View Cart
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Item # 65080

lowest price pledge


Our Price: $97.19

You Save: 44%
Front Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping

Shipping Weight: 28 lbs

In Stock, Ships Today
65080 - Square Tube Draw-Tite Front Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

  • Draw-Tite
  • Front Mount Hitch
  • 9000 lbs Line Pull
  • 2 Inch Hitch
  • 500 lbs Vert Load
  • Custom Fit Hitch
  • Square Tube
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers, and more. Call 800-298-8924 to order Draw-Tite front hitch part number 65080 or order online at Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2". Front Hitch reviews from real customers.

  • All Info
  • Reviews (6)
  • Q & A (20)
  • Photos
  • Why etrailer?

Draw-Tite Front Hitch - 65080

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers, and more.


  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier, and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit for your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design


  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

65080 Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

65080 Installation InstructionsInstallation Details 65080 Installation instructions

This Product Fits The Following Vehicles

2007 - 2019 Toyota Sequoia

2007 - 2019 Toyota Tundra

California residents: click here

Customer Reviews

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 65080

Average Customer Rating:  4.8 out of 5 stars   (6 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers, and more.

- 65080

Hitch worked perfect and thanks for the instructions . My only regret is that I didn't think about drilling a hole in the skid plate myself for changing the oil filter ha! Again thanks hitch work perfect and looks good ! 612155

- 65080

Beyond fast and effortless delivery and service! Highly recommend this company! Got exactly what we ordered! Shipping was in process immediately after we ordered it online! Best follow up and customer services speedy fast! Definitely will tell others! 644910

- 65080

Pat was a tremendous help. Knowledgeable staff and great service. Quick delivery. Will definitely use your company again! 642762

- 65080

This was the easiest instal ever. The instructions were very clear and all went well. Thank you for all your support, 617985

- 65080

My hitch came in on time, the box was in good shape and easy to install. I used a floor jack to hold it in place. One tip I have I did not remove the skid plate to cut the 4'' access hole. If you are careful you can do this with the skid plate bolted on the truck and save time. Good luck. 615378

- 65080
2018 Toyota Tundra

I ordered a front hitch receiver for a 2018 tundra it came in a very timely manner,but it was comming out of the box when I received it. So l had to repaint the ends. It mounted easily ! 590751


Ask the Experts about this Draw-Tite Front Hitch
Do you have a question about this Front Hitch?

  • Will Front Mounted Receiver Hitch on 2013 Toyota Tundra Need to Be Removed to Change Oil
  • Neither the Draw-Tite # 65080 nor the Curt # 31198 would in themselves prevent you from changing the oil in your truck. What they will do is prevent you from removing the skid shield, which will block access to the oil filter. You can remove the skid shield entirely and leave it off permanently, or you can cut a 4-5 inch diameter access hole through the skid shield in the area directly under the oil filter. Because the hitch attachment hardware is meant as a one-time use item, we don't...
    view full answer...

  • Comparing Front Mounted Hitch Receiver for 2008 Toyota Tundra
  • The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65080 is my recommendation for you based on cost and features. The installation of this hitch is nearly identical to the Curt # 31198. The Draw-Tite has a measurement of 7-1/2 inches from the crossbar to the end of the receiver tube. The Curt receiver has a measurement of 4-5/8 inches from the crossbar to the end of the receiver tube. The weight ratings of the hitches are identical, so the 2-7/8 inch difference in...
    view full answer...

  • Does Skid Shield have to be Removed for a Front Hitch on a 2018 Toyota Tundra
  • On the Curt front mount receiver # 31198 there is a note stating that the skid shield will either have to be removed or you can trim it and reinstall in on your 2018 Toyota Tundra. For the Draw-Tite receiver # 65080 we have a note stating that the skid shield must be removed but nothing about being able to reinstall it. Some customers have noted that they had to make or enlarge a hole on a bottom panel in order to be able to change the oil. You may also consider using the Bike Bunk,...
    view full answer...

  • Comparing Curt and Draw Tite Front Hitches for 2018 Toyota Tundra
  • For your 2018 Toyota Tundra we have the Curt front hitch part # 31198 and the Draw Tite part # 65080 both as a confirmed fit and both really good options. Both install the exact same and have same capacities, but I like the Curt better as it's made in the USA and the Draw Tite is not. I attached a picture that shows the hitch installed for you to check out as well.
    view full answer...

  • Front-Mounted Hitch Receiver for 2017 Toyota Tundra 4X4
  • We can offer you a choice of two 2-inch front-mounted hitches for your 2017 Toyota Tundra. You can see both the Curt and Draw-Tite options by clicking on the link provided. Both Curt hitch # 31198 and Draw-Tite hitch # 65080 share 500-lb vertical load and 9000-lb line pull ratings. Both are no-drill installations using included hardware. The Curt has the advantage on price so I suggest this one over the Draw-Tite. Installation instructions are linked for you. If you plan to use a...
    view full answer...

  • Does Skid Plate of 2016 Toyota Tundra Need to be Modified to Install Front Hitch
  • There is a 4 inch diameter hole that needs to be cut in the skid shield of your 2016 Toyota Tundra to be able to install the Draw Tite front hitch part # 65080 that you referenced. I attached a diagram that shows where it will be.
    view full answer...

  • Comparison of Curt and Draw-Tite Front Mount Trailer Hitch Receviers for 2008 Toyota Tundra
  • We have two front mount hitches that are confirmed to fit your 2008 Toyota Tundra. The Curt 31198 and the Draw-Tite # 65080. They do have identical specs since they both have a 9,000 pound line pull and 500 pound vertical load. Both have a 2 inch recevier opening. Both bolt to your Tundra's frame and do not require any drilling. The largest difference is going to be the appearance once either is installed. The receiver tube of the Draw-Tite protrudes further forward than the Curt...
    view full answer...

  • Can Bike Rack be Used on Front Mount Hitch of 2019 Toyota Tundra
  • You can use a bike rack in the Draw-Tite Front Mount Trailer Hitch # 65080 although this is a 2" hitch so you would not be able to use a bike rack with 1-1/4" shank; you would need a bike rack for a 2" hitch like the Thule T2 Classic # TH9044 or Yakima HoldUp # Y02443. It is possible that using any bike rack will interfere with sensors that are located on the front grille of your '19 Tundra. We have not tested this specifically but it would make sense this would be the case.
    view full answer...

  • Size Of Front Hitch Receiver Opening For 2011 Toyota Tundra
  • The front hitch that is confirmed as a fit for your 2011 Toyota Tundra is the Draw-Tite Front Mount Trailer Hitch Receiver, part # 65080. This hitch does have a 2 inch receiver opening and is not available in a 3 inch version. This hitch has an easy bolt-on installation and requires no welding or drilling. If you have the front skid plate on your Tundra, it may have to be removed to install this hitch. Typically, the shanks of any bike carriers we offer fit either 1-1/4 inch or 2 inch....
    view full answer...

  • Can The Front Mount Trailer Hitch for 2010 Toyota Tundra be Used and Retain the Factory Tow Loops
  • Yes, when installing the Draw-Tite Front Hitch, # 65080, on the 2010 Toyota Tundra you will reinstall the front tow loops after raising the hitch into position. This will sandwich the hitch between the tow loops and the vehicle frame. I have linked the installation instructions for you to review. You may also be interested in the HighRock 4x4 Hitch Mounted Tow Strap Loop, # B4292201.
    view full answer...

  • Recommended Front Hitch for 2018 Toyota Tundra
  • The Curt Front Mount Hitch # 31198 and the Draw-Tite # 65080 for your 2018 Toyota Tundra are indeed just about identical in terms of their capacities and where they will mount on the truck. One thing that does differentiate the two models, and the reason I recommend the Curt, is the fact that the Curt # 31198 is made right here in the USA while the Draw-Tite hitch is made overseas. The Curt hitches are also known for their unique powder coat application which ensures a rust free hitch...
    view full answer...

  • Do I Lose The Tow Hooks When Installing Draw Tite Front Mount Hitch # 65080 on a 2012 Toyota Tundra
  • Good news! You will not have to sacrifice your tow hooks on your 2012 Toyota Tundra when installing the Draw-Tite Front Mount Hitch # 65080. The installation instructions are attached, and the very first step is to remove the hooks, but, keep them to reinstall later. Just a side note is that if your Tundra has a front skid shield it will need to be removed so you will have access to your engine oil filter.
    view full answer...

  • Skid Plate Removal and Ground Clearance w/Front Mount Trailer Hitch Installed on 2007 Toyota Tundra
  • You do not have to remove the skid plate on your 2007 Toyota Tundra to install Curt front mount receiver # 31198 but you can if you wanted to. You should be able to loosen the skid plate enough to move the skid plate out of the way enough without having to remove the entire hitch. I have linked the installation instructions for you to view. The receiver will be just below the lowest trim piece on the front bottom of the vehicle to give you an idea of ground clearance. I included a picture...
    view full answer...

  • Recommended Front Mount Hitch for 2015 Toyota Tundra
  • The two front mount hitches available that are confirmed to fit your 2015 Toyota Tundra, the Draw-Tite # 65080 and the Curt # 31198, are extremely similar to each other and differ only in their slight design variation. Both hitches will provide a 2 inch receiver opening with a 500 vertical load maximum and 9,000 pound line pull capacity. The only real difference between the two models is that the Draw-Tite # 65080 has a receiver tube that protrudes a bit further forward than the Curt....
    view full answer...

  • Front Mounted Trailer Hitch and Motorcycle Carrier for 2015 Toyota Tundra
  • The Draw-Tite Front Mount Trailer Hitch # 65080 that fits your 2016 Toyota Tundra has a vertical load limit (the front mount hitch version of tongue weight) of 500 lbs; you can use this hitch and tow your trailer at the same time so long as your weights stay within their respective capacities. To haul your bike I recommend checking out the MaxxTow MaxxHaul Aluminum Motorcycle Carrier # MT70101. The carrier weighs 53 lbs and has a 400 lb capacity; your bike will fit so long as it has...
    view full answer...

  • 2-Bike Carrier for Casita 17-Foot Spirit Deluxe A-Frame Travel Trailer
  • The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 will fit on A-frame trailers so long as the available free space on the frame allows installation at one of three specific outside-to-outside frame widths. Those widths are 12-, 32- and 52-inches as shown in the linked photo. These various fits are made possible by choosing how the angled legs are installed; either both inward, one inward or both outward. Please refer to the linked photo. If you confirm you have...
    view full answer...

  • Front Mount Hitch Receiver and Oil Changes for a 2012 Toyota Tundra
  • Customers have stated that in order to change the oil on a 2012 Toyota Tundra with front mount hitch # 31198 installed they have had to either leave off the skid plate or modify it to avoid having to take it and the hitch off every time the oil needs to be changed. The other front receiver option that fits your truck, # 65080, requires removal of the skid plate so it would not be an issue unless you wanted to keep the ski plate..
    view full answer...

  • Will Front Mount Trailer Hitch # 65080 Fit a 2008 Toyota Tundra TRD with Off Road Package
  • The Draw-Tite front mount hitch # 65080 is listed as fitting all styles of the 2008 Toyota Tundra. I have included a link to the installation instructions for you to view. The hitch has a 500 pound vertical load capacity but you need to determine the capacity of the front axle to know if you can add a carrier and bike to the the front of the truck. Front mount hitches are made more for winching applications where there is not as much vertical load.
    view full answer...

  • How Does a Bolt Leader/Fishwire Work when Installing a Front Mount Receiver on a 2008 Toyota Tundra
  • I have included links to a video that, in part, shows how to fishwire hardware when installing a hitch and to our help article with installation tips. Basically, you will run the fishwire through the hole that you will be using with the spring-looking end going in first. Pull it out through another access hole. Slide the block spacer on first. Thread the hardware to the spring end and then pull the other end of the fishwire back through the first hole so that the threaded part of the...
    view full answer...

  • Front Mount Trailer Hitch for a 2014 Toyota Tundra SR5 with Off Road Package
  • I checked with Draw-Tite and front mount hitch # 65080 is listed as a fit for all models of the 2014 Toyota Tundra. I have included a link to the installation instructions for you. Prior to installing the hitch and plow, make sure to check the front axle weight rating to make sure it can be used with a plow. The hitch itself is rated for 500 pounds vertical load and a maximum of 9,000 pounds straight line pull (if using a winch).
    view full answer...

Do you have a question about this Front Hitch?

  • Why

    At we guarantee:

  • Highest quality front hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate front hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Alexander C
Photos by:
Stacy F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924