T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118669

lowest price pledge

Retail:$78.02

Our Price: $52.95

You Save: 32%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.68 lbs

Quantity: 
In Stock
Tekonsha Custom Fit Vehicle Wiring - 118669
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Tekonsha
  • Powered Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. Call 800-298-8924 to order Tekonsha custom fit vehicle wiring part number 118669 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.


  • All Info
  • Reviews (39)
  • Q & A (35)
  • Videos (5)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118669

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points behind tail lights
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.


T-One Connection Location Points Behind Tail Lights

Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118669 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite



118669 Installation InstructionsInstallation Details 118669 Installation instructions

This Product Fits The Following Vehicles

2015 - 2018 Ford Edge SE and SEL

2015 - 2018 Ford Edge SE and SEL



California residents: click here


Video of T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Wiring Harness Installation - 2017 Ford Edge

Speaker 1: Today on our 2017 Ford Edge, you're going to be taking a look at and I'm going to show you how to install the Tekonsha T-One Vehicle Wiring Harness with 4-pole flat trailer connector, part number 118669.This is what our wiring looks like when it's installed. It's going to give you all the proper lighting plugs you need for towing your trailer so you can get down the road safely. It's going to give you your turn signals, your brake lights, your ground, and your running lights. You have a nice attached dust cap that's going to help keep any dirt and debris and moisture from getting on your connections and corroding over time.This wiring harness is going to have a power wire that's going to run up to the battery, so it's going to be drawing power from that instead of drawing power from the vehicle's taillights. How that helps is you're going to have 4.2 amps per circuit for your stop and turn signal, and then you're going to have 7.5 amps for your taillights. If you have a few extra lights on your trailer, having that power wire running up to your batter is going to maintain the brightness of the lights on your vehicle and the trailer because it's not drawing any power from the vehicle.One nice thing about the attached dust cap is it can double as a holder when not in use to keep your wiring from dragging the ground.

Now, if you wanted a more permanent setup, there's a couple of brackets that you can purchase. One would mount to your hitch and the other is a 4-pole bracket that mounts to the long bracket, and this will just slide into place.Now that we've gone over some of the features of the wiring, let me show you how to get it installed.This is what you're going to get in your kit wen you receive it. You're going to get your wiring harness. It's going to connect to your driver side and passenger side taillights. You're going to have your 4-pole connector that's going to give you all of the proper functions for your trailer.

You're going to get some stuff like this. You have your fuse holder, your fuse, couple of heat shrink butt connectors, ring terminal, some double sided sticky tape. You're also going to get some power wire that's going to be run up to your battery.Now, what's most important is this box right here. This is your converter box, and this is what's going to protect your vehicle wiring from any backfeed if there's a problem with your trailer wiring and vice versa. If there's a problem with the vehicle wiring, it's going to protect the wiring on the trailer.Another thing is the power wire that runs to the battery, it's not going to be drawing any power from your lights.

It's going to be drawing it from the battery itself. If you have a trailer that has a few extra lights, you're not going to have any dimming of your taillights on your trailer and on your vehicle. All it's doing is getting the signal from your vehicle. The reason I wanted to go over this now is while I'm installing it, it might be hard to see some of this.Now, we'll go ahead and get started on the installation.The first thing we're going to do, because we're going to be routing this behind our bumper fascia and because our power wire coming off our converter box is so short, it's going to be easier if you connect it now. We'll go ahead and add one of our heat shrink butt connectors, and then we'll take our black wire, our power wire that we're going to be running up the front, and then we'll connect it on the other end.

Then we're going to take a heat source, and we'll go ahead and shrink that butt connector down.Now, we need to remove our taillights. You're going to have a little cap right here. Take a flathead screwdriver, just going to pop that out. You're going to have a torx bit screw inside. Take a 1/4" socket and a T20 torx bit. What you're going to find is if you use a socket the torx bit doesn't stay in. What I suggest, take a little piece of paper towel, stick it over the end like that, and push it down in there. Now, it stays in. You only have to do this if you don't have a magnetic 1/4" socket that will hold that in place. Remove that torx head screw. Then we're going to take our light, and we want to pull back, just like that.Now, we'll have our wiring harness right here. Go ahead and push in on that little black tab right there and pull up like that. Then we'll set our light aside to be reinstalled later. Next thing you want to do is repeat the same process for taking your taillight out on the passenger side of the vehicle.Now, we're going to have to run our wire up right behind our fascia. As you can see, it's tight in here. We're not going to be able to get it through that hole, so what we're going to do is there's a fastener right here and right here. So, what we're going to do is we're going to pull out like this, and that's going to give us enough room to get our wiring up from down underneath.Now what we want to do is you can either use some air line tube, wire hanger, you can take a nut, a bolt, even a closed end wrench, tie a string on the end of it to make it weighted on one end. We're going to pry this out a little bit, and then we're going to drop it down in there so it comes out of the bottom. Now what I'm going to do is I'm going to take some electrical tape, and I'm just going to tape this to my string. You want to make sure you're using the yellow and brown side. That's going to be the driver's side. Go ahead and pull our wire up. What it's getting stuck on down there is you have wires running to your sensors.If you're having trouble pulling it up, just reach up there and just pull them out just a little bit, and you'll be able to get it back behind them. Just like that, and we'll take the tape off. We're just going to match our ends, plug that in until it clicks, and then we'll plug that into our taillight. Then we'll connect our taillight to our plug, push it in until it clicks, and then we can reinstall our taillight.You can see we're having a little bit of trouble with our wiring where it's made the connection. So, what we're going to do, I'm actually going to go ahead and take it back off. Down inside where your factory wiring is connected, there's a little white fastener right there. We're going to go ahead and disconnect that, pull it off, and then push this whole wiring harness down inside there. We'll just pull out on it. A flathead screwdriver works. Just like that. That's what our fastener looks like. Get our taillight plugged back in. Push your fascia back into place, then we can reinstall the taillight.Now, we need to mount our converter box and our ground wire. You can see there's no a lot of room to work. We want to stay away from the heat source, the exhaust here. What I'm going to do, I'm going to take a 7/32". You've got these two screws right here. I'm going to take a 10mm. I'm going to take out this nut here, and I'm going to pull this panel out. Just give me a little extra room to work. Just like that.What we need is we want a flat surface. I think I'm going to put it right in this area. I'm going to make sure that this area is clean. You can take some rubbing alcohol and a rag or paper towel. Just want to make sure it's good and clean. Take your double sided sticky tape here, press it into place, and stick it up there. Push it into place real good. Once you have that, then we'll mount our ground wire. We want to make sure our ground wire is on a metal surface, so I'm going to go right in front of the box here. You can see what I did. It's a 1/4" socket with our self-tapping screw. That's it. Then we can reinstall the panel.Now what I'm going to do is I'm going to take a 7/32", and I'm going to have six small bolts right across the back that are holding this section on that's for the heat shield. So, we'll lower that. What I'm going to do is I'm going to run my wire up and over because we want to keep it away from the exhaust. I'm going to route it through there. Now, if you have a wire hanger you can feed it through there if you wanted. Otherwise, you're probably not going to be able to get the wire to pull all the way through or push all the way through. So, I'm going to take it down, that way I can just tuck it in.I'm going to take both my 4-pole and my green wire. I'll just pull out on my fascia like this. Go ahead and leave the 4-pole here. We can reinstall our screws, and I'm going to show you where I ran that here. What I did is the only spot I could run it is right above my hitch, which again ran us right behind the heat shield. Run it across. We went under the same process with pulling the wire up to the passenger's side taillight. Then we can reinstall our panel underneath here.Next, I'm going to route my power wire up to the front of my vehicle. Let me get this done real quick, and I'll show you how I did it. You can see right here I went behind this panel, over the top of this cross brace. Right here you want to make sure you stay away from anything moving or hot. I went around this bracket that's holding my fuel tank up. Just routed around right to here and then went underneath this panel all the way up to the front. Put a zip tie on it right there and zip tie on it right here.Now, I am using an air line tube here. A wire hanger will work just as well. I just don't have access to one here. What you want to do is from your battery find a clear area that comes down to the bottom side of the vehicle. Now, we'll go up top, and we'll pull my two air line tube with my wire attached to it, and it'll just pull it right up to my battery. One thing I do suggest, look down there one more time while you have your wire up, double check to make sure you're not snagged on anything.Now, we're going to be attaching this to our positive side of our battery. I want to make sure my wire stays snug. I'm going to take a zip tie and zip tie this part of it right to my power wire or my positive battery cable there. And then I'm going to cut it down to size. Just put that inaudible 00:11:26 on that connector. Crimp down. What we're going to do is we're going to take our fuse holder, cut it in half, and we're going to strip both ends. We're going to put a ring terminal on one end, and our other end is going to go into the other side of our butt connector. Then we can take our heat gun, and we'll go ahead and shrink that butt connector up there.I'm going to take a 10mm socket, loosen this nut here. Then we'll attach the ring terminal to it. You want to make sure that you don't have the fuse in place when you make this connection because we don't want any backfeed to our wiring. Once we've made the connection, we're going to go ahead and put in our fuse. Now, we'll test out our wiring using part number I26. Left blinker. Right blinker. Brakes. Running lights.That will do it for our look at an installation on a Tekonsha T-One Vehicle Wiring Harness with 4-pole flat trailer connector, part number 118669 on our 2017 Ford Edge.


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118669

Average Customer Rating:  4.6 out of 5 stars   (39 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

- 118669
by:
2016 Ford Edge

I received the product on time and in good shape everything was as it was supposed to be when I ordered it simple directions and easy to install no problems whatsoever. My only issue which has nothing to do with the product, the issue was, I have a 5 wire flat on my trailer and I need to know how to convert the 4 wire I installed, to hook up to the 5 wire plug on the boat trailer. 522539


Comments

Everything has been ironed out and Im very satisfied with the product itself and how it is lasted until today.

Jim - 06/16/2019

56680

- 118669
by:
2015 Ford Edge

Still works. Not a single problem. Wasn't the easiest to install, but once installed it has been trouble free. 344525


Comments

Works perfectly. No problems.

Barry W - 02/22/2018

35023

- 118669
by:
2015 Ford Edge

Works as expected. Installation was a little problematic. Did not expect to remove the rear quarters to fish the wires through. The interior panels must be removed also. As I said, it works. 487820



- 118669
by:
2017 Ford Edge

I had previously installed a hitch on a 2014 Ford Edge and ran the wires inside the car. With my 2017 Ford Edge, the instructions were to run the wires under the car on the outside. This is not the product's fault, but running a wire from the battery at the front of the car to the hitch at the rear of the car proved to be way more difficult than I ever would have imagined! Ford has an undercarriage "sheathing" that, when coupled with the fact that I didn't want the wire anywhere near moving parts, made it pretty difficult! What I thought would take 10 minutes took over an hour! 487762



- 118669
by:
2017 Ford Edge

This harness is meant to be completely external to the car, according to the video. In other words, it does not cross through the trim inside the vehicles inner molding. Where the vehicle hatch lid closes. THIS HARNESS IS A LOGISTICAL NIGHTMARE TO RUN FROM DRIVES SIDE TAIL LIGHTS TO THE PASSENGER SIDE TAIL LIGHT OVER AND AROUND THE HITCH RECEIVER. Don't be fooled by the install "video" on a Ford Edge SEL. Trying to zip tie the wiring away from the hot exhaust pipes will take many zip ties and tricky placement to avoid damaged wires, not to mention, the wiring is exposed to all the elements. The "T" connector wires should be longer so they can be tucked out of the way so as not to interfer with trying to reinstall the tail lights back in place. You will notice, the training video is edited right after they tell you to put the tail lights on, but don't actually show the process of doing so. It is more difficult than it looks, because the "T" connectors hold the light assembly out from the body of thr car. It takes a lot of fooling around to get the connectors exactly in the right spot. This is why I say, the "T" connector wires need to be longer to get them out of the way. YOU'VE BEEN WARNED. Buy the wiring kit that goes under the trim, INSIDE the car. etrailer themselves is great to deal with, but not this wiring harness. I am glad no one was around when installing this wiring kit, summed up in one word, frustration. 529872



- 118669
by:

I gave the 2 stars because of the fast delivery of the product and for the beat quality of the product. I had problems with install of the wiring harness. I called for suggestions and was told to use a coat hanger to pull the harness up. Problem on my car, the harness plugs could not be pulled through because the factory plug was in the way and could not be removed. I had to try and remove it, cut the wires, fish the harness wire up and then splice them together again. The passenger side was harder because the fish wire was sent to smaller area of the frame. Wires are just long enough. The hitch was easier but the video shows easy installation because they have removed the entire exhaust system. This allows the installer to reach into the rear of the frame to pass the backing plate and bolt. Reaching into the space between frame and bumper is difficult since you can only use two fingers to feed the parts in. At times it is difficult to feed the fish wire into the correct spot. The rest of the installation was easy once the bolts were in place. 294450



- 118669
by:
2015 Ford Edge

I'm a pretty good DIY person, so when I saw a plug and play installation of trailer wiring specifically made for my Ford Edge, I couldn't believe it. Just in case you don't want to cut, splice, heat-shrink the factory light wiring circuit you can plug T connector in and install taillight back in place. The hardest part of this installation is the module power wire that has to be run from the rear bumper to the vehicle battery. Note: if you plan on making your vehicle a towable behind an RV like me, you should run both the 12V power wire and your toad trailering lights together saves having to install later. 485800



- 118669
by:
Ford Edge

Got it yesterday, had it installed this morning.. looks great.. I am now an etrailer.com fan and will be coming here for any vehicle need I have moving forward! 397706



- 118669
by:

Seamless integration and hidden in cargo space. No hiccups with functionality or installation. 658013



- 118669
by:

Fit was excellent, hitch went on easily. Wiring harness is a bit challenging and involved. 656596



- 118669
by:
2016 Ford Edge

Not the easiest to install, but it works as it should. 656176



- 118669
by:

This is the second product I purchased and all of them have been delivered with no problems. The instructions are as always very easy to follow. 643369



- 118669
by:
2015 Ford Edge

Excellent product, excellent how to videos and very good service!! 637381



- 118669
by:
2015 Ford Edge

Trailer Wiring Harness for 2015 Ford Edge: Harness is well made and plugs into existing sockets. Installation video is very helpful, but also somewhat deceiving. Running the plugs and wires up through the small area in the body's rear panels is not nearly as easy as shown. This proved to be the most difficult portion of the install. On the driver's side, I had to remove the existing wiring to feed the harness wiring due to room constraints. (Larger on this side than passenger side). Following this, I ran the original harness up through the passage. Once installed, everything plugs in as shown on the video. You will need to push the plugs and wiring back down into the passageway to reinstall the taillight assembly (sufficient wiring to do this). You also need to run a hot wire up to the battery. The Edge underside is all heat shields and cover plates, with little opportunity to snake a wire up to the front of the car (run on driver side where the battery is located). Looking down from the open hood, I saw a SMALL opening through to the pavement and ran a long rod down, taped the wire to it and pulled it up to the battery compartment. Previous to this, I had installed a 2 inch receiver hitch to the Edge. The harness was much more difficult to install than the hitch. Overall: Well made as said, works well, sufficient wiring if you choose the shortest paths. However, Difficult to install. Would not recommend installing yourself unless you have considerable patience. Probably worth taking to a shop with an overhead lift. 634468



- 118669
by:

Thanks etrailer! I installed my hitch and wire kit in short order,followed the video and WALLA!! ALL done!!! Thank You great product I’ll recommend to friends! 634421



- 118669
by:

Just received the parts. Haven't installed yet, so don't know about fit, quality, performance. Salesperson was helpful. 625545



- 118669
by:

Does the job with ease. Good instructions and exact fitting for my application. 611137



- 118669
by:
2016 Ford Edge

No problems no splicing just a little tight putting the tail lights back in. 596313



- 118669
by:

I would recommend this to any do it yourselfers Excellent product 577052



- 118669
by:

Works as described although video made it seems a bit easier than it actually was. 524915



- 118669
by:
2016 Ford Edge

Lightning Fast Shipping. The online video made the installation a snap. I highly recommend etrailer.com. 513699



- 118669
by:

as described shipped fast installation as in video instructions 494419



- 118669
by:

The trailer is doing great to haul our motorcycle to and back from Missouri 481980



- 118669
by:

Service was great! Instillation was fairly simple. The final out come was a great fit. Thanks guys you make a great product. 463738



- 118669
by:
Ford Edge

A must buy! Made this install so much easier. Great quality. Everything I needed for wiring was in kit. On my Ford Edge used wire loom to hide wires. 459629



- 118669
by:
2016 Ford Edge

Very satisfied with the product 438683


Comments

Excellent

Janice W - 10/02/2018

44241

- 118669
by:
2016 Ford Edge

I watched a you tube video and did it myself. Easy peasy 436617



- 118669
by:
2016 Ford Edge

Fast shipping, love the emails on the status of my order. I'll buy from Etrailer again for sure. Thanks, Shannon 422280



- 118669
by:

Shipping was fast. Product was as described, with all the parts needed for installation. The instructional video is great, after watching it I was able to perform the installation in about 2-3 hours. The product is working as expected. 421242



- 118669
by:
2015 Ford Edge

The Wiring harness was just as expected and it even had heat shrink connectors! Very nice it was as complete as it was, only thing I disliked was the power wire that I had to run to the front of the car was a splice connection to the new harness, I don't get why they just don't make that part of the harness. Great price, good quality. 404887



- 118669
by:
2017 Ford Edge

I haven't installed the hitch or wiring yet but the shipping was super fast. Ordered the hitch and wiring assembly yesterday at 3:15 p.m., received my order this morning at 9:10 a.m. Only way I could have gotten it any sooner would have been to go pick it up myself. 385012



- 118669
by:
2016 Ford Edge

Great product, little interesting feeding the connectors through body. Be patient and careful 383223



- 118669
by:
2017 Ford Edge

The harness was great, instructions were near perfect but did not say the screw holding the taillight may fall into hole and get lost when removed. I found a replacement for it. 381546



- 118669
by:
2016 Ford Edge

The fit is as advertised and it looks custom. It took less than an hour to install crawling on my garage floor by myself, so if you have a lift and a friend it's fun and easy. hook it up to my 5x8 landscaping trailer and all the lights worked perfectly with the wiring kit. highly recommend this hitch receiver. 325560



- 118669
by:

Nice product. Everything I hoped for. Delivery was quick. Good experience. 273655



- 118669
by:

Great product and speedy delivery 271131



- 118669
by:
2015 Ford Edge

Great Product, Fit perfect, Fast Shipme nt 234252



- 118669
by:

I always have a great experience with e trailer. 232489



- 118669
by:

This plug and play item fit right in. 224165


41
41

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

Do you have a question about this Custom Fit Vehicle Wiring?


  • Does Heat Shield Get Removed to Install Draw-Tite Trailer Hitch on a 2017 Ford Edge
  • The instructions for Draw-Tite trailer hitch # 75234 for the 2017 Ford Edge state "for Edge Sport and MKX AWD model, remove (6) bolts and (1) flange nut attached on center plastic panel with heat shields, see Figure 3, and then remove the panel. Return to owner." See instructions linked for reference. This means that on the affected models the heat shield would not be reinstalled. The hitch itself can act as a heat sink though so nothing is really lost with the removal. I have linked...
    view full answer...

  • Which Trailer Hitch for a 2015 Ford Edge has the Best Ground Clearance
  • Curt trailer hitch # C13234 and Draw-Tite trailer hitch # 75214, which is the comparable hitch, have the receiver and cross tube in basically the same place so they will have nearly identical ground clearances once installed. If anything the Draw-Tite hitch is a bit tighter to the bottom fascia. The bottoms of the hitches will be approximately 1-1/2 inches or so lower than the bottoms of the exhaust tips. If you are looking at Draw-Tite hitch # 75234 only the receiver will be visible....
    view full answer...

  • Parts Needed to Install 7-Way Trailer Wiring on 2017 Ford Edge
  • You will need to start with a 4-way (if you do not have one). For that you would want the # 118669. I attached an install video that shows this installed in a very similar 2016 Ford Edge as yours. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way...
    view full answer...

  • Do Trim Panels on 2015 Ford Edge Get Permanently Removed to Install a Trailer Hitch
  • The panels in question on the 2015 Ford Edge will either need to be removed or trimmed for the hitch installation. I would just remove them and store them in case you ever wanted to remove the hitch so that you could put the panels back on if you wanted. Neither removing them nor trimming them should void the warranty of the vehicle because you are protected by the Magnusson-Moss Warranty Act. Trimming or removal of the panels is required for any of the available hitches for your Edge. If...
    view full answer...

  • Wiring Harness for a 2017 Ford Edge SEL to Tow a Trailer and to be Towed Behind a Motorhome
  • The wiring harness that you need to tow a trailer with your 2017 Ford Edge SEL (or for any vehicle for that matter) will be different than the harness that you will need to be able to tow your Edge behind your motorhome. The Hopkins Custom Tail Light Wiring Kit # HM56011 that you mentioned will not fit your Edge. Instead you need to use magnetic lights like the Pilot # NV-5164. Your battery does need to be disconnected which will require two 50 ohm, 10 watt resistors so that the taillight...
    view full answer...

  • Where to Mount 4-Way Bracket on Draw Tite Hitch 75234
  • The Draw Tite hitch part # 75214 does have a bracket welded to the cross tube, but if you wanted to use the more hidden Draw Tite # 75234 we do have an option for mounting a trailer wiring bracket. A great solution for mounting a 4-pole wiring harness like Tekonsha # 118669 without having to drill into your bumper is to use a no-drill bracket like # C57202. The no-drill brackets include a ring clamp that secures to your hitch tube.
    view full answer...

  • Recommended Trailer Wiring Harness for a 2017 Ford Edge
  • The correct trailer wiring harness for your 2017 Ford Edge is the T-One Vehicle Wiring Harness part # 118669 if you have the SE or SEL model and part # 118677 if you have the Sport or Titanium model. I have attached an install video on each option for you. They are both essentially plug and play. The plug in the rear wheel well is not for the trailer lights and they do not make a harness for your Edge that uses this plug.
    view full answer...

  • Parts Needed to Mount 4-Pole Trailer Connector on 2016 Ford Edge
  • A great solution for mounting a 4-pole wiring harness like Tekonsha # 118669 without having to drill into your bumper is to use a no-drill bracket like # C57202 with the 4-pole bracket # 18144. The no-drill brackets include a ring clamp that secures to your hitch tube.
    view full answer...

  • Troubleshooting Trailer Wiring of 2016 Ford Edge Where Right Side Circuit Doesn't Work
  • Here's how we determine if the problem is the converter box of the trailer wiring harness you have installed on your 2016 Ford Edge.Test the wire green wire that runs to the converter box from where it attaches to the vehicle wiring. If there is voltage there with the blinker but it's weak on the other side of the box then the box is faulty. I suspect it is the converter box, but if you can test that for me we'll know for sure.
    view full answer...

  • Will Draw-Tite Trailer Hitch 75214 Interfere with Hands-Free Liftgate on a 2017 Ford Edge SEL
  • With Draw-Tite trailer hitch # 75214 installed on your 2017 Ford Edge SEL the Hands-free Liftgate sensor areas will be limited to areas away from the center where hitch receiver opening is located. It tends to vary a little from vehicle to vehicle. Some people have limited access, some don't, but I haven't heard of this hitch completely blocking the sensors. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch...
    view full answer...

  • Differences Beteween Curt Class III Trailer Hitch C13234 and C13224 for a 2015 Ford Edge SEL
  • The Curt Class III hitch, part C13224 is being replaced by the # C13234. Both hitches have the same stability and towing capacity, but the # C13234 fits ALL models of the 2015 Edge, while the C13224 fits all models with the exception of the Sport model. Curt is replacing the C13224 because fit-wise, the C13234 is more versatile and it makes more sense to have one hitch application that fits all models of a given vehicle. If you'll be using the hitch for towing purposes, you'll likely...
    view full answer...

  • Vehicle Blinkers Not Working Correctly After Installing Trailer Wiring Harness on 2017 Ford Edge
  • It sounds like your 2017 Ford Edge thinks that a bulb or bulbs are out which would explain why the one side blinks quickly and the other side does nothing. Trailer wiring harness # C56292 is designed for the Sport and Titanium models of the Edge so if you have an SE or SEL I recommend # 118669. If you do have a Sport or Titanium then check to make sure the white ground wire is attached to a clean and corrosion free bare metal surface. There can't be any kind of coating on the ground...
    view full answer...

  • Installing Trailer Hitch on 2017 Ford Edge
  • When installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75234 on your 2017 Ford Edge, the center plastic panel with heat shields will need to be removed. This will not affect the integrity of the bumper and the hitch itself will actually act as a heat shield so there will no loss when removing this panel. You will not need to make special brackets to support the bumper after the hitch is installed. I have attached an installation video on your 2017 Ford Edge so you can see...
    view full answer...

  • Trailer Hitch that is Mostly Hidden for a 2015 Ford Edge
  • Yes there are pictures showing Draw-Tite trailer hitch # 75234 installed on a Ford Edge. I have included a picture and there are also a couple in the instructions I have linked for you. This hitch is exactly what you are looking for. The cross tube is hidden and only the receiver is visible. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop....
    view full answer...

  • Parts Needed to Add and Control Electric Brakes on Trailer Behind 2016 Ford Edge
  • Let's start with your Jayco Pop Up Camper. To add electric brakes, you will need to have hub-and-drum assemblies already installed. If you just have idler hubs like the Dexter # 8-258-50UC1-EZ, you will need to install hub-and-drum assemblies that are compatible with the trailer spindles. The numbers stamped into your trailer's existing bearings and seals will help you determine the proper hub-and-drum assembly. You will also want to make sure you choose an assembly with the same bolt...
    view full answer...

  • Trailer Hitch and Wiring for a 2015 Ford Edge Sport
  • There is a trailer hitch that will fit your 2015 Ford Edge Sport. You can use trailer hitch # 75234. I have included a link to the installation instructions for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have...
    view full answer...

  • Does Installation Of Draw-Tite Trailer Hitch For 2016 Ford Edge Require Trimming Rear Fascia
  • Per the installation instructions for the Draw-Tite Trailer Hitch for your 2016 Ford Edge, the rear fascia is not trimmed. In the instructions it does say the fascia is lowered for the hitch installation but no mention is made about trimming. The laast step of the attached instructions say to reinstall the fascia along with the hardware. The # 75234 is a Class lll hitch and it has a 2-inch receiver opening. If you plan on doing some towing you might be interested in etrailer ball...
    view full answer...

  • Does the Power Need to be Run to the Battery When Installing the T-One # 118669 on a 2017 Ford Edge
  • The converter on the Tekonsha T-One # 118669 will need to have the Black wire run to your battery for the 4-Way connector to function properly. It is designed to draw power directly from the battery itself so that the wiring on your 2017 Ford Edge is not affected. The connectors basically get tripped when your brake lights/turn lights/ running lights are activated and tell the converter to send power to the trailer lights.
    view full answer...

  • Will Installing Trailer Hitch Increase Towing Capacity of 2015 Ford Edge
  • The Draw-Tite Class III Max Frame Receiver Hitch # 75234 referenced in your question is confirmed to fit your 2015 Ford Edge. While this particular hitch does have a higher towing weight capacity of 4,500 pounds it will not actually increase the towing capacity of your vehicle. You will still need to adhere to the 2,000 pound limit of the vehicle itself, as you are always limited by a system's weakest component. Because of this no aftermarket product will actually raise the factory towing...
    view full answer...

  • Fit Recommendation for 2016 Ford Edge Trailer Wiring Harness
  • The trailer wiring harness I recommend for your 2016 Ford Edge is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118669. This wiring harness is designed to fit Edges like yours that are neither Sport or Titanium models. The T-One Wiring Harness # 118669 will plug into your Edge's wiring behind the vehicle's taillights. This will not require you to splice into the factory wiring at all. You will need to run a power wire for the harness's powered converter...
    view full answer...

  • Trailer Wiring Recommendation for 2017 Ford Edge SEL
  • Trailer hitch and wiring installs are totally separate so if you don't need wiring yet for your 2017 Ford Edge there really isn't anything to gain by waiting to install it later. Since we have special shipping deals on orders over a certain amount though I would recommend ordering the wiring now so that you don't have to pay to have it shipped later if that's something you'd be interested in. Since we have the best luck with the Tekonsha brand trailer wiring harnesses I would recommend...
    view full answer...

  • Ford Edge SEL 2016 with Rear Door Sensor Trailer Hitch Recommendation
  • For your 2016 Ford Edge SEL the Draw-Tite part # 75234 has been confirmed as a fit and would work with the automatic rear door sensor. You just would be limited to the areas on either side of the hitch for activating the sensors. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,...
    view full answer...

  • How to Install a Brake Controller and 7-Way on a 2017 Ford Edge
  • Absolutely! For your 2017 Ford Edge, I recommend using either the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 or the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. The P2 and P3 are our two top selling brake controllers due to their integrated safeguards and built-in diagnostic checks. The main difference between the two is that the P3 has a nicer display with larger easy to use buttons. In order to install either of the above brake controllers you are going...
    view full answer...

  • Can the Tekonsha Prodigy RF # 90250 be used with a 2015 Ford Edge
  • The Tekonsha Prodigy RF Wireless Trailer Brake Controller # 90250 is basically a universal brake controller so it will work with your 2015 Ford Edge. The reason that our fit guide doesn't mark it as a confirmed fit is because it was built with vehicles in mind that people will have an exceptionally difficult time finding the Cold side of the Stop Light Switch which is what your everyday brake controllers get their signal from. Most people prefer the traditional hardwired brake controller...
    view full answer...

  • Draw Tite Trailer Hitch Recommendation for a 2016 Ford Edge
  • For a Draw Tite hitch for your 2016 Ford Edge SE or SEL model the part # 75234 would be the correct hitch to use as it is a confirmed fit and has a 2 inch opening which means more towing capacity and hitch accessories made for it. I attached an install video for more info. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
    view full answer...

  • Best Trailer Hitch and Wiring Harness for 2018 Ford Edge With Hands Free Liftgate
  • The trailer hitch I highly recommend for your 2018 Ford Edge SE is the Draw-Tite # 75234 because it has a concealed crosstube which hides everything but the receiver, and it will still allow you to use the hands-free liftgate feature on your Edge. You will only need to kick to the sides of the hitch receiver as opposed to the middle. If you take a look at the accompanying photo of the Draw-Tite hitch installed on a 2018 Ford Edge you can see that it is almost entirely hidden behind your...
    view full answer...

  • Recommended Towing Setup for 2018 Ford Edge SE for Travel Trailer
  • The hitch I recommend for your 2018 Ford Edge SE is the Draw-Tite Class III hitch # 75234. This 2-inch hitch bolts on, no drilling needed, using the included hardware packet. You can see the installation steps in both the linked instructions and the video we made that shows a 2018 Edge. For a 4-pole wiring kit you can use kit # 118669 from Tekonsha which installs through plugging in connectors at the car's tail lights and running one wire up to the battery to power the harness. The written...
    view full answer...

  • Trailer Hitch Recommendation for 2018 Ford Edge with Concealed Crosstube
  • For your 2018 Ford Edge we have the Draw Tite hitch part # 75234 that I recommend for you because it has a hidden crosstube which means it'll be less visible than most to give you the hidden look you want. It also has higher towing capacities and a 2 inch opening which most accessories are made for. I attached a picture and an install video for you to check out as well. For trailer wiring you'd then want the T-One kit part # 118669 which has our most reliable converter box and because...
    view full answer...


Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video by:
Joshua S
Video Edited:
Jacob T
Video by:
Dustin K
Test Fit:
Randy B
Video Edited:
Chris R
Photos by:
Zach O
Updated by:
Sarah W
Updated by:
Alexander C
Expert Research:
Victoria B
Test Fit:
Shane H
Video by:
Jonathan Y
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.