B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs

Thank you for great service again. The hitch was delivered early, and you guys, and gals give excellent advice. 704008

by: william06/04/2019

Review from a similar B and W Turnoverball in Gooseneck

The Best 653138

Review from a similar B and W Turnoverball in Gooseneck

The best hitch on the market... 629675

Review from a similar B and W Turnoverball in Gooseneck

Easy install and everything you need 608884

by: Cav C.06/17/2019

Review from a similar B and W Turnoverball in Gooseneck

Product is constructed well! Pretty good instructions. I installed it in a couple hours. Would be easier to install with some help from a buddy. A little difficult holding the plate up while trying to bolt it up to the frame. I managed by using a ratchet strap attached to my shop rafters and down through the hole in the bed. Snugged the plate up and bolted in place. 659411

by: Daniel07/12/2019

Review from a similar B and W Turnoverball in Gooseneck

Install was easy. Everything fit perfectly. The only thing I wish it had was a way to lock the release handle. Turning the ball over is a two man job. 669596

by: Roger M09/27/2019

Review from a similar B and W Turnoverball in Gooseneck

hitch worked fine; went with truck when I traded. 708357

Review from a similar B and W Turnoverball in Gooseneck

Watch the install video on here before you install it, the video is very well done. 1. Lower the spare tire 2. Remove the heat shield 3. Drop the exhaust, at least the rear hanger. 4. Hang the hitch plate using a rope or something from inside the bed. Holding it while starting the bolts sucks. Doing those things will save you hours of time. You might be able to wiggle that plate in without doing those things but the install will go from super easy to extremely difficult. I tried. After doing it once, I'm pretty sure I could do it again in an hour or less. Very happy with the hitch on a 2018 Ram 2500. etrailer rocks. 619981

Review from a similar B and W Turnoverball in Gooseneck

Fast delivery and a super easy install. I installed this laying in my driveway, only took about 2 hours with the wire harness install as well. 713467

Click to Enlarge

Review from a similar B and W Turnoverball in Gooseneck

Great price 381197

Review from a similar B and W Turnoverball in Gooseneck

Great service and fast delivery very friendly staff great product not to hard to install 220348

by: Andrea05/22/2016

Review from a similar B and W Turnoverball in Gooseneck

Great hitch. I put one of these in every truck I get and recommend friends to use this hitch also. 251076

by: Lance03/05/2018

Review from a similar B and W Turnoverball in Gooseneck

works great, have had no problems, easy to install. 481206

Review from a similar B and W Turnoverball in Gooseneck

I was nervous about installiton of the gooseneck hitch at first. I watched several videos that really helped and the install went flawlessly. B&W is a quality product and has a precise fit. Would recommend!! 361583

Awesome setup. Use the hitch all the time and it works great.

Stan - 04/01/2018

Review from a similar B and W Turnoverball in Gooseneck

As most B&W products are it fit perfect in my 16 Ram 2500 just wished I would have had an extra pair of hands cause it gets heavy installing by yourself. The template for the safety chain hooks was also a big plus not having to drill from the bottom of the truck. Will continue to buy from etrailer as I always get the fastest and cheapest around. 568806

Review from a similar B and W Turnoverball in Gooseneck

Everything was what I expected all parts were there even though the box with the rails and bolts was open when I received it. Would buy again very satisfied 561635

Review from a similar B and W Turnoverball in Gooseneck

The hitch works great and installing the hitch wasn't bad at all even for just one person. The instructions were clear and the pictures they included were helpful. The only thing I had a problem with was one of the boxes were damaged and one of the small brackets were slightly bent, but I didn't need it anyways b/c it was for the diesel models and mine is a gas. I don't blame etrailer or B&W for that. Maybe B&W could use heavier boxes. All in all I had a good experience. etrailer.com was easy and great to buy from and B&W has a great product. 454700

So far I have been very happy with the B&W gooseneck ball hitch. I haven’t put a whole lot of milesuse on it but every time I use it with my gooseneck it preforms like it should. If I have any other needs trailer related I plan on giving your website a look first. Thanks and happy holidays!

Lance - 11/26/2018

by: Victor12/11/2018

Review from a similar B and W Turnoverball in Gooseneck

These units are easy to install and easy to use for both ball and 5th wheel towing. Putting it on a ‘97 F350, found all the holes aligned perfectly. Made it possible to switch vehicles to tow a 5’r using the companion hitch. 589836

Click to Enlarge

by: Bryan H08/07/2017

Review from a similar B and W Turnoverball in Gooseneck

Order arrived very quickly. Installed within a couple of hours with a helper. Fits perfectly. Used it for pulling a 16 ft. gooseneck cattle trailer. Like the fact that it stays out of the way when not using it. Provides good weight distribution, F150 easily handled load. 417443

Still pleased with it. Thanks.

Bryan H - 08/10/2018

by: William04/07/2018

Review from a similar B and W Turnoverball in Gooseneck

Hitch works great. I pull a 25 foot tandem dual with equipment and hay. Hitch is strong and hook up is convenient. Instructions were really close, I had only a couple minor adjustments. I installed it on an older 2000 F250 and was pleased that it went on as instructed. I used a rack to lift the truck so that was a big help. 493533

Review from a similar B and W Turnoverball in Gooseneck

Easy to install fast shipping instructions were great will definitely buy from again 516610

Review from a similar B and W Turnoverball in Gooseneck

Great product from a great company !!! Very easy to order !!! Hi quality products !!! 285786

Review from a similar B and W Turnoverball in Gooseneck

This was my Second Hitch to order from etrailer. The first was on my 2012 Ford Transit Connect. This time was on my newly purchased 2008 Ford F250 Super Duty Diesel truck. It did not have the Goosneck Hitch and I have Horses and use a Trailer to transport them. Instead of paying Much More to have the hitch put in, I elected to do it myself. I looked at the Video and read the instructions Twice before starting. Since I am almost 75, I need the help of my son. While he was at work, I did most of the work myself. When he got off work, we finished the job. I will continue to purchase from etrailer. The items fit Perfectly and instructions are Great. In the picture, is Sophie, my dog which watched as we worked. 405070

Click to Enlarge

Click to Enlarge

Review from a similar B and W Turnoverball in Gooseneck

The hitch arrived quickly after placing the order. Order status was kept up to date information was accurate When the hitch arrived - I read the instructions and the install seemed very straight forward. 3.5 hrs later. The hitch was installed along with a wire harness. The instructions were accurate and all the parts fit as expected. Very impressed with the quality of the hitch and the service provided by e-trailer 545867

Its been a year and many towing miles since the original install. The hitch is performing flawlessly. Could not be happier with this purchase

Brian - 07/25/2019

by: Patrick s08/08/2017

Review from a similar B and W Turnoverball in Gooseneck

Great service and fast shipping! 417464

by: Darren01/20/2019

Review from a similar B and W Turnoverball in Gooseneck

Was a fairly easy install in both a Ram Mega Cab 3500 and a Ford F-350. Cutting the hole in the bed was the most intimidating part, but as long as you measure just as the directions tell you, it turns out seamless. This is the only way to go if you need a gooseneck hitch! 598954

by: Dale04/01/2018

Review from a similar B and W Turnoverball in Gooseneck

Great hitch and like it. Until I used the drop in fifth wheel plate by B&W (RVK3500). There is a bolt u have tighten up to secure the hitch down. When I tightened it to 60 foot pounds it bent the main pin in the hitch. After fighting the pin to release now the pin is bent. And i cant use the gooseneck ball. And I can't remove the pin to replace it unless I remove the hitch. So long story short the gooseneck plate is good and works great as a gooseneck. But don't buy it planning to use the fifth wheel plate. Won't buy that again. 491492

After speaking with one of our contacts in the Tech Services department at B and W and was told that really the only way the ball retention pin can get bent is if its not slid fully into place when that draw-down bolt is torqued down. Please call us if you have further questions.

-- Mike L - 04/02/2018

Review from a similar B and W Turnoverball in Gooseneck

Great product. Easy to install, the installation video helped alot. It's alot better if you have two people to help. I would highly recommend this product to anyone. And is made in America, doesn't get much better than that. 277393

Review from a similar B and W Turnoverball in Gooseneck

Remove the spare tire, heat shield and drop the exhaust down or it is VERY HARD to install. Otherwise very simple and very rugged! Nice system!! 608405

Review from a similar B and W Turnoverball in Gooseneck

Installation went well. Adam was very knowledgeable and professional. 572911

by: Zack H04/14/2018

Review from a similar B and W Turnoverball in Gooseneck

I bought this about a year ago for my 2000 F250. When I received it in the mail the mail i noticed a hole in the box and the ball missing. I think this was the shippers fault and not B&W or etrailer. I emailed etrailer about the missing ball and they shipped me another ballfor free and very quickly! I was pleased with the service from etrailer. I was also very pleased with the hitch. It is the most expensive hitch at roughly $420 but I'm glad i got it. Installation was pretty easy easy and the system works great for my application. One word of advice; take the ball out if you're not using it in the winter time because the ball will freeze in there!!! Overall pleased with B&W and etrailer. Would do business with both again. 496339

Review from a similar B and W Turnoverball in Gooseneck

The E-trailer videos and instuctions are great! I would suggest going ahead and removing the spare tire heat shield to make life easier with the torque wrench and when drilling the safety chain holes. The other item I am glad I caught before installing my hitch is the size of the hole they want you to use. B&W suggest a 3-1/2" hole and provide a plastic spacer to kinda hide the gap, I didn't like the idea of how this was going to look. I still installed the plastic spacer to support the bed around the hole, but I used a 3-1/4" hole saw and very lightly filed the edges for a much better fit. (Just make sure you hit your pilot hole location.) Test fit the hitch from the top side when checking the hole size. When installing, tighten the bolts to where the hitch just starts to make contact with the frame and then go top side and check hitch/hole alignment. Tap the hitch around with a mallet if you need to line it up with the hole. (Once the hitch was tight it didn't protrude through the bed anyways, so the hole could have been small and still worked). After removing the exhaust hanger, I used a ratchet strap to pull the tail pipe towards the spring to allow access to drill the passenger side safety hook holes. Another tip, I used a piece of rope tied to the ball retaining pin and fed it up through the hole in the bed. My 11 year old son was able to hold it in place this way while I started the bolts. I am happy with the end results and it looks great! The one thing I feel could be better is how far the ball retaining pin protrudes into the second side of the hitch housing, on mine I only have about 1/4" into the second side. I would feel better with 3/8"-1/2" engagement. 302603

Working out great. Many a mile with trailer in tow.

Lee W - 10/03/2017

Review from a similar B and W Turnoverball in Gooseneck

I installed this hitch on a 2018 Chevy HD 2500 WT Duramax model. I'll first start off that etrailer is awesome to deal with. Instructions were correct with no issues. B & W makes a nice product and it is heavy duty. Having installed one of these hitches before, I already knew what to look for, so that made my life a bit easier. The other thing that made my life easier was installing it on a new truck (700 miles) haha. So, I will give a little tip to installers of this hitch. There is a cross bar that is threaded, that the center section bolts to(The rear crossbar). There is 6 pre-tapped holes. DO yourself a favor and run a tap through those holes first. B & W does not cover the holes before they powder coat the part, so inserting the bolts would be a real pain. Also, measure twice (or more) for the bed hole, you don't want to screw that up. Take the measurement from the edge of the bed where the tailgate is, NOT from the front of the bed. Other than that, everything else was good and the fit was perfect. Sorry, I don't have more pics, but I didn't think, I would be doing a review, plus I was trying to get it done. Took about 4 hours to install, including running the wiring harness kit (separate) for the gooseneck trailer. As for my nickname (Angry Johnny) I only cursed once....lol 564577

Click to Enlarge

Click to Enlarge

Click to Enlarge

Review from a similar B and W Turnoverball in Gooseneck

Great product and instructions were easy to follow. Prompt shipping and hitch delivered in secure boxes with no issues. Clean install in my Ford F-350 dually. It took about 6 hours (taking my time) doing it myself with a floor jack and the necessary tools. Could be done a lot faster with two people. Also, just cut the notch (you'll see what I'm talking about in the instructions), but not according to the measurements given. Use the cross member as a cutting guide. It will make the install a lot easier. etrailer is awesome! 403541

Review from a similar B and W Turnoverball in Gooseneck

I installed this yesterday, along with the Companion 5th Wheel Hitch. Very good instructions, well written, great illustrations. Everything fit perfectly, no struggles with alignment. Very good hardware. Looks to be very sturdily built, the welds looks great. One thing to look out for - on my 2016 Chev 3500 anyway, the exhaust is in the way of drilling the passenger side retractable chain hook holes. You will need an angle drill or drill with a flexible extension cable. Or get your steel rule out and do some serious measuring like I did and drill the holes from the top down. I drilled the accessible driver's side, then transposed those measurements to the passenger side and drilled from the top using a small drill. After hitting the hole, I used progressively larger drills until I found the edge of the 1/2" hole in the center plate, then hogged out the hole the rest of the way with a Dremel grinder. Not a big deal, just had to get a little creative. Over all, excellent experience, from the purchase, the help from customer service (fantastic people!), fast delivery and easy install. Highly recommended! 293451

Click to Enlarge

Works fantastic! Used quite a bit for work and play. No problems!

Dean S - 09/11/2017

Review from a similar B and W Turnoverball in Gooseneck

Installed this hitch in my 2017 Ram 2500 6.7 Cummins with absolutely no issues. Was very impressed with the detailed instructions. Used a friend of mine’s shop to do the work, it is definitely a two person job unless you have away to hold the hitch in place while you get the four bolts started. No specilized tools needed. I would highly recommend this to anyone that has a need for this type of hitch. Thank you George J and thank you etrailer for the grate product and price. 456487

Still working great !!! Thank You for providing a great product.

Todd - 12/03/2018

Review from a similar B and W Turnoverball in Gooseneck

I purchased the B & W turnover ball hitch from E Trailer for my 2006 Ford F250 SuperDuty. Jan in customer service was very helpful. I received the hitch within 2 days. My wife and I installed it according to the instructions and installation video on their website. E trailer really did their homework on the installation of their hitches. We got the hitch insatlled with minimal problems. All you have to do is follow the video/instuctions. I am very pleased with the hitch and would recommend ETrailer and the B&W hitch to anyone who tows. I tow a 5th wheel with a Ranch Hitch Gooseneck adapter. Now I dont have to deal with the 5th wheel hitch in the bed of my truck. I will continue to purchase other towing accessories from ETrailer. A wonderful experience. 163592

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Review from a similar B and W Turnoverball in Gooseneck

Easy installation. Excellent instructi ons 442821

Review from a similar B and W Turnoverball in Gooseneck

Been running B&W hitches since they first come out. Always a good heavy duty product and i love the fact it does not take up any bed space. Etrailer is the only place i will buy anything trailer towing Related. 569905

Review from a similar B and W Turnoverball in Gooseneck

It took me a while to get this hitch installed because there were after market airbag suspension supports that were in the way. After I removed them the installation went a bit smoother. The B&W instructions were so light, I was glad to had the opportunity to view the etrailer.com resource video and other helpful informaiton in determining the rear airbag support could be removed without causing a structural issue to the truck. So if you got these airbags install, know that they can be removed so you can take advantage of this high quality hitching system. I used impact wrenches to loosen the old and install the new bolts... made life a lot easier than with the standard wrenches, so worth the price i invested in the right tools for the job. 405136

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Review from a similar B and W Turnoverball in Gooseneck

B&W and Etrailer are a great combo. I just ordered this hitch after having a similar one in my 06 Ram. I really like the hitch. I also like that the companion fifth wheel and other B&W accessories can be used on both trucks. I just installed last night and by myself it took about 5 hours. Watch the video and read the instructions. Take your time and do the prep work to get ready for install. I didn’t remove the rear muffler portion and still had plenty of room. I did have a ceiling lift that helps center and lift the hitch portion through the hole. If you don’t have that make sure you have help. Fit as expected with minimal issue. I did not trim the wheel well plastic but may so the handle isn’t hidden. I installed hitch then replaced plastic bedliner and drilled hole through hitch opening from underneath. I also drilled the u-bolt holes with bedliner in and they fit perfectly between the rises. 498168

Review from a similar B and W Turnoverball in Gooseneck

Very easy to install, used a support strap to support the center section as suggested during installation. All bolts and related hardware fit great. Would recommend that you have a 1/2" drive 3/4" swivel socket and 1/2"extensions to make installation easier. 558609

Review from a similar B and W Turnoverball in Gooseneck

3 stars... Well the install was a bear!! There is a bolt no one tells you about right behind the locking pin you can not get to with a torque wrench. Also taking off the rear tires will make it easier to torque the outside plates to the frame. Other then that the directions were spot on and it looks great. Im just using this set up to use the B&W Companion sliding 5th wheel hitch. 672593

Review from a similar B and W Turnoverball in Gooseneck

Quality product. Install is relatively easy with the exception of the safety chain holes. It's pretty impossible to maneuver a drill from underneath with the exhaust pipe in the way. Before installing, I made a plywood template of the 4 inch hole and safety chain holes. I was then able to drill the holes from the bed. It made it easy. 364613

Review from a similar B and W Turnoverball in Gooseneck

hitch was just perfect 339777

we have purchased 3 of these hitches from you and I wouldnt buy any other, they work great

mark c - 02/08/2018

Review from a similar B and W Turnoverball in Gooseneck

How good is free shipping, our Order was placed about 8pm est on Thursday Jan 19th, and arrived Jan 25th before I returned from work at 4pm. Just sold the F-150 I installed the previous B&W fifth wheel hide a ball hitch in. Love this hitch set up, after arriving at a campground and unhooking the camper I have FULL use of the truck bed. Install of round two begins in the morning, directions are simple and easy to understand. George J from E-trailer has been keeping me updated with information about my delivery status and made himself available had I had any questions. Wife and I have been camping for about four years, on our second RV and now our third truck and have been totally satisfied ordering everything we needed from E-trailer over that time, (about 18-20 orders to date) adding to the great products E-trailer provides is the HOW TO DIY videos on many products. 335458

Review from a similar B and W Turnoverball in Gooseneck

Bought the B&W gooseneck hitch for 2017 Ford F-350 dually and it fit perfect. Great product!!! 333575

Review from a similar B and W Turnoverball in Gooseneck

Had similar hitch in my Dodge 2500 for towing a 3-horse horse trailer. I liked it so when I decided to put a gooseneck hitch in my 2002 Ford F250 Super Duty 4WD I went with B&W again. I have used etrailer before; liked their support and could't find a better deal. Installation instructions were clear and an online video of installation on a 2003 Ford was much like mine. Gave me all the confidence I needed for a DIY install. I my case I didn't have a rack which would have made life easier. I had all the tools and did the job without needing to cut the bed ridge and without removing the rear tires or dropping the spare (couldn't find the $#@! jack handle that fits the mechanism). It took about 3 hours. With a rack and no tires it'd get done in under 2 hours for sure. 544034

by: Donald10/20/2018

Review from a similar B and W Turnoverball in Gooseneck

We use our hitch on a gooseneck trailer pulled by an F250. The hitch is freaking perfect. No problems at all. 576006

Review from a similar B and W Turnoverball in Gooseneck

You guys rock! Sal helped me choose through correct unit for my truck. Shipping was fast, received it in 3 days. Will be installing it after the holidays are over. Etrailer is the best company that I have come across for out Truck and trailer needs. They are my first call when I need something. Thanks again. Happy New Year 329043