Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver - 20K - 12" x 11-1/4" Wings

Ask the Experts about this Draw-Tite Heavy Duty Receiver Hitch

• Recommended Heavy Duty Trailer Hitch Receiver For a 2002 Ford F-350 Super Duty
  The Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver # 38023 is a universal style hitch that is designed to be welded onto frames with a width of 33-1/2" to 34-1/2". I recommend going with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30 that is custom fit for your 2002 Ford F-350 Super Duty. There is no drilling or welding required to install this receiver. The hitch has dual receivers, one 2-1/2" and the other is 2". An adapter sleeve is included to reduce the...
  view full answer...
• Trailer Hitch Rated for 18,000 Pounds for a Motor Home on a 2007 Freightliner Chassis
  We have some hitches that could potentially work on your 2007 Freightliner chassis. But to get the capacity you are looking for it will have to be a heavy duty weld-on truck hitch, # 38023. This hitch only fits frame widths of 33-12 to 34-1/2 inches (frame width is measured outside to outside from one frame rail to the other). It also measures 10 inches from the bottom of the vehicle frame to the bottom of the receiver. Welding should be performed by a professional welder. A ball mount...
  view full answer...
• Hitch Extender Needed for Reese # 38023 Super Titan Weld On 3 Inch Hitch
  There is indeed an extender available, part # RP45018. However, in order to make it work, you'd need to use a reducer like the Draw-Tite # 58550. At the full 48 inch length, the extender will have a 4000 lb towing/400 lb tongue weight capacity.
  view full answer...
• Heavy Duty Trailer Hitch with 1.5K to 2K Tongue Weight Capacity for a 2013 Volvo VNL64T780 Tractor
  For your 2013 Volvo VNL64T780 tractor you will want to look at the various heavy duty truck hitches we offer which I have linked for you. These are all weld-on options and welding should be done by a professional welder. You will basically need to compare the available options to the frame width and style on the tractor to determine the best option. If none of the pre-made options work you could have a hitch made using some of our hitch fabrication parts which I have also linked. It...
  view full answer...
• Is there a Reese Super Titan Trailer Hitch that Bolts On for a 2004 Ford F-750 Funmover RV
  There is a bolt on version of the Draw Tite Super Titan trailer hitches. It is # 38208. Since the Super Titan hitches are not designed for specific vehicles, you will want to look at the instructions and compare them to your vehicle frame to determine if it will fit. It may require additional customization by a professional hitch installer.
  view full answer...
• Dimensions of Heavy-Duty Truck Trailer Hitch Rated for 20,000 Pounds for 1980 Ford F-700
  For a hitch that will tow 20,000 pounds or more on your 1980 Ford F-700 you're looking at three options. All three have a 3 inch reciver opening and include a ball mount with both a 2 inch and 2-5/16 inch hitch ball, pin, and clip. They also are all weld-on hitches and not bolt on. Draw-Tite Super Titan 3000 # 38023 has a maximum towing capacity of 20,000 pounds. It will fit frame widths from 33-1/2 to 34-1/2 inches and from the bottom of the frame to the top of the receiver tube...
  view full answer...
• Can the Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver Be Bolted
  The Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receivers like part # 38023 all require welding. They are universal hitches which require fabrication and modification for installation. In order to achieve the full capacity of the hitch, there will need to be welds throughout for support.
  view full answer...
• Recommended Solution for Using 3" Receiver Accessory on 2-1/2" Receiver of 2020 GMC Sierra 3500
  I may have a solution for you, but there is not an adapter available to make a 2-1/2" receiver into a 3" receiver. The only way to get a 3" hitch receiver would be to move to a hitch like the Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver - 20K - 12" x 11-1/4" Wings # 38023, which is built for frame widths from 33-1/2" to 34-1/2". You would need to measure the distance between your frame rails on your 2020 GMC Sierra 3500 to determine which Super Titan you would need. If you'd...
  view full answer...
• Hitch Pin for Use in 3-Inch Hitch Receiver on Ford F-250
  We do offer a specialized heavy-duty zinc hitch pin (with grip handle and included clip) for use in 3-inch hitch receivers such as the Super Titan 3000 Weld-on Trailer Hitch with 3-Inch Receiver Opening # 38023. The pin part number is # 58388 and it has an overall length of 6-inches. The linked video illustrates.
  view full answer...
• Reese Super Titan Weld-on Trailer Hitch for 33-1/2 Inch Wide Frame
  I do have a solution for you, but the Super Titan 4000 Weld-on Trailer Hitch part # 38124 is designed for vehicles with 34" to 34-1/2" wide frames. Instead, you'll need to use the Super Titan 3000 Weld-on Trailer Hitch with 3" Receiver Opening, 20,000 lbs. Item # 38023. It fits 34-1/2" frames right out of the box, so to fit your 33-1/2" frame, you will just need to remove a total of four spacer plates (two on each side), as explained on step 1 of the attached installation instructions. ...
  view full answer...
  
• Class 5 Trailer Hitch Receiver for Frame Measurement of 33-1/2 Inches
  There are a number of options for Class V trailer hitch receivers that are weld-on options and fit a frame width of 33-1/2 inches, it just depends on what is best for your application in terms of drop (there isn't anything custom fit for your Isuzu, hence a weld-on hitch being the only option). - Curt Class 5 Universal Weld-on Hitch with Brackets # C99CR This hitch will fit that frame distance and produces a drop of 18 inches from the frame of your Isuzu. - Curt Class 5 Universal...
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?