View Cart
Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit - 30,000 lbs

Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit - 30,000 lbs

Item # 9465-54

lowest price pledge

Retail:$613.68

Our Price: $398.35

You Save: $215.33
Gooseneck

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 94 lbs

Quantity: 
In Stock, Ships Today
Gooseneck 9465-54 - 2-5/16 Hitch Ball - Draw-Tite
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Draw-Tite
  • Below the Bed
  • Removable Ball - Stores in Hitch
  • 2-5/16 Hitch Ball
  • Wheel Well Release
  • 7500 lbs TW
  • 30000 lbs GTW
  • Manual Ball Removal
Remove the ball on this gooseneck hitch and store it upside down inside of the hitch to get full use of your truck bed when you're not towing. Wheel-well-accessible handle makes it easy to engage and disengage. Custom installation kit included. Call 800-298-8924 to order Draw-Tite gooseneck part number 9465-54 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit - 30,000 lbs. Gooseneck reviews from real customers.


  • All Info
  • Reviews (239)
  • Q & A (27)
  • Videos (4)
  • Photos
  • Why etrailer?

Draw-Tite Gooseneck - 9465-54

Remove the ball on this gooseneck hitch and store it upside down inside of the hitch to get full use of your truck bed when you're not towing. Wheel-well-accessible handle makes it easy to engage and disengage. Custom installation kit included.


Features:

  • Heavy-duty underbed hitch lets you tow your gooseneck trailer
  • Complete truck bed access when you're not towing
    • Remove ball from hitch, flip it upside down, and drop it back into hitch for storage
  • Locking pin on end of handle goes all the way through ball shank to secure it in place
    • Conveniently access handle at rear driver's-side wheel well
  • Round sleeve and round shank on hitch ball provide a tighter fit than square design
    • Reduces rattle and boosts durability
  • Spring-loaded safety-chain hookups are built in
  • Magnetic cover protects ball hole from dirt and grime
  • Chrome-plated hitch ball resists rust
  • Black powder coated steel resists corrosion
  • Tested to VESC-19 specifications
  • Simple installation with included custom mounting kit
    • No drilling, welding, or bed removal required
    • 3-1/2" Diameter ball hole and (4) 9/16" diameter U-bolt holes must be cut into bed


Specs:

  • Gross towing weight:
    • Hitch head is rated for 30,000 lbs
    • Installation rails are rated for 16,000 lbs
  • Vertical load limit:
    • Hitch head is rated for 7,500 lbs
    • Installation rails are rated for 4,000 lbs
  • Ball size: 2-5/16"
  • Limited lifetime warranty


Ball Displayed

The Hide-A-Goose gooseneck trailer hitch works to meet your heavy-duty towing needs while still allowing you to get full use out of your truck bed. The hitch installs beneath your vehicle to create a low-profile look. Even the safety-chain holders sit flush against your truck bed to take up as little room as possible. The ball easily secures in the hitch with a reinforced locking pin that is operated by a handle that installs in your truck's rear wheel well.


Handle and Storage

This hitch is called the Hide-A-Goose because of its convenient ability to hide the ball when you're not towing. To remove the ball, just pull the handle in the wheel well until it latches in the open position. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then pull the handle again to release it from the open position and reengage the locking pin to secure the ball in the stowed position.


Magent Cover

Once you secure the ball in the stowed position inside the hitch, use the magnetic cover to conceal the ball hole. This cover prevents dirt and debris from getting into the ball hole. This will prevent buildup that could cause the ball to seize up in the hitch.



9465 Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch Head

4454 Hide-A-Goose Trailer Hitch Installation Rail Kit



9465-54 Installation InstructionsInstallation Details 9465-54 Installation instructions9465-54 Installation InstructionsAlternate Instructions 9465-54 Installation instructions

This Product Fits The Following Vehicles

2008 - 2013 GMC Sierra 1500 - 5-1/2 Foot Bed

2007 - 2007 GMC Sierra New Body 1500 - 5-1/2 Foot Bed

2008 - 2013 Chevrolet Silverado 1500 - 5-1/2 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 1500 - 5-1/2 Foot Bed

1999 - 2013 GMC Sierra 1500 - 6-1/2 Foot Bed

2007 - 2007 GMC Sierra New Body 1500 - 6-1/2 Foot Bed

1999 - 2013 Chevrolet Silverado 1500 - 6-1/2 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 1500 - 6-1/2 Foot Bed

1999 - 2013 GMC Sierra 1500 - 8 Foot Bed

2007 - 2007 GMC Sierra New Body 1500 - 8 Foot Bed

1999 - 2013 Chevrolet Silverado 1500 - 8 Foot Bed

2007 - 2007 Chevrolet Silverado New Body 1500 - 8 Foot Bed

2001 - 2006 GMC Sierra 1500 LD - 6-1/2 Foot Bed

2007 - 2007 GMC Sierra Classic 1500 LD - 6-1/2 Foot Bed

2001 - 2006 Chevrolet Silverado 1500 LD - 6-1/2 Foot Bed

2007 - 2007 Chevrolet Silverado Classic 1500 LD - 6-1/2 Foot Bed

2001 - 2006 GMC Sierra 1500 LD - 8 Foot Bed

2007 - 2007 GMC Sierra Classic 1500 LD - 8 Foot Bed

2001 - 2006 Chevrolet Silverado 1500 LD - 8 Foot Bed

2007 - 2007 Chevrolet Silverado Classic 1500 LD - 8 Foot Bed

1999 - 2004 GMC Sierra 2500 LD - 6-1/2 Foot Bed

1999 - 2004 Chevrolet Silverado 2500 LD - 6-1/2 Foot Bed

2014 - 2018 GMC Sierra 1500 5-1/2 Foot Bed

2014 - 2018 Chevrolet Silverado 1500 5-1/2 Foot Bed

2014 - 2018 GMC Sierra 1500 6-1/2 Foot Bed

2019 - 2019 GMC Sierra 1500 Limited 6-1/2 Foot Bed

2014 - 2018 Chevrolet Silverado 1500 6-1/2 Foot Bed

2019 - 2019 Chevrolet Silverado 1500 LD 6-1/2 Foot Bed

2014 - 2018 GMC Sierra 1500 8 Foot Bed

2014 - 2018 Chevrolet Silverado 1500 8 Foot Bed

See All Vehicle Fits

California residents: click here


Video of Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit - 30,000 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Gooseneck Trailer Hitch Installation - 2010 Chevrolet Silverado

Today on our 2010 Chevrolet Silverado, were installing our Hide-A-Goose under-bed gooseneck trailer hitch with installation kit, part number 9465-54. We have our gooseneck in place. The nice thing about it is weve got our spring loaded safety straps here so you can put your chains on that. You have here all locked in place. It also allows for easy storage. Compared to a fifth wheel, you can still use the bed of your truck in this position and you dont really lose any space in your bed. With the fifth wheel, you still have the big massive neck in place where you do lose some of that and even when you take that out, you still have the rail sticking up pretty high.

This does give you more space, more use of your bed. I have your weight limit than your typical hitch on the back of your truck. Well show you how it works. Weve got our lever here. Well pull out towards the wheel and Ill twist it back, lock it in the open position, grab our little loop here, pull our ball out, set it in place. Now, I can come over to our lever here and Ill just flip it down.

It locks itself in place. All right, now to put our ball in the storage position. Ive got our hitch locked open. Ill pull our ball up. Ill flip it over. Now, it goes in one way.

Set it down in there and replace our cover thatll help keep out water, dirt and debris. Keep it smoother actually. Now, I can go lock it in a closed position. Ill just flip it down, it locks itself in place. Now, this is what it looks like after its all installed.

Now, well show you how to install it. All right. Get ready for installation. Weve taken our spare tire down and weve taken off our 2 rear tires. Our next step, were going to come in here. Weve got a bracket up here for our brake lines that well have to loosen up. We got 2 bolts on top and our bolts is 13 millimeter. When you get these out, I like to stick them on the back just so I dont lose them. Heres our bracket, we just loosened up. Well end up moving this when we do our installation. All right, next step, we need to get our exhaust out of the way. I went ahead and sprayed some lube in there just to get loosened up a little bit. Then well try and pry them off. Sometimes it helps to stick a screwdriver through and stretch out the rubber a little bit. It might be a little tough at first. We also got to take this other one off, but before I do that, Im going to get the strap so that this doesnt drop. Were going to go ahead and cut our heat shield and Im going to make a cut behind this cross brace and then Im going to cut across here as well. All right. Ive got 4 bolts holding my bed on the driver side. Im just going to loosen the bolts up. On the passenger side, Im going to take them completely out. For this Im using an 18-millimeter impact socket. According to the instructions, youll get the measurement. This is a short bed although they cut off the front end, it still measures out right. Im using the short bed measurement. It also is going to be a center hole gooseneck hitch so I want to make sure that my hole is centered. All right. Once you have that marked out, youll take a quarter inch drill bit and drill a hole. Assembling this, I want to make sure that our piece is lined up. Were going to have the 90-degree towards the bottom. Were going to have our flat side facing up. Were going to insert 4 bolts and our cool tooth washer and a nut. Ill insert my bolt. I want to put the teeth flat side facing the top of the bolt and then add our nut. Now, once I have all these in place, Im going to go to the instructions for our torque setting. All right. Im using a jack to help me lift up the bed so I can slide our craft piece in here. Im looking at these instructions. It says we need to cut a piece of it here because it drops down here in the center. Im going to take my tin snips. Now, I can try and feed the rest of this over. Now, to make sure, Ive got this pitch in the right spot. Im going to take my outside frame brackets and line them on each side. Then I can check my whole. All right. For test fitting purposes, were going to put an even gap on each side of this and were going to have the big end towards the front. It looks about right. Now, Im going to do the same thing on the other side, to make sure the bracket is lined up. All right. Now that we have everything verified, were going to take our hole saw. Referring to our instructions for the right size and Im going to drill out my hole. Now, we can slide our hitch back in place and make sure its in the right spot. All right. Now, I put my plate in place. Again, the thick side towards the front of the cab. We have 4 black conical tooth washers which well put on. Teeth facing towards the center and then our nuts. Weve got our long bracket here. Were need to grab our long bolt. Its a carriage bolt and all that means is we got the rounded edge with the square fitting, stick that through my home and stick it through this top hole. Ill grab one of the brass colored conical tooth washers which well put on, teeth facing towards the center and then our nuts. Weve got our long bracket here. Well need to grab our long bolt. Its a carriage bolt and all that means is it got the rounded edge with the square fitting, stick that through my home and stick it through this top hole. Ill grab one of the brass colored conical tooth washers, the teeth facing towards the center again and a nut. Now, Ill do the same thing for the bottom side on that. I used my fish wire here. Im to stick this through the frame. Now, that I come through the other side, Im going to take my metal piece here. Stick it on. I can actually feed that into the hole now and then Ill take my bolt and thread it on to our fish wire and feed that in. Were going to take the thicker block here, feed that on to your fish wire and then feed it back through here. Thatll give us the space that we need. All right. Now that weve got the bolt through, Im holding it from the backside. Im going to put a flash washer on and a lock washer. Then I can feed my nut on. Im going to repeat the same process on the other side with all our bolts. Im just snagging these up for now. With these, I want to do the same tightening on top and bottoms. Ive got this flush. I want to get this flush and then Ill switch bolts again to make sure Im tightening it evenly. All right. Now, that Ive got everything snagged up, Im going to go through instructions for the torque settings. Im going to torque these 2 first and then Ill come back and change my torque settings for the other one according to the instructions. All right. Before I torque these 3 bolts, Im going to take our 2 bolts that we took out from our bed frame here. That will wind up our bed with the frame of our truck to make sure everything is lined up tightened down and then we can come back to these bolts. Now, that I have our bed attached again, we can torque this down. All right. Now, Ill repeat the same thing on the other side. All right. Now, Im using these 2 slots. Im going to find where our ribs, these guys are lowest. In my hole, Im going to stick my finger in. I can feel it drop or go up I should say. Here its low and here its high. Im going to use the low side here. Im going to take my half inch drill bit. Im not going to drill through with this, Im just going to mark my hole in both of my slots. Now, Im just going to take an 8-inch drill bit and drill a pilot hole so I can drill down from the top side. The same process I did with these on the passenger side. Im going to repeat over here on the driver side. Now, Ill get on top of the bed and drill down from the top. Now, with this side, I can place my u-bolt in. We have 2 different sizes here. You can see that one side has a shorter stud to it. Thats in case theres an exhaust that runs underneath there. Thats just for clearance. Now, Ill repeat the same process I did for this side over here. Now, that we have our u-bolts placed in place, well take our Christmas tree looking springs and Ill put the thicker side or the base of the tree facing up. Ill take a flat washer and put in place. Then Ill take a nut. Lets hold that altogether. Well do the same for each of the 4 studs sticking down. Im going to tighten these down and we dont have to tighten it all the way down because we do want these to spring up. What Im going to do is Im going to tighten this down just until 1 or 2 of our threads is showing through on the other side of the nut. Now, that weve got our u-bolts and their nuts on place, go ahead and reinstall our exhaust. All right. I slid my rubber sleeve over our handle here. Im just going to insert this over the top and then come underneath and put our pin in place. All right. With our pin in place, I can pull our handle out then lock that in place and then I can put our ball in from the top. Our last bracket install is going to be the brake line bracket which was the first thing we took off. Im going to wind up the holes. Now, this isnt going to want to go back in place very easily because we had to move the brake lines down about half an inch right over here. When youre putting it in place, just be aware of that. You may have to do some slight bending but you definitely want to be careful because those are your brake lines and you dont want to clamp those off. Thats it for our Hide-A-Goose under-bed gooseneck trailer hitch, part number 9465-54 on our 2010 Chevrolet Silverado.Speaker 2: You could find this and everything else right here at etrailer.com. Whats up, man.


Customer Reviews

Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit - 30,000 lbs - 9465-54

Average Customer Rating:  4.8 out of 5 stars   (239 Customer Reviews)

Remove the ball on this gooseneck hitch and store it upside down inside of the hitch to get full use of your truck bed when you're not towing. Wheel-well-accessible handle makes it easy to engage and disengage. Custom installation kit included.

- 9465-54
by:
2005 Chevrolet Silverado

Very pleased with this product. Fairly easy to install. Came with all necessary hardware for installation. Have used extensively with no issues. Would recommend to others. 261157



- 9465-54
by:

This hitch is exactly what we needed to pull our camper. Worked great, but not the easiest to install, especially using the instructions that come with the hitch. After watching a YouTube video, which gave a much better understanding, I was able to install the hitch with a better idea of what I was doing. Do to the lack of written instructions I am giving this a 4 star instead of a 5 star. 418586


Comments

It still works great!!

Mike P - 08/15/2018

42373

- 9465-54
by:
2017 Chevrolet Silverado 1500

looks grate heavy metal well coated. I didn't realize it was that thick. simple instructions. at my age I will need help installing . or I can use my hoist through the 3.5 hole to lift it. etrailer good place to purchase items for my truck. 347937



- 9465-54
by:
2013 Chevrolet Silverado

Great product, I watched etrailers videos on installation of the hitch before it arrived and began disassembley of the truck, the video is very helpful in understanding the instructions with the hitch, the hitch arrived early in the day on the arrival date etrailer gave me, so I was able to finish installation that day. Thanks etrailer, Jason 463727



- 9465-54
by:

The gooseneck hutch and all other products bought were of good quality. The service is OUTSTANDING!!! 629416



- 9465-54
by:
2015 Chevrolet Silverado 1500

Great product! Easy installation! Quick delivery! Will be purchasing products from Etrailer again 545152



- 9465-54
by:
2008 Chevrolet Silverado

Works like a charm. 508192



- 9465-54
by:
2001 Chevrolet Silverado

Installation video was very helpful to ensure nothing was missed. 506663



- 9465-54
by:

Reasonably priced & easy installation 467979



- 9465-54
by:
2005 Chevrolet Silverado

I am very pleased with this product. My dad and I did the installation in an afternoon. It is not the easiest thing to do, so have at least another person to help you. You will need a torque wrench. I installed on a 2005 Chevy Silverado Z71 and it's a great fit. 350200



- 9465-54
by:
2013 Chevrolet Silverado 1500

Fast shipping. Install was moderately easy. The instructions say you can cut the hat channel on the bed or lift one side of the bed up to install, tried cutting the channel on my 2013 Siverado Z71 1500 and didn't have room to roll the angle irons over to line up the bolte. Just jack one side of the bed up and it will install easily. I have used it to haul tractors and campers and no problems with the hitch whatsoever. 344499



- 9465-54
by:
2008 Chevrolet Silverado

Easy to install, and works great! 334935



- 9465-54
by:
2014 GMC Sierra 1500

Good unit handles the tow well. Issue is that b/c of the way the brackets are, it was very difficult to find a air leveling system that was able to be bolted on w/o modification. I had to roll with a HellWigg system versus different ones. But over-all satisfied. 276179



- 9465-54
by:

Works great. Instructions a little hard to follow but other than that was good 267365



- 9465-54
by:

Excellent product. Easy to install and solid performance. Instructions were complete and easy to folllow. 251182



- 9465-54
by:
2015 Chevrolet Silverado

I put this in my 2015 Chevy Silverado, by myself. Overall all went well. Have used to pull my 57 Chevy and it pulled great. Thanks for the awesome people at etrailer, the magnetic piece that covers the neck when not using was not in package and they shipped right away. I would recommend this product. 242651



- 9465-54
by:
2011 GMC Sierra

The hitch arrived much quicker than anticipated!!:) Installed in half a days time if you include removing truck bed etc. and is proving to be a great quality reliable product. The wheel well handle is proving to be very handy as well especially if you are unhooking, etc alone. Very eager to make further purchases from this site to upgrade things on the same trailer!! 218462



- 9465-54
by:
2014 Chevrolet Silverado 1500

Talk about fast! Excellent Web page. Easy to use. Easy to order. Fast free shipping. Excellent updates on shipping and order status. Would use these guys again! Thank you 198833



- 9465-56
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Pretty good hitch, I’ve had and installed several gooseneck hitches and this one wasn’t bad to install. It’s well built and appears to exceed my trucks towing capacity, I advise to go ahead and lift the back of the bed up at least 2” to make it easier to install and align the hitch. I installed this on a 2018 GMC 2500 HD. 575037



- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


While initially I was frustrated with what was potentially going to be super slow shipping, the customer service at etrailer was fantastic. We ended up getting the hitch we ordered in a timely fashion and it came with easy to use instructions. The worst part was trying to cut the hole in the bed of the truck, but ended up working out fine. thank you etrailer! Excellent customer service. 553194



- 9467
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Very easy install. Bought this so I could utilize the Anderson 5th wheel adapter. No complaints here! Thanks etrailer... 368074



- 9465-36
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


I followed instructional video and it was very simple. Fits very well and looks great. Thanks for a great product and an instructional video. 569908



- 9464-38
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


The box for the installation brackets was busted up (I blame the shipping company for that), but all parts were there. The hitch and brackets are very well made and went easy, but it did take a little longer than I expected. I am planning on putting another gooseneck hitch on another truck I have and will definantely use etrailer again. etrailer had the best price, it came quickly, and they handle quality products. 390721



- 9465-40
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Perfect fit right out of the box....everything needed to install took bout an hour. I recommend this hitch for everybody. 245916



- 9466
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Great product. Good value. Still very satisfied with my purchase. 372639



- 9467
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Fit and finish was good, Easy to install. After on year of use I have no issues. I live in the north east, so I added additional undercoating to protect the hitch from the roads salt. 250413



- 9466
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Great product, couldn't be happier 476735



- 9467
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Product is a great fit for my 2016 Ram 2500. The installation videos are dead on which allowed me to install the hitch myself. DIY savings was approx. $125. Tip: In addition to bending the wire on the nut plates, use plastic zip ties to secure the wires. This will absolutely prevent any rattling noise. 400447



- 9465-56
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Fast shipping. Everything fit perfect. Hardest thing is fishing bolts up through box frame. Need to use two screwdrivers to keep up off of bottom of frame. I installed by myself in 3-4 hours. 2 people could do it in 2. Second gooseneck hitch I have gotten from Etrailer. Will get next one frim them. I highly recommend. 166295



- 9465-91
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Easy install once you get past the kinda confusing drawings. The safety hooks are pretty short, I just have the nuts flush with threads but can't get the hooks under them. I will have to look for longer ones. Took 3 hrs to install with having to remove hard tonneau cover and bed liner and reinstalling and clean up. Thought it would be worse!! The isolation tape they send with the hitch is kind of cheesy, hopefully it works. Was a great price! 435890


Comments

Hitch works great, no problems with the ball or linkages freezing up. Everything seems good. Have used it to pull a cattle trailer 12+ times this year.

Tom H - 09/24/2018

43964

- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


My son and I bought the Hide-a-Goose set up for his 2008 Dodge Ram 2500 Mega Cab. The shipping of the 111 lbs. packages (came in 2 boxes) was fast! Upon arrival, the instructions were right-on and easy to follow. We took our time and the installation went off without a hitch(pun intended!). We purchased the "no drilling required" kit and the only holes needed were through the truck bed. George kept us updated and we really appreciate the guys at etrailer. I highly recommend their products and would most definitely buy from etrailer again! Thanks guys! Leon W. 246677



- 9465-34
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


The customer service was spectacular which is great to find nowadays. The hitch I had a couple issues with however. Issue 1 was the the u-bolts for the safety chains are to short. I hooked up my trailer jumped in the back and couldn't get the chains in the loops without taking the nuts off the bolts putting on the chains and having my girlfriend push them down while i put the nuts on (I have a plastic bedliner which might have been the main issue here). Issue 2 is that online it says that I can tow 30,000lbs with this hitch. However when this hitch came in it said in multiple places in the mounting kit not to exceed 17,000lbs which makes me kind of nervous since I have to pull some heavy loads On the bright side though the hitch installed easier then i thought it would and I found etrailers YouTube video very helpful for it. I used it to pull a 13,000lb trailer this weekend and had no issues with it I'd probably buy this hitch again just because it's significantly cheaper then the blue ox and b&w hitches but I'd like them fix the above mentioned issues 386546



- 9465-40
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Fast service, easy install, side plates could be a bit heavier but looks like it will work just fine 232264



- 9468-94
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Good hitch. Love the drop and lock ball way more than my old hide-a-goose turnover ball. Installed it myself and only had to unbolt the brake like bracket. Left spare tire and exhaust in place. Put the ball in the center piece and slid it up and had my neighbor hold it by the ball while I put the conicals and nuts on. 519709



- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


It took me about a year to get around to putting it in... I didn't have to take out the exhaust like the video says. I have a 2012 short bed Cummins 4x4. Getting the bars in is fascinating. Everything is super heavy so you'll need help for sure. 564042



- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


I have bought from etrailer for many years now. Many hitches from a 2005 Toyota highlander hitch and wiring, to a 2012 Chrysler town and country hitch and wiring, brake controller to my most recent one a 2008 dodge ram mega cab gooseneck hitch. Every part I have bought have fit without any modification. The YouTube videos are specially helpful. I've recieved my shipment a few days ago which was way faster then I expected. Today i woke up ready to install it, I read the instructions and watched the YouTube video went under my truck bed and started working on it. I did mess up on the hole for the ball but that was my oops. Very satisfied. 501465



- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Ordered the hide a ball gooseneck hitch I had it in 4 business days with the free shipping, and if that wasn't good enough I found a cheaper priced hitch on another site after I bought it, and etrailer refunded me the difference plus 5% and lowered the price online so that the customers are getting the best bang for the buck with hands down the best customer service I have encountered yet. As far as the hitch goes it comes with plenty of instructions and all the hardware and took a buddy and I 2 hours from start to finish to complete. Great product, great service 168992



- 9465-45
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Excellent product, easy to follow directions. Videos was great help. Installers in videos make it seem a simple install. I would say if you haven't installed one before it will most likely take more time than expected. Take your time and follow directions step by step. Some unexpected encounters with my truck was a plastic channel than ran along bottom of wheel wheels on both sides that had wiring running thur them. Had to lower to install fasteners. The cross members have threaded studs on end that are painted. Take a wire brush and remove paint from the studs so nuts will go on easy. 57665



- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Very please with the customer service and the hitch! I called etrailer.com to verify the hitch would fit my 2005 Dodge Ram 3500 dually, as I wasn't entirely sure the application was the same for a standard bed and a dually. Lindy was extremely helpful, and I was able to place my order with her right over the phone. The hitch arrived on time, and I was able to install it with no significant problems. I say 'significant problems', as the custom exhaust installed by the previous owner was in the way, but that's a problem with my truck, not the hitch. A recommendation: get a computer, or tablet, or phone, and use the video for installation. The video was (by far!) the best explanation on how to install the hitch. I used both the video and the written instructions, and occasionally the written instructions made me scratch my head. The video immediately cleared up any confusion. A word of caution, though, don't throw out the written instructions. They have the measuring distance for drilling the holes in the bed and the torque specs for the bolts. The whole installation took about four hours, from pulling the truck into the garage to putting everything away after installing the hitch. Most of that time was trying to maneuver around the non-standard exhaust, though. If my truck had the factory exhaust, I figure it would have been about two to two and a half hours for installation. The only tool I had to get was the correct size hole saw for drilling out the bed to install the ball. Everything else in the installation just requires basic hand tools and a decent socket set. Overall, it was an easy installation, and a great product. I would highly recommend this hitch, and will purchase it again if, or when, I get another truck. 504530



- 9465-36
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Great service and delivered in date promised. Haven’t installed yet but a very satisfied with the service and correspondance if etrailer. I give you five plus stars. 492540



- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Great product at a great price! I measured out the 3.5" hole location as the directions said for a 8 ft bed on my 2010 Ram 3500 4X4 quad cab. I drilled the hole and deburred, Removed the rear fender well panels and proceded to slide the rails over the chasis. I had to bend the steel flange where the bed is put together during fabrication to have enough room to fit the rail between the bed and the chasis. This was only done on one side in one location. The rails slid right in and I continued on with the install. It was a little hard by myself but I managed. I did not have a lift and was lying on my back under the truck half the time. I did not have to remove my rear tires, raise the bed or remove exhaust to install. I did notice that I could have drilled the 3.5" hole about 3/8" to 1/4" less than the specified distance for perfect alignment on the chasis but all worked out well and it tows great! I'm very satisfied with my hitch and the experience with Etrailer, Thanks Etrailer! 182288



- 9460-39
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Hitch seems to be built fairly well as far as the head and rail kit. The side plates for the frame are not even as thick as my frame rail. Didn't like that. Also a major turn off to this hitch, on my truck, a 2001 dodge 2500 short bed, the carriage bolts that hold the head to the rails, the heads hit the bed floor, enough to where the bed does not sit flush on the frame. 4 1 inch holes had to be drilled in the bed to let the bolt heads through. Also used a hare bigger hole saw than 3.5 to give some wiggle room. But the bolts hitting the floor needs to be addressed by draw tite. Wouldn't recommend for a dodge pickup 191838



- 9465-36
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Decent hitch, not the first Draw-Tite product I've used. Designed well, plenty of room for adjustment built into the slots and holes of the parts. It's built heavier than I will ever be able to tow with my '07 Tundra. We're buying a 25 foot fifth wheel camper with a gooseneck adapter. Gooseneck hitches are supposed to be better for driving off road, which is a big plus for me. I have over 1000 feet of rutted gravel road and driveway to get the camper to our little retreat in the woods! I haven't towed the camper yet, but I will add comments when I do! It would have been easier to install with a lift versus working from a creeper, but it still only took four hours! I'm sure it would have been easier on a new truck as well, not as much rust! The drawing and instructions were good, but could have explained which bolts went where a bit better. I did figure it out after a bit. Worst part was fixing all the other stuff that I found when I rolled under the truck! Only negative is the magnetic "cap" to keep the dirt out. Ridiculous! It's a refrigerator magnet! Why put that cheap thing in with such a heavy duty piece of equipment? I will figure something out to cover the hitch and plug the hole in the bed. 391215


Comments

Had to remove the hitch when I had the frame replaced on my Tundra, so I had to install the hitch again! The hitch is in great shape after about 2500 miles of pulling a 6000 pound trailer. It works as advertised, was a good price, and got shipped fairly quick. If youre even slightly mechanically adept, you should have no problems with the install. Even if youre not that handy, watch videos online to figure it out! As far as the cheap magnetic cap, I found a large freeze plug and painted it black to match the bed lining! Works great!

Kerry J - 06/13/2018

39734

- 9465-37
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


After finally getting all the pieces to install the gooseneck hitch I got it installed in my pickup. It went together easier and quicker than I thought it would. I am also impressed by the good customer service from etrailer at getting the issues I had resolved. 643542



- 9464-35
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Great product, easy install l highly recommend it. Thanks 641432



- 9464-57
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Recieved my hitch in just 4 days as said. Inspected it and found all parts necessary to install. The hitch was made fron quality materials. Brandon was very helpful with my order of the gooseneck for my 13 Ram. And i chose the one Brandon recomended. Draw-Tite 9464-57 He was very knowledgeble about the hitch. Called him several times with questions and they were answered. I have not had time to install, but not expecting any problems. At this time I would recomend this product 638667



- 9465-56
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


The product arrived in about 2 days. When my husband opened it and went through the parts with the diagram he noticed that 2 carriage bolts were missing and had to go to Menard's to purchase them to complete the assembly. I sent an email about this matter to customer service. Other than that I was very pleased with the Draw-Tite hitch and ease of ordering and of course the free shipping! 638647



- 9465-40
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Good product and works well. Only downside is that it takes two people to turn over the ball or you have to tie the release lever in the open position. 634745



- 9465-56
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


Product was very easy to install, goes to say Installer needs to make sure they have correct tools and space for install. We did install into a 17' Chevy 3500 HD and everything went great. Since then, we've hauled multiple 45' shipping containers, bo problem! 633272



- 9465-56
by:

Review from a similar Draw-Tite Hide-A-Goose in Gooseneck


great product fast delivery 616598


57
250
Show More Reviews

Ask the Experts about this Draw-Tite Gooseneck
Do you have a question about this Gooseneck?


  • Best Gooseneck Hitch for 2016 GMC Sierra 1500 5-1/2 Foot Bed
  • You can put a gooseneck hitch in a 5-1/2 foot bed truck. A gooseneck hitch that is compatible with your 2016 GMC Sierra 1500 is the Draw-Tite Hide-A-Goose Underbed # 9465-54. This hitch includes everything you'll need for installation and doesn't require any drilling to install the frame brackets. There's a review video of the hitch attached. A way to get you more clearance is to use an offset ball. You will need one compatible with your hitch such as Offset Ball # 19308 to go with...
    view full answer...

  • Gooseneck Hitch, Wiring, Brake Controller and Spring Kit on 2014 Silverado 1500 with 5-1/2-Foot Bed
  • For your 5-1/2-foot bed 2014 Silverado 1500 I suggest the Draw-Tite Gooseneck hitch # 9465-54 along with the Offset Ball # 19308 and wiring harness # 20110. An install video is included for you. For a trailer brake controller I suggest the highly-reliable Prodigy P3 # 90195 along with the quick-connect install harness # 3016 which plugs in under the dash. The P3 offers easier installation and set-up than most other controllers and it has a legendary reputation for reliability. An install...
    view full answer...

  • Gooseneck Hitch Recommendation for 2014 Chevrolet Silverado 1500 Truck
  • As long as your 2014 Chevrolet Silverado 1500 does not have a Flareside or Stepside bed, the Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch, part # 9465-54 is designed to be a fit for your truck. This comes with the custom rail kit designed specifically for your Silverado. I have attached a link to a product review video for this gooseneck hitch you can check out. I recommend the Draw-Tite Hole Saw Bit for Hide-A-Goose Gooseneck Hitch Installation, part # 58381, that is...
    view full answer...

  • Fifth Wheel Hitch Adapter Compatible w/ Reese Hide-A-Goose Under Bed Gooseneck Hitch
  • My Curt representative tells me that they don't offer an X5 adapter model that would be compatible with your Draw-Tite # 9465-54 under bed gooseneck hitch. If you have a long bed truck, the Draw-Tite Hi-Rise Gooseneck to 5th wheel hitch adapter, part # 9480 would work well for you. Another option would be the Reese Goosebox, which would replace the existing 5th wheel's pin box. The Goosebox will allow the 5th wheel to connect directly to the gooseneck ball, without an adapter needed....
    view full answer...

  • How Does the Draw-Tite Hide-A-Goose Gooseneck Trailer Hitch Install on a 2012 Chevy Silverado 1500
  • There should be some holes in the truck frame on a 2012 Chevy Silverado 1500, you just may not be able to see them unless you know where to look. I have included a link to the installation instructions for the install kit and for the hitch portions. Compare these locations in the instructions to your truck to determine if your truck does have the mounting locations specified. The u-bolts you see are actually for safety chains from the trailer to the hitch. For a short bed truck I...
    view full answer...

  • Gooseneck Rail Kit for a 2006 Chevrolet Silverado 1500 6-1/2 or 8 foot Bed
  • The Hide-A-Goose Rail Kit Only, # 50111, that you referred to is the correct installation kit for your 2006 Chevrolet 1500 Silverado with 6-1/2 or 8 foot bed, but according to the manufacturer this kit will work with the older 63102 hide a goose head only and will not work with current model head, # 9465. The older head is no longer available. If you currently have a Hide-A-Goose head that is older than approximately 2008, then this may be the kit you need. The current gooseneck trailer...
    view full answer...

  • Gooseneck Hitch Recommendation for a 2007 GMC Sierra 1500 Short Bed
  • First thing you need to do is check the owners manual to determine what the towing capacities are for your 2007 GMC Sierra 1500. You will need to add up the weight of your trailer and horses and compare that figure to the capacity to determine if it would be adequate or not. For a gooseneck hitch the Draw Tite part # 9465-54 that you referenced would fit your vehicle and would work well. I attached an install video for you to check out as well.
    view full answer...

  • Where Is Hole Drilled In Bed Of 2005 Chevrolet Silverado 1500 LD Short Bed For Gooseneck Hitch
  • The 4 inch hole location that is to be drilled in the bed of your 2005 Chevrolet Silverado depends on the hitch you plan to install. They vary by manufacturer, so it would be difficult to tell you just one location until you choose the hitch you want to install. For example, if you are interested in the Curt Gooseneck Hitch, part # C630-652, The center of the 4 inch hole will be 44 1/16 inches from the back edge of the bed. You would need to hook a tape measure on the end of the bed...
    view full answer...

  • Recommended Air Suspension System For 2014 Chevrolet Silverado With Hide-A-Goose Installed
  • Because of the positioning of the brackets when installing the Hide-A-Goose Underbed Gooseneck Trailer Hitch, part # 9465-54, installing any other system that has to be attached to the frame rail on either side would pose a problem. We do have a solution for you though. I recommend the Firestone Ride-Rite Air Helper Springs, part # F2430. This system attaches an upper bracket to the bracket on the vehicle frame rail that is where the bump stop is installed. This is also an air system...
    view full answer...

  • Is the Hide-A-Goose Underbed Gooseneck Trailer Hitch A Bolt-On Fit for a 2011 Chevy 1500
  • Yes, the Hide-A-Goose Underbed Gooseneck Trailer Hitch with Custom Installation Kit part # 9465-54 is a direct bolt-on fit for your 2011 Chevrolet Silverado 1500 with the 6-1/2' bed (non-flare/stepside). However, you will need to drill into the bed floor for the hitch ball opening and safety chain loops but I am sure this is of no surprise to you. If you don't already have a 3-1/2" hole saw for the hitch ball opening you can use the 3-1/2" Hole Saw for Hide-A-Goose Gooseneck Hitch Installation...
    view full answer...

  • Gooseneck Hitch Fit for 2015 Chevrolet Silverado 1500 with 6-1/2-Foot Bed
  • We can help you with a gooseneck hitch for your 2015 Chevrolet Silverado 1500 with 6-1/2-foot bed. All options are shown on the linked page. If you will not need to also tow 5th wheel trailers then I suggest the Draw-Tite # 9465-54. For wiring you can use part # 20110. But if you think there is a chance you'll also want to tow 5th wheels, then the goose neck kit I recommend is the B&W # BWGNRK1057. This is a complete goose neck hitch system, but it also serves as the mounting kit...
    view full answer...

  • Gooseneck Trailer Hitch for a 2000 Chevy Silverado 2500 Short Bed
  • Draw-Tite gooseneck trailer hitch # 9465-34 fits a 2001 Chevy Silverado 2500 short bed but is not listed for the 2000 model year. Typically the 3/4 and 1-ton models are a year behind as far as design compared to the 1/2 tons. If we go by that then a 2000 2500 should look more like a 1999 C/K series. For a 2000 Chevy Silverado 2500 short bed you would need # 9465-54. In 2000 I do not believe the 2500 models were called HDs. But you could actually have a 2001. The build date is likely...
    view full answer...

  • Location of Hide-A-Goose Hitch Ball in 2012 Chevrolet Silverado with 5-1/2 Foot Bed
  • On your 2012 Chevrolet Silverado 1500 with the 5-1/2 foot bed the Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch # 9465-54 will install 44-3/4 inches from the rear edge of the truck's bed. That is where the center of hole will be. With such a short bed truck I suggest using the 5 Inch Offset Ball # 19308 as well. This moved the pivot poing 5 inches rearward to give you extra clearance from your truck's cab.
    view full answer...

  • Gooseneck Trailer Hitch for a 2015 Chevy Silverado 1500 with 5-1/2 Foot Bed
  • Yes, you can add a gooseneck trailer hitch to your 2015 Chevy Silverado 1500 with the 5-1/2 foot bed. You can use the Draw-Tite Hide-A-Goose, # 9465-54. I confirmed with Draw-Tite that it will fit the 5-1/2 foot bed models. I have linked a video showing installation on an older Silverado to give you an idea of how it installs.
    view full answer...

  • Gooseneck Trailer Hitch for a 2009 Chevy Silverado 1500 with 5-1/2 Foot Bed
  • First, for a gooseneck trailer you will need a gooseneck hitch in your 2009 Chevy Silverado 1500 with 5-1/2 foot bed. I recommend the Draw-Tite Hide-A-Goose, # 9465-54. Then, to get more clearance, you could replace the coupler on the trailer with one that has an offset. Coupler # BWTEXA4200 has a 10 inch offset and is going to be the best chance for being able to make tight turns.
    view full answer...

  • Gooseneck Hitch Recommendation for a 2015 Chevy Silverado Short Bed
  • The Draw Tite Gooseneck Hitch part # 9465-54 has been confirmed as a fit for your 2015 Chevy Silverado 1500 4WD with a short bed so it would be a great option for you. I am not sure where you saw that this hitch wouldn't fit, but I can assure you it will work great in your truck.
    view full answer...

  • Location of Center of Hide-A-Goose Gooseneck Ball on a 2005 Chevy Silverado 1500 Z71
  • First, on a 2005 Chevy Silverado 1500, you would need to use # 9465-54. The installation kit for the hitch your referenced is not designed for the 1500. For 9465-54 the measurement is 44-3/4 inches from the rear edge of the bed forward. See instructions link. The ball should be centered in most every case either directly above the rear axle or a few inches in front of the rear axle. Any further back than this and the truck will ride high in the front causing steering and braking problems.
    view full answer...

  • Where Does Draw Tite Trailer Hitch Install in Bed of 2002 Chevy Silverado 2500HD
  • I checked with Draw Tite and I have instructions on how and where to install one of their gooseneck hitches but it's actually the part # 9465-54 and not the # 9465-34 that you referenced. Here's how to find where to install the hitch: The hitch ball must be located along the truck’s fore/aft centerline. The hitch ball centerline must be located above and forward of the rear axle of the truck. Adequate clearance must be provided between the gooseneck trailer and the rear of the vehicle...
    view full answer...

  • Gooseneck Trailer Hitch for a 2011 GMC Sierra 3500, Long Bed, Dually
  • I spoke with my contact at Draw-Tite and he stated that the Hide-A-Goose gooseneck trailer hitch, # 9465-56, will fit the 2011 GMC Sierra 3500 Dually. I have included a link to the installation instructions for you to view.
    view full answer...

  • Will Draw Tite Hitch part # 9465-54 Fit a 2012 Chevy Silverado 5-1/2 ft Bed
  • The Draw Tite Gooseneck Hitch part # 9465-54 that you referenced is a confirmed fit for your 2012 Chevy Silverado with a 5-1/2 foot bed. Since your truck bed is so short and fifth wheel trailers typically have very wide noses you are going to need the offset part # 19308 but still may not have enough clearance. Here is a formula to determine if you would have enough clearance. (A + B) - C = Clearance A = Distance from the fifth wheel jaw/gooseneck ball center to the truck cab. (for...
    view full answer...

  • Gooseneck, Wiring, and Brake Controller Recommendation for 2000 Chevrolet Silverado 1500
  • The gooseneck trailer hitch that you reference, the Draw-Tite Hid-A-Goose Underbed Gooseneck Trailer Hitch with Installation Kit # 9465-54 is confirmed to fit your 2000 Chevrolet Silverado. This gooseneck has a gross towing weight of 30,000 pounds with a vertical load limit of 7,500 pounds. I recommend checking the owner's manual of your Silverado to ensure the towing capacity of your vehicle. I have attached an installation video of this hitch in a newer model year Silverado for you. The...
    view full answer...


Do you have a question about this Gooseneck?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality gooseneck for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate gooseneck information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Video Edited:
Zack K
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Expert Research:
Adam R
Video Edited:
Kathleen M
Updated by:
Laura H
Expert Research:
Jeffrey L
Updated by:
Sarah W
Updated by:
Alexander C
Test Fit:
Matthew S
Test Fit:
Brent H
Test Fit:
Robert C
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924