1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. Vent
  5. With 12V Fan
  6. Manual Lift
Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke

Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke

lowest price pledge
Retail:$129.67
Our Price: $119.71
You Save: $9.96
RV Vents and Fans
This item qualifies for Free Shipping
Shipping Weight: 2 lbs
Quantity: 
In Stock
VP-543SP - Vent Ventline Roof Vent
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Is this right for you? Product Expert Adam Y says:

Yes, if you:

  • Want a more low-profile vent for smaller areas like a bathroom or kitchen
  • Prefer to buy American

No, if you:

  • Want the option to use your fan in the rain without getting the inside of your RV wet
  • Could use a handy night light for when you or your kids get up for a midnight snack or drink
This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Rounded, plastic vent cover opens and closes with the simple spin of a handle. Lowest Prices for the best rv vents and fans from Ventline. Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke part number VP-543SP can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (184)
  • Q & A (109)
  • Photos
  • Why etrailer?

Ventline RV Vents and Fans

  • Roof Vent
  • Vent
  • With 12V Fan
  • Ventline
  • Manual Lift
  • Tinted
  • 6-1/4 Inch Diameter

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Rounded, plastic vent cover opens and closes with the simple spin of a handle.


Features:

  • Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
  • Efficient 12-volt centrifugal blower design
    • Draws only 1-1/2 amps yet moves 100 CFM - low demand on battery
    • Quiet operation
  • Easy, one-handed opening and closing of dome
  • Translucent cover allows some light through
  • Fan uses 12-volt DC power
  • Low-profile plastic dome
  • Butt connectors and ring terminals sold separately
  • Made in the USA


Specs:

  • Fan power: 12-volt DC
    • 100 CFM
  • Cover color: Smoke
  • Rough opening size: 6-1/4" diameter
  • Vent extends above roof:
    • 2-3/8" Closed
    • 3-1/4" Open
  • 2-Year warranty



Notes:

  • Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
  • Not for use above tubs, showers or range cooking surfaces.

VP-543SP roof vent

Installation Instructions

  1. Cut a 6-1/4" diameter rough opening through roof. (You can use the smaller diameter of the ceiling garnish as a template.)
  2. Remove the two screws from the roof cap and then take off the cap for access to the mounting holes.
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Make electrical connections.
  5. Insert vent into the rough opening and align it correctly with the trailer. The flange is stamped "FRONT" on the part that should be oriented toward the front of the trailer or RV.
  6. Mount to roof with #8 screws.
  7. Insert ceiling garnish into opening and attach with #8 screws.


VP-543SP Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke

Item # VP-543SP






Customer Reviews

Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke - VP-543SP

Average Customer Rating:  4.7 out of 5 stars   (184 Customer Reviews)

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Rounded, plastic vent cover opens and closes with the simple spin of a handle.

- VP-543SP
by:

The fan arrived in a timely fashion in new undamaged condition, was east to install. Very happy with my purchase. 699634



- VP-543SP
by:

Perfect replacement for the original. When in without a problem. Well made still runs and quieter than the original. Will do business with you again. Thank you. 698369



- VP-543SP
by:

I haven't really used it enough yet as we are still working on inside of Van. I do notice I would like the vent to be 2-3 inches bigger. I like the style a lot. Would like it to be made of stronger material. 681021



- VP-543SP
by:

I appreciate the efforts by NickyK on my behalf to arrange the order and shipment so professionally. It was easy to work with your company and I will do so in the future as my customers have other needs for your type of products. 710591



- VP-543SP
by:

Works just like it is supposed to work. Easy to install, runs quietly. First replacement of one we used for 20 years. 519811



- VP-543SP
by:

Great weatherproof ventilation solution. Good air flow and simple install. 730176



- VP-543SP
by:

Received item via UPS late pm on 11/9/17. Installed it yesterday pm. Took approx. 2 hours to complete project. Took much longer to remove old ventilator than to install new one, as the old one was original on 35 year old Air Stream. Perfect replacement and works perfectly. Those that order this need to know that there is NO hardware included and you should use stainless steel screws to mount item onto trailer for long term use. These are available at any [local hardware store]. Very satisfied customer. 451148


Comments
Thanks for the review Ronnie, I did want to let you know that wiring connectors and installation screws and sealer are not included. Installation Kit # RVIKIT100
Installation Kit - for Ventline Ventadome Trailer Roof Vents - with Screws and Sealant
$33.82
, which includes all necessary screws and sealer to install vent.
-- Rachael H - 11/14/2017

30800

- VP-543SP
by:

A direct replacement for the original bathroom vent in my 20 yr old Airstream. Very easy installation. Nice product. The improvements incorporated into the new one make it much quieter and it moves more air than the original. 548226



- VP-543SP
by:

Hello all. I have a 1973 Apache Pop up, the original vent was missing so I looked online for a replacement and I came across this ventline vanaire roof vent, the vent fit perfectly in the original location of the old vent . This pop up has hard sides when you bring the roof down the side walls meet in the center but leave a gap between each other the handle for the vent fits perfectly in the gap. This memorial weekend we vacationed at Lake Isabella and it gets windy when the vent was closed it stayed closed no matter how strong the wind was. It was a success and worked perfectly. Thanks and I am a happy camper. 254197


Comments
A year later and Everything works perfect still looks new. Never had a problem , no leaks no noises all around a perfect product thanks. I forget its on cause its so quiet ??.
Victor Y - 05/31/2017

24434

- VP-543SP
by:

Needed to replace an older model of this item. I was surprised to see that this was almost all plastic with a very small motor, compared to the metal housing and more substantial motor on to older model. Installation was simple, fit perfectly in old installation hole. Items works well.... 294760



- VP-543SP
by:

This little fan is working absolutely perfect in my homebuilt teardrop trailer. It's small size and low profile make it perfect for this project. It would even open if I installed a roof rack which is the main reason I avoided the larger 12x12 roof vent fans not to mention it was a fraction of the cost. It looks great and works excellent. Hot evenings are not an issue with this fan providing great ventilation, drawing heat out the roof and pulling in cool air through the doors. I highly recommend this fan. It was extremely easy to install and seals up tight with no leaks or issues of any kind. 543685



- VP-543SP
by:

My son finally got the roof vent hooked up he ordered from you, he hooked it up with a solar panel in the back of his 86' suburban to get more air back there. 24341



- VP-543SP
by:

Our hunt club has 2 pit blinds that are used for waterfowl hunting. Each blind is essentially a concrete box with walls, floor and top 4 inches thick and dimensions of 12'x5'x5'. Each blind is buried to a depth of 5 foot to where the top is flush with ground level. Access is through the top using 24 inch wide manhole lids that are made of high density plastic. The cooler air inside of the blinds clashing with warmer air absorbed by the concrete and manhole lids at ground level caused condensation that made the inside damp and smelly. We only hunt 3 months each year, so needed a vent solution for the other 9 months the blinds were not in use. We also needed something that could be powered by DC voltage from a solar panel due to the remote location. In July 2015 we installed each fan into a manhole cover and used water-tight conduit and electrical boxes to run the wiring from the solar panel to each fan. Great solution! Once enough daylight hits the solar panel the fan blades start moving and run constantly until sundown. Will see how long these things last but so far so good 228520


Comments
It has been a trial and error experience this past year, but now believe we have things figured out. We outsmarted ourselves and upped the wattage of the solar panel array this spring to run a pump and the fans, but didnt properly calculate the impact that would have on the fans. Bottom line, we sent too much juice to the fans and fried the motors. Luckily, etrailer sold replacement motors. Replacement was a breeze, and lesson learned. After that we split the solar panel array and now the correct voltage and amps are being used and no issues whatsoever. We also had a battle with mice getting inside the fan housing when not operating and making nests, which was a real mess. Solved that by opening the adjustable fan housing just enough to circulate air but not enough for Mickey and his friends to make a condo in the fan housing. Knock wood, the lessons learned this past year should make for trouble free operation from now on. I know that we are not using these vent fans in vehicles, campers or trailers as the majority of you do or intend to do. If we can make these fans do the job in our application, using these fans as intended in a vehicle, camper or trailer using a 12 volt battery and not solar panels and staying clear of rodents should be a breeze.
Bobby D - 09/29/2016

21311

- VP-543SP
by:

Exact replacement for the bathroom fan in my 33 year old Airstream Excella. Only problem was a delay in collecting the package at the post office - there was no name (i.e. mine) on the shipping label so I had to return with the tracking number. Installed and working fine. 897557



- VP-543SP
by:

This is my third for my van. I have two on top of the roof and this one will replace a dryer vent on my back door. They are good vents. I have not wired the fans yet, but even so they work well. 893037



- VP-543SP
by: 09/01/2020

Great product! Made very well and is just as described. 881713



- VP-543SP
by:

Shipped fast and works great! 869419



- VP-543SP
by:

Good product 845110



- VP-543SP
by:

perfect for Apache camper 844980



- VP-543SP
by:

works like it is supposed to 844880



- VP-543SP
by:

Just installed the Ventline 6 1/4 fan in my horse trailer. Simple easy and works great. 844472



- VP-543SP
by:

Thank you! Great product, was able to install as a replacement for my Taxa Tiger moth 2018 exhaust fan. Thanks! 819183



- VP-543SP
by:

The vent/fan is working great. Your website had a clear detailed photo and description of the fan, so I was confident I was ordering the correct item. Thanks a lot for having an exact replacement. A quality item. 814818



- VP-543SP
by:

Sparkling Customer Service! 796453



- VP-543SP
by:

Great product fits and looks great 784216


44
209
Show More Reviews

Ask the Experts about this Ventline RV Vents and Fans

  • How to Remove Rotary Switch from Ventline Vanair Trailer Roof Vent
    The switch design for the Ventline Vanair Trailer Roof Vent part # VP-543SP has since changed from the rotary style you have to the push button design referenced in the video. I called and spoke with an engineering contact at the Ventline division of Dexter Axle and they informed me that in order to remove the switch you need to trace the two wires up and remove them at the source rather than the switch. There is one wire that goes to the motor and the other goes to the rv's power circuit....
    view full answer...
  • Recommended Roof Vent for Shallow Clearance Application on Sprinter Van
    The Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke # VP-543SP will allow you to move air at 100 cubic feet per minute. For the low profile ability, these are really your best bet. To feel the air moving, with the windows cracked you will want two instead of one. If you go with the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-04500K you will move much more air with a 900 cubic feet per minute fan, but you will...
    view full answer...
  • Reading Lamp Recommendation for Small Teardrop Camper
    For a reading lamp, I'd recommend the Command Electronics # CE46FR. The light provided comes in at 3500 Kelvin on the Kelvin lighting scale and is described as 'warm white' which is suitable for the situations where you don't want something really bright like task lighting. For cards and reading, I believe the # CE46FR would be perfect for you. Even cooler is the fact that the lamp offers a USB port for charging your phone or e-reader and a dim night light so you can easily find the switch...
    view full answer...
  • Roof Thickness Requirement To Install Ventline Vanair Trailer Roof Vent On Enclosed Cargo Trailer
    The Ventline Vanair Trailer Roof Vent w/ 12V Fan vent part # VP-543SP is designed for roof 1-1/2" to 2-1/2" thick. The vent is designed for enclosed trailers so you shouldn't have an issue installing it on your aluminum roof as long as it's 1-1/2" thick. It also requires a 6-1/4" Diameter cut out and a 12V power source. A lot of customers use these vents on truck bed campers and aluminum enclosed trailers with thinner roofs. I recommend to also take a look at the attached video that includes...
    view full answer...
  • Replacement Foam Ring for Ventline Vanair Trailer Roof Vent Part # VP-543SP
    The foam ring on the Ventline Vanair Trailer Roof Vent part # VP-543SP is a weather seal that is used to help seal the dome on the fan assembly. If you continue to use the fan without the foam ring you would be subjected to leaks which could then short out the motor. If I had to guess I would say that the wax paper was not fully removed from the ring which then caused adhesion problems. Unfortunately, we do not offer the foam ring separately but we do offer the Replacement Plastic Dome...
    view full answer...
  • Recommended Round Trailer Vent For 345RL Open Range Trailer
    Depending on the sealant that was used for the installation of the roof vent you have in your attic, you will probably need a putty knife to remove the old sealant. Some of the sealants used can be pretty tough to take off. We carry one round vent for trailers and it has a fan included. This is part # VP-543SP. The rough opening size needed for this vent is 6-1/4 inches. For the installation of a vent we recommend a kit like part # 344270KITW. This includes the screws, Butyl tape,...
    view full answer...
  • Fan Blade Replacement Recommendation for Ventline Vanair Trailer Roof Vent # BVD0217-00
    Yes we do. The fan blade part number you need is the # BVD0217-00 which is correct for the Ventline Vanair Trailer Roof Vent # VP-543SP that you referenced.
    view full answer...
  • Will Ventline Vanair Trailer Roof Vent Rain Proof
    The Ventline Vanair Trailer Roof Vent with 12V Fan # VP-543SP is not going to be completely rain proof (no roof top vent will be), because they need to be open somewhat, as you can see in the accompanying photo a customer sent in of this vent installed. Though I do recommend closing this vent in the rain, you can add ventilation by installing a vent on the sides of your van. The 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole # HMAV2-AVT2 (Black) or # WHMAV2-WAVT2 (White) will...
    view full answer...
  • What Fan Motor Comes in the Ventline Vanair Trailer Roof Vent # VP-543SP
    The Replacement 12-Volt DC Fan Motor # BVD0218-00 that you mentioned has been around and in the Ventline Vanair Trailer Roof Vent # VP-543SP for a long enough time that there wouldn't be any chance of you getting an older style motor in this vent if you ordered it. Also, if the motor is the problem in your vent you could just replace it with the # BVD0218-00.
    view full answer...
  • Replacement Bathroom Vent for Philips/Ventline V2065 Bathroom Exhaust Vent in 1992 Schultz Trailer
    Since your trailer's original bathroom vent fan is now 25 years old its motor could very well be past its useful lifespan. I agree that at this point complete replacement of the entire vent unit is the sensible way to go. We carry a wide range of RV vents that are shown on the linked page. You will want to match up the shape and dimensions of your existing bathroom vent to the replacements we have. For a round vent with 12V fan we offer the Ventline # VP-543SP which is 6-1/4-inch...
    view full answer...
  • Can 6-1/4 Diameter Ventline Vanair Trailer Roof Vent be Installed on the Wall
    Although I'm sure you could mount the Ventline Vanair Trailer Roof Vent # VP-543SP vertically on your wall, when I reached out to my contact at Ventline he said that it wasn't built to function that way so it may not operate properly. You could instead install a wall vent like part # 9139, # HMAV2-AVT2, or # WHMAV2-WAVT2 to help promote airflow if you don't want to/don't have room for an electric vent on your roof.
    view full answer...
  • Best Installation Sealant for Ventline Roof Vent VP-543SP for Most Water-Resistant Performance
    The degree of protection from moisture when installing the Ventline Vanair Roof Vent with 12V Fan # VP-543SP will really depend on making seamless contact between the vent's mounting surface and the surfaces on the Transit Connect. The best install comes from using a flexible pure silicone caulk adhesive, such as white caulk # 0160297. Most hardware stores will offer a pure silicone caulk like this in a range of colors, even clear, so you may be able to source some locally that better...
    view full answer...
  • Can Direction of Air Flow on Ventline Vanair Trailer Roof Vent Fan part # VP-543SP be Reversed
    We've spoken with Ventline and if you reverse the polarity of the wiring on the Ventline Vanair Trailer Roof Vent w/ 12V Fan part # VP-543SP you can reverse the direction of the fan. If you wanted a switch to change the direction you'd need a DPDT switch found locally at a hardware store.
    view full answer...
  • Replacement Parts for Bedroom and Bathroom Vent Fans in Motor Coach
    If you need multiple replacement parts for the vents in your coach it may be less costly - and certainly will be easier - to replace the entire units in one step rather than to identify and gather up all of the replacement parts needed. Also, it often happens that when a device is older and needs work that once you get into it you'll find other issues that were not visible. If the units have served you well for a good number of years I suggest you just replace them since that way you will...
    view full answer...
  • Replacement Motor and Diagram for Ventline Vanair Trailer Roof Vent
    The correct replacement motor for the Vanair Roof Vent part # VP-543SP that you referenced is the part # BVD0218-00. I attached a diagram that covers how it all comes apart for you to check out which should help you in getting out the old vent to install the new one. I also attached install instructions for the motor for additional reference although you may not need them.
    view full answer...
  • Thickness of Roof for the Ventline Vanair Trailer Roof Vent Part # VP-543SP
    The Ventline Vanair Trailer Roof Vent part # VP-543SP will fit a roof from 1-1/2" - 2-1/2" thick out of the box. Since you have a 3-1/4" thick roof then you will need to use the Replacement Garnish Extension Ring for Ventline Vanair Trailer Roof Vent part # BVA0228-01-46 which allows for a roof from 2-1/2" - 3-1/2" thick. I also recommend using the part # 344270KITW which comes with everything you need for installation.
    view full answer...
  • Ventline Vanair Trailer Roof Vent Dimensions and Weight
    The Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke # VP-543SP is very light weighing just under 2 pounds each. I recommend using installation kit # 344270KITW for mounting this vent. I've attached some videos as well as some dimensions of this unit to assist.
    view full answer...
  • Installing Ventline Vanair Trailer Roof Vent On 2014 Nissan NV200 Roof with Ridges
    In order to seal the Ventline Vanair Trailer Roof Vent # VP-543SP on your 2014 Nissan NV200 I recommend using the sealant that comes in the Installation Kit # 344270KITW. This sealant is waterproof and will keep the elements out of your van. The sealant will fill the space between the roof of your van and the vent. I spoke with Ventline about installing the Vanair on a cargo van with a ridged roof. They do not have any recommendations or suggestions for installing the vent on the roof...
    view full answer...
  • Does Ventline Vanair Trailer Roof Vent w/ 12V Fan # VP-543SP Leak Water
    The Ventline Vanair Trailer Roof Vent w/ 12V Fan # VP-543SP that you referenced does not have a reputation as leaking. We've actually had quite a few people report back to us that it did not leak at all. Was the vent open when it was raining? If it was closed it should have not leaked through the mesh.
    view full answer...
  • What is the Exterior Diameter of Ventline Vanair 12-Volt Trailer Roof Vent # VP-543SP
    I pulled a sample of the Ventline Vanair 12-Volt Trailer Roof Vent # VP-543SP from our warehouse in order to take measurements for you. These key measurements are shown on the linked photo that I have edited for you. The diameter of the widest part of the black exterior portion is 8-inches so it appears that it may be too big for your application. This 12V powered fan is intended for a trailer roof with a rough opening of 6-1/4-inches. Please note that it does not include the necessary...
    view full answer...
  • Installation Instructions for the Ventline Powered Vanair Trailer Roof Vent # VP-543SP
    The installation instructions for the Ventline Vanair Trailer Roof Vent # VP-543SP that you referenced are included in the box and are as follows: 1.Cut a 6-1/4" diameter rough opening through roof. (You can use the smaller diameter of the ceiling garnish as a template.) 2.Remove the two screws from the roof cap and then take off the cap for access to the mounting holes. 3.Apply sealant to bottom of flange. Be sure to surround each screw hole. 4.Make electrical connections. 5.Insert...
    view full answer...
  • Trailer Roof Vent that will Reverse to Blow Air Into Trailer
    The Ventline Vanair Trailer Roof Vent # VP-543SP is not a reversible fan. You can reverse the wiring and it will spin the blade clockwise. However, the design of that blade will not cause the air movement to reverse only be less effective going in the same direction. For a fan that is reversible you can use the Fan-Tastic Vent Roof Vent # FV801250.
    view full answer...
  • Is Passive Inlet Vent Needed With Ventline Powered Vent in Camper Shell?
    When installing the Ventline Vanair Trailer Roof Vent # VP-543SP a passive inlet vent such as # HMAV2-AVT2 certainly would not hurt though it is likely not necessary, though it would be difficult to say for sure without knowing the rest of your ventilation, the size of the camper and how much condensation you are likely to produce. In regards to your question about the spacer, you are correct that a spacer will be needed for the thin camper shell. I've added links to video reviews...
    view full answer...
  • Can the Ventline Vanair Trailer Roof Vent Be Mounted on the Side of a Trailer
    I spoke with my contact at Ventline and he informed me that this Ventline Vanair Trailer Roof Vent # VP-543SP is only to be mounted on the roof of a trailer. The reason is because if it was mounted on the side it would most likely leak water.
    view full answer...
  • Will Reversing the Wiring on Vent Fan VP-543SP Cause the Motor to Run in Reverse
    If you were to swap the positive and negative wires on the motor for vent fan # VP-543SP the motor would run in reverse. I have tested this before. Of course it is not tested in this configuration so proceed at your discretion.
    view full answer...
  • How much of the Ventline Vanair Trailer Roof Vent Will Stick Inside of the Trailer
    If you remove the garnish that comes with the vent # VP-543SP and measure from the bottom of the base that mounts to the top of the roof down it is 1-3/8 inches to the bottom of the main housing and 3-3/4 inches to the bottom of the handle (with the vent closed). I made a video that shows where these measurements are being made.
    view full answer...
  • Replacing Handle of a VanAir Vent part # VP-543SP
    The replacement handle for the VanAir Vent part # VP-543SP that you referenced is the part # BVA0207-05. I attached a diagram that points out where the components of the replacement handle are in relation to the vent. Looks like you would need to pull the handle down far enough to allow access to the screws on either side of the handle. If you cannot pull the handle down far enough to give you access to the screws you would need to remove the vent so that you can get to them.
    view full answer...
  • Will Ventline Vanair 12-Volt Trailer Roof Vent # VP-543SP Fit Curved Roof of a Ford Transit Connect
    The slight curve of your van roof should not be an issue given that the Ventline Vanair 12-Volt Trailer Roof Vent # VP-543SP is a smaller unit. As such the curvature of the roof in the area where you mount the fan will not be a factor. This fan has numerous diameters depending on where you are measuring. Luckily another Expert took a bunch of these measurements and I have included a picture showing them for you.
    view full answer...

Do you have a question about this RV Vents and Fan?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Raymond P
Video Edited:
Kathleen M
Updated by:
Sarah W
Updated by:
Adam Y
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.