1. RV Vents and Fans
  2. Ventmate
  3. Roof Vent
  4. Replacement Lid
  5. 14W x 14L Inch
  6. White
Vent Cover for Jensen Trailer Roof Vents - White

Vent Cover for Jensen Trailer Roof Vents - White

Item # 61628
lowest price pledge
Retail:$21.74
Our Price: $17.58
You Save: 19%
RV Vents and Fans
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.19 lbs
Quantity: 
In Stock
RV Vents and Fans 61628 - 4 Point Hinge - Ventmate
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Lowest Prices for the best rv vents and fans from Ventmate. Vent Cover for Jensen Trailer Roof Vents - White part number 61628 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (104)
  • Q & A (92)
  • Videos (1)
  • Photos
  • Why etrailer?

Ventmate RV Vents and Fans - 61628

  • Roof Vent
  • Replacement Lid
  • Ventmate
  • 14W x 14L Inch
  • White
  • 4 Point Hinge


  • Fits 14" x 14" Plastic Frame Vents
  • Easy to Install and Operate


22-0342 Vent Cover for Jensen Trailer Roof Vents - White





Video of Vent Cover for Jensen Trailer Roof Vents - White

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ventmate RV Vents and Fans - Roof Vent - 61628 Review

Today we are going to show you the Vent Cover for Jensen Trailer Roof, part number 61628. This is designed to fit 14" by 14" plastic frame vents. Its easy to install and operate when you have to replace your vent cover. It utilizes a hinge system that uses two smaller teeth on the outside and two larger teeth on the inside. It also includes new mounting hardware so you can quickly and easily make the switch. And that does it for the Vent Cover for Jensen Trailer Roofs, part number 61628.

.


Customer Reviews

Vent Cover for Jensen Trailer Roof Vents - White - 61628

Average Customer Rating:  4.9 out of 5 stars   (104 Customer Reviews)


- 61628
by:

Works great, perfect size, fast shipping 683943



- 61628
by:

product was received, looks good but its windy and cold here, so install will have to wait.. 608004



- 61628
by:

Just what I was looking for for my 1971 Shasta. Fit right onto the old rod. Keeps the rain and snow out! :-) 456476



- 61628
by:

Product worked well, then i accidently left the vent part-way open for several miles on the interstate. I have not been up on the roof to check if the switch was damaged, but it has not worked since. Fuse is fine. I'd recommend the vent, but don't drive with it open. Bill 432636



- 61628
by:

The screws holes on the vent cover and the arm that attaches for raising it up were offset from one another a bit and made for a little difficultly, but otherwise it is in and working perfectly. Particularly happy about this because Winnebago wanted $80 for the same vent cover - Yes, just the cover. Thanks 444043



- 61628
by:

My unit is a 1988 Bounder and the part fit perfectly only problem was I had to get 2 larger screws to hold hindge pin in - not included with part. Easy Job 523667



- 61628
by:

Fast shipping, correct part, good price. Thanks etrailer. I was worried because my camper is old. 771039



- 61628
by:

Great, Will use you for all future trailer part purchases 770196



- 61628
by:

Got here on time. Installed roof vent and it fit fine. 767701



- 61628
by:

Very nice to find the vent lid and such a quick shipping time frame. Really glad to get them fast cause the old loss were shot and the winter weather is around the corner. And they fit perfect. 730236



- 61628
by:

Very happy. Arrived quickly, fits perfect! Thanks! 706278



- 61628
by:

Received the replacement cover very quickly, found out it was the wrong one they sent a return goods order someday and are looking for the correct cover for me now. very friendly and helpful. 705554



- 61628
by:

I was very pleased with the vent I purchased from etrailer it was the right one ,after purchasing 2 others from local here they couldnt get me the correct one said my trailer was to old. Thank you E trailer and thank you for getting it to me so fast 662363



- 61628
by:

So far, it has been a good quality item. Good fit, and hasn't cracked yet. 662195



- 61628
by:

works as expected 659631



- 61628
by:

The quality of the product was sturdy and was easy to install. I am happy to have my camper vent working correctly. 657336



- 61628
by:

It is what I ordered. 637698



- 61628
by:

Couldn't find this part anywhere online, but e trailer had it...not only that, the part was shipped out same day and on my doorstep 2 days later. Great service and e trailer will definitely be my first stop next time I need parts for my camper 633773



- 61628
by:

Easy to get install, good fit 616913



- 61628
by:

I've ordered vent covers a couple of times (darn hail) from this company and I've been very pleased with the shipping time, product and etrailer customer service is exceptional! I wouldn't hesitate to buy from etrailers again. 596087


Comments
No complaints here. Ill always be a returning customer because etrailers offers such great customer service. Something that is hard to come by in todays world.
Angela G - 01/10/2020

64172

- 61628
by:

Exact replacement for my RV. Not available locally so I was grateful to find it. Comes with mounting arm. 2 things, 1) original screws do not fit b/c hole diameter is slightly larger on this unit but 2) the quality of the plastic in this unit is high, better than original equipment. 595203



- 61628
by:

Easy replacement, fit perfectly. 594984



- 61628
by:

Very nice piece . well made and great price . 576541



- 61628
by:

Thank you for the the "Excellent" service. The part ordered was not easily found, Etrailer had it and was a perfect match. I will definitely use Etrailer in the future. 567859



- 61628
by:

Haven't installed them yet, but the product looks great. Fast delivery of product. 564501


27
107
Show More Reviews

Ask the Experts about this Ventmate RV Vents and Fans

  • Determining Correct Replacement Vent Cover
    In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Ventmate # 69284; a 4 point hinge as seen on the Ventmate # 61628; continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the Maxxair # MA00-335001. I've...
    view full answer...
  • Replacement Roof Vent Lid With 3-Point Hinge
    Thank you for the photo; from that it looks like you have a 4-point hinge (like in the accompanying photo I added) and we do have a cover, the Vent Cover for Jensen Trailer Roof Vents - White # 61628 which may work for you. If you have an older vent there is also the Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge # CAM40147 which fits 14" x 14" Jensen vents with pin-style hinge (pre-1994). Another option is the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001 (White)...
    view full answer...
  • How to Pick Out Replacement Vent Cover for a Cargo Trailer
    Most likely the roof vents on your 2010 cargo trailer are 14 inch by 14 inch. It sounds like you are looking for a replacement vent cover for your trailer. You will need to select the vent cover for the vent on your trailer by the manufacturer of the vent and the attachment style of the cover. It is hard to say. Some of the vent cover manufacturers, like Ventline, have changed attachment hardware in the past and there are two styles. The newer style, like the Ventline Replacement...
    view full answer...
  • Replacement Cover for Jensen Trailer Roof Vent
    We offer replacement lids in various materials and colors for several brands of trailer roof vents including Jensen. The link provided will take you to our main page for all trailer roof vent covers. Filters on the page will allow you to match your hinge type, cover material, color, etc. We offer a 14- x 14-inch cover for Jensen vents, part # 61628, which is a flat white cover with a 4-point hinge. I also included a link to our page for complete vent assemblies in case you decide to...
    view full answer...
  • Determining Correct Replacement Vent For Heng Vent
    In order to determine if we have a replacement cover/lid that will fit you are going to need to check a few things on the existing vent. I have included a link to all the lids we carry. Then, if the measurements work out, you have to go by the hinge style. The lids we carry will have a 3 point hinge, like # 69284, a 4 point hinge like # 61628, or a continuous hinge like # BV0554-01. If none of these are a match then you would need to replace the whole vent assembly. I have also included...
    view full answer...
  • Replacement Trailer Roof Vent Cover with a 4-Point Hinge
    The 4-point hinge is common to Jensen roof vents. All of the 4-points we have are for Jensen vents so it does sound like that is what you have especially given the 1990 model year of your Prowler. While I am confident it is the correct replacement I do recommend taking a look at the video review linked and comparing it to either the old lid or the vent assembly.
    view full answer...
  • Replacement Roof Vent Lid for 2006 Coachman Travel Trailer
    Trailer makers rarely keep track of the specific vent products installed on their trailers so for your 2006 Coachman the best way to find a replacement vent lid is to determine which type of hinge you have. We offer all hinge types: 3-point, 4-point and continuous. It is quite possible that you do have a 14 x 14 roof vent since this is the most common size. These vents fit rough roof openings of 14-1/4-inches x 14-1/4-inches. The including link will take you to our main page for all...
    view full answer...
  • Need Replacement Roof Vent for Sno Pro Enclosed Trailer
    The Sno Pro website shows their entire range of enclosed trailers and does indicate that their CargoPro Standard series includes a 14 x 14-inch manual roof vent. The part you referenced, # 61628 from Ventmate, is a replacement vent cover (not a complete vent assembly) for a Jensen roof vent. Sno Pro does not specify any particular brand of vents in their specifications. If you need a replacement vent cover only you can select it based on the type of hinge it has. We also offer complete...
    view full answer...
  • Replacement Vent Cover For Jensen RV Roof Vent
    I have attached a link to our product page for the Jensen replacement vent covers we offer. You will need to know what the hinge style is on your cover to find the right replacement. The vent covers we offer will have either a 3-point, 4-point, or continuous hinge.
    view full answer...
  • Replacement Cover for Jensen Z26 AS 13 Roof Vent
    If your old vent cover was held on by a pin, we have some replacement vent lids that would work great for you. For white, use part # CAM40154 or for smoke colored, use # CAM40147.
    view full answer...
  • Replacement Vent Lid for a Jensen 7000 Series Vent on a 2001 Winnebago Leisure Seeker
    We have several vents that can be used as a replacement for Jensen vents. However, you will need to look at the images on the product pages, linked for you, and the dimensions of the opening the entire vent assembly fits in, not just the opening that the lid covers. The part numbers are: # 61628 # 69284 # 63112
    view full answer...
  • Measurements of Hinge on Vent Cover for Jensen Trailer Roof Vents # 61628
    I went to the warehouse and measured the Vent Cover for Jensen Trailer Roof Vents - White # 61628 for you. The hinge measurements of the tabs are 1 inch on the outsides and 2-1/8 inches on the insides. The attached photo shows all the spacing dimensions of 2-3/8 inches and 1/2 inch on the outside.
    view full answer...
  • Replacement Vent Cover for 1988 Terry Travel Trailer
    We can help you with your vent to get you ready for travel trailer season! Most square trailer roof vents share very similar dimensions and the keys to finding the correct replacement part are the vent size and hinge type. If we cannot offer you the correct replacement lid by itself we should still be able to get you going with a replacement vent assembly. The linked page will take you to our main page for vents and replacement lids. Click on replacement lid at the top of the page...
    view full answer...
  • Replacement Vent Cover For 1990 Fleetwood Jamboree 27 Foot RV
    Most vent covers are the same standard size of 14x14 inches, but the hinges are not all the same. I've attached an image to help you. There are continuous plastic hinge options like # BVD0449-A01, 4 point hinge options like # 61628, 3 point hinge options like # CAM40153, and continuous metal hinges like # CAM40161 you asked about. There are also different color options for you to choose from. I've attached a link to our page for you. If you are looking for a cover for the lid/cover...
    view full answer...
  • Old Jensen Vent Cover Replacement Recommendation
    Actually the two part numbers you referenced are the same and are now known as the part # 61628. As long as the hinge of your roof vent looks like the same thing as the hinge style of this cover then it would fit and work well. There are 3 well known hinge styles for roof vents, this is one of them. I wasn't able to find any info on the 65487 cover.
    view full answer...
  • Replacement Vent Cover Recommendation for a 2000 Sundowner Trailer Valuelite 2 Horse Trailer
    Most all vent covers are similarly sized. You will need to select the vent cover for the vent on your trailer by the manufacturer of the vent and the attachment style of the cover. It is hard to say. Some of the vent cover manufacturers, like Ventline, have changed attachment hardware in the past and there are two styles. The newer style, like the Ventline Replacement White Dome Assembly, item # BV0554-01 , that you selected have the metal groove riveted to the back of the cover and...
    view full answer...
  • How to Determine the Right Replacement Vent Cover for a 2003 Sundowner Valuelite
    To determine if any of the vent covers that we carry will fit the vent on your trailer, you will need to look at a few things. First, look at the opening size the vent assembly fits in which you have indicated is 14 inches square, so that's step 1. Next look at the hinge type. The hinge type is important to get the right replacement lid. The pictures on the product pages contain pictures of the hinges so you can compare them to what is on the trailer. There may also be a model number...
    view full answer...
  • Jensen Roof Vent Cover Availability
    We have several vents that can be used as a replacement for Jensen vents. However, you will need to look at the images on the product pages, linked for you, and the dimensions of the opening the entire vent assembly fits in, not just the opening that the lid covers. The part numbers are: # 61628 # 62008 # 69284 # 63112
    view full answer...
  • How to Determine Correct Replacement Vent Cover for 28 ft Enclosed Cargo Trailer
    To determine the correct replacement vent cover for your 28 ft trailer you'll need to get on the roof and see what kind of hinge system your vent lids have. I am attaching a photo of the 4 hinge types (3-point, 4-point, plastic continuous, and metal continuous) so that you know what to look for when you get up there. Once you know what you have you can either let me know, send me a pic, or filter through the attached selection that we have. The 2 most popular options are the 3-Point...
    view full answer...
  • How to Remove the Hinge Pin to Replace the Roof Vent Cover of a Jensen Roof Vent
    I spoke to my contact at Ventmate and he informed me that to remove the hinge pin from your old cover you will need to remove the screws from the ends of the hinge pin and then you will be able to slide the pin out. A replacement pin does not come with the Vent Cover for Jensen Roof Vents # 61628. You should be able to reuse the old one that is on your vent now.
    view full answer...
  • Roof Vent Replacement Recommendation for 2014 Rockwood 1640LTD
    I really appreciate you getting me a picture of the roof vent lid you have on your trailer but since we don't have anything that matches what you sent in your best option will be to replace the entire roof vent like with the Ventline Ventadome part # V2092SP-28. This will fit the same roof opening dimensions you have currently and will give you an all new setup that will work great.
    view full answer...
  • Replacement Vent Lid Cover for 2003 Cargo Trailer
    Vent covers like the Vent Cover for Jensen Trailer Roof Vents - White # 61628 are almost all the same size. The industry standard vent is 14-1/4 by 14-1/4 inches and is often referred to simply as a 14x14 vent. The covers vary most on hinge style. I've linked a page to all your options and have attached a photo of all the traditional vent hinge styles. Once you have the hinge style, then you can see if the lift location matches your vent. If you need further help, sent me a photo...
    view full answer...
  • Picking Out Replacement Roof Vent Lid on Camper Trailer
    Thank you for the picture of your roof vent! From that I can tell the correct replacement is the part # BV0554-01 as you have the old style of dome vent from Ventline. I attached an install video for this for you to check out as well.
    view full answer...
  • Roof Vent Replacement for Roof that Has 5 Point Lid
    You are second person this week with that style of roof vent that has asked for a lid. I wish we had a replacement for it but the 5 point hinge is not a style we offer so you'd have to replace the entire thing with something like the part # V2094SP-28 which fits the same roof opening you have now. For an install kit you'd also need the # 344270KITW which includes mounting hardware and sealant.
    view full answer...
  • Roof Vent Cover for 1998 Haulmark Trailer
    In order to determine which vent cover is going to work on your 1998 Haulmark trailer, we'll need to determine what type of hinge you have on your old one; the good news is that your 14.5" x 14.5" is the standard, so a replacement will be easy to find once we have that information. If you have a continuous metal hinge on your current vent cover, the Vent Cover for Ventline Old Style Rounded Dome Trailer Vents # BV0554-01 will work for you. It could be possible that your vent has a 3...
    view full answer...
  • How to Determine Correct Vent Cover or Replacement Lid for Cargo Trailer
    We have vent covers which will work for you although there is no type of database available with specific parts for each year, make and model of trailer; due to this you just need to take a look at your vent to find out which cover will work for you. The standard roof vent measures 14-1/4" x 14-1/4" so if you measure yours it is likely to be that and you can use the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500WH (White) or # FVU1500BL (Black). If you were instead asking...
    view full answer...
  • Replacing a 14 x 14 Vent Lid on a 1985 Kit Companion
    The 14 x 14 measurement is a good place to start, but to determine the exact replacement vent lid you need, look at the hinge type you have. It will be a three-point hinge, a four-point hinge, or a continuous hinge. For a three-point hinge measuring 14 x 14, you would want replacement lid # 69284 or # CAM40153 Your options for a four-point hinge which measures 14 x 14 are # 61628, # CAM40154, or # CAM40160. The continuous hinges which measure 14 x 14 are # CAM40161, # CAM40155,...
    view full answer...

Do you have a question about this RV Vents and Fan?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-8924