bing tracking image
  1. Front Receiver Hitch
  2. Toyota
  3. Tundra
  4. 2010
  5. Draw-Tite
FITS 2010 Toyota Tundra
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Our Price: $192.53
You Save: $147.39
Front Receiver Hitch
Confirmed to Fit
2010 Toyota Tundra

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 28 lbs
65080 - Square Tube Draw-Tite Front Receiver Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call at 1-636-306-4830 for expert service. We are your Toyota front receiver hitch experts, and offer a great price. carries a complete line of Draw-Tite products for your Toyota Tundra 2010. Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" part 65080 from Draw-Tite can be ordered online at Complete front receiver hitch installation instructions and technical support.
  • All Info
  • Reviews (98)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Front Receiver Hitch

  • Front Mount Hitch
  • Draw-Tite
  • Custom Fit Hitch
  • 2 Inch Hitch
  • Square Tube

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers, and more.


  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier, and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit for your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design


  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

65080 Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Item # 65080

Installation Details 65080 Installation instructions

Front Mount Capacity
Line Pull:
9,000 lbs.
500Vertical Load:
# 500 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

Skid shield, if present, will be removed to create a four inch hole for oil filter access, and reattached, or may be left off. No drilling required for installation

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 65080

Average Customer Rating:  4.7 out of 5 stars   (98 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers, and more.

2019 ToyotaTundra

These is an excellent hitch at an excellent price. The install was easy and all the hardware that is needed is in the box. I chose the Drawtite over the Curt because the receiver end is a little longer. It' not even noticeable on the truck. I have a snow plow that attaches to the hitch. The Toyota cap shown in the picture was not included. The Tundra is a 2020 so I can confirm if fits.

Hitch has been working as expected. After one year it still looks as good as when I installed it. They use alot of road salt where I live but the hitch has no rust on it.
Davie R - 12/24/2020


Installation wasn't very difficult. I was very happy to add a hitch to the front of my truck. I installed to be able to put a hitch mounted winch or bike rack. The pictures others have posted how it sits on the truck. I found that it sits to far back from the bumper for my needs. Everything I need to attach needs and extension to clear the bumper. I wouldn't repurchase and install if I knew. The hitch itself is manufactured well and works as expected for a bolt on application.

Thank you for reaching out! I wanted to recommend a hitch extender. I attached a link to our products and there are varying lengths to choose from depending on your needs.
-- Etrailer Expert Brooke M - 04/25/2022


We use this with an aluminum rack to haul a Honda 150cc scooter when we go camping. The only negative is how low it is -- ended up buying a 2" riser/extension which made it much more functional. Not really the fault of the hitch, just the reality of the mounting points. If you end up needing a riser make sure you get one with the proper weight rating as some are just made for lightweight bicycle racks.

2021 ToyotaTundra

Exactly what I needed for my fishing rod rack


I added the etrailed motorcycle carrier and now I carry my 250cc motorcycle with this set up and it works just fine.

Great. It is exactly what I wanted for my 08 Tundra. Easy to install, even for an old man.
Dennis - 03/20/2022


The product, the packaging and delivery, the instructions were all near perfect. You must torque the bolts, so make sure you have the tool. This hutch really saved us getting our trailer into/out of the narrow side yard. On my Tundra it means some the skid plate bolts are now hidden, so I made a door in it to allow oil filter access.

2021 Ram 2500


Still works good as usual
Kenneth - 10/21/2022


We have a truck camper, and needed more room for our camping equipment. Purchased this front hitch from etrailer, and it has been awesome. Have used it to carry our generator, and bought a cargo tray that we use also. Love it! Thanks!


Yes , my 2019 tundra is beach ready and the fishing rods are not broken.... with the front hitch and rod cooler on the front the 4x4 on the beach is that much easier. Yes 3 friends are looking at doing the same setup. I added a flag to remind me there is 3 extra feet in front of the truck when the rods are not in the holders.

2023 ToyotaTundra

Did not fit my my year of tundra. Website and sales person stated it did. Will have to return.

What model year is your Tundra? The hitch is designed as a fit for 2007-2021 model year Tundras.
-- Etrailer Expert Mike L - 09/21/2022


I use it all year in winter months my bear plow is in it and summer season I use it for a bike rack and extra cargo carrier.

2021 ToyotaTundra

Easy install on a 2021 Tundra and seems like it will do the job. The bolts were long enough to accomodate an aftermarket skid plate. But the crooked and haphazardly affixed etrailer sticker was an immediate no. The Tundra receiver plug in the photo was not included.

I apologize for the sticker placement. I believe the Tundra hitch cover you are referring to is on a customers photo of their install. This is not included in the hitch receiver purchase.
-- Etrailer Expert Sierra K - 11/09/2021


Hitch worked perfect and thanks for the instructions . My only regret is that I didn't think about drilling a hole in the skid plate myself for changing the oil filter ha! Again thanks hitch work perfect and looks good !


It does exactly what I need it to do. Great addition to my 2011 Tundra


Excelent Equietment


Works just as I had hoped. Easy to install, looks good on vehicle. I use it mainly to hold a rod and cooler rack on my Tundra. The bolt and bracket keeps
it from rattling. High quality, good price.


Arrived on time. Front hitch fits perfectly. Should serve its purpose just fine.

2019 ToyotaTundra

Order came in on time, nicely packaged but could have been packaged tighter to prevent it from moving inside the box and parts showing outside the box.

2016 ToyotaTundra

Well built product, all hardware included, perfect fit, flawless transaction


Well made and fits perfectly.


bolted right up and I was able to install it by myself. I trimmed the plastic chin guard to fit and it looks good on the truck.


I was sent an item that has scratches and chips in the paint which need to be addressed to avoid rust as some already are showing rust signs. Even the darn stickers were applied with no thought as they are really crooked. Product also real dusty for something allegedly made in 5/21. If this were purchased from a brick and mortar store I would have returned it immediately. As it stands I have no time to deal with internet returns.

Thank you for bringing this to our attention. Our customer service team should be reaching out to you in the near future.
-- Etrailer Expert Brooke M - 09/03/2021

2018 ToyotaTundra

I'm unable to give a review because It's not on my truck yet!


The hitch is of very good quality and was easy to install, all necessary hardware was included.
The only negative thing I have to say is about the installation diagram. Where it shows to cut a hole in the skid plate for oil filter removal is in the wrong place . It is not towards the center of the skidplate but to the right of where the instruction show it

This hitch has been very good I use it for several different thing from parking the RV in tight places to hauling coolers to and from the deer lease
Ricky - 06/05/2021

2012 ToyotaTundra

Hitch was delivered to my house in excellent condition. Box was not damaged at all. The hitch fits perfectly on the front of my Toyota Tundra and is well built. Will work great for all the accessories you want to hook up to it.

Show More Reviews

See what our Experts say about this Draw-Tite Front Receiver Hitch

  • Will Front Mount Trailer Hitch # 65080 Fit a 2008 Toyota Tundra TRD with Off Road Package
    The Draw-Tite front mount hitch # 65080 is listed as fitting all styles of the 2008 Toyota Tundra. I have included a link to the installation instructions for you to view. The hitch has a 500 pound vertical load capacity but you need to determine the capacity of the front axle to know if you can add a carrier and bike to the the front of the truck. Front mount hitches are made more for winching applications where there is not as much vertical load.
    view full answer...
  • Do I Lose The Tow Hooks When Installing Draw Tite Front Mount Hitch # 65080 on a 2012 Toyota Tundra
    Good news! You will not have to sacrifice your tow hooks on your 2012 Toyota Tundra when installing the Draw-Tite Front Mount Hitch # 65080. The installation instructions are attached, and the very first step is to remove the hooks, but, keep them to reinstall later. Just a side note is that if your Tundra has a front skid shield it will need to be removed so you will have access to your engine oil filter.
    view full answer...
  • Front Mount Trailer Hitch for a 2014 Toyota Tundra SR5 with Off Road Package
    I checked with Draw-Tite and front mount hitch # 65080 is listed as a fit for all models of the 2014 Toyota Tundra. I have included a link to the installation instructions for you. Prior to installing the hitch and plow, make sure to check the front axle weight rating to make sure it can be used with a plow. The hitch itself is rated for 500 pounds vertical load and a maximum of 9,000 pounds straight line pull (if using a winch).
    view full answer...
  • How Does a Bolt Leader/Fishwire Work when Installing a Front Mount Receiver on a 2008 Toyota Tundra
    I have included links to a video that, in part, shows how to fishwire hardware when installing a hitch and to our help article with installation tips. Basically, you will run the fishwire through the hole that you will be using with the spring-looking end going in first. Pull it out through another access hole. Slide the block spacer on first. Thread the hardware to the spring end and then pull the other end of the fishwire back through the first hole so that the threaded part of the...
    view full answer...
  • Does Skid Plate of 2016 Toyota Tundra Need to be Modified to Install Front Hitch
    There is a 4 inch diameter hole that needs to be cut in the skid shield of your 2016 Toyota Tundra to be able to install the Draw Tite front hitch part # 65080 that you referenced. I attached a diagram that shows where it will be.
    view full answer...
    Image 1 for
  • Will the Front Mount Trailer Hitch for a 2007 Toyota Tundra Work with a Bull Bar/Brush Guard
    In order to install a front mount trailer hitch on a 2007 Toyota Tundra like the Draw-Tite Front Mount Trailer Hitch Receiver part # 65080 which is what I recommend you'll need to remove any existing bush guard or bull bar. The reason for this is because the two almost always use the same mounting holes for installation. That said, this is the case for almost every vehicle not just a Toyota Tundra. The front mount trailer hitch is going to be much more functional than a bull bar or brush...
    view full answer...
  • Can Skid Shield of 2020 Toyota Tundra be Retained and Install Front Hitch
    To retain the skid plate of your 2020 Toyota Tundra TRD when installing the Draw Tite # 65080 you will need to cut a 4 inch hole in the skid plate so you can access the oil filter. See attached picture.
    view full answer...
    Image 1 for
  • Do Tow Hooks Remain When Installing Draw-Tite Front Mount Hitch on 2020 Toyota Tundra
    Starting with the tow hooks, those will remain on your 2020 Toyota Tundra when installing the Draw-Tite Front Mount Trailer Hitch Receiver # 65080. They will be temporarily removed, but will be bolted back on. In regards to the hole, there is a small hole you will need to enlarge in the skid shield to allow for access to the oil filter. And as for how much hangs down, it will be the crosstube of the hitch. I have added a photo a customer sent in of this hitch installed on their 2020...
    view full answer...
    Image 1 for
  • Can Front Hitch Fit with Push Bar on 2011 Toyota Tundra
    I wish I could say yes but front hitches and push bars/grille guards install in the same area and to the same part of the truck so you'd have to pick between the hitch like the # 65080 and the bar.
    view full answer...
  • Will the Draw-Tite Front Mount Hitch 65080 Fit a Tundra TRD With a Skid Plate?
    From what I could find, the skid plate on your 2020 Tundra will need to be removed to create a four inch hole for oil filter access, and then either reattached or it may be left off. I included a picture from the instructions that shows where to cut the hole if you decide to reinstall it as well.
    view full answer...
    Image 1 for
  • Painting a Front Mounted Hitch thats Been Powder Coated on a 2018 Toyota Tundra
    The Draw-Tite Front Mount Trailer Hitch Receiver item # 65080 that fits your 2018 Toyota Tundra has been powder coated and covered with an e-coat base for rust protection. You are going to have to get through all of that to get whatever coat of paint on you want to add. You can just scuff the powder coat and paint over it.
    view full answer...
  • Recommended Front Mount Trailer Hitch for 2008 Toyota Tundra
    The Draw-Tite Front Mount Trailer Hitch Receiver part # 65080 is what I recommend for a 2008 Toyota Tundra. It offers a bolt-on fit with no drilling required for installation. It fits both 4x4 and 4x2 models. It will work great for winches, bike racks, snow plows, and many more. It has a 500 lb vertical load rating and 9,000 lb line pull. Please note, the skid shield will need to be removed or modified for re-installation.
    view full answer...
  • Size Of Front Hitch Receiver Opening For 2011 Toyota Tundra
    The front hitch that is confirmed as a fit for your 2011 Toyota Tundra is the Draw-Tite Front Mount Trailer Hitch Receiver, part # 65080. This hitch does have a 2 inch receiver opening and is not available in a 3 inch version. This hitch has an easy bolt-on installation and requires no welding or drilling. If you have the front skid plate on your Tundra, it may have to be removed to install this hitch. Typically, the shanks of any bike carriers we offer fit either 1-1/4 inch or 2 inch....
    view full answer...
  • Will Front Mounted Receiver Hitch on 2013 Toyota Tundra Need to Be Removed to Change Oil
    Neither the Draw-Tite # 65080 nor the Curt # 31198 would in themselves prevent you from changing the oil in your truck. What they will do is prevent you from removing the skid shield, which will block access to the oil filter. You can remove the skid shield entirely and leave it off permanently, or you can cut a 4-5 inch diameter access hole through the skid shield in the area directly under the oil filter. Because the hitch attachment hardware is meant as a one-time use item, we don't...
    view full answer...
  • Comparison of Curt and Draw-Tite Front Mount Trailer Hitch Receviers for 2008 Toyota Tundra
    We have two front mount hitches that are confirmed to fit your 2008 Toyota Tundra. The Curt 31198 and the Draw-Tite # 65080. They do have identical specs since they both have a 9,000 pound line pull and 500 pound vertical load. Both have a 2 inch recevier opening. Both bolt to your Tundra's frame and do not require any drilling. The largest difference is going to be the appearance once either is installed. The receiver tube of the Draw-Tite protrudes further forward than the Curt...
    view full answer...
  • Front Mount Hitch Receiver and Oil Changes for a 2012 Toyota Tundra
    Customers have stated that in order to change the oil on a 2012 Toyota Tundra with front mount hitch # 31198 installed they have had to either leave off the skid plate or modify it to avoid having to take it and the hitch off every time the oil needs to be changed. The other front receiver option that fits your truck, # 65080, requires removal of the skid plate so it would not be an issue unless you wanted to keep the ski plate..
    view full answer...
  • Comparing Curt and Draw-tite Front Hitch for 2019 Toyota Tundra
    The biggest difference between the Curt front hitch part # 31198 and Draw-tite front hitch part # 65080 is that the Draw-tite receiver tube extends out more than the Curt by over an inch. This makes it more visible when nothing is mounted to it. However, it can also help with clearance. When putting an accessory in the hitch there is less of a chance of it coming in contact with the front of your Tundra. Other than that, they aren't much different from each other. They have the same...
    view full answer...
  • Comparing Front Mounted Hitch Receiver for 2008 Toyota Tundra
    The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65080 is my recommendation for you based on cost and features. The installation of this hitch is nearly identical to the Curt # 31198. The Draw-Tite has a measurement of 7-1/2 inches from the crossbar to the end of the receiver tube. The Curt receiver has a measurement of 4-5/8 inches from the crossbar to the end of the receiver tube. The weight ratings of the hitches are identical, so the 2-7/8 inch difference in...
    view full answer...
  • Recommended Front Mount Hitch for 2015 Toyota Tundra
    The two front mount hitches available that are confirmed to fit your 2015 Toyota Tundra, the Draw-Tite # 65080 and the Curt # 31198, are extremely similar to each other and differ only in their slight design variation. Both hitches will provide a 2 inch receiver opening with a 500 vertical load maximum and 9,000 pound line pull capacity. The only real difference between the two models is that the Draw-Tite # 65080 has a receiver tube that protrudes a bit further forward than the Curt....
    view full answer...
  • Comparing Curt and Draw Tite Front Hitches for 2018 Toyota Tundra
    For your 2018 Toyota Tundra we have the Curt front hitch part # 31198 and the Draw Tite part # 65080 both as a confirmed fit and both really good options. Both install the exact same and have same capacities, but I like the Curt better as it's made in the USA and the Draw Tite is not. I attached a picture that shows the hitch installed for you to check out as well.
    view full answer...
    Image 1 for
  • Recommended Front Hitch for 2018 Toyota Tundra
    The Curt Front Mount Hitch # 31198 and the Draw-Tite # 65080 for your 2018 Toyota Tundra are indeed just about identical in terms of their capacities and where they will mount on the truck. One thing that does differentiate the two models, and the reason I recommend the Curt, is the fact that the Curt # 31198 is made right here in the USA while the Draw-Tite hitch is made overseas. The Curt hitches are also known for their unique powder coat application which ensures a rust free hitch...
    view full answer...
    Image 1 for
  • Front Mount Hitch Options For 2018 Toyota Tundra
    I believe you are asking for a front mount hitch for the 2018 Toyota Tundra. There are two options, Curt Front Mount Trailer Hitch Receiver part # 31198 and Draw-Tite Front Mount Trailer Hitch Receiver part # 65080. Both options install the same, have a 9,000 lb line pull weight capacity and a 500 lb vertical force weight capacity (downward force). I recommend the Curt because it is assembled in the USA.
    view full answer...
  • Will The Front Mount Hitch for a 2019 Toyota Tundra Work With TRD Package
    The front mount trailer hitch options for a 2019 Toyota Tundra, the Curt Front Mount Trailer Hitch Receiver part # 31198 or Draw-Tite Front Mount Trailer Hitch Receiver part # 65080 will both work of TRD models. That said, you will either need to cut a 4" hole into the skid shield so you can access the oil filter or leave the skid shield off completely but that's up to you.
    view full answer...
  • Distance From Hitch Tube To Receiver of Draw-Tite Front Mount Hitch For 2020 Toyota Tundra
    I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following: - Draw-Tite Front Mount Trailer Hitch Receiver # 65080 The hitch is similar to the Curt # 31198 in that it measures 3-5/8 inches from the hitch pin hole to the front of the crosstube, and 6 inches from the crosstube to the front of the hitch. We haven't had a chance to install either hitch on a Tundra, but I did add some photos for you that...
    view full answer...
    Image 1 for Image 2 for

< Previous

Do you have a question about this Front Receiver Hitch?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate front receiver hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C
Employee Conner L
Test Fit:
Conner L
Employee Thomas T
Video by:
Thomas T

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-636-306-4830