Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
(49 reviews)
Price: $75.12
Hopkins
Add to cart
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
$75.12
Retail:$104.39
You Save: 28%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
8% prefer this
- All Info
- Reviews (49)
- Q & A (0)
- Photos
Hopkins Flat Tow Wiring Harness
- Wiring Harness
- Plugs into Vehicle Wiring
- Tail Light Mount
- Custom
- Hopkins
Wire your vehicle and get the signal lights required for flat towing without having to splice into your wiring with this custom, plug-in harness. Integrated diodes prevent feedback from RV for safe operation.
Features:
- Lets you wire your vehicle to accept your RV's tail, brake, and turn signal lights for flat towing
- Provides 4-way flat plug at front of towed car to connect to motor home
- Plugs in quickly and easily - no cutting or splicing of wires
- Connection points are located behind your vehicle's tail lights
- Prevents electrical feedback to safeguard towed car's electrical system
- Weatherproof box keeps built-in diodes protected
- Won't interfere with electrical system when towed car is not hooked up to RV
- Custom designed for your vehicle
- Includes wiring harness, mounting bracket, and installation hardware
- Extension loop for connecting towed car to RV is sold separately
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- 90-Day warranty
Wiring Your Towed Car with Hopkins
Wiring your car for flat towing has never been easier. No more testing wires or splicing into your electrical system. No need to painstakingly position multiple diodes beneath your vehicle. No worries about voiding your warranty. With this custom-fit towed vehicle wiring kit from Hopkins, all you have to do is plug the harness into your vehicle's existing wiring, which is located behind your car's tail light assemblies. No cutting, tapping, or splicing is required.
After plugging in the wiring harness, use the included bracket to mount the 4-way flat connector at the front of your towed car. An extension loop (sold separately) is required to connect your towed car to your RV.
Do You Need a Brake Light Relay?
Because your vehicle has a combined lighting system - wherein the brake signals and the turn signals are carried on a single wire - a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
56208 Hopkins Plug-In Simple Dinghy Towing Harness
Item # HM56208
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2018 Jeep Cherokee
California residents: click here
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles - HM56208
Average Customer Rating: 4.8 out of 5 stars (49 Customer Reviews)
Wire your vehicle and get the signal lights required for flat towing without having to splice into your wiring with this custom, plug-in harness. Integrated diodes prevent feedback from RV for safe operation.by: Roy07/24/2017
2017 Jeep Cherokee
I ordered all the parts required to safely flat tow out 2017 Jeep Cherokee Trailhawk from etrailer.com. The only part they didn't have was the Mopar Flat Tow Enhancement kit Jeep requires to flat tow this model.
Ordering from them was great, the website is easy to use and I was able to locate all the pieces compatible with my specific vehicle. The expert recommendations help my decision choosing the right parts. I ordered from etrailer even though I found some of the parts on other websites a little cheaper. I chose to pay a little more because of all the effort etrailer has put into installation videos and guides. I was very pleasantly surprised to learn from etrailer that they have a price match guarantee!
So my equipment consisted of the following
Mopar Flat Tow Enhancement Kit (from Jeep)
Roadmaster Battery Charge Line Kit for Towed Vehicles
Mighty Cord 7-Way RV Style Trailer Connector - Trailer End
WesBarg 7-Way, RV-Style Connector w/ 6' Long Coiled Cable Trailer End
Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
Hopkins Custom Tail Light Wiring Kit for Towed Vehicles
SMI Stay-IN-Play DUO Supplemental Braking System
Roadmaster Brake-Lite Relay Kit for Towed Vehicles
Blue Ox Alpha Tow Bar - Motor Home Mount - 6,500 lbs
Blue Ox Base Plate Kit - Removable Arms
Blue Ox Tow Bar Cover - Aladdin, Aventa LX, Aventa II
The installation videos are great but not all inclusive. Take the time to read the instructions that come with the parts. This is a major project, I took about 30 hrs over a full week but as you'll see in the pictures I took s few extra steps to make a cleaner look.
Some of those extra steps:
The base plate install requires the bumper be modified cutting off a flange on each side, I spray painted this to prevent corrosion.
In the install video of the baseplate on the drivers side they use an extra quick link (not included) to run the safety cable around the wiper fluid reservoir. I took the time to remove it and run the safety cable behind it.
I didn't want our nice new vehicle to look like it can be towed so I played the brake away switch and 7 way trailer plug behind the license plate, so when not being towed our vehicle looks great!
Some things to be aware of. The Brake air cylinder that mounts to the brake pedal with four bolts may need longer bolts, it did on our Jeep. Spend the money for weather tight heat shrink crimp fittings. The Hopkins wire harness was about 1.5 feet short to get to my plug location. Buy extra zip ties, electrical tape and split loom.
I recommend reading all the various installation manuals and watching all the videos because the various components integrate together and if you install one at a time you'll be doing a bunch of extra work.
The brake light relay is a real pain in the butt, not because of the hardware but because of the location of the brake light switch which is very hard to get to.
Overall I am very happy with the products and how the installation looks. We haven't towed it yet but do not expect any problems.
by: Ed06/26/2019
It fit my Jeep Cherokee. I did take it to an independent shop for installation. They found they did not need to remove the front cowling as suggested in the instructions. It was easy to fish from the underside of the car two in front of the radiator where it was wired into another receptacle. I have since towed the Cherokee approximate 4000 mile with all lights working properly.
Ed
6/27/2020
It works well. Did not need to remove front bumper facia as instructed. Made job a lot easier
by: Jim W04/19/2020
Saturn Relay
The product works as specified perfectly. I've used it for several thousand miles without issue. I followed the installation video and completed the work in less than an hour. It was fairly easy but did require me to lift the Jeep on ramps to get under the car. The only change I made: I replaced the 4-pin connector with a 6-pin connector. Also, because of the wiring of my model Jeep, I had to pair the installation with RM-88400 (Roadmaster Brake-Lite Relay Kit). I am a DIYer but not a car mechanic.
by: Duane12/28/2017
2017 Jeep Cherokee
This is a quality kit. I installed it on our new 2017 Jeep Cherokee Latitude. All of the connections were very easy and clean with no cutting of the Jeep wiring harness. I took the time to run it all through plastic automotive wire loom and under the belly pan. I did the installation myself so I knew it would be done correctly. Professional installers would not have taken the time or spend the extra few dollars to purchase the protective wire loom. I hid the six pin trailer connector behind the front license plate because I did not want the connector sticking out of the grill. I also purchased an additional short trailer connector so I could unplug the wiring harness from the front fascia of the jeep so I did not have to cut wiring if I needed to change something or make a repair. Everything worked perfectly when completed. I am very pleased with this product.
by: Pete05/28/2021
2017 Jeep Cherokee
This kit was perfect fit and relatively easy to install. I used a 6-Pin connection instead of the 4-Pin so I could include a power conductor.
by: Rick10/25/2020
2014 Jeep Cherokee
I bought this because it was supposed to require no splicing of wires. On my 2014 Jeep Cherokee Latitude when I tried to pass the plugs that go on the end of the wire through the body to where the taillights are mounted I found that the plugs don't fit through the hole in the body. The video was great but it didn't show how they got the plugs through the body. My solution was to cut the harness, pass it through the body then use waterproof butt connectors to reconnect the harness.
by: Orville L.02/09/2017
2015 Jeep Cherokee
A kind of "plug and play" solution for wiring my car to be towed behind my motor home. Easy plug in harness with plenty of wiring to reach the front of the car. Much easier than cutting the existing wiring to install diodes.
by: David05/12/2018
2018 Jeep Cherokee
Bought a different wiring harness from another vendor and after installation the lights did not work correctly.
Ordered this harness from etrailer as it was the recommendation for a custom fit.
Easy installation just like the other harness, but this one works perfectly.
No feedback to the coach and correct light sequence.
by: Patricia 03/27/2023
Super easy plug in installation
by: Dave A12/03/2016
Jeep Cherokee
Jena did a terrific job of unravelling the confusion of the correct part for my new Jeep Cherokee TrailHawk. Installation was easy and relatively quick considering I had no access to a lift, which would have cut the time involved about in half. As usual E-trailer comes through in customer service and product knowledge.
by: Randall R10/08/2017
The Hopkins tail light kit works great, no wires to cut. I appreciate the etrailer videos, a big assist so you don't go into a job blind.
by: Robert 07/12/2022
Wanted a system that would work with vehicle lights. Easy install and works as described.
by: Rick04/06/2021
This was to replace the one I purchased from you about 2 to 2 1/2 years before this one. It appeared to have a couple of bad diodes. It lasted about a year and then I sold my motor home.
by: Quentin06/19/2019
Could not have been easier to install. Everything fit perfectly. Videos were very helpful. Low level skill required for install.
by: William01/29/2018
I haven't installed it yet, but it looks great and the instructions and video online assure me that the installation will go smoothly.
by: James06/04/2022
Worked as expected.used on 16 jeep trailhawk for 2000 mi. Trip to east coast.very satisfied.
by: Nathan07/27/2018
2017 Jeep Cherokee
VERY GOOD QUALITY PRODUCT PLUGGED RIGHT UP TO THE FACTORY HARNESS AND THERE WHERE NO MODIFICATIONS OR WIRES THAT HAD TO BE CUT. I WOULD RECOMMEND THIS PRODUCT TO MY CUSTOMERS
by: Tony R02/13/2017
2016 Jeep Cherokee
This kit made wiring of the tail lights very easy.
by: Robert12/16/2017
2018 Jeep Cherokee
This product was used on a 2018 Jeep Cherokee and fit perfectly and worked perfect
by: Robert12/16/2017
2018 Jeep Cherokee
This product was used on a 2018 Jeep Cherokee and fit perfectly and worked perfect
by: Richard01/26/2018
so far so good, have had no problems, was very easy to install
Richard
1/26/2019
no problems, works great
by: Raymond02/08/2018
Product was as described however I have not yet installed it.
Raymond
2/8/2019
The harness is working as described.
by: Stephen J03/05/2017
Great product easy to install
Stephen J.
3/9/2018
Product has worked great
by: Dale07/08/2022
2016 Jeep Cherokee
Fits my Jeep Cherokee perfectly.
by: Steve 03/24/2023
Worked perfect. Thanks.
25
49
Show More Reviews
See what our Experts say about this Hopkins Flat Tow Wiring Harness
- Flat Tow Wiring Harness for a 2017 Jeep CherokeeFor a wiring harness that will allow your motorhome to activate the taillight on your 2017 Jeep Cherokee, I recommend using the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208. The Hopkins harness is a direct plug and play option that will not require you to cut or splice any wires on your Jeep. If you have a 6-pole trailer connector on your motorhome which most do, then you will also need the Pollak 6 Pole to 4 Pole Connector Adapter part # PK12717. I have attached...
view full answer... - What is the Correct Wiring Kit to Flat Tow a 2017 Jeep Grand CherokeeThe Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56208 that you referenced will fit a 2017 Jeep Cherokee, but is not compatible with your 2017 Jeep Grand Cherokee. A similar wiring kit that is confirmed to fit your Grand Cherokee is the Tow Ready # TR118821. This will operate in much the same way as the Hopkins # HM56208. To complete your flat towing setup you will also need a base plate kit, a tow bar, safety cables, a supplemental braking system, and most likely a high-low...
view full answer... - Parts Needed to Flat Tow 2014-2018 Jeep Cherokee KLYes, your Jeep Cherokee KL can be flat towed; though you did not mention the year of your Cherokee, the KL started in 2014 and each of the parts I recommend for you will be compatible with 2014-2018 Cherokees. There are a number of parts you're going to need in order to flat tow your Jeep, starting with compatible base plates. I recommend the Roadmaster Direct Connect Base Plate Kit # RM-521447-5 which is compatible with all 4WD Cherokees with the exception of Trailhawk models. If you...
view full answer... - Wiring Harness Recommendations For Flat Towing 2014 Jeep Cherokee TrailhawkYou do need a compatible flat tow wiring harness to safely tow your 2014 Jeep Cherokee TrailHawk 4x4. My best recommendation for you is the Hopkins # HM56208 which is custom made to plug into your vehicle's existing wiring. In addition to a wiring harness, flat towing your Cherokee TrailHawk 4x4 from your RV requires quite a few different parts if you haven't obtained these already. Not only do you need a tow bar like the Roadmaster # RM-522 with a compatible baseplate like our # e98952,...
view full answer... - Recommended Tow Bar Wiring for 2017 Jeep Cherokee TrailhawkThe Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56208 referenced in your question is confirmed to work on your 2017 Jeep Cherokee Trailhawk. This will let you wire your Jeep to accept the RV's tail, brake and turn signal lights for flat towing. You will not need to cut or splice any wires as this will plug into connection points located behind your vehicle's tail lights, so you do not need to worry about voiding the vehicle's warranty. If you are using a supplemental braking...
view full answer... - Equipment Needed to Flat Tow 2014 Jeep Cherokee Behind MotorhomeIt looks like you're pretty much on track. The # RM-676 Nighthawk tow bar would be a good choice, it includes the safety cables and the wire umbilical as well as the wiring connector that would install on the front of the Cherokee. You'd need to cut the 4 pole connector off the # HM56208 and wire it into the connector included with the tow bar, but other than that, the # HM56208 would work great. Since you have the Trailhawk sub-model, the # RM-521447-5 base plates you mentioned wouldn't...
view full answer... - Parts Needed to Flat Tow 2016 Jeep Cherokee Trailhawk 4WDA great place to start your flat towing preparation process is the linked article that covers each of the components required for safe and legal flat towing behind a motorhome RV. Additional articles on specific items are also included for you. Starting with base plates for the Jeep Trailhawk, I suggest the Curt # C46JR which has removable arms. An install video is linked for you. The Alpha tow bar # BX7380 that you referenced is an excellent choice since it includes the required safety...
view full answer... - Should SMI Stay-IN-Play DUO Braking System SM99251 Be Installed After Stop Light Switch RM-751471The Hopkins flat towing wiring harness kit # HM56208 is a correct fit for your 2017 Jeep Cherokee and this pretty much just plugs in at the taillight connectors; the white ground wire is to be installed to a metal surface. The SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 is best installed AFTER you install the Stop Light Switch # RM-751471. I asked our most-experienced installer and he said the SMI install will go easier if you have the stop light switch already in place;...
view full answer... - How To Flat-Tow a 2014 Jeep Cherokee TrailhawkIn order to flat-tow a 2014 Jeep Cherokee Trailhawk with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may also be a few other smaller components that are needed depending on options the vehicle is equipped with. For a tow bar, I recommend the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676. The Nighthawk is one of the...
view full answer...
- Is Brake Light Relay Kit Required for Flat Towing a 2015 Jeep Cherokee TrailhawkYes, you will need to use the Brake Light Relay # RM-88400 since you are using the Blue Ox Patriot # BLU37TR, even though you are using the Hopkins Wiring Kit # HM56208 on your 2015 Jeep Cherokee Trailhawk. The relay kit is just required for any braking system that physically pushes on the brake pedal like what the Patriot does. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a...
view full answer... - Flat-Tow Wiring Harness and Supplemental Braking System for a 2016 Jeep CherokeeI do have options for you but neither the Roadmaster Tail Light Wiring Kit part # RM-155 or the Blue Ox Tail Light Wiring Kit part # BX88267 will fit your 2016 Jeep Cherokee as there is not enough room inside the tail light housing for the new bulbs. Instead, I recommend the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208 as it is a completely plug and play kit that does not require you to cut any wires or the tail light housing. There won't be any issues using...
view full answer... - Wiring Harness To Activate Tail Lights On 2017 Jeep Cherokee For Flat Towing Behind Motor homeI do have an option for you but the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118605 is only for towing a trailer with the Jeep and not dinghy towing the Jeep behind a motor home. For dinghy towing the Jeep, I recommend the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208 which plugs into the vehicle taillights extends to the front of the vehicle to plug into the motor home. This will allow the Jeep's lights to illuminate in sync with the...
view full answer... - Flat Towing Equipment Needed For A 2018 Jeep Grand Cherokee LimitedThe Mopar kit #82216418AA was designed to maintain power to the electric steering pump to prevent the "Death Wobble" that owners were experiencing while towing their Jeeps. It should specifically say in your owner's manual if you need it but you can also contact you local Mopar dealer with all the specifics of your 2018 Jeep Grand Cherokee to confirm the necessity of this kit. The Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56208 you ordered is not a compatible wiring...
view full answer... - Is MOPAR Harness Needed to Flat Tow 2017 Jeep Cherokee with Active Drive IIYour 2017 Jeep Cherokee does need MOPAR part # 68321424AB to flat tow it. We do not carry the harness and to the best of my knowledge it's only available from a dealership. We do have the rest of the parts you need though. Here's a list of what I recommend: Demco Commander II tow bar, part # DM9511012 Demco tabless base plates, part # DM9519307 Stay-IN-Play DUO braking system, part # SM99251 Plug in wiring harness, part # HM56208 I've linked install videos of each part for you. I've...
view full answer... - Is The Mopar Flat-Tow Wiring Harness Needed for a 2018 Jeep Cherokee TrailhawkIn order to flat tow a 2018 Jeep Cherokee Trailhawk you will need a number of components which I have attached for you below along with some recommendations. In regards to the wiring, you will need both a tail light wiring kit like the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56208 and a power steering pump wiring kit, the Flat Tow Performance Kit 68321424AB (Obtained Through Dealer) which I think is what you are referencing. The Flat Tow Performance Kit activates...
view full answer... - Installation of Hopkins Towed Vehicles Wiring Kit on a 2017 Jeep Cherokee OverlandThe Hopkins Wiring Kit for Towed Vehicles # HM56208 is confirmed to fit all models of the 2017 Jeep Cherokee so it will work great on your Overland. The harness plugs in behind the tail lights, like you said. You'll need to remove both tail lights by removing the clips. You'll need to open the tail gate to access this. Then the tail light assemblies will disconnect from the Jeep. Behind them are the plugs for each light which have connectors that will mate with the Hopkins harness. If...
view full answer... - Parts Needed to Flat Tow 2017 Jeep Cherokee Trailhawk with Factory Tow PackageThe Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56208 mentioned in your question is compatible with your 2017 Jeep Cherokee that has the factory tow package installed. This is a custom, plug-in harness that will connect behind your vehicle's tail lights and provide a 4-way flat plug at the front of the Jeep to connect with your motor home. If your RV has a 7-way connector, then I recommend adding the Hopkins Adapter for 7-Way to 4-Wire Flat # HM47065. To complete your flat...
view full answer... - Recommended Set-up For Flat Towing A 2017 Jeep Cherokee TrailhawkA tow dolly is only allowed for your 2017 Jeep Cherokee Trailhawk if you have a front wheel drive model and lift the front wheels off the ground. All other versions do not allow dolly towing according to the online owners manual for your vehicle. Front wheel drive vehicles cannot be flat towed or 4x4 models with 1-speed Power transfer unit. However, if you have the 2-speed power transfer unit 4x4 you can flat tow. If you want to flat tow your 2017 Jeep Cherokee Trailhawk, I recommend...
view full answer... - Compatibility of Parts Needed to Flat Tow 2017 Jeep Cherokee Behind MotorhomeYou've almost got it! The Blue Ox # BX1138 base plates are a fit for a 2017 Cherokee, unless it's a Trailhawk model in which case you'd use # BX1136. The Hopkins # HM56208 would work well, as well as the # BX88206 umbilical, but you'd need to cut off the 4-pole connector on the # HM56208 and wire it into the 6 pin socket included with the umbilical. The # RM-910030-5 bracket would be fine, as would the Blue Ox Patriot braking system # BLU37TR. For a tow bar, the Blue Ox Ascent # BX4370...
view full answer... - All Parts Needed to Flat Tow 2017 Jeep Cherokee TrailhawkI can absolutely give you a summary of all the parts that are needed in order for you to flat tow your 2017 Jeep Cherokee Trailhawk. You'll need base plates, a compatible tow bar, safety chains, wiring, and a supplemental braking system, all of which I'll list for you: - Demco Tabless Base Plate Kit # DM9519308 - Demco Commander II Non-Binding Tow Bar # DM9511012 - Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56208 - Wesbar Coiled Adapter - 7-Way RV to 4-Way or 5-Way...
view full answer... - Is Brake Lite Relay Needed with Install of Hopkins Tow Bar Wiring Kit 2017 Jeep CherokeeYou are correct. Since the brake lights of your 2017 Jeep Cherokee do not come when you hit the brakes and the vehicle is off you do not need a brake lite relay with the install of the Hopkins tow bar lighting kit part # HM56208 that you plan to install.
view full answer... - What Versions of Jeep Cherokee Trailhawk Can be Flat TowedDoes your 4WD option give you the option for a 4 high and a 4 low? If so then you have a 2 speed transfer unit. Front wheel drive vehicles cannot be flat towed or 4x4 models with 1-speed Power transfer unit. However, if you have the 2-speed power transfer unit 4x4 you can flat tow. If you want to flat tow your 2017 Jeep Cherokee Trailhawk, I recommend the Blue Ox Base Plates # BX1136 which are a confirmed fit because of how easy they are to use compared to other kits. Then for a tow bar...
view full answer... - Recommended Flat Tow Wiring Kit for a 2017 Jeep CherokeeHey Tom, thanks for reaching out! I recommend using the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56208 for your 2017 Jeep Cherokee because it tees in behind the tail lights so you don't have to splice any wiring in.
view full answer... - What Are The Best Parts To Flat-Tow a 2016 Jeep Cherokee TrailhawkIn order to flat-tow a 2016 Jeep Cherokee Trailhawk with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may also be a few other smaller components that are needed depending on options the vehicle is equipped with. For a tow bar, I recommend the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676. The Nighthawk is one of the...
view full answer...
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Bradley B
Written by:
Alexander C
Test Fit:
Robert C
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Product Experts Available Now!
Call 1-800-940-8924
Roy
7/30/2018
Still very happy with our purchase. We’ve towed over 10k miles and have had zero issues with our tow setup. I’ve shared my experience with several other RVrs and recommended your company for their needs. Thank you