
    view full answer...

  • Correct Wiring Harness For 2008 Ford Escape Limited With Backup Sensors
  • The item you selected Tow Package Wiring Harness, part # 118251, will not work on vehicles equipped with backup sensors. You would need to use the T-One Vehicle Wiring Harness, part # 118551, which draws power for your trailer lighting directly from your vehicle battery instead of the electrical system. You will need to plug part # 118551 directly into the vehicle wiring behind each tail light and then run the included wire and make a connection to the battery via included in-line fuse....
    view full answer...


Do you have a question about this Hitch Pins and Clip?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality hitch pins and clips for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch pins and clip information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Video Edited:
Jacob T
Expert Research:
Adam R
Updated by:
Laura H
Video Edited:
Dustin K
Test Fit:
Shane T
Video Edited:
Chris R
Installed by:
Hayden R
Photos by:
Zach O
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.