Ultra-Thin LED Strobe Light - Surface Mount - Submersible - 23 Flash Patterns - Amber LEDs

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378892240 Review

Speaker 1: Today, we're taking a look at a four LED ultra thin strobe light. This thin mount strobe light is designed with a thin, quarter inch profile, so it's a nice low profile design. Great for fitting into tighter areas.The 12 to 24 volt strobe light has four LEDs, and features 23 flash patterns, with alternating and synchronized functions. All of which are indicated right here in the instructions. It shows all the flash patterns, and it lists them by name. The light is rated IPX8 for a waterproof design, and has the SAE J595 Class 1 CA13 rating.LEDs make great replacements for incandescent lights.

They last longer, they burn brighter, they're more efficient. With LEDs, you don't have to worry about replacing bulbs, or worry about brittle filaments .This unit features a really nice, clear lens with amber LEDs. It's a surface mount installation. It does come with a foam gasket with adhesive backing on each side. So you do have a peel-and-stick installation option, as well as mounting screws.It's a three wire design, so the white wire is our power wire, black wire is for ground, and brown is for synchronizing and changing the flash pattern.

Wiring colors and functions are also indicated in the instructions.When it comes to the overall dimensions, edge to edge going this direction is 4 3/8 inches. Edge to edge this direction is 1 3/16 inches, and the thickness is a quarter inch. Has a nice aluminum backing, so it's strong, durable, and corrosion resistant. Mount holes are separated on center by 4 inches.We're gonna go ahead and hook it up to power, that way you can see what it looks like with powering to it. I'm gonna connect the white wire to power, black wire to ground.

I do want to point out that it does has an all feature, or function, which means all the LEDs come on, so it has that nice, solid design. And then they change the flash pattern. We take our brown wire, and we touch it to power. That's gonna allow us to change the flash pattern, so we can get what we want.And then when power is turned off, and turned back on, it does memorize the previous setting. It has 23 flash patterns, I'm not gonna go through all of them.

I'll just go through a few here so you can see some of which the light has to offer. It's a nice, bright design. Again, four LEDs, or four diodes. So, the multi diode design really helps optimize the overall light output. Voltage is 12 the 24 volts. And when it comes to the amperage, we're looking at .65 amps at 12 volts. Go through a few more here. Really nice, bright design. That's gonna do it for today's look at the four LED ultra thin strobe light.