Hidden LED Strobe Light Kit w/ In-Line Flashers - Bolt-On - 19 Flash Patterns - Amber/White - Qty 2

Video Transcript for Hidden LED Strobe Light Kit w/ In-Line Flashers Review

Today, we're going to take a look at the hidden led strobe light kit with the inline flashers for a quantity of two lights. Now, these are hidden strobe lights that alert other drivers or pedestrians to the presence of your service vehicle. It's designed for installation inside of your vehicle's headlights or taillights, and it's great for work trucks or service vehicles. It does offer 19 different flash patterns, which allow you to select what works best for your application and conditions. It does have a synchronize function and allow eight lights to be wired together for simultaneous or alternate flashing. They do use high output LEDs.

They're energy efficient, long lasting, vibration resistant. There's six LEDs per light. Basically, it's a clear lens over three clear and three amber LEDs. If you notice the housing that they're on is a durable heat sink aluminum housing, and the lens is polycarbonate construction.This part is compatible with 12 volt and 24 volt DC systems. It's a very simple bolt on installation.

How to install this, it does require an inch diameter hole for the light to stick through. It does include these two light heads, the gaskets, the screws, and then this 25 foot long harness with the inline flash module and these weather pack connectors for weather tight connections. Now, we do also offer chrome and black bezels that you could put around these after they're installed to provide a nice finished look. Those are sold separately on our website and they're listed on this product page as a related product. But basically when you go to make your connections, just line up here connectors.

They just snap right into place. I am going to hook this up to demonstrate the light and show you some of the flashes.A few dimensions on this on one light, the diameter of the lens here is one inch diameter. The housing, the heat sink housing is one and a half inch diameter, and the depth of them is about one inch deep. Distance between the mounting holes, there's two mounting holes. The distance center to center on those is one and a quarter inches.

Power draw at 12 volts is 1.3 amps. Wattage is 16 Watts. It comes with a nice set of instructions that will describe how to hook it up, how to install it, even mentions your flash patterns right there. I'm going to give you an idea of a few of them. There's quite a few, but we'll go through just a couple of them.What we're going to go ahead and hook this up to some 12 volt power. It has four wires. You can see blunt wires for your connections. Black wire is your ground wire and the other ones are for your flashers. We'll go ahead and take the . Hook that one up. We'll move that up. Then what I'm going to go ahead and do is turn on the lights. You can see with them lit up. You can see they're flashing right now. Again ahead and turn off the overhead lights. You can just see for two little one inch diameter lights, they give off a very bright light. Then I'll just show you can change the different patterns just like that. But again, there's 19 different flash patterns that you can choose. Go ahead and turn back on our overhead lights and turn off our power.But that should do it for the review on the hidden led strobe light kit with the inline flashers for a quantity of two lights.