

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
/
B and W/
Below the Bed/
Removable Ball - Stores in Hitch/
2-5/16 Hitch Ball/
Wheel Well ReleaseItem # BWGNRK1104
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.
Features:
Specs:
With the B&W Turnoverball underbed gooseneck trailer hitch you get the best of both worlds. When you go to tow, the Turnoverball creates a sturdy, dependable connection with your gooseneck trailer. And when you're done towing, you can stow the ball upside down in the hitch to get full bed access and a clean appearance.
The durable steel hitch ball included with the Turnoverball system secures in the hitch with a sturdy, 5/8" thick steel pin that is incorporated into the end of the operating handle. To lock the ball in place, drop it into the hitch hole in the bed of your truck. Then rotate the handle in your driver's-side wheel well counterclockwise until the latch engages. When the latch is engaged, the spring-loaded pin on the end of the handle will be inserted all the way through the base of the hitch ball, forming a strong, solid connection and ensuring absolute security when you're towing.
When you're done towing, remove the hitch ball by simply pulling the handle out as far as it will go and then rotating it clockwise until it unlatches. Remove the ball, flip it upside down, and drop it back into the ball hole of the hitch. Then reengage the latch to secure the stowed ball in place.
Unlike typical gooseneck balls - which have round bases - the Turnoverball hitch ball is designed with a square base. This makes latching the ball in the hitch easier because the base won't rotate inside of the hitch like a round base might, so lining the pin up is a snap. The base of the ball also fits tightly within the ball hole during storage. Because only the corners of the base contact the sides of the socket, any dirt or grime that gets into the hitch will fall through the socket, thus helping to prevent any buildup that could cause the ball to seize up in the hitch.
Simple, Custom Installation
This hitch is custom designed for your vehicle. The included mounting brackets bolt to existing holes in your truck's frame. While some modification is required - you will need to cut a 4" diameter hole in your bed for the hitch ball and drill holes for the built-in safety chain loops - there is no need to weld onto or to drill into your frame.
Once you have the hitch brackets and body installed, set up the operating handle. This handle is designed to be accessed from the rear driver's-side wheel well. On the end of the handle is the heavy-duty steel pin that secures the hitch ball.
B&W makes it easy to tow just about anything. With the many adapters and accessories available, the Turnoverball can be made to work with almost any gooseneck trailer. Hitch balls are available that have a built-in rise, an offset, and even a different connection type. Add on the Companion fifth-wheel hitch - which attaches directly to the Turnoverball with no other parts required - and you can tow your fifth-wheel trailer. Even a truck bed utility rack is available so that you can easily haul ladders and lumber with the load placed on the hitch (and therefore your truck's frame) instead of your bed rails.
2004 - 2014 Ford F-150 5-1/2 Foot Bed
2004 - 2014 Ford F-150 6-1/2 Foot Bed
2004 - 2014 Ford F-150 8 Foot Bed
Video of B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to review part number BWGNRK1104. This is the B & W Turnover Ball under bed gooseneck tailor-hitch with custom installation kit, and has a 30,000 weight pound capacity. Now for demonstrations purposes I do have this under bed gooseneck-hitch attached to the custom installation brackets and this would be how it would look under your vehicle. It is designed to fit the Ford F150 trucks with either the six and a half foot or the eight foot bed beginning in 2004. Now I would recommend to get a correct fitment is to check the product page for this part number and at the bottom of the page it will list the actual yearsand models of the Ford F150 that this would fit on. Now this is a heavy duty under bed hitch, which will let you tow your gooseneck trailer. If you pull out the ball, it will give you complete truck bed access when you are not towing, and you could actually store the ball by just removing it and turning it upside down, drop it back into the hitch, and if you release this handle, twist it and release the pin. It would lock it into place.
It is not going to go anywhere. When you release this handle, right underneath here on the end of this handle is a 5/8 inch diameter spring loaded steel locking pin. When you pull and twist this to lock it open, you can pull this out. That 5/8 inch diameter locking pin is what would go through this and hold this ball secure into place. This handle right here was accessible at the rear driver side wheel well. If you'll notice this turnover ball is a single piece machine ball socket, provides rugged durability, has a square ball based to prevent the ball from turning into hitch during hook up.
When you drop it into the square opening in the gooseneck, you can see when your hooking up this will not turn. Also on this ball socket you can see the corners are actually chamfered and what that does is when you actually drop it in there that chamfer will leave an opening in each corner. What that will do is help prevent any dirt or grind from building up and causing any problems when you are trying to drop the ball in or remove it. Now this B & W under bed gooseneck hitch is specifically designed to use B & W accessories that we sell separately. That will make it easy to customize this hitch to fit your needs. One of the popular accessories that are sold with this is lots of times people might need a situation where they'll need to tow a fifth wheel trailer instead of a gooseneck trailer.Well B & W offers the companion fifth wheel hitch adapter, and what that will let you do is you could remove the ball and if you are needing to at some time tow a fifth wheel trailer, the companion fifth wheel hitch adapter will actually drop into your bed and give you a fifth wheel hitch, and it has a post in the middle that would insert down into this opening here.
Then youll turn your handle and lock it into place so youll actually be able to tow a fifth wheel because you'll have a fifth wheel hitch installed in your bed. That is an accessory that we do sell a lot of. It also, if you notice, has the spring loaded safety chain hook-ups, which are built in. You just hook your safety chains and let it go, and itll hold into place. This is a very simple installation. It comes with the included custom installation kit we show here and all the hardware that is needed.
There is no welding required and the truck bed does not have to be removed for this to be installed. It does require a four inch diameter hole to be cut in into the bed to have access to this opening, and for four holes for your spring loaded safety chain hook-ups to fit through. This is made of powder coated steel, which is sturdy and corrosion resistant. It is made in the USA. Again, this has a gross towing rate capacity of 30,000 pounds, has a vertical load limit or pin weight capacity of 7500 pounds. The ball size if you'll notice on this gooseneck turnover ball is two and 5/16 in diameter. It does come with a limited lifetime warranty. Again just to show you how this operates, I have the handle locked into open position, so if you are going to tow a gooseneck, you can drop the ball into place. Again twist it. That will release it. That pin will lock it, the ball, so there is no movement at all. You do your towing. When you are done and you want to remove the ball, just pull out on this handle, twist it. That locks it open, pull it out. If you want to store it, just go ahead and drop the ball into place. There is a little handle that you can grip it on to. Then lock it down, twist it. It locks into place and then you have full access to your truck bed. That should do it for the review on part number BWGNRK1104, the B & W turnover ball under bed gooseneck trailer-hitch with the custom installation kit. .
Average Customer Rating: 4.9 out of 5 stars (672 Customer Reviews)
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch. by: Mike C.07/21/2017
This is an excellent product. I have hauled my trailer loaded with my tractor multiple times. This hitch has performed flawless. I would certainly recommend. It is so much easier to haul a gooseneck trailer than a bumper hitch. The truck is much smoother and seems to handle the load much better. The thing I like most about the hitch is that you can hide the ball when you need to use your truck bed to haul other stuff. I would definitely purchase again. 408732
After a year of ownership I am still 100 satisfied. I will definately purchase again. When I get ready to trade my truck my new truck will get one of these hitches.
by: Mike10/18/2018
Excellent product and extremely great service from etrailer. I will buy from them again 575312
by: Tim M01/29/2019
Excellent product and excellent service from etrailer. It's the 2nd B and W hitch I've gotten and they work very good 601298
by: Robert01/07/2019
I am pleased with this product. It was shipped to me quickly. Installation was easy everything lined up making it go smooth. 595474
by: Gary03/01/2018
Great service good product definitely use again 480075
by: Doug08/25/2017
Good Product 425133
by: Tim S.06/03/2017
I am very happy with my B&W hitch it was easy to install and works great!!! 388373
I am still very happy with my B&W hitch. I will buy another one when I get another truck.
by: Brett S.05/22/2017
Everything as promised. Fast shipping, great communication. Thanks 383463
by: Kellie09/30/2016
I'm extremely happy with my hitch so far. I installed it in about 4hrs. (All by myself) I'm not saying it was easy, but definitely not as difficult as a thought. I went and picked up my new gooseneck trailer with it and all was wonderful. I can't thank you enough. 301917
by: Richard09/22/2016
Excellent 297773
by: Jim05/27/2015
Arrived quickly even with the holiday weekend. It took 3 hours to install by myself. Everything went together like it was supposed to. Just need to tow the trailer with it. Very satisfied with the customer service and the product. Will order again in the the future and refer people to e trailer 198189
by: Todd12/02/2017
Review from a similar B and W Turnoverball in Gooseneck
Installed this hitch in my 2017 Ram 2500 6.7 Cummins with absolutely no issues. Was very impressed with the detailed instructions. Used a friend of mine’s shop to do the work, it is definitely a two person job unless you have away to hold the hitch in place while you get the four bolts started. No specilized tools needed. I would highly recommend this to anyone that has a need for this type of hitch. Thank you George J and thank you etrailer for the grate product and price. 456487
Still working great !!! Thank You for providing a great product.
by: Mark11/21/2017
Review from a similar B and W Turnoverball in Gooseneck
This unit was very handy to be able to purchase and install on my Bradford Built flatbed so that I could install my B&W companion hitch with flatbed base on the truck. The welding was all fairly straight forward and didn't require much except for a few washers and a piece of flat steel for a spacer. The one down side is that the hitch pin/handle does not have any built in twist-n-lock method to lock it so the pin remains disengaged for the ball or companion assembly install like on the common B&W under truck bed assemblies I've had on several trucks. We ended up installing the pin slightly out of line so that the tip of the pin would catch on the exterior of the receiver when pulled out and then when I wanted to engage the pin just push up on the handle and press the pin back in. I do like that I can still cover the hitch hole with the cover plate as seen in the picture. 453876
I still like the hitch and use it with my companion frequently but wish there was a twist and lock function like all the other B&W underbed hitches.
by: Spencer10/03/2018
Review from a similar B and W Turnoverball in Gooseneck
Been doing bussiness with etrailer for a couple years now and the aways do an excellent job. 571258
by: Don10/24/2018
Review from a similar B and W Turnoverball in Gooseneck
I had the drop in hitch installed recently and hooked up to my gooseneck cattle trailer and pulled it about 300 miles. I am thankful to say that everything worked wonderfully well. I experienced no problems, and I am very satisfied with this product. 577102
by: Steve08/27/2018
Review from a similar B and W Turnoverball in Gooseneck
Very easy to install, used a support strap to support the center section as suggested during installation. All bolts and related hardware fit great. Would recommend that you have a 1/2" drive 3/4" swivel socket and 1/2"extensions to make installation easier. 558609
by: Miles06/10/2017
Review from a similar B and W Turnoverball in Gooseneck
Great product. Very happy with quality. Shipping was fast and on time 391380
by: Kimberly09/04/2018
Review from a similar B and W Turnoverball in Gooseneck
Everything was what I expected all parts were there even though the box with the rails and bolts was open when I received it. Would buy again very satisfied 561635
by: Jason J.08/19/2015
Review from a similar B and W Turnoverball in Gooseneck
Great service and fast delivery very friendly staff great product not to hard to install 220348
by: Justin C.06/19/2017
Review from a similar B and W Turnoverball in Gooseneck
Product was as advertised and a breeze to install thanks for a quality product 395943
by: Ed W10/15/2017
Review from a similar B and W Turnoverball in Gooseneck
Easy installation. Excellent instructi ons 442821
by: Andy09/25/2017
Review from a similar B and W Turnoverball in Gooseneck
Well made hitch. Straight forward to in stall 436277
As far as we know the person is satisfied with it
by: Bill09/28/2018
Review from a similar B and W Turnoverball in Gooseneck
Been running B&W hitches since they first come out. Always a good heavy duty product and i love the fact it does not take up any bed space. Etrailer is the only place i will buy anything trailer towing Related. 569905
by: Donald10/20/2018
Review from a similar B and W Turnoverball in Gooseneck
We use our hitch on a gooseneck trailer pulled by an F250. The hitch is freaking perfect. No problems at all. 576006
by: Brandon06/01/2018
Review from a similar B and W Turnoverball in Gooseneck
Installation was done by myself in 3/4 of a day. It works as it should and is nice having a true hideaway, YOU DO NOT have to lift the bed for this installation. Doing so would be much more difficult. Follow the instructional videos and directions for install and you will have zero issues. 515509
by: mark s crain02/08/2017
Review from a similar B and W Turnoverball in Gooseneck
hitch was just perfect 339777
we have purchased 3 of these hitches from you and I wouldnt buy any other, they work great
by: Joshua F.10/09/2018
Review from a similar B and W Turnoverball in Gooseneck
Great hitch! Hands down better in every way than the competitor. Spend the extra money and get the B&W. Installation was pretty straight forward, and as always great customer service from etrailer. 572872
by: Travis Smith07/29/2016
Review from a similar B and W Turnoverball in Gooseneck
Great product. Easy to install, the installation video helped alot. It's alot better if you have two people to help. I would highly recommend this product to anyone. And is made in America, doesn't get much better than that. 277393
by: B & T Tree & Grading09/13/2017
Review from a similar B and W Turnoverball in Gooseneck
Recently purchased the B & W turnover ball gooseneck hitch from etrailer and have been using it now for approximately eight months and have had no issues. Sales representative, ( Hally C. ) was very helpful and knowledgeable about the product. Highly recommended asking for Hally C. For your sales representative. 432151
by: Scott P.01/18/2017
Review from a similar B and W Turnoverball in Gooseneck
Bought the B&W gooseneck hitch for 2017 Ford F-350 dually and it fit perfect. Great product!!! 333575
by: Jeff K.10/15/2015
Review from a similar B and W Turnoverball in Gooseneck
This is the third B & W turnover ball hitch I've installed on my trucks. Quality is great. Instillation time is about two hours, and relatively easy. 230010
Great
by: Christian09/25/2018
Review from a similar B and W Turnoverball in Gooseneck
As most B&W products are it fit perfect in my 16 Ram 2500 just wished I would have had an extra pair of hands cause it gets heavy installing by yourself. The template for the safety chain hooks was also a big plus not having to drill from the bottom of the truck. Will continue to buy from etrailer as I always get the fastest and cheapest around. 568806
by: ABM RANCH04/08/2017
Review from a similar B and W Turnoverball in Gooseneck
Quality product. Install is relatively easy with the exception of the safety chain holes. It's pretty impossible to maneuver a drill from underneath with the exhaust pipe in the way. Before installing, I made a plywood template of the 4 inch hole and safety chain holes. I was then able to drill the holes from the bed. It made it easy. 364613
by: Mike R09/29/2017
Review from a similar B and W Turnoverball in Gooseneck
Relatively easy to install but I would recommend youtubing how to install it first! Made things much easier!! 437744
by: Jack P07/14/2017
Review from a similar B and W Turnoverball in Gooseneck
Works great, easy installation. Only suggestion to the installation, on a 2016 2500HD, don't cut the notch in the side of the bed, simply loosen the bolts on the side of the bed to the frame, lift the bed a couple inches and slide the rails in as needed. The area the instructions refer to notching the bed isn't enough to allow the rails to slide in. Otherwise I would give 4 stars. 405641
by: Joe G.08/07/2016
Review from a similar B and W Turnoverball in Gooseneck
I needed a gooseneck hitch to haul cattle to market in my new 26ft. stock trailer. I installed the Turnover Ball Gooseneck Hitch in my 2012 Silverado 2500HD in a little over 3hrs by myself laying flat on the ground. If I'd had a lift, it would have been much easier. That installation instructions were dead on! Great looking hitch and adds value to my truck. 280892
by: tbar04/08/2015
Review from a similar B and W Turnoverball in Gooseneck
I ordered the turnover ball hitch for a 07 dodge and a couple of items online and received it in a couple of days which was great . The b&w hitch is fairly easy to install and took 2.5 hrs or so .the only problem I had was the inside frame bolts hanging up in the frame . After removing the bolts that hold the rubber travel stops to the frame they slid right thru . 184161
by: Lee H11/17/2016
Review from a similar B and W Turnoverball in Gooseneck
This is the 3rd vehicle that I have put this hitch in and have 0 complaints. Installation is pretty straight forward and the instructions are easy to follow. If you take a bolt and clean the paint out of holes in the front cross member it will make your life a lot easier when you install. Great service from etrailer amd a great product. Only complaint is that the video for my truck, 2001 dodge 2500, on etrailers website is for a lot newer truck and did not apply to my vehicle at all. 317595
by: Anthony04/10/2018
Review from a similar B and W Turnoverball in Gooseneck
Ordered this 1313 for my 2004 Dodge 3500, converting from 5th wheel to gooseneck, but the trailer I ordered had a "reservation deadline" i.e. don't pick it up by this date and we sell it someone else...) so I needed the hitch right away, it arrived two days before expected and now I am ahead of schedule. Your online installation pictures and videos are excellent and helped me make my buying decision. Why buy from [other online retailer] when you can get it all here at etrailer with great support and fast service? Not to mention etrailer has everything I needed to make this gooseneck conversion happen. And ... The MOST important thing is everything I bought today is made in the USA! 494692
by: James S,06/26/2017
Review from a similar B and W Turnoverball in Gooseneck
The B&W Hitch and wiring harness I purchased worked great. Did the install myself which was a job but the instructions were good and the video may it fairly straightforward. The wireing harness had to be 100% wire-for-wire soldered into place becaue the original connector on my truck had been damaged and replaced. So the plug-and-play part not working was a surprise but we dealt with it. All-in-all a perfect fir for everything. I would highly recommend both items. Great quality and ease of use perfect. 400724
by: Jerry K12/31/2016
Review from a similar B and W Turnoverball in Gooseneck
You guys rock! Sal helped me choose through correct unit for my truck. Shipping was fast, received it in 3 days. Will be installing it after the holidays are over. Etrailer is the best company that I have come across for out Truck and trailer needs. They are my first call when I need something. Thanks again. Happy New Year 329043
by: Bill Koons02/23/2016
Review from a similar B and W Turnoverball in Gooseneck
Very prompt service. Thank You 238525
To be honest I have not used it since installing it. But it looks great. I am sure it will do exactly what I want it to do when I do get ready to use it.
by: James B.01/23/2017
Review from a similar B and W Turnoverball in Gooseneck
I purchased hitch # BWGNRK1108 a year ago and it works teriffic. It was easy to install as we had the bed off the truck at the time of instillation. I would recomend this hitch to anyone. Thank you again for the excellant pricing. James B 334567
by: DJ04/18/2016
Review from a similar B and W Turnoverball in Gooseneck
Product was well made. Easy installation was a little disappointed with the pin that locks the ball into place it does not pull out of the ball all the way and usually results in me crawling underneath my truck with a hammer to knock the pin out. 245948
by: Bryan H08/07/2017
Review from a similar B and W Turnoverball in Gooseneck
Order arrived very quickly. Installed within a couple of hours with a helper. Fits perfectly. Used it for pulling a 16 ft. gooseneck cattle trailer. Like the fact that it stays out of the way when not using it. Provides good weight distribution, F150 easily handled load. 417443
Still pleased with it. Thanks.
by: Irv05/16/2017
Review from a similar B and W Turnoverball in Gooseneck
Great price 381197
by: JonB.07/21/2018
Review from a similar B and W Turnoverball in Gooseneck
Had similar hitch in my Dodge 2500 for towing a 3-horse horse trailer. I liked it so when I decided to put a gooseneck hitch in my 2002 Ford F250 Super Duty 4WD I went with B&W again. I have used etrailer before; liked their support and could't find a better deal. Installation instructions were clear and an online video of installation on a 2003 Ford was much like mine. Gave me all the confidence I needed for a DIY install. I my case I didn't have a rack which would have made life easier. I had all the tools and did the job without needing to cut the bed ridge and without removing the rear tires or dropping the spare (couldn't find the $#@! jack handle that fits the mechanism). It took about 3 hours. With a rack and no tires it'd get done in under 2 hours for sure. 544034
by: Thom B.01/21/2015
Review from a similar B and W Turnoverball in Gooseneck
Good old boys (and good old girls) that are in the know for tow products raved about the B&W product. My good buddy has installed several on trucks he's owned. I went with their advice and went with B&W. After watching a couple of YouTube videos I felt confident and went for it. The installation was easy and 'factory perfect.' I saved hundreds of dollars doing this myself and doing so got me up off the couch for a few hours. I have a product which will perform year after year, mile after mile. Awesome. 170683
by: Randy06/15/2017
Review from a similar B and W Turnoverball in Gooseneck
I would recommend saving the extra cash and buying a draw Tite. After 1 year the B&W has alot of surface rust starting and the lever to remove the ball gets stuck all the time even after coating it with oil. I had a draw Tite on my previous truck and couldn't have been happier 394377
by: Brian09/27/2018
Review from a similar B and W Turnoverball in Gooseneck
Great product, install's with ease. 569327
Ask the Experts about this B and W Gooseneck
Do you have a question about this Gooseneck?
Do you have a question about this Gooseneck?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.