1. Front Hitch
  2. Draw-Tite
  3. Front Mount Hitch
  4. 500 lbs Vert Load
  5. 9000 lbs Line Pull
  6. Custom Fit Hitch
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Item # 65041
lowest price pledge
Our Price: $146.90
You Save: $105.77
Front Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 32 lbs
In Stock
65041 - 9000 lbs Line Pull Draw-Tite Custom Fit Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more. Call 800-298-8924 to order Draw-Tite front hitch part number 65041 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2". Front Hitch reviews from real customers.
  • All Info
  • Reviews (10)
  • Q & A (10)
  • Photos
  • Why etrailer?

Draw-Tite Front Hitch - 65041

  • Draw-Tite
  • Front Mount Hitch
  • 500 lbs Vert Load
  • 9000 lbs Line Pull
  • Custom Fit Hitch
  • 2 Inch Hitch
  • Square Tube

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.


  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design


  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

65041 Draw-Tite Front-Mount Trailer Hitch Receiver

Installation Details 65041 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 65041

Average Customer Rating:  4.4 out of 5 stars   (10 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

- 65041
2000 Toyota 4Runner

Ordered my hitch at 2pm on a Wednesday. It was at my door by 2p THE NEXT DAY! Bolted right up and worked great on my 2000 Toyota 4runner. Slight frame modification, but hardly anything. Would buy again without question! 607142

- 65041

etrailer rep was very helpful and expedited delivery of my order. 330152

- 65041
2001 Toyota Tacoma

Draw Tite front mount trailer hitch is not an easy installation on a 2001 Toyota Tacoma as advertised unless you think drilling an 11/16" hole in your frame with a 1/8" starter hole (largest bit I own is 1/2"). Be aware that the very front plate can only be removed by removing the draw Tite trailer hitch. You can remove the next protective plate without issue to access oil filter and such. 612175

- 65041
2004 Toyota Tacoma

Excellent quality and value!. All welds are very good, finish is tough and looks good. Heavy duty construction and better than I expected. The unit tucks-in tightly just behind and below the bumper, is barely visible when installed. Fit was a bit tight, and I had to loosen the first bolts I put in in order to align the hole in the side-bolt on the right (I almost decided to drop the assembly and file the slot for the bolt). It was a tough fit, but it did ultimately fit. If the slot had been about about 1/8 inch longer, it would have been very easy to install. I would buy this again without a moment's hesitation. 575881

- 65041

Have a long cheater bar to remove bolts on tow hooks; I broke a 3/5s socket extension, but fortunately had another one. The 11/16 holes you need to create are a little loose; I shimmed the first and didn't put the next one all the way through so it would be snug. The side rails are a little wide, I put two washers on each side to make it snug. The hitch does not interfere with the skid plate, it is snug but good. Looks good! I am using it for a bike rack when towing my pop up camper. Good Price, free shipping. 748872

- 65041
2001 Toyota 4Runner

this hitch will fit a 2001 Toyota 4runner.you have to do a little work,but it will fit 713812

- 65041
2004 Toyota Tacoma

Fast order quick shipping!! Product arrived packaged good and for like a glove on my gen 1 2004 Tacoma!! Would highly recommend!! 695039

- 65041

Just as advertised!!! Hooked up perfect to my truck!! If you don’t have any help use a roll jack if you have one and put it in place. 457432

- 65041
2002 Toyota Tacoma

Did what I wanted. 48461

- 65041

Good Product I am happy with this product and I have attached my Snowsport HD Plow to this. It was a little difficult to attach as I had previously installed a brush guard and those bolts had rusted. I had to heat the bolts to remove them (along with PB Blaster) and still broke one of the welded frame nuts loose. But with a little thinking, I got a new bolt from the hardware store, dropped it in from inside the frame and the installion continued. Heavy duty product and wonderful customer service. I would buy again. 2737

A little Never Seez or other anti seize during assembly is your best friend during disassembly.
-- comment by: John - 09/03/2014


Ask the Experts about this Draw-Tite Front Hitch

  • Recommended Winch for Front of 2004 Toyota Tacoma 4x4 with Draw-Tite Front Hitch
    The Draw-Tite Front Mount Trailer Hitch Receiver # 65041 is rated for up to 9,000 lbs line pull but you can honestly use whatever size winch you want to for your 2004 Toyota Tacoma. As long as you don't exceed the weight rating of the front mount hitch/winch you are good to go. For your application the 9,500 lb Bulldog Winch Standard Series Off-Road Winch # BDW10042 is a great option because it is rated slightly higher than your front mount hitch (so you get the most out of that weight...
    view full answer...
  • Does Draw Tite Hitch # 65041 Fit 2003 Toyota Tacoma
    Yes, the Draw Tite hitch # 65041 does fit your 2003 Toyota Tacoma.
    view full answer...
  • Parts needed to Flat Tow a 2004 Toyota Tacoma Behind an RV and Does Skid Shield Get Removed
    Looking at the instructions for the Blue Ox base plates for the 2004 Toyota Tacoma ( # BX3728 for 4-wheel drive models or 2-wheel drive Prerunner models and # BX3744 for 2-wheel drive, non-Prerunner models) the factory skid shield is not removed. I have linked the instructions for you to view. For a compatible tow bar I recommend the Alpha, # BX7380. It is rated for 6,500 pounds and it comes with safety cables. For lighting you could use the EZ mount kit # EZT20B or, for a more permanent...
    view full answer...
  • Front Mount Trailer Hitch Recommendations for a 2003 Toyota Tacoma Prerunner TRD
    We have two options for front mount hitches specifically designed for your 2003 Toyota Tacoma and neither of them state that the skid plate will have to be removed for installation. First is the Curt Hitch, # C31013. This hitch mounts to the bottom of the frame rails. Unless your transmission cooler is mounted there the hitch will not interfere. Next is the Draw-Tite Hitch, # 65041. This hitch attaches to the bottom of the frame rails and also has 1 attachment point on the outside of...
    view full answer...
  • Can Front Mounted Hitch Be Used to Flat Tow 2004 Toyota Tacoma
    A front mounted receiver hitch is not designed to be used as an attachment point when the vehicle is being flat towed. To flat tow your 2004 Tacoma, a tow bar base plate must be used. I'd recommend the Blue Ox # BX3728 base plates and the # BX7380 Alpha tow bar, which includes safety cables. For a lighting solution, I'd recommend the # RM-155 bulb and socket taillight wiring kit. The kit provides an extra set of bulbs that install in the rear taillight assemblies. This kit won't require...
    view full answer...
  • Recommended Hitch for 1998 Toyota 4Runner
    I have a few different options for you, but the Draw-Tite Receiver # 65041 is not going to fit a 1998 Toyota 4Runner. If you want to stick with the Draw-Tite brand, I recommend going with the Max-Frame Hitch Receiver # 75091. It is a Class III hitch, has a 2 inch receiver, and is rated for a max of 500 lbs Tongue Weight and 5,000 max Gross Trailer Weight. We also have the Curt Class III Trailer Hitch Receiver # C13087. This hitch also has a max tongue weight of 500 lbs and a 5,000...
    view full answer...
  • Does Draw Tite Front Hitch for 2003 Toyota Tacoma Require Fascia or Bumper Trimming
    There is no fascia or bumper trimming needed to install the Draw Tite Front hitch part # 65041 that you referenced on your 2003 Toyota Tacoma. The hitch fits right under the front bumper of the vehicle.
    view full answer...
  • Will Transmission Cooler Or Skid Plate Interfere With Installation Of Front Hitch on 2001 Tacoma
    You can check the frame on your 2001 Tacoma as shown in the attached instructions to see where a front mount hitch # C31013 and # 65041 is installed. In the instructions it does state you have to remove the tow hooks and they will not be re-installed. The instructions do not mention a front skid plate. I called my contact at Draw-Tite and they said there are no complaints or concerns about the skid plate on the Tacoma. The transmission cooler lines would be the only thing that may interfere...
    view full answer...
  • Front-Mount Hitch for 2004 Toyota Tacoma for Use with Hitch-Mount Cargo Carrier
    Neither the Curt # D210 nor the similar dual-receiver extender # D-192 can be used with a trailer weight distribution system. Makers of WD systems warn against this practice; use of any type of hitch extender/adapter is unsafe with a WD system since it will shift the point where the trailer tongue weight is applied and could result in hitch damage. Hitch capacity is only reduced if the receiver portion only is used on D210. There may be a front-mount hitch made for your tow vehicle and...
    view full answer...
  • Can Westin Grille Guard and Front Mount Trailer Hitch Both Fit 2001 Toyota Tacoma at the Same Time
    The front mount trailer hitches for your 2001 Toyota Tacoma, including # 65041, and the grille guards including # 40-0905, install at the same places on the vehicle frame. Since they would have to occupy the same space you will not be able to have both a grille guard and a front mount hitch at the same time. If I had to choose I would go with the front mount hitch since it is much more useful. I have linked the installation instructions for you.
    view full answer...

Do you have a question about this Front Hitch?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality front hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate front hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.