To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Finding it tricky to maintain your vehicle's sleek aesthetics while adding a hitch? The EcoHitch Hidden Front Mount Trailer Hitch Receiver provides an unobtrusive solution. The hidden cross tube ensures that only the receiver is visible, maintaining your vehicle's factory look without the need for major modifications. Perfect for those who refuse to compromise style for functionality.
Looking for an environmentally friendly yet robust hitch? The EcoHitch uses a unique metal alloy composed of recycled aerospace-grade aluminum, steel, and stainless steel. This sturdy and eco-friendly construction minimizes the carbon footprint while offering resistance against rust and environmental wear - ideal for eco-conscious adventurers.
Need more utility from your vehicle's front end? This custom-fit, front-mount hitch is your go-to solution for attaching winches, snow plows, cargo carriers, and more. With a 2-inch receiver opening, it supports a variety of hitch-mounted accessories, so whether you're navigating snow or carrying extra gear, this hitch has you covered.
Worried about handling heavy loads? Fear not, as this hitch is engineered to deliver with a 10,000 lbs gross trailer weight capacity and a vertical load of 1,000 lbs. It empowers you to tackle demanding tasks, making it suitable for winching, hauling, and towing with confidence.
Fed up with complex installations? With the EcoHitch, installation is a breeze, requiring no drilling or welding. Its straightforward, bolt-on design means you can get it up and running quickly, whether you're a seasoned DIYer or a first-time installer.
Concerned about long-term durability? The EcoHitch is tested with Finite Element Analysis (FEA), pinpointing stress areas to ensure compliance with SAE J684 standards. This rigorous testing gives you peace of mind that your hitch is built for endurance, maintaining durability on every adventure.
Tech Tip
No drilling through vehicle frame required for installation , Front plastic panel will be temporarily removed for installation , Hitch includes a front license plate bracket which installs in the hitch receiver opening when not in use
California residents: click here
This is the second front hitch receiver I have installed from Etrailer, and I am just as impressed with this purchase, as I was with the previous one.
One thing to note: the product states is not compatible with the brush guards, and that is not accurate. It was very troublesome to lineup both the brush guard supports, and the receiver supports with the frame. But it is doable with patience, an extra set of hands, and colorful use of the adult language. (installation w/o a brush guard was a cake walk)
I had my previous front hitch on an F150 for 5 years, and have had this one on my current F250 for a little over a year. They hold up very well, provide versatility to haul loads on the front of the truck, so you can fully utilize the bed, or tow a full trailer. This is now the first modification I suggest to new truck owners.
Let me start by saying this is not the first front receiver I've purchased from etrailer all my trucks get front receivers for winches. This time though the box shows up on time but the corner is blown open and the receiver is hanging out. Also the bag of bolts has been ripped open and half the bolts are loose in the open box but to my surprise after counting everything, they were all there.spray foam packing would have mitigated all that. Moving on. Went to install the receiver and the end mounting plates are 1/4 inch too tight. Won't fit the frame rails. Had to spread each side 1/8 out with a Hydraulic bottle jack. Apparently using a jig during the manufacturing process is optional these days. After all that I finally got it to fit good. It looks good and the welds seem adequate. I think it could have been installed in an hour by myself if not for having to "adjust" it but was still done in under 2 hours.
Stephen J. 
7/30/2024
A year later. Still love it. Has a 13k winch mounted on it I use regularly and with the addition of snatch blocks Im sure Ive well exceed the rated pull for the hitch but have yet to damage it. Just get one already, you cant go wrong
I don't know if my frame is wider for a reason, but this installation required 2 bottle Jack's and a floor jack in the middle. It was a very tight fit! That said, it worked great with my ranch hand brush guard and the mounting hardware all worked even though they use the same mounting points. I'm excited to start using it for winching and for a wheel-less trailer.
Awesome piece of equipment. Install went just as the video showed. Will be carrying ebike rack which are heavy, and this hitch can handle it. Carrying bikes while towing is the reason for the added hitch. The tightness of the hitch to the frame was solved with a few taps of a sledge hammer, went right in afterwards. Definitely is a 2person job, however I did it by myself and a floor jack. Be patient and be prepared to move around on the ground back and forth. A good magnetic light helps to see to line up bolt holes. Go easy with the fish wires while taking bolts off ! I had to retwist the wires with needle nose pliers because I pulled them off ! Follow instructions and you can do it with patience at critical times !
This is exactly the product I needed to extend the hitch on my tent trailer. Now I can open the tailgate without unhitching the trailer.
Dan
10/28/2024
I could not be happier with this product- its THE ticket for me.
2016 F250 crew cab 4x4 diesel, fit is perfect and all clearances were great, within 1/4”. No modifications needed but the tight fit meant I needed to use a jack for final fitment. Very happy with the results and is exactly what I needed. Thanks!
Mounted the EcoHitch hidden front mount trailer hitch on 2011 Ford F 250 with a Ranch Hand Grill Guard. The Ranch Hand uses two of the same holes as the EcoHitch's four mounting holes. Getting the pieces lined up is a bit of a challeng although no modifacations were necessary.If I have the need to do it again I would let an installation shop do it. etrailer's customer service and commuication are excellent, shipping time and delivery were very fast.
Perfect fit and etrailer was awesome as always!
Gwendolyn Y.
1/21/2025
Hey Herman! Thanks for always coming back. Hope to see you on your towing need!
The service at etrailer is excellent. My hitch arrived missing one part. I made one phone call and the part was sent right away. I have perched dozens of things from etrailer and only had problems twice and both times they were corrected.
The EcoHitch arrived sooner than expected and was packed well. All parts were present. The installation was quick and easy with a helper and the use of two jacks. The hitch fit perfectly ang was great quality. Very pleased for mounting my winch
I installed by myself with jack and pri-bar, the only thing I found out was it was 2 person job but 1 can do with truck on rack or on a lift.
No problems working great and would install again if needed.
Terry
6/22/2024
Over a year now installed and thousands on miles in use and not one problem, so if you need one Id recommend this one
As described.
Very fast shipping and quality parts.
Thank you!!
This product came to us exactly as advertised!
Perfect fit!!!
All the hardware was included and the instructions were clear as can be.
I did a solo installation in under two hours without removing the bumper.
Highly recommend etrailer
Awsome product with a perfect fit!
After doing some research on hitches, I decided to go with the EcoHitch on my 2016 F250. I liked how the hitch when installed was about the same height as the rear hitch and didn't sit low like other hitches. I also have a Ranch Hand grill guard installed there was no interference. There is another post on this site that shows a similar setup to what I have and based on his post, I decided to go with the same setup. I installed the hitch in about 2 hours and installed it by myself.
Perfect fit!
Arrived with all necessary parts and fit perfectly. The wire for fishing the bolts worked perfectly. So far so good. Didn’t take pictures of hitch itself but my winch is where I wanted it and did by myself in around 90 minutes.
Very well made. Installation was fairly simple. It’s very useful for my accessories in front. Love it.
ETrailer is the best online store I've dealt with. They have everything you need and shipping is always fast.
Hitch was too short left to right. Holes would not align. M service texh needed to get on the road so we had to send to a shop to extend and make new holes. This product was supposed to fit the 2016 f250. It surely does not.
Easy install using a floor jack to hold the hitch in place. Would have been easier if I had some one to help but installed by myself. Every thing fit as it should.
Love it! Was easy to install, directions were easy to follow. I love the way it’s tucked up in the grill instead of below the bumper. Whenever you are stuck it’s usually the front end that’s buried and this gives you a way to winch without shoveling out the winch or receiver 1st.
the hitch is excellent , the fit was a little off .
the hitch is excellent , the fit was a little off .
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Gwendolyn Y.
12/9/2024
Hey Jacob. I'm glad that you were still able to get it to work with your brush guard. Sometimes colorful language helps. It looks awesome with your bike up front!