Heavy Duty Truck Hitch

/

Draw-Tite

/

16000 lbs GTW

/

2 Inch Hitch

/

Class V

/

44 Inch Wide

Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2"

Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2"

Item # 41990

lowest price pledge

Retail:$196.51

Our Price: $105.47

You Save: $91.04
Heavy Duty Truck Hitch

This item qualifies for Free Shipping

Shipping Weight: 42 lbs

Arrives before Christmas with Ground or 3 Day Shipping.
Quantity: 
In Stock, Ships Today
Draw-Tite Weld-On Hitch - 41990
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately. Call 800-298-8924 to order Draw-Tite heavy duty truck hitch part number 41990 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2". Heavy Duty Truck Hitch reviews from real customers.
  • All Info
  • Reviews (10)
  • Q & A (126)
  • Photos
  • Why etrailer?

Draw-Tite Heavy Duty Truck Hitch - 41990

  • 16000 lbs GTW
  • Draw-Tite
  • 2 Inch Hitch
  • Class V
  • 44 Inch Wide
  • 1600 lbs TW
  • No Drop
  • Weld-On Hitch

Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately.


Features:

  • Universal-fit trailer hitch lets you tow a trailer with your heavy-duty or commercial vehicle
    • Designed for full-size trucks with long wheel bases and heavy-duty suspensions
  • Computer-aided steel construction ensures strength and durability
  • Oversize safety-chain loops are easy to access
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Weld-on installation
    • Side brackets (sold separately) are required for installation
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Cross tube dimensions: 44" wide x 3" deep x 3" tall
  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 16,000 lbs
    • Maximum tongue weight: 1,600 lbs
    • Not for use with weight distribution systems
  • Limited lifetime warranty




Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41990 Draw-Tite Ultra Frame Service Body Receiver - Cross Tube Only - Universal - Class V - 2"



41990 Installation InstructionsInstallation Details 41990 Installation instructions


California residents: click here



Customer Reviews

Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2" - 41990

Average Customer Rating:  4.7 out of 5 stars   (10 Customer Reviews)

Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Weld-on mounting brackets sold separately.

- 41990
by:

Etrailer's part of this purchase was great. Shipped quickly and well packaged. The problem was with the manufacturer ... Draw-Tite. The hitch is great except for one thing ... the stickers look like a drunk slapped them on. It may sound trivial ... but I have spent countless hours building a custom expedition vehicle I am proud of. I now have to remove them because they look like crap. 726009


Comments

Your expedition vehicle sounds awesome! There is one sticker on the hitch that lists the towing and tongue weight capacities. If possible, I recommend leaving that sticker attached for safety reasons.

-- Victoria B - 11/22/2019

63481

- 41990
by:

Mitsubishi FUSO fe Looking to install this hitch. 541347



- 41990
by:

Company was great with helping me find the right hitch for our church bus. We have been very pleased with the quality of the hitch! We pull a 12' loaded trailer to south Texas each year and the hitch performs great. Thanks for all your help! 480115


Comments

Hitch is still working well! We have had no problems with it and the quality has been great!

Frank - 03/01/2019

50015

- 41990
by:

Great product. But even better Sevice from etrailer as usual. Always a great buying experience. 458316



- 41990
by:

Easy to use and it works great! 442155



- 41990
by:

quality product 195157



- 41990
by:

This weld-on receiver was the perfect choice for adding a receiver to our tandem dump truck. I couldn't be happier! 154726



- 41990
by:

The product was in stock, delivered in a timely manner, and exactly as advertised. E-Trailer even upgraded the delivery at no extra charge. The hitch has a Made in Mexico sticker. The welds look good; much better than welds on most Chinese import goods. Very pleased. 116815



- 41990
by:

The product and shipment was just what Etrailer said it would be. 87463



- 41990
by:

excellent, fast and friendly service, I couldn't ask for more! 39917


10
10

Ask the Experts about this Draw-Tite Heavy Duty Truck Hitch

Do you have a question about this Heavy Duty Truck Hitch?


  • Trailer Hitch for 2015 Ford E-350 Cutaway
  • To use the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 on your 2015 Ford E-350 Cutaway you are going to need to measure to determine if you need the 7" Weld-On Bracket Kit # 4907 or 16" Weld-On Bracket Kit # 4916 because this hitch is not designed for one specific vehicle. Simply measure from the top of the frame on your E-350 to the bottom of the bumper. If you need less than 5-9/16" to clear the bumper you will use 7" brackets # 4907; if you need less than...
    view full answer...

  • Trailer Hitch for 2002 Thomas Saf-T-Liner Bus
  • There is a way for you to add a trailer hitch to your 2002 Thomas Saf-T-Liner bus although there are none mounted vertically onto the frame, they will use brackets to mount to the frame which can be bolted or welded on. What you need is the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990 so long as your bus has a frame which is up to 44" wide, because that is the length of this crosstube. If your bus has a frame up to 62" you will need the 62" wide crosstube, the...
    view full answer...

  • Hitch Recommendation for 2017 Ford E-350 Cutaway Box Van
  • Sounds like you have a box van. I wish I could recommend one of our custom fit hitches as a guaranteed fit for your vehicle but in reality we can't. Best option would be a multi fit hitch that you could modify as needed. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets...
    view full answer...

  • High Capacity Trailer Hitch Recommendation for RV Built on 2001 Ford E-350 Cutaway Chassis
  • The best higher capacity hitch solution we'll have for a 2001 RV built on a Ford cutaway chassis will be a multi-fit hitch like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Trailer Hitch Solution for 1999 Chevy Box Truck
  • I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box-truck body like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Trailer Hitch Solution for 2017 Ford F-350 with 34 inch Frame
  • 34 inch wide trailer frame indicates you have a cab and chassis F-350, which we do have solutions for that. But if you have an RV built on a F-350 frame then we don't have a fit that I can guarantee will fit since the rears of those are quite a bit different in dimensions than most vehicles and vary from motorhome to motorhome. The # 41947 will fit a 2017 F-350 Cab and Chassis and it is a Class IV hitch though. If your Ford isn't a motorhome this would be a great option. The other...
    view full answer...

  • Measurements of Draw Tite Trailer Hitch # DT45507
  • The mounting holes on the Draw Tite hitch part # DT45507 that you referenced are separated by 40 inches from left to right and the hitch opening will be 1-1/2 inches below the frame surface the hitch attaches to.
    view full answer...

  • Trailer Hitch for 2019 Fort Transit T350 Cutaway
  • Since you have a 2019 Ford Transit T350 with a cutaway chassis, you will need a universal fit hitch which you will need the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube # 41990, which is 44 inches wide, or # 41991, which is 62" wide. This will depend on the width of your T350 frame so you will want to measure to ensure you get the tube which is long enough. You will then need to add brackets to weld the hitch on, either the 7" Weld-On Bracket Kit # 4907 or 16" Weld-On...
    view full answer...

  • Recommended Trailer Hitch for 2008 Ford E-450 Shuttle Bus with 42-1/2 Inch Frame Width
  • For your 2008 Ford E-450 I recommend taking a look at the Draw-Tite Universal Ultra Frame Trailer Hitch # 41990. This is a weld-on hitch that will fit vehicles that have frame widths of up to 44 inches. You will just need to add the 7" Weld-On Bracket Kit # 4907 for installation, which will also drop the hitch down 7 inches so it can clear the rear bumper. The Class V hitch features a 2 inch receiver opening, a 16,000 pound towing capacity, and a 1,600 pound tongue weight limit. There...
    view full answer...

  • Hitch Solution for 2007 GMC Savana 3500 on Cutaway Chassis
  • Cutaway chassis are hard to fit hitches to since they are installed on motorhomes or cargo vans like yours. Because of that we don't have any custom fit applications although we might have a couple universal type solutions. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a box van like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part...
    view full answer...

  • Possible High Capacity Hitch fit for 1999 Ford F-550 with Modified Chassis
  • I really wish we had a custom fit hitch but the best option would be a multi-fit hitch. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit an RV like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Is Draw-Tite Ultra Hitch part 41990-16 an Adjustable Width Hitch for Motor Homes
  • The Class IV Weld-On 44 Inch Hitch, part # 41990-16 is not adjustable. However, we do carry such hitches. You could use hitch part # 41991 if you need wider than 44 inches and if you need a more narrow setup, you could use part # 41990. You would then use either 7 inch tall hitch brackets part # 4907 or 16 inch tall brackets part # 4916, depending on far below the frame you need the hitch to sit.
    view full answer...

  • High Capacity Trailer Hitch Option for a Class A Motorhome
  • I have a universal fit hitch setup that would have more capacity, but you will need to make sure that the RV has the additional capacity you would require as well. A towing setup is only as strong as it's weakest component. You would want the multi-fit RV hitche like # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916 depending on which would work best on your RV.
    view full answer...

  • Trailer Hitch Recommendation for Fitting Bus with 40 inch Wide Frame
  • I have a great solution for you, but the Torklift hitch part # TLF1002 wasn't designed for use on anything but the vehicles it was made for and shouldn't be used on a school bus. Instead we have the Draw Tite Hitch part # 41990 which when used with the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916 would work well. The cross tube of this trailer is 44 inches in length too so it would be plenty long for a 40 inch wide frame.
    view full answer...

  • High Capacity Hitch Recommendation for a Motorhome Built on Ford F-54 Chassis
  • Since your vehicle is built on an RV chassis there is a solution for installing a hitch, but a custom fit is not available. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Trailer Hitch Recommendation for 2007 Ford F-450 with Service Body
  • Looks like you have a service body truck/van based on your pictures. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. I can't recommend the Torklift...
    view full answer...

  • Higher Capacity Trailer Hitch Recommendation for Cutaway Chassis 350 RV
  • For RV applications it's hard to fit hitches to them as the back of the RVs are all somewhat different and our hitch manufacturers don't go out and fit them all. Since you need a 7k capacity your best option would probably be a multi fit hitch. Multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • RV Hitch Recommendation for a Four Winds Built on a Ford E-350
  • Since you have an RV there is a solution for installing a hitch, but a custom fit would not work. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a RV like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Can Draw-Tite Weld-On Brackets be Bolted to the Frame?
  • I took a look at the directions of the 16" Weld-On Bracket Kit # 4916 and they can be bolted on. The accompanying photo is from the installation instructions which I've also linked for you and they show what is required, including Grade 5 or stronger 5/8" diameter bolts. These brackets are specific to Draw-Tite hitches # 41990 and # 41991.
    view full answer...

  • Trailer Hitch Recommendation for Service Body Truck/Van
  • Looks like you have a service body truck/van based on your pictures. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Recommendation for a Weld-On Trailer Hitch for a Freightliner Step Van
  • Your best option is either going to be going with a Curt hitch, # 15902, or going with one of the hitches with 16 inch brackets like # 41990-16. This hitch is closest to what you need. You will need to have a qualified professional welder perform the installation. I have included a link to the installation details for the Curt hitch for you.
    view full answer...

  • Hitch Availability for a Truck with Ambulance Body
  • I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit an ambulance body truck like yours are multi-fit hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. I also attached a link to a page that has all of the hitch extenders we carry. You should note that products like this cut the capacity of the hitch in half when used.
    view full answer...

  • Trailer Hitch Availability for a 2006 Ford E-350 with Service Body
  • I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body van like your 2006 Ford E-350 are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Trailer Hitch Fit for 2014 Ford E-350 Dually RV
  • I have a couple of trailer hitch options for your 2014 Ford E-350 Dually RV. However there is not a custom fit trailer hitch designed for your E-350 Dually. I recommend using the Draw-Tite Class IV Weld-on Ultra Frame Trailer Hitch Receiver # 41990. This hitch uses weld-on brackets, like the 7 Inch Weld-On Bracket Kit # 4907, to attach to the frame of your vehicle. The weight capacity of the hitch exceeds the 10,000 pound capacity you are looking for, and the receiver measures 2 inches...
    view full answer...

  • Hitch Recommendation for a Ford E-450 Bus
  • I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Trailer Hitch for a 2005 Freightliner MT45
  • While we do not have a custom fit hitch for your Freightliner MT45 we do have several heavy duty weld-on hitches that could work for you. I have included a link to all of them for you. Based on your frame width you could use # 41990 which is 44 inches long. Then for brackets you could use 7 inch brackets # 4907 or 16 inch brackets # 4916. If the frame is an I-beam frame then the only option is # 13703. Weld-on hitches should only be installed by qualified professional welders....
    view full answer...

  • Trailer Hitch to Fit Ambulance
  • I might have a solution for you, but we don't have custom hitches for ambulances. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body (ambulance) truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Recommended Replacement Weld-On Wings For Trailer Hitches
  • Thank you very much for your question, our intent is not to make your journey difficult on our site, but I am here to help. The part that you are looking for isn't a general purpose item, that's why it may take more time to locate on our site, it is more of a replacement part for a particular hitch correct? I have examples of the part you may be looking for: 7" Weld-On Bracket Kit for Draw-Tite Class V Ultra Frame Service Body Trailer Hitch # 4907 16" Weld-On Bracket Kit for...
    view full answer...

  • Trailer Hitch Option for Mitsubishi Fuso Truck
  • The Draw-Tite # 41990 would be a good choice for your truck pictured, as long as the outside to outside distance between the frame members isn't greater than 44 inches. You'll also need a weld-on bracket kit like part # 4907, which would give you a 7 inch drop from the underside of the truck frame members to the underside of the receiver tube.
    view full answer...

  • Which Draw-Tite Trailer Hitch Fits a Full Size 1988 Ford Bronco
  • The Draw-Tite Trailer Hitch, # 41990, is a weld together application for service body trucks. For your 1988 Ford Bronco, the correct Draw-Tite Hitch is # 40050. Please note it will not fit models with a roll pan bumper. I have included a link to the installation instructions for you. If you will be doing some towing, I recommend the etrailer Ball Mount Kit, # 989900, which comes with 2 ball mounts, 2 balls, a pin with clip, and a carrying bag. For trailer wiring, use CURT T-Connector...
    view full answer...


Do you have a question about this Heavy Duty Truck Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality heavy duty truck hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate heavy duty truck hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.