1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118427
lowest price pledge
Our Price: $53.23
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 0.76 lbs
Quantity: 
In Stock
Custom Fit Vehicle Wiring 118427 - Custom Fit - Tekonsha
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts. Call 800-298-8924 to order Tekonsha custom fit vehicle wiring part number 118427 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (263)
  • Q & A (50)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118427

  • Custom Fit
  • Trailer Hitch Wiring
  • Tekonsha
  • 4 Flat
  • Converter

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection point in rear cargo area
    • Plug in connector
  • Includes circuit-protected tail light converter to ensure that your vehicle's wiring matches that of your trailer
    • Provides protection against electrical shorts and overloads
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5 amps per circuit
  • 1-Year limited warranty


Installation

T-One Connection Location Points

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area.


Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.


It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.


Circuit-Protected Tail Light Converter

A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


This converter safeguards itself and your vehicle against possible electrical shorts and overloads with integrated short circuit protection. Just install the connector as indicated and rest assured that the wiring system of your vehicle will remain feedback-free.



118427 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118427 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118427

Average Customer Rating:  4.9 out of 5 stars   (263 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.

- 118427
by:

Just as simple to install as the videos show on their website. I had the interior panel open, plug was exactly where they said it would be, attached and all buttoned up in less than 15 minutes. 817591



- 118427
by:

Everything was easy to install. Video makes it easy to understand assembly. 810113



- 118427
by:

The ease of installation was great. Having access to all the tools that were necessairy made all the difference. 809323



- 118427
by:
2010 Honda CR-V

great producrt fast delivery and great fit installed 1hour 30 minutes 804219



- 118427
by:
2007 Honda CR-V

Great product. Super easy installation on my 2007 Honda CR-V. I’m not a mechanic nor any expert with cars/hitches, but I was able to complete it without any issues. I didn’t need a lift or anything. I had my brother hold it up for me as I hand tightened the bolts to at least hold it. Then I did everything by myself. No issues with the electrical part. 787372



- 118427
by:

easy install ! 786547



- 118427
by:

Item of high quality. Came very quickly. Detailed instructions, nothing missing. Very well packaged also. So many times I have received items from other companies that were damaged, sometimes beyond use because of poor packaging. Then try and return. Awesome service and product from etrailer. 784458



- 118427
by:

Worked great! Fit perfectly 772626



- 118427
by:

I was a bit annoyed that this product routed under the tailgate rather than through a grommet in the body. I even spent an extra $15 for the model that had the plug mounting bracket, only to find out it wasn't needed. Regardless, fit perfectly and was easy to install thanks to the video. 771651



- 118427
by:

Fit like it should, works like it should priced like it should be. Very happy with your product. 769466



- 118427
by:

I bought this hitch to pull a small trailer behind my Honda CRV. I installed it myself, which was straightforward and easy. I hauled it on an 8,000 mile vacation across the US and Canada, and it worked fine. I bought it from these guys because they seemed to have the best deal. Everything about the transaction, installation, and use has been exceptional. 768306



- 118427
by:

Working fine. 763664



- 118427
by:

Everything arrived fast ,and had no pro blems! 762276



- 118427
by:

Thank you for quickly replacing the defect part. Joe 694712



- 118427
by:
2007 Honda CR-V

Excellent product Quick shipping 692455



- 118427
by:

Just what I needed. Had to chase the treads with a tap. Wire brushing just wasn't adequate. Great job on your website and the videos on the electrical hookup hardware was very helpful. I actually purchased a different one than i had in the shopping cart after watching the video. Thanks Ken 681322



- 118427
by:

Well built, instructions easy, easy installation, actually looks good and shipped fast! Thank you! 679052



- 118427
by:

The wiring harness arrived in a timely manner, fit perfectly and was easy to install due to excellent instructions and the video I watched before I even ordered it. Some folks think it's silly that the wiring runs out the CR-V rear door opening during use, but I use a trailer so infrequently (a few times a year) that it is more important to me that the wiring is out of the elements when not in use. I prefer this type of hookup because I've seen what salty winter roads do to external trailer wiring. This setup will be better for my use. 677697



- 118427
by:

exact fit 653763


Comments
STILL WORKING LIKE NEW :
robert w - 06/06/2020

78905

- 118427
by:
2008 Honda CR-V

Having the item in stock and fast shipping was a plus. Simple to follow installation video, total time took about 20 minutes. 612508



- 118427
by:

Does what it's supposed to do. Wish it somehow attached to the outside next to the trailer hitch rather than having to be pulled out of the spare tire area each time 588532



- 118427
by:

Great directions. Also had a video I could watch on the install process. Was an excellent transaction. 567525



- 118427
by:
2011 Honda CR-V

CR-V 2011 This one took us a good hour to install, first timers and all. We were too hasty screwing in the little ground screw forgetting to put the ground wire in between.... Try to remove that. It took time to undo that. The 2 little plastic "pop screws" into the rear trim panel broke when I tried to pry them off, however they were still reusable. I wish the tutorial video would have been a little clearer on the 'how to'. It was a bit scary to remove the trim paneling, hoping we would not break off tabs etc. We tried the light harness and all the lights worked on the trailer. We will not use the harness a lot, so to have it like this (hanging out the rear door when in use) is okay with us. When not in use it is stored in the spare wheel compartment. 522728



- 118427
by:
2010 Honda CR-V

Excellent product and excellent customer service! I especially like the accompanying videos on how to install product on your website. 514404



- 118427
by:
2009 Honda CR-V

Seems fine. No sticky adhesive patch, though, that the video mentions. comes with screws to mount instead. Doesn't bother me, but then again, if you're not comfortable with that, you may have to find some industrial grade double-stick tape. 497750


27
269
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

  • How to Install a 7-Way on a 2011 Honda CR-V for Charging a Trailer Battery
    Absolutely! For your 2011 Honda CR-V I first recommend installing the T-One Vehicle Wiring Harness part # 118427 which is completely plug and play. You can see this process in the attached install video. Then in order to convert this 4-way into a 7-way I recommend using the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185 because it has a mounting bracket and both 4 and 7-way trailer connection points. The only two wires you will want to attach on the 4 to 7-way adapter is the ground...
    view full answer...
  • Which Trailer Wiring Kit is Best for 2007 Honda CR-V
    The best trailer wiring kit we offer for your vehicle is the Tekonsha kit part # 118427 as it installs the easiest and comes with the most reliable converter box. A wire does not need to get ran to the vehicle battery either. I wish we knew what the part number of just the Honda connector you'd need is but that's not something we can get. For your 2007 Honda CR-V we do not have a 7-way wiring kit that is plug and play.
    view full answer...
  • Tow Ready and Curt Wiring Harness Comparison for a 2011 Honda CR-V
    The Tow Ready T-One Wiring Harness, # 118427, and the Curt T-Connector Wiring Harness, # C55106, are basically the same harness from two different manufacturers. The main difference between these two harnesses is that Curt uses surface-mount technology (SMT) which is newer technology from the older through-hole technology. The Curt harness also has higher amp ratings of 3 amps per circuit for the stop and turn lights and 7.5 amps per circuit for the tail lights. The Tow Ready harness...
    view full answer...
  • Wiring 2006 Honda CR-V for Towing Trailer With Brakes
    For starters, you'll need to determine if your CR-V is capable of towing the trailer you're planning on using. In my research, I found that the CR-V has a 1500 lb towing capacity, so the trailer you want to tow will need to weight less than that. I'd urge you to consult your owner's manual or your Honda dealer to confirm that capacity for yourself. If you're wanting to tow a trailer equipped with electric brakes, you'll need to install a brake controller. I'd recommend a proportional...
    view full answer...
  • After Installing Trailer Wiring Harness on a 2011 Honda CR-V Vehicle Running Lights Stopped Working
    It does sound like it is a fuse but we need to figure out what caused the fuse to blow in the first place. Otherwise this problem will just keep happening. First, to verify that it is a fuse, you can use the owners manual and/or the legend on the power distribution box lid to find the fuse location. Leave the harness unplugged when you change the fuse. If the running lights on the 2011 CR-V start working then we know that there was a short somewhere that caused the fuse to blow. Check...
    view full answer...
  • Troubleshooting Trailer Left Turn Signal and Brake Lights On 2009 Honda CR-V
    First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue. Make sure that the trailer side and vehicle side...
    view full answer...
  • Are there Locking Tabs on the Trailer Wiring Harness Connector for a 2007 Honda CR-V
    There are at least 3 locking tabs on the connector on the trailer wiring harness # 118427. I have included a picture that shows them. You may need a small flat head screwdriver to pry and release the tabs so you can unplug the old connector.
    view full answer...
  • Finding Reverse Light Circuit on 2011 Honda CR-V to Install Back-Up Camera
    The reverse lamps for a 2011 CR-V are in the taillight assemblies, not on the liftgate. You can access the wiring harnesses that feed the taillight assemblies by removing the interior panel on either side of the cargo area. Use a circuit tester like part # 40376 to probe the wires in the harness, as a helper puts the car in reverse with the engine off. The correct circuit should be hot, so you shouldn't have any trouble finding the correct wire. I don't have any specific information on...
    view full answer...
  • Where is the Trailer Harness Connector Located on a 2007 Honda CRV in Guatemala
    It is possible that a Honda CRV sold in Guatemala will have different wiring, but I am not familiar with vehicles sold outside of the U.S. and Canada. What I can do is tell you where the connector should be located, whether or not it is there could be dependent on where the vehicle was sold. The connector is behind the access panel on the left side of the vehicle. I have included a link to a video of an installation of this part in a 2008 CRV so you can see how he did it.
    view full answer...
  • Trailer Wiring and Brake Controller Recommendation for a 2011 Honda CR-V
    The Tow Ready Wiring Harness part # 118427 that you referenced has been confirmed to fit your 2011 Honda CR-V and DOES include a taillight converter. You would not need to purchase a converter separately. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For...
    view full answer...
  • Installation Instructions for T- Connector Trailer Harness on a Honda CRV
    The connection point is located behind the interior trim panel in the cargo area on the driver side. The 4-pole trailer connector will be stowed inside the cargo area of the vehicle. You will need to open the rear door of the vehicle and temporarily remove the rear threshold, cargo net and cargo cover to allow access of the rear interior trim panel on the driver side (it may be helpful to fold rear seat forward). Carefully pull back the interior trim panel on driver side. Then locate the...
    view full answer...
  • Troubleshooting Trailer Light Malfunctions on a 2009 Honda CR-V
    From what I understand, at first, none of the lights worked. Now, with a trailer connected and the running lights on, you get a hot signal with every connection. First, you will have to disconnect the trailer to do some testing. Start by using a circuit tester to test the wires going in to the converter. Test each function separately. Turn signals, tail lights and stop lights. If these are all correct, move on to the wires coming out of the converter. Test each function again for these...
    view full answer...
  • Parts Needed to Wire a 2010 Honda CR-V With Diodes for Flat Towing Behind a Motor Home
    In order to wire a vehicle for lights to be flat towed, you have a couple of options. However, you will not be able to use the vehicles wiring harness as it does not accept input signals. Instead, you can wire the vehicle with diodes. There are 2 ways in which to wire a vehicle that has a 3 wire system like your 2010 Honda CR-V. It can wired to works as a 2 wire system, or it can be wired to run as a 3 wire system. In either case, you will need Roadmaster Universal Hy-Power Diode Wiring...
    view full answer...
  • Recommended Plug-In Wiring Harness With 4-Way Connector For 2011 Honda CR-V
    We do have a simple plug-in wiring harness with a 4-way trailer connector that is designed to fit your 2011 CR-V. I recommend the Tow Ready Wiring Harness, part # 118427. This harness simply plugs into the vehicle wiring in the rear cargo area behind the trim panel on the driver side. You simply plug in the connector, attach the white ground wire to a clean metal surface, attach the included converter, and you are good to go. I was unable to find the part number you referenced. I...
    view full answer...
  • What Is Needed To Install The Tow Ready T-One Wiring Harness # 118427 On A 2010 Honda CR-V
    The Tow Ready T-One Wiring Harness, # 118427, will plug into the white trailer tow plug on your 2010 Honda CR-V, located behind the drivers side rear interior trim panel. You will also need to attach the white ground wire on the wiring harness to the vehicles existing ground stud or another suitable grounding point. You will not have to do anything with the fuses under the hood of your 2010 Honda CR-V. That will be all that is needed to install the Tow Ready wiring harness to your...
    view full answer...
  • Ball Mount, Ball, and Trailer Wiring Harness Recommendations for a 2010 Honda CR-V
    I will be happy to get you the rest of the parts you will need to tow the rental trailer with your 2010 Honda CR-V. First for a ball mount we need to determine the hitch class you installed on your CR-V. Different hitch classes require different sized ball mounts and for the 2010 CR-V there are Class I and Class III hitches available. A Class I hitch will have a 1-1/4 inch receiver. A Class III will have a 2 inch receiver opening. If you have a Class III hitch with a 2 inch opening I...
    view full answer...
  • Can T-One Vehicle Wiring Harness # 118427 Be Routed Outside and Under a 2008 Honda CR-V
    On a 2008 Honda CR-V, you could mount the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118427, on the outside of the vehicle instead of on the inside like shown in the video linked below. What you will need to do is find a grommet or exit port at the bottom of the cargo bay (you will probably have to remove the spare tire). You will need to cut a small slit in the grommet to fit the wires through. After cutting the grommet, be sure to seal it up with some silicone sealant...
    view full answer...
  • Parts Needed to Add a 7-way to a 2010 Honda CR-V
    For your 2010 Honda CR-V you will first need to start with a 4-way if you don't have one since there are no 7-way options for your vehicle. For that you will want the # 118427 if needed. Now to convert it to a 7-way all you will need is the # 37185. This will plug right into the 4-way of your CR-V and will provide you with a 4-way and a 7-way. If you permanently mount this part it would be just like having a 7-way installed.
    view full answer...
  • Troubleshooting Trailer Taillights that Don't Function Correctly When Headlights are On
    It sounds like the problem is in the ground circuit. Any time we have seen taillight circuits stop working when headlights get turned on we know the problem is the ground circuit. Since your ground wire got ripped off at one point I would make sure it is reconnected well. And you should make sure your taillight assemblies are grounded well to a clean metal surface. Some assemblies ground through the mounting hardware so you would want to make sure they are installed onto a clean metal...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2010 Honda CR-V With Tow Daddy Tow Bar Wiring
    The Tow Daddy flat towing harness you have installed on your 2010 Honda CR-V wouldn't interfere with the trailer wiring harness part # 118427 that is recommended for your vehicle. The two use different installation ports on your vehicle so they would work just fine. The Tow Daddy would plug inline with your taillights and the # 118427 plugs into the taillight wiring port of your vehicle. See the install video I attached.
    view full answer...
  • Recommendation for Class III Trailer Hitch Receiver for 2011 Honda CR-V
    A Class II hitch would use a 1-1/4 inch receiver, for a 2 inch receiver tube you'd want a Class III hitch. We offer two US Made Class III hitches that I'd recommend, the # 13555 from Curt or the # 306-X7291 from EcoHitch. Both hitches share the same 350 lb tongue weight/3500 lb gross trailer weight capacity. The primary difference between the two is that the EcoHitch model installs so the majority of the hitch is concealed behind the bumper and fascia so only the receiver tube and the...
    view full answer...
  • Towing Capacity of 2011 Honda CR-V and Parts Needed to Tow
    I took a look at the owner's manual of your 2011 Honda CR-V and it says that the "maximum allowable weight of the trailer and everything in or on it must not exceed 1,500 lbs" so that would be the most a trailer and all its cargo can weigh. If you do find a camper with a GVWR of 1,500 lbs or less you could tow it but would need to start with a trailer hitch and I highly recommend the Draw-Tite Trailer Hitch # 75547 because it is a no-drill installation and the company has a strong reputation...
    view full answer...
  • Difference Between Square and Round Tube Trailer Hitches for 2010 Honda CR-V
    There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame # 24792, feature a square tube design, while the Class III hitches like the Draw-Tite # 75547 have a round crosstube. This crosstube shape may appear to indicate the hitch's strength, as they differ between the two classes, but the design is typically only relevant to the physical appearance of the hitch. A round...
    view full answer...
  • Installation of Parts to Tow a Trailer with a 2008 Honda CR-V
    We do have a couple of videos of a hitch and wiring harness being installed onto a 2008 Honda CR-V. I've linked them both to this page for you. The Curt trailer hitch receiver, part # 13555, and wiring harness, part # 118427, are both confirmed to work for you. You also might be interested in our ball mount kit, part # 989900, to complete you towing setup. I've linked our seletion of ball mounts to fit the hitch if you'd like to take a look at others that we offer. I've also attached...
    view full answer...
  • Brake Controller and 7-Way Trailer Connector Recommendation for 2008 Honda CR-V
    To install a 7-way trailer connector on your 2008 Honda CR-V, the parts you need will depend on how the trailer is equipped. If the trailer doesn't have brakes, and you don't need a 12-volt power feed to maintain a trailer mounted battery, you'd install a # 118427 wiring harness to provide lighting functions then use a # 37185 adapter. Plug the adapter into the plug provided by the # 118427 and ground the white wire to the vehicle's frame or chassis. The remaining wires could be bundled...
    view full answer...
  • Towing Capacity for 2007 Honda CR-V
    I looked up the towing capacity for your 2007 Honda CR-V and it looks to be 1,500 lbs as the max capacity for the vehicle. I'm not sure if your trailer would weigh less than that but we do have everything you'd need to tow a trailer with your vehicle. For a hitch the Draw Tite # 75547 would be a great option. It has a 2 inch hitch opening and installs easily. See install video. Then for trailer wiring you'd want the T-One kit part # 118427 which is also a confirmed fit. This is our most...
    view full answer...
  • Hidden Hitch With 2 Inch Receiver for 2009 Honda CR-V
    We have the exact part you need, though it is just under a different name. The Draw-Tite Max-Frame # 75547 is simply the Hidden Hitch 87440 with a different name; this is a Class III, 2-inch hitch that is a confirmed fit for your 2009 Honda CR-V. It is a complete bolt-on installation that does not require any drilling into your CR-V's frame; I've added a link to a video of this hitch being installed on a '09 CR-V for you to take a look at. To add a 4-way to power your trailer's lights...
    view full answer...
  • Curt Class III Trailer Hitch and Wiring for a 2011 Honda CR-V
    There is only 1 Curt Class III trailer hitch for your 2011 Honda CR-V and it is # 13555. You will not have to cut, trim, or drill anything for installation. It isn't all that hidden though but then again none of the available hitches for your CR-V are hidden. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2008 Honda CR-V
    I would need to know which trailer hitch you have on your 2015 Honda CR-V to confirm, however the Draw-Tite # 75742 and Curt # C13119 are only a confirmed fit from years 2012-2016 so the model years most likely are not compatible. For your 2008 Honda CR-V, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75547. This hitch is a confirmed fit for that model year and I've attached an installation video to assist. This hitch is designed to allow for the Tow Ready J-Pin Stabilization...
    view full answer...
  • Trailer Hitch and Wiring for a 2011 Honda CR-V to Tow a Motorcycle on a Trailer
    Not at all. Tongue weight is the downward forced applied at the hitch receiver. Tongue weight is typically 10 to 15 percent of the gross trailer weight. So for example if a trailer weight 2,000 pounds total including cargo then the tongue weight would be around 200 to 300 pounds. I have linked a help article to the right that shows how to determine tongue weight. However, even though the trailer hitch is rated for 350 pounds tongue weight, your 2011 Honda CR-V is rated lower, and you...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Andrew L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.