This heavy-duty fishing rod holder made of rigid plastic mounts to your boat in seconds with (2) 4-1/2" vacuum cups. Attach it to your console or cooler to keep rods or your net handy. Prevent tangled rods while motoring to another fishing spot.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors. Steve here with etrailer.com. Today we're talking fish and rod holders, specifically the SeaSucker Heavy Duty Rod Holder with a nice Vacuum Mount in white color. Folks, as you can see, you got the main tube here. You simply pull the pin, put the rod down inside, push the pin back through in the appropriate spot, and you are ready to go. Obviously, you have to have it mounted to the side of the boat.
These four and a half inch wide vacuum mounts come with the nice heavy duty plastic case covers. That keeps material from getting nicked, scratched, debris, that kind of stuff in there. It does use both of these to hold in place. I'm just gonna do one just to kind show you it in use. You got an orange indicator.
Just simply pump, pump, pump until all the orange disappears, showing you that all the air has been vacuumed out of that particular one. Now I can demonstrate that by holding that there. I can try to show you this other one here. It's not attached at all. It has an amazing 210 pounds of pull rating once they're both engaged.
To release the air back inside and take it off, there's two rubber taps here. You simply push in, pull up a little bit, and that lets the air back behind it. Two holes here are where it's pumping the air out. Those orange indicators, you wanna make sure you're lubricating those seals and everything in there. There is a gel that's sold separately by SeaSucker.
I recommend it. I'll put it on the screen for you as well, but you simply keep those lubricated. It keeps debris, moisture out and everything, keeps it working properly. Overall, it's 10 inches wide, and it's gonna carry one, or 10 inches tall, rather. It's gonna carry one rod. It is an inch and three quarter inches inside diameter on this hole, so inch and three quarters inside diameter. Limited lifetime warranty. Made right here in the US. A great product by SeaSucker. Once again, folks, it can attach to metal, glass, fiberglass. Any kind of flat, non-porous surface. You can also put it at a different angle if you wanna do that, keep the rod out that way or vice versa, however you need to. Great little product by SeaSucker. Thanks for looking with me. I'm Steven, and have a great day.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.