View Cart
Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4"

Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4"

Item # FV801208

lowest price pledge

Our Price: $111.76

RV Vents and Fans

This item qualifies for Free Shipping

Shipping Weight: 10 lbs

Quantity: 
In Stock, Ships Today
FV801208 - With 12V Fan Fantastic Vent RV Vents and Fans
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Roof Vent
  • Vent Assembly
  • Fantastic Vent
  • With 12V Fan
  • 14W x 14L Inch
  • Manual Lift
  • Tinted
Clamp-on roof vent uses a variable-speed, 12-volt fan to circulate the air in your RV, camper, or trailer. Easy-to-use hand knob allows you to lift and lower dome. Clamps onto a roof up to 4-1/4" thick. Lowest Prices for the best rv vents and fans from Fantastic Vent. Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4" part number FV801208 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (41)
  • Q & A (40)
  • Videos (1)
  • Photos
  • Why etrailer?

Fantastic Vent RV Vents and Fans - FV801208

Clamp-on roof vent uses a variable-speed, 12-volt fan to circulate the air in your RV, camper, or trailer. Easy-to-use hand knob allows you to lift and lower dome. Clamps onto a roof up to 4-1/4" thick.


Features:

  • Roof vent with 12V fan pushes stale air out of your RV, camper, or enclosed trailer
  • Variable-speed fan offers 3 speeds to boost or reduce airflow as needed
    • Manual speed knob on vent housing lets you control airflow
  • Hand knob on vent housing allows you to open and close dome
  • Smoke-colored polyethylene dome filters UV rays while allowing light in
  • White interior polypropylene trim (or garnish) and roof flange are included
    • Smooth edges won't cut you during installation
  • Simple installation with 2-wire design
    • Seals in place without screwing into the roof
  • Hardware included
  • Made in the USA


Specs:

  • Application: RV, camper, and trailer roofs up to 4-1/4" thick
    • Rough opening size: 14-1/4" x 14-1/4"
    • Garnish thickness: 4-1/4"
  • Vent extends above roof:
    • 4-1/2" When closed
    • 11-1/2" When open
  • Fan motor:
    • Capacity: 920 CFM
    • Voltage: 12 volts
    • 4-Amp slow blow fuse
  • Warranty:
    • 2-Year limited on vent assembly
    • Lifetime on dome (lid)


This Fan-Tastic Vent roof vent has a built-in 12V fan that pushes stale air out of your RV, camper, or enclosed trailer. A hand knob makes it easy to open and close the dome. And you can easily change the fan speed with the speed knob on the vent housing.


Ceiling Vent and Fan with 3 Speeds

Air out your RV after cooking and keep the air smelling fresh. Turn the speed knob on the vent housing to increase or decrease the fan speed. There are 3 speeds: low, medium, and high. This way, you can select the speed that you find most comfortable.


Installation

This vent requires a 14-1/4" x 14-1/4" opening in your trailer's roof and ceiling. To replace an old vent, install this vent into the existing opening. If your roof does not already have a vent, you will need to mark and cut an opening between roof joists to install this unit.


To install the vent dome assembly, simply apply sealant (sold separately) around the outer rim of the vent's base and set the vent in the roof opening. Then screw the garnish onto the bottom of the vent from the interior of your RV or trailer with the included screws. As you tighten the screws, being careful to avoid putting too much pressure on the wires, the garnish on the bottom and the dome assembly on the top clamp around your trailer's roof to effectively hold the vent in place.


The garnish can be cut down to fit a roof under 3" thick, if needed. Mounting screws that are 5", 4", and 3" long are all included to allow the garnish to fit together at its full length or at its trimmed down length.



FV801208 Fantastic Vent Clamp-on Trailer Roof Vent with 12-Volt Fan - Manual Lift Top - 14-1/4" x 14-1/4"







Video of Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Fantastic Vent RV Vents and Fans - Roof Vent - FV801208 Review

Speaker 1: Today we're taking a look at the Fantastic Vent roof vent with the 12 volt fan and four amp fuse. This roof vent pushes stale air out of your RV, camper, or enclosed trailer.A few features that I want to go over first, that way we can get them out of the way and then talk about the fan itself. The main one is this right here, this is an interior polypropylene trim, or garnish, and it has that big lip on it. This is what goes in-between the ceiling and the roof of your RV, camper, or enclosed trailer. This garnish right here has a lip length of four and one quarter inches and I'll show you that measurement in a moment. It can be trimmed down to fit your roof thickness if needed, so that way you don't have to purchase a shorter on, you can just trim this one down.

It's really nice that they include a little bit of a longer one than some other models.Then right here at the bottom, this is gonna be the portion that's visible from inside your RV, camper, or trailer. It's a really nice design, it's gonna offer a very clean finished look from the inside of your unit.Now it is a simple installation with a two wire design, black wire's for power, white wire's for ground. This unit's designed to clamp around the roof, it does not require screwing into the roof. You will want to apply some sealant around the outer rim of the vent's base and then set in to the roof opening. That provides a weather tight seal, sealant is sold separately and available at etrailer.com.The garnish screws onto the bottom of the vent so you'll notice right here there's gonna be a mount hole on each corner of this interior piece and then that comes up right here in this indention and then it mates up with the hole located right here.

The garnish screws into the bottom of the vent from the interior of your RV or trailer, as the screws are tightened this portion right, the garnish on the bottom and the dome assembly on top, clam around your roof to effectively hold the vent in place. Hardware to do that is included, it comes with three different length screws to fit your roof thickness. You're gonna have a five inch, a four inch, and three inch.Now that we've talked about the garnish we can go ahead and move that and get that out of the way that way we can focus on some more features about the actual vent. Before I move it out of the way I just want to show that measurement that I was getting, so the four and one-quarter inch measurement I was talking about is measured from the top of this portion here to the top of the unit so put a ruler on there and you can see that that's gonna measure about four and one-quarter inches. Again, hardware is included.Now, this vent offers a variable speed fan.

This is gonna offer three different settings, actually four. It has off, one, two, and three so that's going to offer off, low, medium, and high and that's a manual speed knob on the vent housing let's you control the air flow. Then located right here is the hand knob on the vent housing that allows you to open and close the dome. You can reach, grab that, you'll notice has a nice seal that goes around, creates a weather tight seal keeping the elements out. That's the fully open position so it's very easy to operate.The unit features a smoke colored polyethylene dome that filters UV rays while allowing plenty of light in.

It's gonna feature a 10 blade design and the blades are clear. The screen can be removed for easy cleaning. The screen is this portion right here, just flip out on that and it pops out of place that way you can get in there and clean it as necessary. The product is made in the USA. The vent requires a rough opening size of 14 and one-quarter inches by 14 and one-quarter inches in your trailer's roof and ceiling. Then when it's fully installed it extends above the roof by about four and a half inches when closed and 11 and a half inches when fully open.That's gonna do it for today's looks at the Fantastic Vent roof vent with the 12 volt fan and four amp fuse.


Customer Reviews

Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4" - FV801208

Average Customer Rating:  4.7 out of 5 stars   (41 Customer Reviews)

Clamp-on roof vent uses a variable-speed, 12-volt fan to circulate the air in your RV, camper, or trailer. Easy-to-use hand knob allows you to lift and lower dome. Clamps onto a roof up to 4-1/4" thick.

- FV801208
by:

After removing the AC Unit, I installed this clamp-on Fantastic Fan. I wanted the clamp-on so I could avoid drilling holes so if I wanted to reinstall the AC Unit I could without any issues. I used Butyl Tape around the perimeter and pressed it down and tightened the screws. Later I applied Nuflex 311 around the edges. After 1 year no leaks and we enjoy the extra ventilation. 504553


Comments

Vent is still working great! We really enjoy the extra ventilation. No maintenance has been needed and there have not been any leaks or signs of wear. Excellent Product!!!

John - 05/05/2019

54876
Comments

Vent is still working great! We really enjoy the extra ventilation. No maintenance has been needed and there have not been any leaks or signs of wear. Excellent Product!!!

John - 05/05/2019

54877

- FV801208
by:

Excellent price and service! 454279



- FV801208
by:

I bought one of these fans for my last trailer and was very satisfied with the quality and operation of the fan. The fan can really move the air. The fan could be shipped in a stronger container as the recent box was damaged but the fan was fine. Thanks. 599663



- FV801208
by:

I have a custom tear Drop Camper that needed heat extraction removed. The vent came in and my installler installed it. This product is absolutely great. Works on 12volt. I have solar panels on my tear drop that runs easily thiss Vent. I highly recommend this vent for all tear drops. I give it two thumbs up!! 483798


Comments

Working great!!no issues. I highly recommend.

Isabel N - 03/12/2019

50411

- FV801208
by:

Product was exactly as described. It installed easily and works flawlessly. I installed the fan in the roof of my 1980 Ford E350 van that I'm converting. It really keeps air circulating and quickly cools down the inside of the van. The wiring was straight forward and easy as was the rest of the install. The fan looks good and has a high quality look to it. I'm thrilled with my purchase. 515141



- FV801208
by:

Very well made and solid, not installed yet though, pending more parts 548873



- FV801208
by:

Product is good but I ordered a FV801208 and received a FV801200. Due to time constraints for my upcoming trip I had to install it and not use the higher garnish provided. 405172



- FV801208
by:

My son was very please with the quality. I was tickled with the awesome lightning delivery! 457309



- FV801208
by:

I purchased this fantastic fan to upgrade the non powered vent on my popup camper. Popup campers do not have 5" roofs and this model was designed for 2" roofs. 358479



- FV801208
by:

This review is for the product, not etrailer, which was very accommodating in letting me return these fans and should receive 5 stars for their service. Do remember to take pics of any defects before re-packaging in the box though, as they do require those for verification of the defect before they will send out a return shipping label. I ordered two of these fans, and was disappointed with both of them. The air-flow is good, as the fan has plenty of power, however the open/close knob strips out easily and is somewhat difficult to turn with big hands. And, the fan does whine a little as others have posted in reviews. Also, the little button that shuts off the fan when closing the vent cover is poorly centered so the cover barely touches it, and it shuts the fan off a bit too late after there is already a significant amount of back-pressure on the fan. And, the small round bug screen that keeps bugs out of the fan housing was falling out of it's seat. Last but not least, on both of the units I returned, the cover was mounted significantly off-center, so much so that when attempting to close the lid, it hit/got stuck on the bumper on the right side of the frame, which required you to turn the handle more aggressively, eventually possibly leading to stripping/failure of the cheaply designed open/close crank handle which is seated into thin plastic gearing. All in all, I'm not impressed on the build of this unit, or the quality control, especially for a fan that is made in the USA!? Based on the other reviews, it would appear that I'm the only one that was not impressed by this fan, and received a bum unit.... twice! 554092



- FV801208
by:

Just got back from camping and the fan arrived while we were gone. Based on past Fantastic Fan use, we give it a ‘10’. Will install this week. Thanks 499405



- FV801208
by:

I'm converting a car hauler into a toy hauler and needed a bath exhaust fan. The product arrived with some damage to the box, but the packaging provide did a superb job to protect the fan. I liked the fact that the inside housing ring is easily cut to fit. With the narrow cargo box I have, cutting the ring was very easy. Obviously the furnished screws were too long, but I new that when I purchased. I test ran the fan prior to install and was quite impressed with the quiet operation and I expect the fan will perform better than I wanted on low speed. I would recommend this fan to all who want to use it to evacuate stale air from their campers, regardless of the size. 426236



- FV801208
by:

I put this vent fan in my homebuilt small teardrop trailer. the living space is about 7'X6'X4' and this coupled with the 26"x30" window and door with 12"x30" sliding window allows for plenty of ventilation. I was easily able to integrate the 14"x14" opening into the roof design. The trim ring that secures the fan works well and the provided screws cover many different widths for installation. It was maybe a little too much air flow for the size of my trailer. However at the lowest setting, running it all night did not drain the battery running the trailer's stand alone 12V system. Size group 25 standard car battery 650 CCA. Open/close handle worked well. Lid closes and seals well. never had any leaks, used butyl rubber under exterior flange, tightened multiple times to allow for squeeze-out. I would recommend this to other homebuilders and use it in another project. 589423



- FV801208
by:

Good price. Delivered ahead of schedule. Excellent follow up. Would recommend this supplier to other buyers. 455426



- FV801208
by:

Perfect fit. 438948



- FV801208
by:

I removed my old vent and installed this one. Used eternabond tape to seal it. Works great and was pretty simple to install. My old one had one of the cheesy tiny fans and it kept sucking the screen against the fan blades and was super noisy. This is way quieter. 516991



- FV801208
by:

I ordered and installed the roof vent myself. Had to drill holes in wooden trusses to run the wire. But otherwise it was an easy installation. It has excellent air volume and runs quietly. When we are out for the day I can quickly flush out the hot air from the TT. The thermostat controlled fan would have been a nice upgrade. Had I known that that the fan was a good quality unit I would likely have gone for that upgrade. I covered the external fan cover with a vented cowling so I can leave the fan vent open even if raining. We are well pleased with the fan and recommend it to others. 658852



- FV801208
by:

Awesome product , great folks at etrailer to deal with . Have a Blessed week 652412



- FV801208
by:

Everything came as promised. The product came in a very attractive color and I cannot wait to get them installed. Everything was packaged well, too. 641683



- FV801208
by:

New to my RV, my fan was rubbing the guard, making an awful racket. Searching for replacement parts, I found this is an exact replacement for my fan. Shipping was fast, part as described. The website at etrailer.com made it easy to find the exact model I needed. 635140



- FV801208
by:

Good price, good bathroom fan. 633850



- FV801208
by:

Ordered the Fantastic vent fan to replace the standard bath vent in my travel trailer. Order was received in 4 days. Installation was simple and fan is excellent. Looking forward to “cool” air flowing through our trailer on next trip! Etrailer is great! 628583



- FV801208
by:

Product is fine, however I was under the impression it had the auto thermostat as my old one and it required us to adjust it and ad we are both short it is a bit of a pain. But possibly it's a good way to get exercise. It's fine 628170



- FV801208
by:

Exactly as described. 600351



- FV801208
by:

Overall this is a quality product, but it tends to collect water on the flat surfaces above the fan from condensation forming on the dome. This means that it drips sometimes and that you cannot cover the vent in the winter to reduce heat loss. It may be that this is a problem for all vents, but the other two vents in my RV don't seem to do this, and I am able to block them with rigid insulation in the winter. 599436



- FV801208
by:

Just what I expected and how picture shows it ..great part 594028



- FV801208
by:

Easy installation and it is working great. Very pleased with this product. 592031



- FV801208
by:

Exactly what we wanted. 570724



- FV801208
by:

We bought this Fan-Tastic for the bathroom as the little fan was so noise and under powered. It ran at to many RPM for what it was. This fan is large and with 3 speeds is just what we wanted. It is easy to install too. Thanks. 524396



- FV801208
by:

Ordered this rv fantastic fan as our original vent did not have a fan. I am totally happy with the product I got. Fan works great and is quiet Was also very happy with the shipping rate as I live in Canada and usually International shipping is much more. 514046



- FV801208
by:

Got in timely fashion, cant wait to install it 503069



- FV801208
by:

Works very well in my teardrop trailer. As ordered 494088



- FV801208
by:

Great job thanks 479016



- FV801208
by:

Product was exactly as described and was shipped very promptly. 410187



- FV801208
by:

Fast and free shipping, double good stuff. Thx 407932



- FV801208
by:

This is my second one, happy with the p erformance 381116



- FV801208
by:

Delivery was fast. Works great for my Transit Connect, Quite. 345032



- FV801208
by:

Quiet fan, looks good ..delivery was pretty fast. 334413


Comments

Only lasted 8 months .Need a stronger bracket to hold the plastic,top broke off,down hill after that.

Jannette M - 01/22/2018

33479

- FV801208
by:

Replaced stock bathroom vent in Lance Truck Camper with this way more powerful and much higher quality fan, which made a huge difference. This fan was a direct replacement with no modifications necessary; easy to install. Highly Recommend 301574



- FV801208
by:

Looks Great !!!! Fast delivery 297909



- FV801208
by:

As always, etrailer is a great source of really good products. I've installed these fans on three different trailers. (Yes, I'm a hoarder) And I would not think of looking at any other brand. 276901


47
47

Ask the Experts about this Fantastic Vent RV Vents and Fans
Do you have a question about this RV Vents and Fan?


  • Difference Between Fan-Tastic Vent Roof Vent # FV801200 and # FV801208
  • The Fan-Tastic Vent Roof Vent w/ 12V Fan # FV801200 and the Fan-Tastic Vent Roof Vent - Clamp On # FV801208 referenced in your question are indeed extremely similar to each other. These are both variable-speed, 12-volt roof vent fans designed for a rough opening size of 14-1/4 inch x 14-1/4 inch. As far as the units themselves, these products are virtually identical. The only real difference between the two models is the manner in which they install. The Fan-Tastic Vent Roof Vent -...
    view full answer...

  • What Does Clamp-On Mean For Fan-Tastic Vent Roof Vent # FV801208
  • Instead of the normal installation of a roof vent that requires a kit like part # 344270KITW, the Clamp-on feature of the # FV801208 fan uses four screws to attach the garnish on the bottom to the dome assembly on the top to clamp the fan to your roof. You will also need a sealant like part # 0160297 to give you a waterproof seal.
    view full answer...

  • Comparing the Fan-Tastic Vent # FV801200 and the Clamp on Fan-Tastic Vent # FV801208
  • Both the Fan-Tastic Vent Roof with the Manual Lift # FV801200 and the Clamp on Fan-Tastic Vent Roof with the Manual Lift # FV801208 have a height of 4-1/2 inches when closed and a height of 11-1/2 inches when opened. Neither of them is higher or lower than the other when installed. The controls for the fan will be located at about the same height as well. The part # FV801200 has the deeper sides but that does not affect where the control is located. If you are looking for something...
    view full answer...

  • Fantastic Roof Vent that Can be Reversed for Trailer Vent
  • I have a very similar solution for you, but the part # FV801208 is not reversible. Instead you would want the part # FV801250 which is reversible.
    view full answer...

  • Replacement Fan-Tastic Vent Dome for Model 2000TRS with Rain Sensor
  • The replacement dome part number you are looking for is # FVK1020-19. This will fit the Fan-tastic Vent Model 2000TRS with Rain Sensor. I have linked it to this page for your convenience.
    view full answer...

  • Difference Between Pair of Fan-Tastic Roof Vent With 12V fan
  • The difference between the two fans is only in their installation. The Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On # FV801208 is held in place by using sealant and then attaching the garnish to the bottom of the vent with four screws; it is the sealant which keeps the fan in place. The Fan-Tastic Vent Roof Vent w/ 12V Fan # FV801200, meanwhile, has mounting holes and is screwed into place. Outside of that, the two fans are identical. I've added links to video reviews of each for...
    view full answer...

  • Replacement Roof Vent Lid Recommendation for Fan-Tastic Roof Vent
  • Sounds like you are in need of a Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-19 since the roof vent info you have on your trailer is Fan-Tastic roof vent. The picture I attached shows some dimensions of the lid and mounting bracket that you can compare to what you have.
    view full answer...

  • Can Maxxair Roof Vent Cover Fit on Fan-Tastic Roof Vent # FV801208
  • Yes, the MaxxAir Standard RV Vent Cover part # MA00-933069 will fit if you have the Fan-Tastic Vent Roof Vent w/ 12V Fan # FV801208 installed. This cover is very universal in design and basically fits all standard 14 inch roof vents like the part # FV801208.
    view full answer...

  • Fantastic Fan Garnish Compatibility With Fan-Tastic Vent Roof Vent Clamp On Vs. Screw In Assembly
  • The Clamp On Garnish for Fan-Tastic Vents Roof Vent - 6" Leg - 14-1/4" x 14-1/4" - White # FVSA-XG6000-81-SP is made for the Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4" # FV801208. This garnish will not work properly on a the Fan-Tastic Vent Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" # FV801200 due to parts of the cover that are intended to interlock with the clamp style system.
    view full answer...

  • Installation of Fan-Tastic Vent Cover On Clamp On Style Vent
  • If your existing vent is screwed onto your roof, you will not need to drill holes to install this cover. Simply use the existing screws on each side of your vent and some caulk to attach the 4 mounting brackets included with the Ultra Breeze. Then secure the cover to the brackets with the included hardware. I've attached a diagram to assist. The clamp on style vent like # FV801208 does not have these screws or holes, so you will need to use the cover to line up your brackets to determine...
    view full answer...

  • 12 Volt DC Vent Fan Compatibility With 110 Volt AC Plug
  • I am glad that you have found the Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4", # FV801208 to be a fit for your needs. You will most likely need some wire like the # DW02359-1 to get your power where you want it. The end of your wire can be installed to a Replacement 12-Volt DC Power Plug like the # A-200. That plug will be able to connect to AC power using the AC to DC Adapter for Swift Hitch Wireless Camera System, # PP01. This is not a water resistant...
    view full answer...

  • Can Vent Lid of Fan-Tastic Vent Roof Vent # FV801208 be Opened While Traveling Down Highway
  • If you wanted to crack the lid of the Fan-Tastic Vent Roof Vent # FV801208 while you are travelling you certainly could as long as the lid was facing the rear of the trailer. Your best option would be to also install the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500BL. This installs on top of the Fan-Tastic vent to allow the lid to open much more while travelling.
    view full answer...

  • Recommendation for a Powered Roof Vent Fan with a White Lid
  • All of the similar Fan-Tastic vents/fans all have tinted lids but there are other assemblies with white lids such as # MA00A04301K which is a comparable fan. I have linked a video of this fan for you.
    view full answer...

  • 12 Volt DC Vent Fan Compatibility With 110 Volt AC Plug
  • The fan # FV801208 should run at full capacity at 2.1 amps which equates to 25 watt on a 12V DC system. The # PP01 may minimize that amperage since it appears to limit you, I recommend the Power Converter for Fan-Tastic Vent Endless Breeze Portable Box Fan # FV1101-09 which will allow you up to 5.8 amps for a fully functioning fan.
    view full answer...

  • Variable Speed Fantastic Roof Vent with Low Profile Lid Availabiilty
  • The only clamp-on style Fan-Tastic Vent roof vent we carry is the part # FV801208 but it only has the three-speed vent.
    view full answer...

  • Comparing Clamp on Fantastic Vent Fan # FV801208 to # FVFV801200
  • The Fan-Tastic Vent # FV801208 is a clamp on installation compared to the screw mounted installation of # FV801200. The other components of the vent fans are identical. Both require a sealant for installation but the clamp on # FV801208 will have screws on the inside versus the screws on the outside. For just the sealant, I recommend # 0160297. If you use the more traditional mounting then I recommend the kit with sealant and screws # 344270KITW.
    view full answer...

  • Will a Fan-Tastic Roof Vent Fit an Aliner Scout
  • Fan-Tastic Vent Roof Vent # FV801208 fits in a 14-1/4 inch square rough-in opening and the fan runs off of 12 volt DC power. The roof will have to be no more than 2 inches thick as well. Provided that your Aliner Scout meets those requirements you can install this vent and fan. I have linked a video review of the vent for you.
    view full answer...

  • Can Powered Fan-Tastic Vent be Opened and Closed Manually
  • While there are no replacement parts available for the Fan-Tastic Vent 6600R - the Replacement Lift Arm # FVK1140-09 you referenced is for model 5000RBT Fan-Tastic vents - it should have a manual lift knob on it already; if you take a look at the accompanying photo you can see the knob and yours should have a similar handle which you should be able to use. If for some reason you are unable to use that knob you would need to replace the unit with something such as the Fan-Tastic Vent...
    view full answer...

  • Compatibility of a Fantastic Vent Roof Vent Fan on a 1994 Palomino Popup Camper
  • The Fantastic Vent Roof Vent Fan # FV801208 will require a 14-1/4 inch x 14-1/4 inch opening in your trailer's roof and ceiling. To replace an old vent, install this vent into the existing opening. If your roof does not already have a vent, you will need to mark and cut an opening between roof joists to install this unit. The Fantastic Vent Fan, # FV801208, will fit a roof that is up to 2 inches thick. If your trailers roof is larger than 2 inches thick, then the attached link will...
    view full answer...

  • Will Fan-Tastic Vent Roof Vent Fit On 1997 Coachman Clipper Pop-up?
  • The Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift # FV801208 is the industry standard size of 14-1/4 x 14-1/4 inches. It will fit your 1997 Coachman Clipper Pop-up trailer as long as you have the standard vent hole or are willing to make one. This product has a nice 3 speed powered fan to boost or reduce air flow. I recommend you use the TremPro 644 Silicone Sealant - 10.1-Fl-Oz Cartridge - White # 0160297 to seal this install.
    view full answer...

  • Fan-Tastic Vent with Fan Compatibility with 1995 National RV Motorhome
  • The Fan-Tastic Vent Roof Vent w/ 12V Fan - Clamp On - Manual Lift - 14-1/4" x 14-1/4" # FV801208 is the industry standard size that will work well with your 1995 National RV motorhome whether you have the Dolphin or the Sea Breeze. This will work as a replacement or install in a new location. I've attached a video to assist. I recommend sealant # 0160297 for this installation.
    view full answer...

  • Adding a Fan to the Vent of a Lance Truck Camper
  • Yes, you can tie into the wiring from the bathroom light to install a fan for your vent. This vent fan has a switch on the assembly, so you will either have to wire into constant power before the switch to use independently or you will need the swich on to have power to the switch on the fan.
    view full answer...

  • Can Existing Holes from Old Vent Assembly be Used for Hardware to Install Fan-Tastic Roof Vent
  • As long as the holes where the existing screws are at are in good shape and they aren't too big for the recommended #8 screws that come in the installation kit # 344270KITW there should be no problem in using the same holes to install the Fan-Tastic Vent Roof Vent # FV801208.
    view full answer...


Do you have a question about this RV Vents and Fan?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality rv vents and fans for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv vents and fan information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Written by:
Rachael H
Expert Research:
Jeffrey L
Updated by:
Leah S
Updated by:
Shelly K
Updated by:
Sarah W
Photos by:
Stacy F
Photos by:
Jeffrey L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924