An economical gooseneck plate designed for use with above-the-bed fifth wheel rails. The plate has a 2-5/16" hitch ball, set into the holes on the fifth wheel rails, and is held in place with pins and clips. Call 800-298-8924 to order Pro Series Gooseneck part number 49080 or order online at Free expert support on all Pro Series products. Guaranteed Lowest Price and Fastest Shipping for Pro Series 25K Gooseneck Plate for Fifth Wheel Rails by Draw-Tite, Hidden Hitch and Reese. Gooseneck reviews from real customers.
Select Your Vehicle

View Cart

Gooseneck > Gooseneck for Fifth Wheel Rails > Fixed Ball > Fixed Ball - Offset > 2-5/16 Hitch Ball > 6250 lbs TW > 25000 lbs GTW > Pro Series

Pro Series 25K Gooseneck Plate for Fifth Wheel Rails by Draw-Tite, Hidden Hitch and Reese

Pro Series Gooseneck

(78 reviews)

Code:   49080



Shipping Special

Shipping Weight: 34.62 pounds


Pro Series Gooseneck - 49080

An economical gooseneck plate designed for use with above-the-bed fifth wheel rails. The plate has a 2-5/16" hitch ball, set into the holes on the fifth wheel rails, and is held in place with pins and clips.


  • 25,000 lb GTW capacity / 6,250 lbs TW
  • Offset ball allows you to move trailer closer or farther away from cab of truck
    • Great for short bed trucks
  • Easily mounts to above-the-bed fifth wheel rails (sold separately)
    • Fits Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky brand rails
    • Easy installation and removal
    • Allows full access to truck bed when removed
  • Durable, powder coat, black paint finish
  • 2-5/16" Heat-treated ball
  • 4 Safety chain locations allow for easy trailer connection
    • Note: some states require safety chains to be attached to a separate connection point than to the hitch
  • 5 Year limited warranty


  • Center of the ball is 10-1/2" from one end of the plate and 14-1/2" from the other
  • Curve in plate provides a 2" rise

Mounting Tab Measurements:

  • Tab measures 15/32" x 1-1/2"
  • Distance on center between the tabs, left to right: 10"
  • Distance between the tabs front to back (opposite rails): 21-15/32"
  • Distance from outside to outside of the tabs front to back (opposite rails): 22-13/32"

49080 Pro Series Gooseneck Hitch for Fifth Wheel Rails

Video of Pro Series 25K Gooseneck Plate for Fifth Wheel Rails by Draw-Tite, Hidden Hitch and Reese

Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.

Video Transcript for Pro Series Gooseneck 49080 Review

Customer Reviews

Pro Series 25K Gooseneck Plate for Fifth Wheel Rails by Draw-Tite, Hidden Hitch and Reese - 49080

Average Customer Rating:  4.7 out of 5 stars   (78 Customer Reviews)

An economical gooseneck plate designed for use with above-the-bed fifth wheel rails. The plate has a 2-5/16" hitch ball, set into the holes on the fifth wheel rails, and is held in place with pins and clips.

- 49080

by: Stephen C.06/07/2013

I've got a short bed so the ball swung to one end helps just that little extra. Fit great, easy installation. Customer service made the difference for me though. These products are all going to work, no matter who you get them from. Customer service helped me pick the least expensive shipping to get it to my house on time (and it made it just on time). 83680


I was worried at first that the hitch wouldnt come out easily, but it can be switched out very very quickly. After a year Im still quite happy and would recommend this to anyone interested. Thanks again!

Stephen C - 12/06/2014


- 49080

by: Charles B11/09/2012

The specs were not quite right to fit the rails I have in place for my Trail Boss 5th wheel hitch. So I had to make some adjustments. The design itself is superior. It is just that fit to my system that is an issue. 59064


We have continued to use the hitch without a problem. I am able to use either the gooseneck hitch, which I leave in place all the time, or mount the 5th-wheel hitch over it to use with my camper.It is a most reasonable system.

Charles B - 05/10/2014


- 49080

by: Doyle W.05/31/2013

I am very happy with this product. The price was good, it arrived a day early and it fit perfectly on my existing 5th wheel rails. It took about 2 minutes to set in place, install the locking pins and I was ready to go. I am a repeat customer and highly recommend etrailer. 82750


I am still very happy with this product. Still working properly!! Expect to use it for a long time.

Doyle W - 05/31/2014


- 49080

by: Lara K06/11/2015

I wish I had pictures but I know that there is one that is already posted on here that speaks a 1000 words when I came looking for this hitch. It fit beautifully in the rails I had installed for a 5th-wheel hitch and was almost as easy to install as described. My rails were installed for the 5th wheel that has a bit more wiggle room for fitting. This hitch doesn't, so we had to lossen up one rail so that we could get it to slip in as it should and tightened it all back down. Used it to pull a fully loaded 4 horse trailer a couple of weekend ago and it worked beautifully. I would recommend to a friend, I would buy it again if I needed it and I think it was a great value for the price... :) 202472

- 49080

by: Cam C09/19/2014

I received the package very quickly, it took me a little persuading with a 4lb to get it lined up but my rails have been installed for a very long time, other than a little tapping it fit great. The only reason the rating is not the top is the paint. it was flaking off right out of the box and has a slight amount of rust, it will not hurt the performance and I am certain I will scratch it up quite a bit more. It is very sturdy and I am sure I will get years of use out of it. In the future if I need anything else for a trailer, this will be my first source. 152191

- 49080

by: Richard L02/21/2013

The product was exactly as described and shipped. Fits my Reese rails like it was a package deal. I have installed the Gooseneck plate but I have not had the chance to use it due to the ice storm currently in progress. I can't wait for the weather to clear and the unit to be put into use. Great company...great price...great doing business with eTrailer!! 67201


My Gooseneck plate works perfect and fits my existing rails like a glove. I now carry both my Gooseneck and Reese 5th wheel mounts and swap them out in minutes.

comment by: Richard S - 02/21/2014


Thanks for coming back to follow up with us. We are glad to know the plate is still working hard.

Patrick B - 2/21/2014

- 49080

by: Charles H08/31/2014

I have rails and a fifth wheel hitch that I use regularly. I wanted to be able to tow a gooseneck trailer on occasion. This appears to be an excellent solution. It was easy to find online, ordering was easy, it came quickly, and fits nicely. I had read that a couple people had to file a bit to get it to fit and I thought I might have to do that as my rails were about 21 7/8 inches apart. There was enough tolerance that it fit in right out of the box. I'm very happy with the product and the service. 149349

- 49080

by: Dutch01/22/2015

The hitch looks well made and solid. For some reason it would only fit one way in my rails. If the ball was turned closer to the tailgate, the rear hole on the passenger side of the bed wouldn't line up. The pin would go through the front hole on the rail and into the tab on the hitch, but was half a hole off on the back side of the rail. When I turned the ball closer to the front of the bed all four holes would line up. Doesn't make sense but I could not get the hole to line up for anything. 170765

- 49080

by: Mike C.04/30/2012

Your product worked perfectly, fit into my existing rails with no problems. Delivery was fast. 38827

- 49080

by: Kent H09/28/2012

This product is a quality piece of equipment that was delivered on time at a reasonable price. I would not hesitate to purchase more products from in the future. This plate dropped right in place on the previously installed rails (this truck also tows a fifth wheel camper) in a matter of 2 minutes. It appears to be of exceptional fit and construction. We will be towing with it tomorrow and the true test will unfold. I have no hesitations at this point. 56011

- 49080

by: Robert S08/28/2013

The service of etrailer was excellent I got the hitch a day earlier than they predicted. The hitch did not fit directly into my bars mounted in my truck. I have a fifth wheel and this hitch was meant to go straight into the Reese bars I had in my truck bed. I had to grind 1/8th of my slots in the bars to make the hitch fit. No big deal (unless you don't have a handy angle grinder) and shouldn't affect the weight bearing. 97294

- 49080

by: don yarbrough03/01/2012

i odered a gooseneck plate for fith wheel rails , when i recieved the item i was suprised by the quality of the gooseneck, i shopped around alot and most places was 325.00, etrailer was half the cost and and shipping was free, they even upgraded to a faster delivery at no cost, ordering , finding the product was very easy , i could have saved alot of time if i would have went to etraler first. thanks don y 32832

- 49080

by: Kevin M02/14/2014

Thank you for the follow up to my purchase. This was the second time I have made a purchase from your business and just like the first time, I was extremely happy with your product and the way your business conducts its self. The goose neck plate fit directly into my Reese rails without any problem. Installation took all of 2 minutes. I would recommend your business and/or products to anyone. 116508

- 49080

by: Terry H09/18/2015

It went right in like it belonged there. My husband & I installed the hitch in 10 tools except for a hammer to "convince" it into place. I installed this in a 2001 F-250. Planning a test run later today...I will update if I discover any major flaws. But I do not expect any trouble. Great service and my compliments to "George J"!!!! 226200

- 49080

by: vernon10/15/2014

Had to do a lot of grinding on this to make it fit my Reese rails. I have a Reese 5th wheel hitch that fits the rails ok. When I first looked at my pickup it had a Reese gooseneck hitch in it. The person I bought the pickup from kept it so I know that the rails were ok. The jig they use to build these must be off some. 156039

- 49080

by: Mike S04/13/2015

The product was exactly what I ordered. It takes a little bit more effort than the video to get all the pins in as there is no room for adjustments. But I figured out if I install the pins in cross cross pattern instead of doing one whole side that I could get all the pins in. Once all the pins are in there is no movement. 184970

- 49080

by: bryce C04/23/2012

got my hitch put in my truck an pulled with it the next day works great if i knew how to put pictures on the computer i would send some but i barley know how to turn it on it was nice been able to talk to some one on the phone usualy all you get is a recording or talkin to a automated person thanks for the help 38158

- 49080

by: Eric02/08/2013

I had to monkey with it at first to get it set in but that was completely because of the way my rails were installed and had nothing to do with the product. so far it is meeting all my expectations. The customer service here has been top notch. they will have my business from here out as long as that remains the same 65507

- 49080

by: danny s02/25/2011

Just what I needed to pull my gooseneck trailer. I purchesed a draw-tite fifth wheel hitch from e-trailer a few years ago, and it made it an easy choice. It will fit right into the rails with 4 pins; and as always with e-trailer the service was excellent. Highly reccomend the product, and e-trailer. 7912

- 49080

by: Warren Pugh09/20/2011

I had to file the holes a bit for the pins to line up but looks like it will work fine. 24273


We have a 2004 Dodge Ram 3500 longbed pickup truck. Would this offset ball hitch work on our truck or should we get a center mount ball hitch? The rails are already in the truck and are set center of the axle.

comment by: Becky C - 02/09/2013


The ball being a little ahead of the axle would be fine as well. This could be dependent on the shape of the trailer frame too. If you do want a centered ball option, check RP58079 or Curt 16085.

Patrick B - 2/15/2013

- 49080

by: Rodney C.09/13/2012

Very easy to put in bed, I would advise on getting a locking pin for it though. 54640

- 49080

by: Anthony09/03/2015

Excellent product fast shipping always a pleasure working with etrailer 223936

- 49080

by: Jason H.09/03/2014

Pro Series 25K Gooseneck Plate is a great product, because you can switch between 5th wheel and gooseneck ball easy with your truck rails; without sending alot money to switch out for your trailer, or camper. I look forward to buying more from for my trucks. 149920

- 49080

by: Steve Hasenfratz08/05/2014

I ordered the gooseneck plate with the ball and it arrived at my doorstep in just 2 days! Amazing! Fits perfectly. Second time I have ordered from etrailer and both things have gotten here quickly and the quality has been excellent. Highly recommend these guys! 144605

- 49080

by: Nick11/19/2013

Fit perfect, looks great, built solid, fast shipping!! 107789

- 49080

by: Mike Z11/19/2014

Great product at the best price I could find on line! Now I have both hitch set ups to use on my bed rails. Fit was no problem and comes with the four pins/clips and extra bolts if you don't already have them installed on your bed rails. 161821

- 49080

by: Dennis N.06/15/2012

I had never used a goose neck hitch before, I found it easy to set up and was very pleased with the pull. I am physically challenged and have little difficulty setting it up and taking it down. I would recommend it to anyone in the market. 44301

- 49080

by: Jake W.10/12/2012

The costumer service for ordering this was top notch! Mark helped me make sure the order was proccesed that night at 8pm and on UPS by 5am that next morning. The hitch was delivered in 2 days by 9am and it fit perfect. Thanks! 57069

- 49080

by: Jan P.06/07/2015

Our hitch arrived on time & was simple to install. This gives us future flexibility. We will now be able to haul a 5th wheeler or a goose neck trailer. Thanks for your excellent service! Jan P. Reddick, FL 201303

- 49080

by: Mikie T10/09/2014

Superb Quality all around from plate to pins, etc, I haven't used it yet but will hook up to my fifth wheel rails soon enough and see how she does! Thanks etrailer for getting it to me in a timely manner! 155433

- 49080

by: Bruce P.06/10/2013

Thanks again , the gooseneck attachment to the fifth wheel track easily fit right in the track . A special thanks to Alicia G who took my order and was an absolute pleasure to speak with . Bruce 83974

- 49080

by: Nick09/26/2008

Made in USA, un-real price! This plate cost less than half what others want. Nice large chain holes on both ends of plate. Offset ball is perfect for short-bed trucks. Best bang for your buck! 1315

- 49080

by: Don W09/16/2014

Did not fit fifth wheel rails! I did not have time to send back so I had to modit system! Some grinding and hammering and now fits! The plate pegs were off by a quarter of an inch 151459

- 49080

by: Greg07/10/2015

This item was as advertised and the quality was good. It took a little adjustment to fit in my rails. I was able to make the adjustments in about 15 minutes, now it's good to go. 210735

- 49080

by: Dennis R.10/06/2014

The ball plate is well formed and sturdy. It fits well in my Reese bedrails and I can leave it mounted under the 5th wheel hitch. It was exactly what I was looking for. 154810

- 49080

by: Dave B.06/11/2014

I am very pleased with this goose neck hitch adapter plate. It fit perfectly into the rails for my 5th wheel hitch and installation and removal is less than 3 minutes. 135037

- 49080

by: bama05/06/2010

front to back demenions short Increase demensions from 21 15/32 to 21 17/32 inches from front rail to back rail, maybe my rails were installed short. 3009

- 49080

by: Mary M09/08/2014

product was a perfect fit , easy instalation very well made. will definitely refer your company and order future products from your company. 150366

- 49080

by: Tanna R.10/02/2014

Product was just as described, and the e-trailer customer service was extremely quick and helpful when I contacted them. Thanks Tommy C.!! 154064

- 49080

by: scott01/06/2015

Thank yo for your prompt, professional service The adapter plate we ordered yesterday arrived today and is already in use Thank you 167912

- 49080

by: Ed Champlin06/13/2015

Great service. Really nice product. Required small adjustment with my 2lb. tweaker. Overall I could not be happier. Thanks. edc 203111

- 49080

by: Ben08/08/2012

Thank you for the wonderful service you offer. My hitch was shipped fast and fit perfect. I will be buying more through etrailer. 51006

- 49080

by: Dennis01/09/2012

The 25k Gooseneck plate works great,it fit right into my reese 5th wheel rails an my with no problems. excellent product!! 29382

- 49080

by: Aaron B05/02/2013

Good price, nice heavy duty hitch plate and I like the ball offset of 4.5 inches. Thanks for the quick shipping too. 78728

- 49080

by: Kevin m06/25/2015

Looks great was delivered fast but had to take a little powder coat off tabs so it would slide in the mount easier. 207169

- 49080

by: Janet04/20/2013

I was very satify with the product, and the person who answer all my questions. I will order from you again. 77020

- 49080

by: Gary04/30/2015

Very good transaction excellent service will recommend etrailer to anyone in the need of of trailer parts. 188900

- 49080

by: Quality First Contracting03/27/2015

As always etrailer delivers great products at good prices and get them to me quickly! Love 181125

- 49080

by: Randy02/13/2013

Good solid piece of steel. Haven't used it yet, but it looks plenty tough to handle my trailer. 66213

- 49080

by: Chad James01/30/2014

excellent customer service. quick shipping. product exactly what i expected, excellent price. 115260

Show More Reviews

Ask the Experts about this Pro Series Gooseneck
Do you have a question about this Gooseneck?

  • Options for Towing 5th Wheel and Gooseneck Trailers with the Same Truck
  • The best way to proceed will depend on if there is already a fifth wheel or gooseneck hitch installed on your truck. If you already have a gooseneck hitch installed, we offer several different adapters that will allow you to tow a fifth wheel using a gooseneck ball. The Rapid Hitch Ranch Hitch adapter, part # AM3100 is one of our best sellers, but keep in mind that using the adapters can void some fifth wheel warranties because of the extra stress they can place on the frame of the fifth...
    view full answer...

  • Using Fifth Wheel to Gooseneck Adapter on Receiver Hitch
  • The Convert-A-Ball Cushioned 5th Wheel to Gooseneck Adapter you mentioned, part # CAB-C5G is meant to convert a truck bed mounted gooseneck hitch for use with a fifth wheel trailer. It cannot be used with a trailer ball mounted to a draw bar installed into a rear mounted receiver hitch. Your best bet would be to install a fifth wheel hitch in your truck bed. You would want to choose a fifth wheel hitch whose weight capacity exceeds the fully loaded and ready to tow weight of your fifth...
    view full answer...

  • Can I Haul Fifth-Wheel or Gooseneck Trailer With 2010 GMC Sierra 1500 5.5 Ft. Short Bed 2WD Crew Cab
  • For a fifth wheel hitch, we do have applications for the 5.5 ft. bed of the 2010 GMC Sierra 1500, but use of a Sidewinder King Pin is required for clearance. A Sidewinder King Pin will move the pivot point of the trailer back 22 Inches which will give you additional clearance needed to make turns (see Sidewinder FAQ). Before buying a fifth wheel trailer, I would recommend using our Pin Box Conversion chart that shows all the fifth-wheel pin boxes that are compatible with Sidewinder King...
    view full answer...

  • Will the Pro Series 25K Gooseneck Plate Fit on RBW 5th Wheel Rails
  • The Pro Series 25K Gooseneck Plate, # 49080, that you referenced will fit on your RBW rails as long as they are the industry standard rails. If they are custom RBW rails, then it will not fit. I spoke with my contact for Pro Series and they do not test their gooseneck plates on RBW rails, so the fit is not guaranteed. I pulled the item from our warehouse and took some measurements for you. The distance between the tabs front to back is 22 inches from center to center. The distance between...
    view full answer...

  • Comparing the Curt Spyder and Pro Series Gooseneck Trailer Hitches for 5th Wheel Rails
  • First, I have included a link to all of the gooseneck hitches we carry that fit in 5th wheel rails. The Curt Spyder, # 16085, has a low profile design and it is heavier than the Pro Series plate style hitch # 49080. Besides that, there really are not a lot of differences. The big advantage that the Pro Series hitch has is that it can be oriented so that the ball is closer to the back of the truck for more clearance when towing with a short bed truck. For me, I like the Pro Series...
    view full answer...

  • Compatability of a Goose Neck Plate with Reese Universal Mounting Kit and Rails
  • We have four available options for a Gooseneck Plate that will fit the standard Reese above the bed fifth wheel rails. Pro Series 25K Gooseneck Plate # 49080 Draw-Tite 25K Gooseneck Trailer Hitch # 6002 Curt Spyder 25K Gooseneck Trailer Hitch for Fifth Wheel Rails # 16085 Reese Above-Bed 25K Gooseneck Hitch, part # RP58079 Any of these gooseneck plates will fit in the rails supplied with the Reese Pro Series 15K fifth-wheel hitch, part # PS30128.
    view full answer...

  • 5th Wheel And Gooseneck Adapter Recommendations For 2014 Dodge 3500 Dually With Tow Package
  • I spoke with my contact at Reese and they told me that 2014 Dodge Ram 3500 trucks with the towing package installed would require the Reese 5th Wheel Rail Adapter, part # RP30154. This above bed system attaches to the underbed towing package. It attaches to the sockets in the factory package and furnishes above bed rails for your standard 5th-wheel hitch. They told me there is no adapter available that would eliminate the need for above bed rails when the towing package is installed. This...
    view full answer...

  • What is the Maximum Distance Required Between the Truck Bed and 5th Wheel Trailer When Towing
  • The recommended clearance from the rear corner of your truck bed to your fifth wheel trailer when in a turn is 4 inches. If you have a 9ft or 10ft long flat bed, then you may not have the full 4 inches that is recommended. If you already have a fifth wheel hitch or gooseneck hitch installed on your truck, then you will want to measure from the center of the fifth wheel hitch jaw or the center of the hitch ball in the gooseneck hitch to the rear corner of your truck bed. Next, measure...
    view full answer...

  • Recommendation for a Gooseneck Trailer Hitch that Fits in 5th Wheel Rails
  • I would use a Gooseneck hitch that installs in the rails that the fifth-wheel sets in. We have several models and they all fit in the standard fifth-wheel rails. Draw-Tite 25K Gooseneck Trailer Hitch, item # 6002 Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW, item # 16085 Pro Series 25K Gooseneck Plate for Fifth Wheel Rails, item # 49080 If you do not want to remove the fifth-wheel hitch to hook up to the gooseneck trailer I would recommend using the...
    view full answer...

  • Fit of Reese # RP58079 Above-Bed Gooseneck Hitch in Bed-Mounted DSP Fifth Wheel Rails
  • The gooseneck hitches we offer that pin into the bed mounted fifth wheel rails are compatible with industry standard fifth wheel rails. The Reese Above -Bed Goosneck Hitch you referred to, part # RP58079 will fit bed rails that have slots that measure 22 inches apart center to center measured front-to-back and 10 inches apart center to center side-to-side. The Husky # HT31368 or the Pro Series # 49080 have the same tab dimensions. I did some research, and found that DSP has used two...
    view full answer...

  • How to Select the Correct 5th Wheel Trailer to Gooseneck Adapter for a 2011 3500 Chevrolet Silverado
  • I would recommend installing a fifth-wheel trailer hitch and custom install kit in your 2011 3500 Silverado with 6 foot bed for the best towing performance and ride with a fifth-wheel trailer. The parts needed for this installation would be the custom install kit, # RP50066-58, and a fifth-wheel hitch with slider, # RP30083. The slider unit will provide 12 inches of clearance when maneuvering the trailer in tight situations with your short bed truck. If your occupation, or some other...
    view full answer...

  • Gooseneck Attachment to 5th Wheel Rails in a 2009 Dodge Ram 2500
  • Yes, we have 3 different gooseneck hitches that mount in the standard Reese fifth-wheel rails. I have listed these items below. Draw-Tite 25K Gooseneck Trailer Hitch, Item # 6002 Pro Series 25K Gooseneck Plate for Fifth Wheel Rails, Item # 49080 Curt Spyder Gooseneck Trailer Hitch, Item # 16085
    view full answer...

  • Adapter to Tow Fifth Wheel with Curt Quick Goose # C60630
  • We offer several different adapters that would allow you to pull a fifth wheel trailer with a truck that is equipped with a gooseneck hitch. As I do not have any information about your truck, I will run through the various alternatives that might work for you. If you have not already installed the gooseneck hitch, you will be better off using a fifth wheel hitch installed on rails in your truck bed, and using a gooseneck adapter like part # 49080 that would install on the fifth wheel...
    view full answer...

  • Recommendation of Gooseneck Adapter Plates or a Gooseneck Hitch for a 2006 GMC Sierra Pickup
  • If you already have the fifth-wheel rails installed in the bed of your truck then I would go with a Gooseneck Plate so that you do not have to install a new under bed mount system and make new holes in the truck bed. Cost will be less if you use a gooseneck plate also, plus there is the added advantage that if you want to tow a fifth-wheel trailer you will be able to use a fifth-wheel hitch without a gooseneck adapter. A gooseneck to fifth-wheel trailer adapter would be another expense...
    view full answer...

  • Gooseneck Trailer Hitch for a 2012 Ford F-150 with 5-1/2 Foot Bed
  • I spoke with my contact at Blue Ox and she stated that you will measure from the rear edge of the bed, not the tailgate, forward 45 inches. This is where the center of the ball hole would be. If you do this and it is not centered over the rear axle then the hitch will not fit. Currently we only have fits for the 6-1/2 foot bed models. My Blue Ox contact stated that you would need to measure on the 5-1/2 foot bed. The other gooseneck hitches we carry are not listed as a fit for a 5-1/2...
    view full answer...

  • Fifth Wheel King Pin to Gooseneck Hitch Adapter for 2011 Chevy Silverado 3500
  • When you get right down to it, if you are going to primarily tow a fifth wheel trailer and you have not installed a gooseneck yet, the best practice really is to use a sliding fifth wheel hitch. Reese offers a nice option, their Elite Series, part # RP30144 that would allow you to install a fifth wheel hitch using rails, part # RP30868 that mount under the truck bed. Four small flush-mounted pucks remain in the bed once the hitch is removed, allowing full bed access. Even a standard...
    view full answer...

  • Will Draw-Tite Gooseneck Plate, # 49080, Fit On Reese Rails, # RP30035, And What Is Rating On Rails
  • The Draw-Tite Gooseneck Plate, # 49080, will fit on the Reese Universal Base Rails and Installation Kit, # RP30035. The gooseneck plate is rated for 25,000 lbs. The universal rails will be able to handle the 25,000 lbs. weight rating because the rails are designed to exceed the towing weight capacity of the vehicle it will fit. The gooseneck plate and the universal rails will both exceed the towing capacity of your 1997 Chevy Cheyenne truck. So the weight rating limit will be determined...
    view full answer...

  • How Can I Pull a Gooseneck Trailer with My 5th Wheel Hitch in My 2005 Ford F-150
  • Yes, we have both a product that will accomplish what you are looking to do and a video that features the product being installed into a truck. You could use a Gooseneck to Fifth Wheel Trailer Adapter - Square, part # KP84HB, like you referenced. This would allow you to tow your gooseneck trailer with your fifth wheel hitch. Another option is to get a Pro Series 25K Gooseneck Plate for Fifth Wheel Rails by Draw-Tite, part # 49080. This product will install onto the rails of your fifth...
    view full answer...

  • What are the Two Additional Carriage Bolts Used For with the Pro Series Gooseneck Plate
  • The carriage bolts, washers and spacer blocks that are included with the Pro Series 25K Gooseneck Plate, # 49080, only need to be used if you have a 4-bolt base rails installed on your truck. You can tell if you have a 4-bolt kit if you only have two carriage bolts holding each base rail to the frame brackets . I have attached a photo showing the difference between 4-bolt rails and 10-bolt rails. The two additional bolts will need to be installed in the center holes on the base rails...
    view full answer...

  • Offset Needed to Provide Clearance When Towing a 5th Wheel Trailer with a 2006 3500 Dodge Mega Cab
  • The Curt X5 Fifth Wheel Adapter for B and W Square Shank Turnover Ball Hitches, item # 16310 is not available in an offset configuration. You have two options for converting your B and W gooseneck hitch to tow a fifth-wheel trailer. The first option is to use a fifth wheel to gooseneck adapter like the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter w/8" Offset for Short-Bed Trucks, item # AM3139. The Ranch hitch is height adjustable and provides 8 extra inches of offset...
    view full answer...

  • Will Curt Spyder Gooseneck Trailer Hitch, # 16085, Fit in Reese 5th WHeel Trailer Hitch Rails
  • The Curt Spyder Gooseneck Trailer Hitch, # 16085, is compatible with the Reese 5th wheel rails you have. I have included a link to the installation details for this hitch for you to view. We do have several options for gooseneck trailer hitches that fit in 5th wheel rails. The most economical is Pro Series 25K Gooseneck Plate, # 49080. The benefit of this hitch is that it can be mounted with the ball closer to the rear of the truck to provide an offset if you have a short bed truck....
    view full answer...

  • Does the Wallace Forge Gooseneck to Fifth Wheel Trailer Adapter # 2085205 Have Holes for a Pin
  • The Wallace Forge Gooseneck to Fifth Wheel Trailer Adapter, part # 2085205, does not use any holes. It is designed to be used with the set screws that are on the gooseneck trailer. The adapter does not need any holes when using set screws. The set screws are made to tighten against the tube to hold it in place. When a gooseneck to fifth wheel adapter has holes in it it will use a load bearing pin that will slide through the hole on the gooseneck trailer and the adapter. It will still...
    view full answer...

  • Gooseneck Trailer Hitch Plate to Fit in Place of RBW Lil Rocker 5th Wheel Hitch on a 2003 Silverado
  • I do know that the RBW Lil' Rocker 5th wheel hitch will fit in the standard above the bed rails that we carry. What I am not sure of is if the gooseneck plates we have that fit the above the bed rails will fit the RBW rails (if they are RBW rails). You will need to take some measurements of the rails to determine fit. I have included a picture showing the rail measurements our gooseneck plates will fit in. The plates will use the inner most set of mounting tabs on the rails, about 10...
    view full answer...

  • Will the Pro Series 25k Gooseneck Plate Fit in Quality S 5th Wheel Rails
  • I believe you are referring to the CURT Universal Fifth Wheel Base Rails, # C16204, when you mention the Quality S rails. If this is the case then, yes, the Pro Series 25K Gooseneck Plate, # 49080, will fit, When installing the gooseneck plate, you may need to have your fifth-wheel hitch and the gooseneck plate handy. You may need to loosen the rails and then install both hitches, finding a position that will easily accept both parts, and then tighten the rails back down. If the Quality...
    view full answer...

  • Is the Ball on Draw-Tite 25K Gooseneck Trailer Hitch Offset
  • The ball on the Draw-Tite 25K Gooseneck Trailer Hitch for Fifth Wheel Rails, part # 6002, is centered front to back and side to side. Whether or not the ball sits centered over the axle will depend on the rails in your truck bed. It will fit Valley rails. In order to find out whether or not it will fit Husky rails, you will need to measure. The Tab measurements for the hitch are at the bottom of the product page. The pins used to attach this hitch to the fifth wheel rails are the same...
    view full answer...

  • What 5th Wheel Trailer Hitch Installation Kit Fits a 2005 Ford F-250 King Ranch 4 Door Diesel
  • As long as your 2005 Ford F-250 has at least a 6-1/2 foot short bed there are options. But if you have a Super Crew with a bed less than 6 feet long, there can be some clearance issues. Given the shape of a most gooseneck trailers, the clearance problem may not be as bad between the cab of the truck and the front of the trailer as it would be with a 5th wheel. You would probably need to remove the tail gate when you tow the gooseneck on a bed shorter than 6 feet. The Reese Quick-Install...
    view full answer...

  • Towing Fifth Wheels and Gooseneck Trailers with Ford F250 with 6 Foot 8 Inch Bed
  • Good truck choice! A 6-3/4 foot bed should work just fine for a gooseneck, but for a fifth wheel, you won't have enough clearance between the trailer loft and the rear of the cab. During turns, you could possibly have the trailer corner collide with the rear of the cab. Which would be bad. Since you don't have the truck yet, I'd go with an 8 foot bed so you can avoid clearance issues all together. There are two ways you can gain enough clearance. First, you can use a sliding fifth wheel...
    view full answer...

  • Available Adapter To Attach A 5th-Wheel Trailer To Reese Fold Down Gooseneck Hitch
  • If you do not have the gooseneck installed yet the most recommended setup you can use is to have a 5th-wheel system installed first and then when you wish to tow a gooseneck trailer, you would remove the 5th-wheel hitch and use an adapter plate, like the Pro Series 25K Gooseneck Plate for Fifth Wheel Rails, part # 49080, with a gooseneck ball attached for towing. If you already have a gooseneck or wish to have a gooseneck hitch installed and use an adapter to convert it to a fifth...
    view full answer...

  • Will the Draw Tite 6002 fit in the Rails for the DrawTite 5th Wheel Trailer Hitch
  • The Draw-Tite 25K Gooseneck Trailer Hitch, item # 6002, will install in the rails that your fifth-wheel hitch sets in. If you need the gooseneck to be set further back in the hitch, for turning clearance, you could use the Pro Series 25K Gooseneck Plate for Fifth Wheel Rails, item # 49080, which is offset toward the rear rail in the bed of your pickup. The center of the ball is 10-1/2 inches from one end of the plate and 14-1/2 inches from the other end. There is not a sliding gooseneck...
    view full answer...

Do you have a question about this Gooseneck?

Info for this part was:

Photos by:
Theodore B

Expert Research:
Michael L

Video Edited:
Zack K

Expert Research:
Robert G

Expert Research:
Patrick B

Expert Research:
Michael H

Expert Research:
Jeff D

Expert Research:
Jameson C

Expert Research:
John H

Updated by:
Laura H

Expert Research:
Jeffrey L

Photos by:
Zach O

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Stay Connected

Subscribe to email newsletter


privacy - we don't send unsolicited email reviews

All images, layout and content copyright