Curt Solid Steel 2" Hitch Bar with Raw Finish - 12" Long

See what our Experts say about this CURT Hitch Fabrication Parts

• Does the Curt Solid Steel 2 Hitch Bar # D30 Come Pre-Drilled with a Hitch Pin Hole
  Yes, I spoke with my contact at Curt and she informed me that every Curt Solid Steel 2 inch Hitch Bar, # D30, comes pre-drilled with a hitch pin hole. Each one of the # D30 is 12 inches long and would come with the pre-drilled hole.
  view full answer...
• Solid 2 Inch Hitch Bar Extension Recommendation
  The solid bar extension we offer for a 2 inch hitch is the Curt Solid Steel 2 inch Hitch Bar, part # D30. This bar has a 5/8 inch diameter hole drilled in it and the overall bar length is 12 inches. We do not offer any trailer hitch extensions that have the weight capacity you are asking about. Using any extensions in a trailer hitch does decrease the tongue weight capacity by 50 percent.
  view full answer...
• Recommended Welding Rod for Curt Solid Steel 2" Hitch Bar D30
  For welding on the Curt Solid Steel 2" Hitch Bar, part # D30 a general purpose rod like a 7018 is recommended. If you click the provided link, you can see a product description video.
  view full answer...
• What are the Dimensions of the Curt Sold Steel Hitch Bar
  The Curt Solid Steel 2 Inch Hitch Bar, # D30, measures 12 inches long and 2 x 2 inches square. From the center of the 5/8 inch hole to the shorter end measures 2-1/2 inches. The distance the other way measures 9-1/2 inches.
  view full answer...
  
• Curt Manufacturing 49530 2 Inch Solid Steel Hitch Bar Dimensions
  The Curt Solid Steel 2" Hitch Bar with Raw Finish - 12" Long # D30 (manufacturer part number 49530) has measurements with a digital caliper of 2.0015 inches by 2.0130 inches.
  view full answer...
• Does Brophy Ball Mount BX20 Fit Over Combo Bar # D30
  Yes, the 2-1/2 inch ball mount part # BZ20 will fit over the 2 inch combo bar part # D30 that you referenced.
  view full answer...
• How To Determine Which Fabrication Shank Is Needed For 2-Inch Trailer Hitch And Cargo Basket
  It sounds like you need an adapter that will fit into the 2-inch trailer hitch receiver on your vehicle and also be able to attach your cargo basket that uses a 2-inch shank. If that is the case we do offer solid steel fabrication shank bars that will work for you. You will need to determine how long the shank needs to be. You will need to measure the distance from the center of the hitch pin hole on your trailer hitch to the end of the receiver tube first. Then measure the distance from...
  view full answer...
• 18 Inch Hitch Extender that Fits 2 Inch Trailer Hitch
  The # D30 you referenced is for hitch fabrication and it sounds like you simply need a hitch extender. There is an 18 inch extension, the Curt Extender for 2" Receivers -18" Long # C45796 which you can use with a bike rack. The only thing to note is that the use of any extender will reduce the overall capacity of the hitch by 50 percent and that includes the tongue weight capacity. This is important because the tongue weight capacity of your hitch is the max weight your bike racks and...
  view full answer...
• Creating a 16 foot Hitch Extension For Trailer
  The Buyers Products Black Receiver Tube # 337RT25848B is a receiver tube and not an extension. It will not be able to slide into each other as the tubing is 2"x2" square tubing the entire 4' length. You would be able to connect these with the Curt Solid Steel 2" Hitch Bar # D30 but it will require drilling a 2nd hole through the steel tubing and the hitch bar. It may be better to weld the hitch bar to the receiver tube with plug welds as this would be a stronger connection and it would...
  view full answer...
• Device to Allow Moving Car Hauler Trailer Into Storage Position Nose-In
  The trailer mover products we carry, such as the Trailer Valet Trailer Mover # STC-V211, install on the trailer tongue and allow you to maneuver the trailer either by hand cranking or by use of a cordless drill attachment # TVDA. Trailers of up to 500-lbs tongue weight are compatible. This jack offers 2-speed posi-traction operation and includes a steering handle. It swivels out of the way for travel. Please see the linked video. If your trailer tongue weight is too heavy for this solution...
  view full answer...
• Brainstorming Sidewind Trailer Jack for 2 Inch Receivers On Cargo Trailer Corners For Stabilization
  Interesting. We don't have that specifically, but there are a couple of routes you could go. Most trailers will use the Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1 # TJSC-24 for stability in the corners so you could mount a receiver shank to that and use # TJSC-24-HD as a sidewind crank. It sounds like you were picturing more of a trailer tongue style option, so you could use a jack like the Fulton Square, Fixed-Mount Marine Jack - Drop Leg - Sidewind - 30" Lift - 2,500...
  view full answer...

Do you have a question about this Hitch Fabrication Part?