Customers compare GY36FR to these similar products
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. Manual latch allows for simple hookup. 5.5K pin weight.
Features:
Specs:
Notes:
Calculated Tongue Weight | Executive Tongue Weight Capacity Required |
---|---|
1,600-2,599 lbs | 3,500 lbs |
2,600-3,599 lbs | 4,500 lbs |
3,600-4,599 lbs | 5,500 lbs |
4,600-5,599 lbs | 6,500 lbs |
5,600-6,599 lbs | 7,500 lbs |
6,600-7,599 lbs | 8,500 lbs |
7,600-8,599 lbs | 9,500 lbs |
Say your truck has a gooseneck hitch for towing your horse trailer, but you want to go camping with your new fifth wheel. You could outfit your truck with a new fifth-wheel hitch that attaches to your existing gooseneck hitch, but that means having to move a heavy, bulky hitch into and out of your truck bed all the time.
You could also purchase an adapter that bolts onto your trailer's existing pin box. But adding a new component to your setup can keep your pin box from working how it was designed. King pin adapters can create a stiff ride and can even strain your fifth wheel's frame by adding too much height at the connection point.
A better option is to use this gooseneck-compatible pin box to easily tow your fifth-wheel trailer with your truck's gooseneck hitch. The box replaces your trailer's existing pin box, which means it's designed to act as a part of your trailer instead of simply bolting over your king pin like an adapter does.
If you've ever towed a fifth-wheel trailer before, you're no stranger to road shock. Driving over uneven terrain can result in a rigid, bumpy ride. And uncomfortable fore-and-aft chucking can occur when you're starting and stopping. When all of the motions combine, the road shock can even potentially damage your truck or trailer.
This Gen-Y Hitch torsion pin box is designed to absorb road shock at the connection point to create a safe, smooth ride. This is thanks to the internal construction of the box, which is similar to that of a torsion axle.
Pivot points are built into the Gen-Y pin box adapter. This allows for movement between the box, which attaches to your trailer, and the coupler tube, which connects to the gooseneck hitch ball in your truck bed. When your trailer bounces or jerks, the coupler tube will move accordingly.
Built into the Gen-Y pin box are tubes with inner bars that are surrounded by rubber cords. As the coupler end moves, these inner bars twist inside of the tubes, attempting to follow the coupler's motion. But the rubber cords prevent the bars from twisting too far. And as each bar turns, these cords compress to absorb the rough shock. This means that any shock experienced by your truck can be absorbed before it reaches your trailer, and the shock experienced by your trailer won't get transferred to your truck.
The vertical load, or pin weight, refers to the weight that a fully loaded trailer exerts downward on the hitch ball in the truck bed. Too little vertical load can cause trailer sway and too much can cause poor performance.
This Gen-Y pin box has a built-in scale so that you can check to see if your vertical load is too high or too low. The red section on the top of the scale indicates your maximum vertical load (5,500 lbs). The red section on the bottom of the scale indicates no vertical load (0 lbs). For the built-in shock absorption to function effectively, the scale's white indicator marker should be within the green section when you hook up your trailer to tow.
Average Customer Rating: 4.7 out of 5 stars (212 Customer Reviews)
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. Manual latch allows for simple hookup. 5.5K pin weight.
The Gen-Y gooseneck has been excellent! I now have approximately 12k miles on mine and it rides very nicely with very limited chucking and handles rough roads very well. I’d highly recommend that you contact Gen-Y BEFORE ordering to ensure you get the correct load rating product. Gen-Y and Etrailer have provided excellent customer and tech support! This product definitely frees up your truck bed and does require a precise line up to hitch.
I love this hitch I put it on my 35’ Astoria fifth wheel it pulls great and the shock absorbers help with a smooth ride.we took a ten day trip from Ga to Maine last September and had no problems with this hitch. I guess the only negative is that it’s not as easy as a regular fifth wheel hitch to hook up by yourself but after a few times you can line it up ok. The best thing is that no big hitch taking up space in my truck bed just a ball
Makes life a lot easier l don’t have to remove my hitch from the bed of my truck to use it. Just flip the ball and there you go.
The gooseneck hitch actually pulls better than the 5th wheel hitch I had.
It is rather heavy so come up with a good plan for installing, I used the front end loader on my tractor which allowed me to do the install by myself.
Great product!!!
This product is a chucking ENHANCER, not a chucking dampener. Additionally, despite what you have read, my experience with GenY customer service has been terrible. GenY will not support their warranty program, they will try to tell you everything is OK, when the fact is, their product is faulty and does not function to GenY product literature statements “Built-In Suspension Creates Up to 90% Smoother Ride”.
I purchased the GenY executive hitch from eTrailer on 3/10/23, etrailer sent the wrong unit and to etrailer’s credit - they quickly took responsibility and replaced with the correct unit on 3/24/23. I installed on my DRV Elite Suites PS3 just in time to attend the SOITC rally at the Outer Banks on 4/13/23. When we left for this 750-mile one-way trip, the GenY load indicator was in the middle of the green zone, I measured the pin load at 5,200 pounds. Bedrail clearance was my reason for buying the GenY, it replaced a Trail Air on my DRV and a Reese 27,000-pound hitch on my 2022 F450. Bottom line, the GenY system provided no improvement in bedrail clearance, but did offer the ability to switch in different gooseneck balls to adjust for bedrail clearance.
GenY states that a 1,000-mile break in period is required before the GenY torsion system is fully effective. My experience was that at 750 miles the torsion system on the GenY had sagged to it lowest point with the load indicator in the unit outside of the green, this also resulted in losing nearly two inches of bedrail clearance. It looks like it has a metal-to-metal stop so that the lowest the indicator will go is to the white lines outside of the green. I called GenY from the RV park and was told that the unit would not sag further. I purchased a Curt gooseneck ball which was 2 inches higher than the Ford ball to regain bedrail clearance having to rapid ship it to the RV park.
Chucking became downright scary on the 750-trip home. As an example, chucking was induced every time my truck’s ten-speed transmission shifted up. Upon arrival home, I again contacted GenY customer service with a full expectation that GenY would replace the unit. Instead, here is their response: “I spoke with our QC Manager regarding your hitch. He said that you are in the correct unit and being at the top end of the green is normal after the break-in miles. As for the bedrail clearance he said that you would be able to lower the pin box down a set of bolts (with our pin boxes you are only required a minimum of 4 grade eight bolts per side) or use a B&W ball as they are roughly 1 1/2” taller.” This is unacceptable...
Quality build, easy install, let your truck and trailer do the heavy lifting. My wife and I did this install and took about an hour to get it bolted. I also bought the Grade 8 bolt kit. I’m hauling 20K GTW. The original hitch had Grade 5 bolts and only 5 per side. Now I have 6 per side, 160ft.lb. on bolt torque
This was the perfect replacement for my 5th wheel king pin. It was easy to install and has a much smoother ride! I would definitely purchase this again!
Because of my bad back I replaced my B&W Companion hitch & Lippert Rota Flex hitch pin which I loved using. There is a learning curve with hitching a gooseneck trailer but with some reflective tape on the center line above the coupler on the gooseneck and a telescoping yellow ball hitching aid with a magnetic base on the truck bed just in front of the ball. This hitch setup is softer and smoother towing than my old setup and I have about 5k miles of use.
The toy hauler pulls so much smoother. I wasn’t expecting to increase my MPG but, I gained a 1/2 mile per gallon. Dealing with etrailer was great as usual.
The Gen-Y hitch is very stout & well built. Fit & finish was excellent.
Installed myself in about 30 minutes.
Just received today after I tracked the whereabouts with not-so-accurate UPS LTL FREIGHT tracking. I difficulty located local freight company that just received this terribly torn up cardboard package with this 205# parcel. Hitch had been placed onto some pallet enroute because it was no longer contained in its GEN Y box. Extent of damage I’ve yet to determine though it has a long and deep gash into the powder coat finish down the exposed side.
2023 Heartland Bighorn 3970FB. Replacing factory Roto-Flex and Anderson Ultimate. The GY66FR packaging was perfect upon delivery. Packaged really well with spray foam around unit.
Removal and installation time was around 1 ½ alone with use of my front end loader. This unit is robust to say the least. Fit and finish is perfect, it bolts right into place.
Glad to have the bed of the truck my truck back. From measuring looks like this will help us with our turning clearance as well.
Will update as we put some mile on this Gen-Y
I’m really happy with my purchase. Please take into account that this hitch is 2-3” shorter than the kingpin box. They do make an extended version. I had to buy a 4” ball offset, as I couldn’t open my tailgate Without hitting the camper. I love having the open bed space, it seems to be smoother and it’s less noisy then the pin box.
Seems great just installed hook camper up and took around town pulled great with new hitch
Space saver, back saver, pulls great. The thing saves so much space in your bed, gives so much room while pulling. It saves your back because no more putting the giant heavy fifth wheel hitch in and out of the bed. It pulls great too, pulling my 42' would buy it again for any trailer. Much more solid that the adapters sold.
Works very well. There’s a lot less chucking. I don’t regret buying it. I installed myself. I built a wooden pin box, backed my truck under the pin and lowered the trailer to rest on the wooden box. Braced the back end with 2x4’s and removed the bolts. Reinstalled with the same method. The hardest part was lifting pin boxes in and out of the truck.
Installation was very straight forward, it is heavy so you need something to prop it up for you while you get at least one bolt started in each side. I used the bucket on my tractor to hold it up. I only have one tow in so far for about 50 miles so still early to review. It certainly works as advertised for taking out a lot of the trailer feedback on rough roads, uneven transitions, etc. It is an improvement in ride quality and makes towing a big fifth wheel more comfortable. Necessary? Probably not but it does spoil you a little bit. One problem though that Gen-Y is working on fixing is the ball to pinbox is a little bit longer and I did hit the bed cap at about 60 deg of turn while backing in at an angle. It cleared when I tested it in the flat driveway, but not by much. They are going to come up with a fix. I'm at 7 1/2" clearance from the overhang to the bed caps sitting flat. This is with a '18 Chev Silverado HD 8' bed and a '19 Momentum 351M
The box for the hitch was absolutely destroyed, the hitch has damage to the powder coat on most sides. Almost no packaging in the box, not sure how you guys pack these but this $[XX] hitch is beat up pretty bad. Really disappointed and i don't have time to had it repowder coated as i am picking up the new camper tomorrow with this hitch and now this one is going to rust.
Haven't got to use it since it took over a month to get it and I had to completely change up everything and borrow a hitch from my brother to make this trip possible. You also failed to send the safety chains I bought!!!!!
The hitch itself works great! Easy to hook and unhook. The only downside to it, as with all gooseneck hitches, is getting into the bed to hook and unhook chains. Adding the hitch and airbags on my truck has defiantly smoothed the ride on the whoopy woops on the road.
I installed it pretty quickly probably an hour or two minimal help from my wife. It pulls good I think it’s a vast improvement over the turning point hitch but I haven’t yet and put very many miles on it.
The pinbox is great. My only suggestion is to order one size larger than you think you need. The shock absorbers on my hitch is maxed out so it is not utilizing all its capabilities.
Allows me to tow my 17000 lb camper better and easier than towing my 10000 lb trailer. Removes the jerking between truck and trailer just like they say.
Do you have a question about this Gooseneck and Fifth Wheel Adapter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.