To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your rear cargo area, behind the tail lights on both the driver's side and passenger's side. You will have to remove some interior paneling to access this harness. Once you've plugged in the T-connector, run the hot lead to the power cable stud on the driver's side and connect the wire using the ring terminal. Then insert the included 15-amp fuse into the fuse holder.
Once installation is complete, the 4-way connector will be stowed in your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (16 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.867690
It was easy to I stall (took about 10 minutes), and it works well. I would recommend. 844828
Good product!! 831308
Good price and high quality product. Install was very straightforward with the detailed videos at etrailer. Saved over $1000 versus dealer install! 811850
Went in just as the instructions descri bed. 787512
Great product! Easy to install 771864
Fairly price, clear instructions for the type of vehicle, easy to install. I used it with a to light up several different trailers with no issues 750080
Very easy buying process! I really liked that you could check to see if your vehicle is compatible with the product. Fast shipping as well! 730335
everything worked perfectly, i was very happy with how easy this was to install and how well it worked. it did not mess with any of my car sensors or anything so i am very please. i would totally buy again if needed. directions could be a bit better in the box but youtube had some quick and easy help to make it work well. 718675
Frankly working with etrailer is as easy as working with [online retailer], the one big difference is the personal interaction and the review/installation videos. I installed the wiring on my wife's Volvo just by watching the video and I am NOT mechanical in any way. etrailer runs the way, I run my business. Customer-centric, communicative and attention to detail. Well done!! 692803
The vehicle specific videos were very helpful in DIY install. 669755
I have a 2019 Volvo XC 90. It took about 2 hours to install The Drawtite hitch and taillight kit. Taillights worked perfectly. No programming the cars computer. Total price etrailer: less than $300. Volvo wanted $1,600. etrailers sales person: home run. Very nice. 655984
Jason was very professional and helped me addd additional items to my order. The items arrived in two days as promised in great condition. I’ll know more about the hitch when I install it. 642849
The directions are OK except you have to remove the "threshold" before you can remove the side panels. Also there is a little cap over the anchors that has to be removed to gain access to the hold down bolt. The battery on a Volvo 2019 is not in the engine compartment, but under the spare tire. Much easier to tie into. 637916
This was incredibly easy to install with the online video. The wires were all plenty long enough which is where a lot of companies cut corners since copper is very expensive. Thanks for selling a great product, it is appreciated. 484181
The wiring fits perfectly and is easy to install. I would have given 5 stars if the instructions were easier to read/see. I couldn't even tell what the pictures were because the quality was so bad. I had to take interior panels off and feel around to find where the plugs were. 407507
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.