1. Enclosed Trailer Parts
  2. Polar Hardware
  3. Vents
  4. Ventilator
Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall

Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall

Item # PLR20
lowest price pledge
Our Price: $20.91
Enclosed Trailer Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.3 lbs
Quantity: 
In Stock
Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall Ventilator PLR20
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Vent allows air to circulate in and out of your enclosed trailer. Easily open and close the vent to adjust airflow with a sliding lever. Aluminum construction is durable, lightweight, and corrosion resistant. Call 800-298-8924 to order Polar Hardware enclosed trailer parts part number PLR20 or order online at etrailer.com. Free expert support on all Polar Hardware products. Guaranteed Lowest Price and Fastest Shipping for Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall. Enclosed Trailer Parts reviews from real customers.
  • All Info
  • Reviews (27)
  • Q & A (11)
  • Photos
  • Why etrailer?

Polar Hardware Enclosed Trailer Parts - PLR20

  • Vents
  • Ventilator
  • Polar Hardware

Vent allows air to circulate in and out of your enclosed trailer. Easily open and close the vent to adjust airflow with a sliding lever. Aluminum construction is durable, lightweight, and corrosion resistant.


Features:

  • Vent allows air to circulate in and out of your enclosed trailer
  • Easy to open - just slide the lever to open and close vent
  • Louvres direct airflow up or down depending on how the vent is mounted
  • (4) 2" Holes in rear of unit allow air in and out
  • Durable, rustproof aluminum front and back plates
    • Insert is constructed of corrosion-resistant zinc-plated steel


Specs:

  • Overall dimensions: 12-1/4" wide x 10-1/2" tall
    • 2-7/8" Between mounting holes on top (center to center)
    • 3" Between mounting holes on sides (center to center)
  • Ventilation hole diameter: 2"
  • Mounting hole diameter: 7/32"


Dimensions


20 Multi-Purpose Ventilator - Aluminum






Customer Reviews

Vent for Enclosed Trailers - Aluminum - 12-1/4" Wide x 10-1/2" Tall - PLR20

Average Customer Rating:  4.8 out of 5 stars   (27 Customer Reviews)

Vent allows air to circulate in and out of your enclosed trailer. Easily open and close the vent to adjust airflow with a sliding lever. Aluminum construction is durable, lightweight, and corrosion resistant.

- PLR20
by:

Well made, looks good, great price, brushed aluminum blends well on trailer. Needed to vent storage boxes on trailer from sweat and fumes, works great. Most excellent service thanks to Greg. 724619



- PLR20
by:

Great Merchandise if needed would buy a gain 711717



- PLR20
by:

what I expected thanks 457717



- PLR20
by:

I haven't installed them yet, but they appear to be good quality. Thanks! 640211



- PLR20
by:

Exactly what I needed for hunting blind vents. Excellent customer service and fast shipping as noted. 822191



- PLR20
by:

just what I was looking for! 821750



- PLR20
by:

Great product. Installed without issues. 803183



- PLR20
by:

Very nice aluminum trailer wall vent; fairly priced, quick delivery and best of all -- Made in USA... Thanks, kim 740141



- PLR20
by:

Good quality products, quick delivery t hx. 722862



- PLR20
by:

I bought 2 vent to install on my horse trailer. It was easy to install and it work good for my horse. I will be ordering more parts for my trailer soon. 672619



- PLR20
by:

Product as described, satisfied with the service 663300



- PLR20
by:

We needed a flush, non-protruding vent for a small, supplementary kitchen that we have in the basement. This is perfect. 598910



- PLR20
by:

Exactly what the details said they were 592803



- PLR20
by:

Easy install fast shipping highly recom mend 590249



- PLR20
by:

I use this product for my dogbox and it works great!! 588050



- PLR20
by:

Nice product. Like it. 544850



- PLR20
by:

Quality Product as described and fast d elivery 541658



- PLR20
by:

outstanding product, price and service 517868



- PLR20
by:

Great price and just what I needed. 430242



- PLR20
by:

Aluminum, it works handle could lock better in open or close positions. 421586



- PLR20
by:

I needed a cap after my tailgate slammed down on mine and broke mine, and cracked my plastic tail gate trim..ordered that too.. But anyway this installed in seconds! I picked out the broken pieces and popped this in w the help of a small hammer ..so easy and I had a strained shoulder when I did it, super fast. Shipping was VERY QUICK And COMMUNICATION was excellent! 413962



- PLR20
by:

Excellent vent for my covered utility trailer. Easy to install. Exterior finish is holding up well. Definitely recommend this supplier. jw 408966



- PLR20
by:

Delivered in 1 day, exactly what I ordered, and great quality. Fantastic seller. 398271



- PLR20
by:

We used this to cover a small hole in the rock guard on the front of our trailer rather than replace the whole thing. Now we have extra ventilation too. Just have to remember to keep it closed on wet roads! 396442



- PLR20
by:

This vent worked well to add ventilation to my aluminum dog box. I added two on the end; one for each compartment. The slide is very smooth and I plan to connect the two so I can open both from either side of my truck. Only thing that would make it better is if it had a template for the vent hole locations. 308778


26
28
Show More Reviews

Ask the Experts about this Polar Hardware Enclosed Trailer Parts

  • Recommended Placement and Sealant for Installing Polar Multi-Purpose Ventilator PLR20
    The Polar Multi-Purpose Ventilator # PLR20 has a lever to close the vent when there is risk of heavy rain (please see the linked photo) but the vent will block most water since it also has down-facing louvers on the outside. The lever lets you choose how much airflow you want. Using one at each end of the trailer is a good way to provide cross-ventilation and for the most cooling I suggest placing the rear vent up high (so it can expel more hot air from inside the trailer) and the front...
    view full answer...
  • Recommended Wall Vents and Roof Vent for Enclosed Trailer Air Movement
    The Multi-Purpose Ventilator - Aluminum # PLR20 will work to help you move air through your trailer. You may also be interested in the Side Cowl Ventilator with Screen # PLR1715. For the best air movement and still the weather protection, I recommend these side vents for the lower vents and then using a roof vent like # MA00-06401K if you have a trailer battery. If not, then I recommend the Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes - 7" Diameter x 3-3/4" Tall # UF53-945001...
    view full answer...
  • How Many Polar Vents Should be Used for 24' Enclosed Trailer in Southwest Florida
    Since you have a 24' trailer and are located in Southwest Florida you'll probably want at least 4 of the Polar Vent for Enclosed Trailers # PLR20; 2 at the top front corner of the trailer and the other 2 at the bottom corner on the opposite sides of the trailer. This will help to provide the most airflow, especially when you're traveling down the road. If you plan on leaving these vents open most of the time to help get rid of heat then I'd also install some type of mesh to help manage...
    view full answer...
  • Exhaust Vent Recommendation for Promaster Van with Minimal Vehicle Interior Projection
    The roof vents like the Fan-Tastic part # FV801208 install with a very minimal projection into the interior of the vehicle. If you check out the picture I attached you'll see that the ceiling height of your van would basically be unaffected.
    view full answer...
  • Dimensions of Multi-Purpose Ventilator # PLR20
    I went and grabbed a Multi-Purpose Ventilator # PLR20 from our warehouse to measure and found it to be 12.25 inches tall by 10-1/2 inches wide.
    view full answer...
  • Does the Multi-Purpose Ventilator # PLR20 Come with Mounting Hardware
    Multi-Purpose Ventilator # PLR20 does not come with hardware and there isn't a specific hardware kit for it. The reason for this is that it can be installed on pretty much anything which means the mounting surfaces can be made of different materials (wood, aluminum, steel, fiberglass). So rather than include hardware for all of those applications no hardware is included so you can select hardware that best fits your needs and matches what the surface material would require.
    view full answer...
  • Recommended Vent Setup to Cool Enclosed Trailer Mobile Workshop
    Even the smallest RV air conditioning units we offer will require 115-volt AC electrical service of at least 11-amps to operate properly. The Atwood Air Command Rooftop RV Air Conditioner # AT15025-21 will draw almost 4000-watts at startup and even once running it will still need close to 1300-watts to operate. Delivering this amount of power via high capacity 12V batteries and an inverter such as the 5000-watt Go Power # 34280179 will be a fairly costly and bulky proposition. Instead...
    view full answer...
  • Options to Vent a Storage Compartment on an RV
    I actually like your first idea better because we have trailer vents that you can install on your door to help keep water spray away from the internal components. Our selection ranges from battery box vents like part # A10-3300BK-05 to ventilator like part # PLR20 to wall vents like part # HMAV2-AVT2. These options will not only help to give you ventilation while protecting your solar setup from the elements but they will also help to give you a clean looking installation. I recommend installing...
    view full answer...
  • Side and Roof Vent Options for 5 x 8 Enclosed Trailer
    We carry all sorts of trailer vents and we can help you with a solution to provide proper ventilation in your 5 x 8 trailer. You can use either a roof vent or a side-mount ventilator, or both if you wish. We offer two side-mount ventilators that offer passive air flow, parts # PLR1715 and # PLR20. Side Cowl Ventilator # PLR1715 includes a screen and measures approximately 6 x 11-inches. Ventilator # PLR20 measures approximately 10-1/2 x 12-inches. Both vents allow you to open/close air...
    view full answer...
  • Available Trailer Sidewall Vent Covers
    We carry a range of complete trailer vents for roofs and walls as well as many replacement parts that you can see on the linked page. From your description it sounds like you may need both a side ventilator like Polar Multi-Purpose Ventilator # PLR20 (12-1/4 x 10-1/2) and a Side Cowl Ventilator # PLR1715 (6-15/16 x 11-5/8). As you can see these items do not have the exact specific dimensions you are looking for. These are not intended for any one particular trailer type or brand so they...
    view full answer...
  • Available RV Air Conditioners
    The RV air conditioners we offer are ceiling/roof-mount types that have ratings from 13,500 to 15,500 BTUs. All appear on the linked page. We do not have wall-mounted AC units but we do offer a wide range of wall vents like # PLR20 and fan-powered roof vents like 12V MaxxFan # MA00-07500K. All wall and roof vents are shown on the other linked page. When space and/or power availability do not allow use of a rooftop AC unit an effective alternative for many is a combination of passive...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality enclosed trailer parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate enclosed trailer part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Updated by:
Sarah W
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.