bing tracking image
  1. Wiring
  2. Spectro
  3. Wiring Protection
  4. Wire Loom
  5. 1/2 Inch Diameter
Wire Loom, 1/2" Diameter (per Foot)

Wire Loom, 1/2" Diameter (per Foot)

Item # 459075-1
Our Price: $2.00
Wiring
Shipping Weight: 0.02 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Great Prices for the best wiring from Spectro. Wire Loom, 1/2" Diameter (per Foot) part number 459075-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (138)
  • Q & A (0)
  • Videos (2)
  • Photos

Spectro Wiring - 459075-1

  • Wiring Protection
  • Wire Loom
  • Spectro
  • 1/2 Inch Diameter


Wire Loom 1/2" Diameter

  • Sold per foot


459075-1 Wire Conduit, 1/2" Diameter (per Foot)





Video of Wire Loom, 1/2" Diameter (per Foot)

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Spectro Wiring - Tools for Wiring - 459075-1 Review

Today, we're going to review part number 459075-1. This is the plastic wire loom, 1/2" in diameter. This part number is sold by foot. This part number is for 1 foot. Basically, how many feet you would need is you would just order this part number times how many feet you would need. I'll show you basically, there is about the 1 foot that you would get, and as you can see, it is 1/2" diameter.

It does have the opening on one side to where you can put your wires in. Basically, this would be used if you are going to do any wiring on your trailer or vehicle. Once you get your wires all run, you can put all the wires together in this loom to keep them in one spot. We also sell a related product if you need more than just the couple feet. Basically, we sell part number 459075, and basically, it's a box of 100 feet of this wire loom if needed. That should do it for the review on part number 459075-1. This is the plastic wire loom, 1/2" in diameter, per foot.

.

Customer Satisfaction Score:


Customer Reviews

Wire Loom, 1/2" Diameter (per Foot) - 459075-1

Average Customer Rating:  4.8 out of 5 stars   (138 Customer Reviews)


by:

Item is as described, great instructions, fast shipping, would buy again!



by:

Product, customer service and delivery time were all exceptional in every way! The towbar and all accessories I ordered were a perfect fit without any modifications and the pictures and videos on your website were extremely helpful!



by:

This unit does not wrap around the tubing for the 3/8" pipe completely however it handles about 80% coverage and protects the tubing against the metal edges.



by:

Excellent product options with decent prices. Fast and dependable delivery. Would definitely buy from E-Trailer again when the need arises.



by:

This inexpensive plastic "loom" is great for protecting hitch wiring. I used black electrical tape with a few wraps at the ends so that it won't "move".. and it installed on all the hitch wiring in just a couple of minutes. Thanks for a good product and prompt courteous service. :-)

" />


by:

Made it a very clean installation



by:

Again, another out of the park home run from etrailer. They ship fast, stock lots of items and will help you along the way. I bought a length of that crinkly plastic wiring cover and it worked magnificently on the deal. No weather is going to creep around and rot out the wiring and leave me stranded on the side of the road with no directional or brake lights, with no option left but to sleep in the parking lot of a Burger King while cursing the inferior online competitor that sells sub par crinklies. So put me in coach, I’m ready to safely drive with a well-lit trailer!



by:

I decided to completely rewire my 16' flat trailer due to broken wires and inoperative connectors. This product did the trick to replace a worn out wire cover. Easy to use. Just cut what you need and zip tie and electrical tape if needed. The videos and explanations by etrailer are really helpful.



by:

I purchased the both the hitch and proper wiring harness for my 2014 Kia Sorento from etrailer.com

They arrived quickly and in excellent condition.

The hitch install was fairly easy and the fit was excellent.

This is the second product I have purchased from etrailer.com and both were excellent experiences.



by:

Everything I ordered has worked flawles sly.



by:

Got surprise expedited shipping, got my packages quick and was able to work on my trailer before work. These are quality materials, not like the kind you get from your local stores.



by:

I ordered the receiver and the harness for the trailer brake lights. Both were plug and play very easy to install.



by:

I bought this wire loom to add an extra layer of protection around my 6 wire cable that runs the length of the underside on my utility trailer. It fit the cable just fine, but left very little room for any additional wire. This should add a bit of assurance to a replacement cable that was needed due to some road rash and a few shorts.



by:

Purchased trailer hitch and wiring for 2016 Jeep Wrangler Unlimited. Received them immediately. Great video installation instructions on the website enabled me to install both very quickly without the need for cussing. Very satisfied.



by:

Worked great to hide, protect and contain loose wires I had with my trailer brake controller installation



by:

Part was shipped timely and was exactly what I ordered. Installed last weekend and trailer lights are working great.

The installation videos were very helpful. Thanks for the great service.



by:


Ordered a 35' wiring harness and some
wire loom. Really fast shipping. No problems. I would recommend this site.



by:

I HAVE PURCHASED SEVERAL ITEMS FROM E TRAILER . FROM TRAILER PARTS TO REBUILD A CONSTRUCTION TRAILER TO PARTS FROM MY FIFTH WHEEL CAMPER . THE QUALITY OF THEIR PARTS HAS ALWAYS BEEN THE BEST .



by:

I am glad I came upon this site. The staff is friendly courteous and helpful.

Since I live in Canada it is a big problem if I had to send items back across the border to etrailer if the items were not what I thought they were. The short videos that etrailer provides with each product is extremely helpful in determining to purchase or not. Thank you for that feature. Knowing a little about video production and the costs associated with that, it must cost etrailer a pile to give us (the consumers) what appears to be a simple addition on their site

Thanks again guys/gals



by:

I needed just short of 2 foot for the wiring harness for the P3 Brake Controller. This was perfect!



by:

Excellent product, fast delivery, exactly as ordered, well packaged and instruction video easy to follow. Thx a lot ETrailer! I saved 300$ by doing my hitch installation myself.



by:

product was fine. It was difficult to find as it didn't come up under wire conduit.
Had never heard the term "loom" before..



by:

Everything worked just fine .I now have tailligts that work thanks to your wiring and taillights Thank you for your excellent products.



by:

All items in the order for trailer wiring components were exactly what I ordered and all items were delivered promptly. Good communication from Etrailer with reasonable prices, and FREE SHIPPING!! Nice.



by:

Great place to order from


25
138
Show More Reviews

See what our Experts say about this Spectro Wiring

  • What Is the Largest Wire Loom Available?
    3/4" is pretty large, the closest we have to 3/4" is the Wire Loom # 459075 which has a 1/2" diameter. This loom is 100', however if you would rather use by the foot you'd want # 459075-1 instead.
    view full answer...
  • What Size Clamp to Use for 3/8" and 1/2" Size Wire Loom
    You should be able to use the same size clip as the inner diameter of the wire loom. For example, the 3/8" Diameter Wire Loom # 39035 has grooves in it that would allow you to use a 3/8" inner diameter clamp. Same thing goes for the 1/2" Wire Loom # 459075-1 or # 459075.
    view full answer...
  • How to Install Tekonsha Prodigy P2 Brake Controller on a 2015 Volkswagen Touareg TDI
    The factory plug for installing the Prodigy P2 # 90885 on your 2015 Volkswagen Touareg TDI should be located under the vehicle's dash on the driver's side close to the door. You will need to acquire the following from your Volkswagen dealer to perform the install: 1 connector housing (#1J0-972-782) and 2 wire/terminal assemblies (#000-979-228). I have attached a photo of where the connector is located as well as a helpful article and an installation video of us installing the P2 with the...
    view full answer...
    Image 1 for
  • Does Tekonsha 4-Pole Wiring Harness 118786 Fit 2018 Jeep JL Wrangler
    Tekonsha's Fit Guide confirms wiring harness # 118786 as a fit for your 2018 Jeep JL Wrangler. You can double-check before ordering if you like by comparing the included photo that shows one of the harness' custom connectors to the connectors at your Wrangler's tail lights. Installation should take about an hour or less and you can refer to the linked wiring installation article and video for guidance. I recommend adding protective wire loom # 459075-1 to your install; this is sold by...
    view full answer...
    Image 1 for
  • Recommended Wire Loom for Parallel Multi Conductor Wire
    For the # SWC4332-1 you can use the Wire Loom, 1/2" Diameter (per Foot) # 459075-1. This is sold by the foot so you can get exactly what you need. Since I'm guessing you don't want to drill into your galvanized frame, I would try zip ties to keep it secure.
    view full answer...
  • Can Wire Loom be Used to Protect Wiring from Sun Damage
    Wire loom like the # 7509-10 that you referenced is a great way to help protect wiring. This kit is 10 feet long and 1/4 inch in diameter. If you need bigger we have 1/2 inch diameter loom sold by the foot as part # 459075-1.
    view full answer...
  • Can the Power Wire on Trailer Wiring Harness # 118498 be Routed Inside of a 2011 Toyota Sienna
    There are a couple of options for routing the power wire for Tow Ready Custom Fit Vehicle Wiring, # 118498. Since you want to keep it out of the elements, you can either route the wire through the frame or route it through the cab of the vehicle. If you want to route it through the frame, you will need a long and rigid piece of wire, push it through the inside of the frame from the front of the vehicle to the back, tie the power wire to the end, then pull the rigid wire back through. This...
    view full answer...
  • What is the Best Size Wire Loom for Bonded 4 Wire and One 12 Gauge Wire
    I would go with a 3/8 inch diameter, like # 39035. That should provide enough space for the wires and still give good coverage. This loom comes in a 10 foot length. If you needed less of expect that you might have other wiring to run with the existing wires, you can go to a 1/2 inch loom, sold in 1 foot increments, # 459075-1.
    view full answer...
  • Black Molded Fender Bracket for Clearance Lights Not Long Enough for 10 Inch Wide Fender
    There isn't a longer version of bracket # A67BB but what you could do is use some wire loom, such as # 459075-1, to hide/protect the wire. Or you could likely find a small diameter plastic tube that you could cut in have (lengthwise) to get a semi-circle to extend the length of the bracket.
    view full answer...
  • Compatibility Of 1/2 Inch Loom Clamps With 3/8 Inch Loom
    Yes, you can use Metal Loom Clamp - 1/2" # A0500 with Wire Loom 3/8" Diameter # 39035. It will secure the loom to your frame but it will not clamp tightly around it. If you want a tight fit at the clamps you can use 3/4" x 60' Electrical Tape to close the loom at that location and make it your desired thickness for clamping. If you want a perfect fit, I recommend the Wire Loom, 1/2" Diameter (per Foot) # 459075-1.
    view full answer...
  • Installing Tekonsha Primus # TK90160 Brake Controller on 2014 Chevy Suburban
    The 2014 Suburban doesn't use a plug like the 2014 Silverado 1500 does, it will wire directly into the tow package wiring like the 2008-2013 GM trucks did. If you look at the FAQ article I've linked you to, you can see the Primus would wire up to the tow package wiring located under the dash. I've also linked you to an install video showing a controller being installed on a 2008 GMC Yukon. Although the vehicle is different, the install procedure would be just about identical. The wiring...
    view full answer...
  • T-One Vehicle Wiring Harness for 2019 Jeep Wrangler Unlimited
    The Wiring Harness # 118416 that you are looking at is for the 2007-2018 Jeep Wranglers. For your 2019 Jeep Wrangler Unlimited you will need the Wiring Harness # 118786. The taillight connections are new for your Jeep. We do have a great video linked below of this harness being installed on your Jeep. I recommend getting some Wire Loom # 459075-1 and a Mounting Bracket # 18144 for a clean factory looking installation.
    view full answer...
  • Recommended Wiring And Trailer Light Kit For Harbor Freight Trailer
    Since you said you want to re-wire your entire trailer I recommend the Optronics Submersible Trailer Light Kit, part # TL5RK. This kit comes with 2 stud-mount lights, 2 amber side marker and clearance lights, a license plate bracket, and a 25 ft wiring harness with a 4-way connector. The mounting hardware is also included with this kit. I have also attached a link to an installation video for this wiring kit you can check out.
    view full answer...
  • 2019 VW Volkswagen Atlas Trailer Hitch And 4-Way Wiring Harness
    The Curt Trailer Hitch Receiver # C13366 is a great option for adding a hitch to your 2019 Volkswagen Atlas although we don't have an etrailer branded hitch currently that is a confirmed fit for this vehicle. This hitch will do the job for you whether you're looking to carry bikes, additional cargo, or towing. The black gloss finish looks great and will help resist corrosion for a long life of use on your Atlas. Installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat...
    view full answer...
  • Can 12V Source Other than Battery Be Used When Installing Trailer Harness On 2017 Lexus NX
    The problem with attaching the 12V hot wire to any 12V plug or accessory in the vehicle is that the plug you found may be on a circuit with another item in your Lexus. You really want to make sure the wiring harness is on a circuit by itself. That way it protect the vehicle electrical system if anything happens like damage or a short. There is an inline fuse with the # 118652 harness that protects the converter and the wiring. I do not recommend using any 12V source other than the battery...
    view full answer...
  • Brake Controller Wiring Kit For Vehicle With 7 Way Already Installed
    We do offer the wiring kit # 5506 which will includes the wire, circuit breakers and connectors that come in the # ETBC7 kit. You can get a few feet of wire loom # 459075-1 and some zip ties. Since your vehicle already has the 7 way installed, that will be all you need.
    view full answer...
  • Replacement Wire Loom to Secure RV Slide-Out Wiring
    Thanks for the photo, that was a huge help! You're needing 1/2 inch wire loom, which we sell by the foot as part # 459075-1. I'd also use some 1/2 inch loom clamps, part # A0500 to secure the wire loom and hold it where it's supposed to be.
    view full answer...
    Image 1 for
  • What Size Wire Loom Is Recommended for Trailer 7-Way Wiring
    For a wire loom for 7-way wiring we recommend 1/2 inch diameter like part # 459075-1 that is sold by the foot. I have a 7-way adapter on my desk that has a wire loom on it that is 1/2 inch so I know this size would be correct.
    view full answer...
  • Wiring Parts Needed to Connect F-250 7-Way Socket to Lights on Headache Rack
    All lighting functions are accessible at the 7-way socket on your 2001 F-250. The function(s) carried on each of the 7-way contacts are shown in the linked photo. The easiest way to tap into these circuits is to install a 5th wheel wiring harness like # PK11932. This harness plugs in in parallel to the existing 7-way. Just remove the round U.S. Car connector at the back of your 7-way socket and plug in the PK11932 between the OEM harness and the socket. This will give you 7-1/2-feet of...
    view full answer...
    Image 1 for
  • Bypassing Trailer Wiring After Squirrels Ate Through It
    It probably does run through the frame but to get a wiring diagram or other technical information you would need to contact the trailer manufacturer. The easiest thing to do is to just run a new wire or wires and bypass the old wiring. There could be further damage that is unseen. For brake wire I recommend # 10-1-1 which is sold by the foot. For the lights I recommend # DW04923-1 which is jacketed for additional protection from vicious North American Red Tailed wire munching squirrels...
    view full answer...
  • Availability of ETBC7 Brake Control Install Kit Without 4 pole to 7-way Adapter
    You sure can. Simply order part # 5506, which is the # ETBC7 minus the following items: -4 pole to 7-way connector, bracket and mounting hardware -Zip ties -2 each # SWC502905-1 Quick Splice connector -Circuit tester -2 foot of 1/2 inch wire loom sold by the foot as # 459075-1
    view full answer...
  • Installation of Blue Ox Bulb and Socket Tail Light Kit on 2001 Honda CR-V
    The wiring can be ran through the vehicle interior if you wish, but doing so will triple or quadruple the install time and complexity. I do not have specific instructions regarding how to do this, but generally speaking you would need to use an existing opening in the firewall (or drill one if there is not an existing opening). The wire would run behind the side kick plate, and under the door thresholds to the rear cargo area. From there, it would run behind the side trim panel in the cargo...
    view full answer...
  • Best Protective Wire Loom for Installing Cargo Carrier Light Kit 98174LED
    To install the cargo carrier LED Light Kit # 98174LED I suggest you use the 1/2-inch wire loom # 459075-1. This is the largest size we offer and it will make installation a bit easier. It is sold by the foot. Some extra zip ties # DW05724-10 might help too.
    view full answer...
  • Are There Any Trailer 7-Way Cables With 6 or 8 Gauge Wire Available
    The trailer 7-way cables that we currently offer are going to max out at 10awg so you would need to get just the connector, like part # A7WCB, and wire it yourself with 8awg or 6awg. To protect the wires you can use some 1/2" wire loom # 459075-1 and wrap it all with electrical tape.
    view full answer...

Do you have a question about this Wiring?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924