1. RV Vents and Fans
  2. Ventline
  3. Roof Vent
  4. Vent Assembly
  5. 14W x 14L Inch
  6. No Fan
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Item # V2092SP-28
lowest price pledge
Retail:$55.53
Our Price: $39.95
You Save: 28%
RV Vents and Fans
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
Quantity: 
In Stock, Ships Today
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank. Lowest Prices for the best rv vents and fans from Ventline. Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White part number V2092SP-28 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (398)
  • Q & A (148)
  • Videos (2)
  • Photos
  • Why etrailer?

Ventline RV Vents and Fans - V2092SP-28

  • Roof Vent
  • Vent Assembly
  • Ventline
  • 14W x 14L Inch
  • No Fan
  • White
  • Manual Lift

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.


Features:

  • Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure
  • Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring
  • Translucent cover allows some light through
  • Aerodynamic, wedge-shaped dome made of durable polypropylene
  • Galvanized steel roof flange won't rust or corrode
  • Snap-out screen is easy to clean
  • Polar White interior trim piece (or garnish) is included
  • Made in the USA


Specs:

  • Included garnish fits roofs 1-7/8" to 3" thick
    • Garnish leg length (depth): 2-1/8"
    • Garnish color: Polar White
    • Other garnish sizes are available (sold separately)
  • Cover color: white
  • Rough opening size: 14-1/4" wide x 14-1/4" long
  • Vent extends above roof:
    • 4-1/2" Closed
    • 10-3/4" Open
  • 2-Year limited warranty



Note: Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.


V2092-28 roof vent



Installation Instructions

  1. Mark desired location for vent. Be sure to choose a location between roof joists.
  2. Cut a 14-1/4" x 14-1/4" opening through roof and ceiling. (Or use existing opening if you're replacing a standard 14-1/4" x 14-1/4" vent.)
  3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
  4. Insert vent through hole with screen frame extending through roof cavity and hinge of vent toward the front of the vehicle.
  5. Mount to roof with #8 screws.
  6. Attach interior garnish piece with #8 screws.


V2092SP-28 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White







Video of Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Ventline Ventadome Trailer Roof Vent Installation

Speaker 1: Today we're going to be taking a look at the Ventline vented dome trailer roof vent in white. It's also available in smoke and with white with the birch trim. To help us with our installation, we're going to be using the vent installation kit, part number 3-4-4-2-7-0-K-I-T-W. Here's what our vent is going to look like once we have it installed. Here, you have a manual vent, so we can simply rotate this knob to close the vent, or if we want to let some of that hot air out of our trailer, we can rotate it the other way, opening the vent up.Now, our Ventline vent is going to be a standard replacement vent, or if you're adding a new vent, just keep in mind you are going to need a 14 and a quarter by 14 and a quarter square hole. It is going to have this removable screen, which is going to keep a lot the bugs, dirt, and other kind of debris from falling inside our trailer.

But also be extremely easy to remove and clean, if we need to.If you're looking to replace your broken vent, or upgrade your camper or trailer with a new vent, our Ventline vented dome vent is going to be a great choice. It's going to have that cover to keep all that rain and debris out, but also, again, allowing a little bit of light in and all that fresh air to come in and that stale air to escape. The cover on top is going to be semi-transparent, so it is going to allow some sunlight in, even when the lid is closed. As you can see, this one has a white lid on it, but it's also available in smoke, so it's going to be like a translucent black. It still will have a little bit of light coming through, but not as much as the white one.Now, with the lid closed, at the highest point, it's going to be right about five inches.

And with the lid fully open, at the highest point, it's going to be right about nine and a half inches. Now that we've seen what our vent looks like and gone over some of the features, let's show you how to get it installed.Speaking of installation, we're going to want to take out the interior garnish piece that's on our existing vent. As you can see, if we look up, our vent is broken and that's going to be why we're replacing it. Typically, we're going to have four fasteners holding the garnish in, but there's going to be a few more on this one, just because, as you can see, the garnish is cracking. They added a few more screws to try to prolong replacing it and keep it from coming down.Now, at the top, where our roof vent mounts, we're going to need to peel up all this sealant going around our vent, so we can get access to the screws that are holding it in place.

You can use a putty knife or anything you have available, but we're going to want to scrap up all that sealant going all the way around the vent. When you're taking it up, you want to be careful not to cut into the roof itself, or the membrane that's on the roof. You just want to take the sealant up and try your best not to damage anything else.Now that all this sealant is peeled away off of our vent, we're going to remove each one of the fasteners that's holding it down. With all the fasteners removed, it maybe a little bit difficult to peel up that vent, because there's probably some sealant, so if you can get your hand underneath one of the corners and we could peel it up, and remove it. Then we're going to want to clean this area off, scraping off any of that excess sealant and residue, so we have a nice clean surface to work with.

Again, just using a putty knife, or a scraper of some kind, just go around the edge of the mounting surface and clean off any of that excess residue.You can go ahead and grab the vent now and we want to make sure that the bottom edge is going seal nicely to the roof. That way, we don't have to worry about any kind of leaks. We can take our butyl tape, and it is going to be rolled up, so just take our roll, unroll a little bit. We're going to start at one corner and just push down going along the edge here. Once we get to the other side we can go ahead and tear a piece off. We're just going to repeat that for all the four edges. Just go down, going along the edge until we get to the other side. We can leave the backing on until we get ready to put it in place, that way we don't have to deal with it too much and worry about getting it on our hands, or anything like that.Now we just want to peel up the backing and remove it, and make sure that the butyl tape is still stuck to the vent. That's all right if you have a little bit of overlap, it will squish out once we put the vent down and it will seal up nicely. Now if we bring our vent upright, where the lid is going to be on top. We will see that there is going to be an arrow, so we want to make sure that, that arrow, is pointing towards the front when we put this in place. We'll take our vent, line it up in the hole in the roof, make sure that it goes all the way in the hole on all four corners. I'm just going to go around, just pressing it slightly into place. Then we can work on getting our hardware in.I'll be taking a number eight sheet metal screw and going into each one of the holes going around the perimeter of the vent. Again, it's all right if that butyl tape starts to come out. That way, we know we're going to have a good seal. And it will start to squish out around the edge as we start to screw it down. With all the hardware in place around the vent, it's securely attached. We want to make sure there's no leaks, so we're going to come back with the self-leveling sealant and we're going to make sure to cover up the bolt holes, as well as that outside flange. This is going in a zigzag motion going across. As you can see with the sealant, after only a few minutes, it is going to start to disburse and start to level itself out, so it's going to fill in all these little gaps on its own without having to go around with a putty knife and smooth it out. Once it dries, it is going to be paintable, but still remain flexible and it is going to adhere to most surfaces, like aluminum, wood, and even concrete.If you remember, our garnish was cracked and broken in a few spots, but our vent is going to come with a new one. This one is in white, but it is also available in birch, so it can match the interior. We're just going to slide our garnish in place. Now you may have to trim yours and you may have to add a piece of wood or something if it isn't deep enough. But once we have it loosely in place, we're going to take four of the wood screws and we're going to put one in each corner going directly into the ceiling. I'll get one started. I'm going to go to the opposite corner. To tighten these down, you just want them to be snug, so that the garnish isn't moving around. Because you don't want to go too much to where you're going to crack it. With our garnish in place, we can go ahead and turn the knob on our vent to open it up, allow some fresh air to come in.That will finish up your look at the Ventline vented dome trailer roof vent.


Customer Reviews

Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White - V2092SP-28

Average Customer Rating:  4.7 out of 5 stars   (398 Customer Reviews)

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.

- V2092SP-28
by:

Sorry about being so late with the review. The vent fit perfectly and was easy to install. works great. I have done business with E-trailer before and will do so again if the occasion arises. Thanks. 730431



- V2092SP-28
by:

I was pleased and surprised when installing the new vent, that it was not only a perfect fit in the opening in the camper roof, but the screw holes in the flange lined up precisely with the holes from the previous unit I had removed! This may be because there is some kind of industry standard on hatch flange layouts, or I just got lucky. But boy, did that make the install simple and fast. I ran out of my Dicor Self-leveling sealant, before getting completely around the unit, but the job is virtually done and the new vent looks great! 725471



- V2092SP-28
by:

After years of use, the existing vent on my enclosed trailer finally met its maker by way of a falling branch, and maybe a few spots of rust around the perimeter. A quick search on the Etrailer website had the new one at my doorstep is no time. The tough part was taking off the old vent. But after a little elbow grease it came right off. I had watched an installation video by etrailer prior to my purchase to make sure I had all the necessary supplies, butyl tape and dicor. It went it without issue and looks great. Thanks Etrailer! 729883



- V2092SP-28
by:

Fast service and item was as described. 554109



- V2092SP-28
by:

I am replacing the original roof vent on my 1960's camper. Difference in quality or materials is astounding. Now I am planning to take parts from the new unit (dome and screen) and use them with the older heavy duty frame. Otherwise the ordering and delivery went smoothly. 555011



- V2092SP-28
by:

The trailer roof vent looks good, works great and was simple and easy to install. Good value. 571154



- V2092SP-28
by:

Due to packing of shipment, heavy items were put on top of vent and vent plastic was cracked 433079



- V2092SP-28
by:

I recently purchased two ventadomes with install kits. Great price for the product and nice to have the videos to gain an understanding of the install. Now that I am well practiced my only advice is to not use the pre drilled holes on the hinge side as they are aligned with the position of the hinge points. Not a big deal but would have had less caulk on my hands and on the dome if I knew that ahead of time. Second vent when much better. 548370



- V2092SP-28
by:

With a fresh watertight seal, we're ready to roll. When my original order presented a challenge, Etrailer associates graciously created a timely and successful solution. I know I'll need more parts for my trailer, and I now know exactly where to find them. 584703



- V2092SP-28
by:

Great as a replacement for my old ventline that was destroyed by the burglar using it to gain entrance into our travel trailer. It is an updated design with plastic on plastic for the slide used when opening/closing the vent. Works very smoothly, no more chatter. 110294



- V2092SP-28
by:

Arrived in good time and the product/ repair worked perfectly! Easier than I thought! Note: I painted the metal flange. 658053



- V2092SP-28
by:

Used on older Jayco Qwest pop-up. Some trimming required on height of inside trim ring, otherwise perfect fit. Holes lined up with original and operates wonderful. A gasket would be helpful, but caulk or plumbers puddy does the trick. 572310



- V2092SP-28
by:

Delivery was timely and arrived complete and intact. The Vent dome kit fit perfectly and I was able to install the assembly in a short time with excellent results. I will definitely return to e trailer for future projects. 100300



- V2092SP-28
by:

I am glad I came upon this site. The staff is friendly courteous and helpful. Since I live in Canada it is a big problem if I had to send items back across the border to etrailer if the items were not what I thought they were. The short videos that etrailer provides with each product is extremely helpful in determining to purchase or not. Thank you for that feature. Knowing a little about video production and the costs associated with that, it must cost etrailer a pile to give us (the consumers) what appears to be a simple addition on their site Thanks again guys/gals 396626



- V2092SP-28
by:

Easy installation. Great for daytime light, and ventilation. 259781



- V2092SP-28
by:

Delivered early. Outstanding service. I will use them again for all my trailer needs. 443067


Comments
Still no leaks.
Scott E - 10/17/2018

44739

- V2092SP-28
by:

Received the vent faster than expected, installed is and work great! Removed the old vent and installed this unit, fits great and the screen is much better than the old one. Great price, fast delivery, installed easily. 299975



- V2092SP-28
by:

So far so good! Removel of the old vent, clean up, and install of the new vent took about an hour. After a year of use, it still working great: with no issues. 563952



- V2092SP-28
by:

This product was shipped ok and on time. My only complaints begin with the product its self though. It opens correctly and does the job and the screen also pops off but the plastic feels so cheap that im afraid after time, like a year at best it will need to be replaced again. The manual knob opens the lid but the knob itself has tons of play in it and just feels lose and cheap. The white dome lid or top came with scratches all over it. (do not know if this is from the installation kit just carelessly thrown into the package with my vent or not) but nonetheless it was scratched all over the top of the lid. Also if you buy this DO NOT spend the 20 sum dollars plus shipping on the installation kit. IT IS NOT WORTH IT! go to home depot get some urethane or some self leveling calk or what ever. buy yourself some screws and be done. They got me. Dont let them get you. 425690



- V2092SP-28
by:

This is exactly what I was looking for, with a great price like this ill be able to finish repairing my roof within budget! 550044



- V2092SP-28
by:

I pulled the old one (16 years old) I have to say the new one are junk. I can't see it lasting more than a few years. I was calling around for info on how they were made no one wanted to tell me the new one are flimsy junk. Id pay way more for a well made one. Next time I'm looking for a sturdier brand. People don't always want cheap.. and the manufactures should offer a better model. I'm betting the dome on this won't last 2 years. I'm not blaming you. You sell what they make. But I will email the maker. 611489



- V2092SP-28
by:

Amazingly quick delivery. Product was exactly what was advertised and fit like a glove. Thanks 738505



- V2092SP-28
by:

I wondered how hard it would be to install, but it was very easy to install. No special tools required. I did on a cold day in about a hour and a half. Removed the old one and installed the new one. No leaking. 734357



- V2092SP-28
by:

Great quality and made in the USA. Love the removable screen. Fit perfectly in the hole. However, the shield/cover that screws on from the inside is "shallow" and doesn't quite reach the correct depth. Wondering if my 5th wheel trailer had a thicker roof. 721086



- V2092SP-28
by:

Good product. Fast delivery Very good prices 720472


31
405
Show More Reviews

Ask the Experts about this Ventline RV Vents and Fans

  • Replacement Roof Vent Cover for Lid Marked AS-13M-VDO449 ANS Z26 1
    We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part # BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would want the part # V2092SP-28 for a white lid or part # V2092SP-29 for a smoked lid. The smoked lid would allow more light in.
    view full answer...
  • Side and Roof Vent Options for 5 x 8 Enclosed Trailer
    We carry all sorts of trailer vents and we can help you with a solution to provide proper ventilation in your 5 x 8 trailer. You can use either a roof vent or a side-mount ventilator, or both if you wish. We offer two side-mount ventilators that offer passive air flow, parts # PLR1715 and # PLR20. Side Cowl Ventilator # PLR1715 includes a screen and measures approximately 6 x 11-inches. Ventilator # PLR20 measures approximately 10-1/2 x 12-inches. Both vents allow you to open/close air...
    view full answer...
  • Replacement Trailer Roof Vent and Installation Kit
    Most RV roof vents are the standard 14 x 14-inch size which is the size that replacement lid # BV0554-03 fits. We can help you with just a new lid if that is all you need and we can also supply a whole new vent assembly if you prefer. If you want to install a complete new 14 x 14 vent you can select one from the page I linked. We have manual vents without fans like # V2092SP-28 and both 12V DC-power vents like # MA00-07500K and 110V AC-power units like # V2128SP-01. At the top of the...
    view full answer...
  • How to Select the Correct Replacement Roof Vent and Roof Vent Lid or Cover 2012 Dutchmen Aerolite
    Trailers can come equipped with a variety of vents depending on the options that were selected when it was initially purchased. Dutchmen will normally provide literature on the specific appliance and fan models with the purchase of the trailer. If you no longer have this documentation, we should still be able to help you find a replacement. To replace the entire vent, you will need to measure the existing vent so that you can make sure the replacement will fit in the existing opening....
    view full answer...
  • Replacement Lid for 14 x 14-Inch Trailer Roof Vent
    Thank you for the photo of your R-Vision Trail Lite camper's roof vent. You can use Ventline Old Style Rounded Dome # BV0554-01. If you prefer to replace the entire vent with a new one you can use a kit like Ventline # V2092SP-28 along with install kit # 344270KITW.
    view full answer...
  • Replacement 14 x 14 Trailer Roof Vents and Installation Kit
    Standard square RV roof vents usually measure 14 x 14-inches and typically the roof opening measures very slightly larger than this, about 14-1/4 x 14-1/4. The Ventline vent # V2092SP-28 that you referenced is this 14 x 14-inch size. If your existing roof openings measure 14 x 14 then this vent or any of the similar units we offer will fit well. This particular vent includes a garnish (the interior plastic trim piece that covers the gap between the vent and the roof) which will work...
    view full answer...
  • Replacement Roof Vents and Vent Lids for 2008 Jayco Octane Toy Hauler
    Sorry about Mother Nature giving your trailer a beating. We have both complete standard 14 x 14-inch roof vents as well as just replacement lids in many colors and in the most popular hinge designs. If you care to just replace the lids only (and not have to tear out all three whole vent assemblies) you can refer to the linked photo that shows the four common hinge types for 14 x 14 roof vents. Just match your hinge type and then select that one on the page for replacement lids that...
    view full answer...
  • Replacement Roof Vent for 1992 Palomino Filly Pop-Up Camper
    We have many types of trailer roof vents and vent parts but we do not have a way to look up the vent originally installed in your 1992 Palomino Filly so I suggest confirming the dimensions. Most often square roof vents are 14 x 14-inches and fit roof openings that are generally 14-1/4 x 14-1/4. Based on photos of your pop-up that I could find it appears you do have a 14 x 14 vent so I linked for you our entire range of trailer vents in this size. We have manual vents, 12V powered vents...
    view full answer...
  • Trailer Roof Vent Installation Kits and Sealers
    The Ventline trailer roof vent # V2092SP-28 does not include mounting screws or sealant. The reason is that trailer roofs vary in their materials and thickness and if hardware were to be included it would not work for each and every application. But we do have vent install kits and sealants to help you get the job done. I linked a video to help too. We have vent installation kit # 344270KITW for trailers with a metal roof; this includes both hardware and sealant. We also have a kit for...
    view full answer...
  • Replacement Vent Water Seal for 1976 Trillium 1300 Original Ceiling Vent
    Thanks for the photos. That vent is definitely an original and the Replacement Dome Seal for Ventline Ventadome Trailer Roof Vents # BVD0455-01 will not work for the style a vent you have. If you want to keep your vintage vent then I recommend using weather seal like the UWS Weather Seal Foam for Toolboxes - Per Foot # UWS125FOAM for that flat surface seal. Unfortunately there isn't a specific confirmed fit seal for your style vent, but that is the seal I would use and then monitor for...
    view full answer...
  • Replacement Trailer Roof Vent Recommendation to Replace a Brotherhood Roof Vent
    The Ventline Ventadome Trailer Roof Vent # V2092SP-28 that you referenced is going to be your best option. Most likely when you remove the old vent from your trailer the roof opening is going to be either 14 by 14 inch or 14-1/4 by 14-1/4 inch and this will install easily in it's place Worst case scenario you would have to slightly enlarge the hole to get the vent to fit. I attached an install video for you to check out as well. For an install kit you would want the part # 344270KITW....
    view full answer...
  • Which MaxxAir Roof Vent Cover Fits Ventline Roof Vents # V2128sp-01 or # V2092sp-28
    The vent cover # MA00-933066 is designed to basically fit any roof vent so it would be the one to use with either the part # V2128sp-01 or # V2092sp-28 that you are wanting. The Camco Vent Cover part # CAM40431 is also an option that would work too. The part # MA00-933072 requires a MaxxAir roof vent since it has install brackets that match that roof vent so it would not be the correct part for you to use.
    view full answer...
  • Vent Assembly Replacement For Holiday Rambler Aluma Lite
    Since your 1986 Holiday Rambler Alumalite has the Replacement Dome Assembly for Ventline Ventadome # BVD0449-A01 on it, that means that the following Trailer Roof Vents will fit: The Ventline Ventadome Trailer Roof Vent # V2092SP-28 has a manual lift and does not have a fan. The Ventline Ventadome Trailer Roof Vent # V2094SP-28 has a manual lift and a 12V fan. The Ventline Ventadome Roof Vent # V2119-601-00 has a powered lift and a 12V Fan. The Ventline Roof Vent # V2128SP-01...
    view full answer...
  • Availability of Roof Vent for 13" x 13" Rough Roof Opening
    All of our standard roof vents, such as the Ventline Ventadome # V2092SP-28, are designed to install into a 14" x 14" or 14-1/4" x 14-1/4" rough opening. This is the standard vent size for trailers and RVs so I'm not aware of one that is designed for a 13" square opening. Unfortunately your only option is going to be to try and expand the existing cutout on the trailer to accommodate a new vent like this. This will also make it easier to replace the unit down the line or even upgrade...
    view full answer...
  • Is the Replacement Lid for MaxxAir MaxxFans MA05-30510 Opaque or Translucent
    The Replacement Lid for MaxxAir MaxxFans # MA05-30510 is made of opaque white plastic (not clear plastic). The MaxxFan Deluxe Roof Vent # MA00-05301K that this part fits is a powered vent with a fan/motor assembly. Since that part of the vent would block much of any light that gets through the lid there would not be much value in having a translucent lid on this particular vent. A manual vent that does not have a fan/motor, such as # V2092SP-28 from Ventline, does have a white lid that...
    view full answer...
  • Need Replacement Roof Vents for a SunyBrook Titan 38BQS Trailer
    The size of most roof vents on campers measure at 14-1/4 x 14-1/4 inches. This measurement is the length and width of the vent. The part you referenced # BV0554-03 may be the correct size, but there are different styles of hinges that you will need to know before purchasing. There are 3-point hinges, 4-point hinges, and continuous hinges. Cover # BV0554-03 fits 14-1/4 square roof vents and has a continuous hinge. Unfortunately, there is not a master parts list where I can look up your...
    view full answer...
  • Roof Vent to Install Above Shower
    Since you are needing a vent that sits above your shower you need one that doesn't have power. Roof vents that use electricity, like the MaxxFan Deluxe Roof Vent # MA00-05100K, aren't built to resist the water that would be filtering through if installed above a shower. Because of this I recommend installing the Ventline Ventadome Trailer Roof Vent # V2092SP-28 which operates manually and fits a standard 14" x 14" vent opening. If you would like to leave the vent open when it is raining...
    view full answer...
  • Replacement Trailer Roof Vent for 2013 Forest River Cherokee Wolfpack Toy Hauler
    The majority of square trailer roof vents are the 14 x 14 size shown on the linked page. Other sizes are available too but the vast majority of roof vents used in trailers today are this size. These fit into a rough roof opening of 14-1/4 x 14-1/4-inches. We have both powered versions like # FV801250 and passive vents like # V2092SP-28. We also offer vent installation kits, part # CAM25013 for rubber roofs and part # 344270KITW for metal and wood roofs. We also offer many vent replacement...
    view full answer...
  • Replacement Ventline Trailer Roof Vent Covers for Parts V2092 and V2094
    We carry a broad range of Ventline products, complete vent assemblies as well as individual replacement parts, for both of the part numbers you referenced. For Ventline item V2092 we offer complete vent assemblies, # V2092SP-29 in smoke color and # V2092SP-28 in white. Replacement domes are also available, # BVD0449-A03 in smoke and # BVD0449-A01 in white. For powered vent V2094 we offer a complete vent assembly # V2094SP-34 in smoke and # V2094SP-30 in white. Replacement domes only...
    view full answer...
  • Roof & Wall Vents for Use in Enclosed Trailer
    It is possible to install a typical 14 x 14-inch trailer roof vent in your Triton trailer that has a curved roof so long as the surface where the vent will install is flat. These vents, such as # V2092SP-28, are not curved so they need their mounting surface to be flat, or very nearly flat. If the trailer roof has flat sections (say if it is pitched like a house's roof) then you should be fine so long as the curvature is not too severe. Based on your photo it looks like you'll be okay if...
    view full answer...
  • Trailer Roof Vent Recommendation for Above Shower
    When it comes to a vent that can be installed above your shower, I have two options for you. One being the Ultra-Fab Solar-Powered Plumbing Vent, # UF53-945001, and the other, a standard roof vent like the Ventline Ventadome Trailer Roof Vent, # V2092SP-28. The Ultra-Fab Solar-Powered Plumbing Vent, # UF53-945001, is a solar powered unit so it does not actually wire into the electrical system of the trailer and may help to pull moisture out of your trailer. It is only 7 inches in diameter...
    view full answer...
  • Replacement Vent Cover for 2008 American Hauler Night Hawk Cargo Trailer
    In order to determine if we have a replacement cover that will fit your trailer vent you will need to look at the hinge style of the old cover and also it's measurements. I have attached a picture to illustrate the different types of hinges. I have also included a link to all of our replacement vent covers. You can use the filters on the page to narrow the search. For example, if your current cover has a continuous hinge (kind of C-shape) and measures 14 inches x 14 inches, you could...
    view full answer...
  • Replacement Roof Vent Lid for 2007 Haulmark Trailer
    I do not have any information about which particular vent Haulmark used on their trailers, but you can easily determine which replacement lid you need. The easiest way to do this would be to provide me with any manufacturer and model number information you might be able to find. With this information, I can check with the various manufacturers for a replacement lid. If you cannot find any info on the remaining vent, you will need to measure the existing vent. When measuring for a replacement...
    view full answer...
  • Replacement Lid for 14 x 14 Ventline Trailer Roof Vent Model AS13M-V101
    We offer 14 x 14-inch trailer roof vent covers in many colors and styles. Based on your Ventline part number AS13M-V101 you can use either white lid # BV0554-01 or smoke lid # BV0554-03. Both feature a continuous type metal hinge, which is shown in the linked image. So long as this is your hinge type either replacement lid will work fine for you.
    view full answer...
  • Roof Vent Recommendation to Replace Hengs Style that is Easily Damaged
    Vent lid replacements are all specific to the vent that's installed on the trailer. If you are wanting a setup with a better lid design you'll have to swap out the old setup for a new one that has a lid design that is tougher. The Ventline Ventadome part # V2092SP-28 would be a great option to replace what you have.
    view full answer...
  • Replacement Roof Vent Lid for Hallmark Trailer
    For some reason I'm not able to open your picture but if it looks just like the one in the answer you mentioned then you have a standard sized roof vent with a continuous hinge. The hinge is a metal hook sort of shaped like "J" that runs the majority of the length along one side. I've attached the picture from the answer page you mentioned. The correct replacement lid is # BV0554-01 in white or # BV0554-03 in smoke. For a full replacement vent you can use # V2092SP-28. Or if you...
    view full answer...
  • Can Ventline Ventadome Roof Vent Be Installed on 1 inch Thick Roof
    You can use the Ventline Ventadome Trailer Roof Vent, # V2092SP-28, and then just trim down the garnish to the size you need. The garnish that comes with the vent is actually 2-1/8 inches deep to start with. I have included a link to a video review of this vent for you. We also recommend using the installation kit # 344270KITW when installing a vent.
    view full answer...
  • Replacement Roof Vent Lids for 1970s Avion Travel Trailers
    It sounds like you need replacement lids for the roof vents on your 1979 Avion travel trailers. We offer many replacement vent lids in both metal and plastic and in a variety of colors. Most roof vents in RVs are a standardized 14 x 14 size. These can come with any one of four different types of hinge and you'll want to take note of the hinge style on your trailers before selecting replacements. I reviewed photos of 1970s Avion trailers but I could not confirm the type of vents installed....
    view full answer...

Do you have a question about this RV Vents and Fan?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Written by:
Raymond P
Video by:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Leah S
Updated by:
Sarah W
Updated by:
Hannah L
Updated by:
Adam Y
Updated by:
Isabelle B
Installed by:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.