T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118416

lowest price pledge

Retail:$31.13

Our Price: $20.94

You Save: 33%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.56 lbs

Quantity: 
In Stock
Tekonsha No Converter Custom Fit Vehicle Wiring - 118416
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Tekonsha
  • No Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Call 800-298-8924 to order Tekonsha custom fit vehicle wiring part number 118416 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.


  • All Info
  • Reviews (234)
  • Q & A (128)
  • Videos (14)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118416

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind driver's-side tail light
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side tail light. You will have to remove the tail light assembly to access this harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118416 Tow Ready T-1 T-Connector - 4 Wire



118416 Installation InstructionsInstallation Details 118416 Installation instructions

This Product Fits The Following Vehicles

2018 - 2018 Jeep JK Wrangler with Standard Rear Bumper

2018 - 2018 Jeep JK Wrangler Unlimited with Standard Rear Bumper

2007 - 2017 Jeep Wrangler with Standard Rear Bumper

2007 - 2017 Jeep Wrangler Unlimited with Standard Rear Bumper

2018 - 2018 Jeep JK Wrangler without factory Tow Package

2018 - 2018 Jeep JK Wrangler Unlimited without factory Tow Package

2007 - 2017 Jeep Wrangler without factory Tow Package

2007 - 2017 Jeep Wrangler Unlimited without factory Tow Package



California residents: click here


Video of T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Wiring Harness Installation - 2012 Jeep Wrangler

Alright, today on this 2012 Jeep Wrangler were going to install part number 118416 from Tow Ready. First thing we need to do is go ahead and remove the tail light. And then we'll go ahead disconnect our tail light right here, push down on this tab and it should come right apart. Alright, now we'll take our T1 harness, we're going to take the 4-pole and rout it inside the body for now. And then we'll test the matching in of our T1 connector to the factory wire harness and snap it together. Alright now were going to take our white wire with the ring terminal, peel this back a little bit and run it down outside to the frame for our ground point.

And now you can take your wire harness and route it over to the center towards the hitch. Ok, we're going to leave our wiring alone for now. Now we'll go ahead and take our ground wire and ground it to the frame. At this point we can go ahead and reattach our wire harness to the tail light and then go ahead and reattach the tail light. To secure our wire harness were going to use a bracket to hold our 4-pole in place.

We'll be using part number 18140, the Universal Mounting Bracket, and part number 18144, the 4 Flat Connector Mounting Bracket. We'll go ahead and use a clamp to attach this to our cross beam. Now we'll take our 4-pole harness. We'll just go ahead and run it through it and pull it through. Now let's take some time to zip tie our wires safe and out of the way and away from the exhaust.

And with that our wire harness is installed. And there you have it for part number 118416 from Tow Ready in our 2012 Jeep Wrangler.


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118416

Average Customer Rating:  4.9 out of 5 stars   (234 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

- 118416
by:
2011 Jeep Wrangler

Order received a day after the estimated date. No problem, that's the USPS for you. Installed the harness. The video says about 5 minutes. They are close. The only issue that I had was difficulty finding a place to drill and attach the white ground wire. Basically a plug and play harness. I wish that I had ordered a mounting bracket. The one that is on my 2011 Jeep Wrangler Unlimited is a bit large and the plug is too small to stay put once it is in the bracket. Will manufacture something to hold the plug so that it stays in place. 71794



- 118416
by:

Ordered a trailer wiring harness for my vehicle. I got exactly the right wiring kit with easy to follow instructions. The wiring kit installed easily and worked perfectly for my application. 237576


Comments

After a year in service, the product is still performing perfectly! Thanks for a great product!

Steve J - 02/10/2017

22439

- 118416
by:

always the best ! 697914



- 118416
by:

excellent fit and finish on hitch, plug and play on wiring harness. only slight issue to find a clean ground and fabricate flat 4 connector bracket. this is my seventh hitch over the years and definitely the easiest one yet. 696164



- 118416
by:

Great service. Product came quickly and in great condition. It works great. I haven't had any issues with it in the first year. 678664



- 118416
by:

Put together very well and easy to install. Would definitely buy again 663878



- 118416
by:

Prompt shipping, good fitment 656173



- 118416
by:

Extremely happy with my purchase. 648052



- 118416
by:

I received the package last night - installed the hitch without too much trouble. Getting ready to wire this afternoon and head off for the weekend. Thanks for getting it here on time! 640136



- 118416
by:

Simple to install took maybe 20 min. From start to finish. 636557



- 118416
by:
2012 Jeep Wrangler Unlimited

Worked perfect! Very easy to hook up 633989



- 118416
by:

Fast shipping and confirmation email for order being delivered 628194



- 118416
by:

It was was well priced. Exactly as advertised. And the quality was excellent. It works well too! 622045



- 118416
by:

Easy install, works as advertised 621608



- 118416
by:
2018 Jeep JK Wrangler

Great quality, bought one from another vendor with hitch thinking I was getting a good deal, wrong-- backup lights on and no break lights when engine was running person said I didn't buy it from them even though box said it did. Will buy from e-trailer from now on,,,,,, 611793



- 118416
by:
Jeep

Will need to be modified for a right hand drive jeep... have to install a jumper wire to use. Will work fine for a left hand drive but wish i would have known that while installing as it would have saved time. Other wise it is a well built product. 611600



- 118416
by:

The best Product, (Jeep wiring harness); the BEST pricing I could find, anywhere; AND EXCELLANT SERVICE and Follow-up. It's refreshing to deal with real 'Customer Service"!! Thanks Kevin.... 611303



- 118416
by:

Good quality product , no problems with installation or function. 610702



- 118416
by:
Jeep

Bolted right up. Had to finish drilling out rough holes Jeep left for me. Harness connector was plug-n-play easy. Trailer harness routing with wire ties looks nice and neat. No dangling wires. 610480



- 118416
by:
2015 Ford Edge

Used existing small hole near edge under rubber base for ground with a nut & bolt. Cleaned hole with sand paper for good ground. Had to pull apart ground wire for an extra 5" to reach hole. Easy install, took about 15 min. for installation. 608795



- 118416
by:

Easy Install. As illustrated. Nice item. 607954



- 118416
by:
2015 Hyundai Santa Fe

Quick delivery, great quality and easy instructions made for a quick install! 607775



- 118416
by:

Excellent and easy to install! 599380



- 118416
by:
2017 Jeep Wrangler

Fast easy install 590616



- 118416
by:
2013 Jeep Wrangler

Very easy to install. It took longer to securely fasten wires to frame than it did to remove the tail light and plug it in as directed. Also purchased the 4 prong mounting bracket to give it a professional look when finished installing. 584087



- 118416
by:

Just what I needed without having to cut, strip, and hope all the connections have been made correctly. Snap and click are all I needed to hear. Completes the installation of the hitch. 582823



- 118416
by:

Great product. Easy to install. E trailer best products for your auto. 575494



- 118416
by:
2017 Jeep Wrangler Unlimited

Perfect fit no troubles 575111



- 118416
by:

Great product. Easy to install. Needed a different plugin then what we has originally ordered and their product support was very helpful and knowledgeable. 570559



- 118416
by:

118416 installation went very well. No problems encountered. Applied dielectric grease to all plug connections, this should be part of installation procedure. 569140



- 118416
by:
2016 Jeep Wrangler Unlimited

Superb product. Great delivery. 565359



- 118416
by:

Connectors fit perfectly, and the unit was easy to install. 560411



- 118416
by:

Good instructions, easily installed. Took me less than 1 hour since you just plug it right into your current light. Running the wires is also easy since their is an opening inside the light area. 542334


Comments

No problems! Works great.

Ronald M - 07/16/2019

57859

- 118416
by:

Easy to install, no need to cut wires or break any tab. I bought an « L » bracket and attached it on the Draw Titr hitch and the final look is close to an OEM quality. 530141



- 118416
by:
2018 Jeep JK Wrangler

Product is high quality. Only complaint is that it should have more than just zip ties to fasten. Ideally it would have some cable clips that secure two holes in the frame of the vehicle like other competing products have. 514531



- 118416
by:
2017 Jeep Wrangler

etrailer ordered one day, delivered to my door in the next day!! Easy to install on 2017 Jeep Wrangler Unlimited. Remove driver taillight, ground it, plug it in-line with current wiring, feed 4 plug connection to center of bumper and secure. VERY EASY 511107



- 118416
by:
2017 Jeep Wrangler

Fit great, quick and easy install 495789


Comments

Been a year and has never failed to work, many trailers later and I would still recommend product and etrailer

Lee - 04/12/2019

52828

- 118416
by:
2014 Jeep Wrangler Unlimited

Got exactly what I ordered in a timely fashion. 495312



- 118416
by:

Everything I ordered arrived in a timely matter and were just as advertised. It was all quality merchandise and fit perfectly. The price was also great. Could not ask for more. 495460



- 118416
by:
2017 Jeep Wrangler Unlimited

Wiring harness was straight forward, easy to follow directions. 494686



- 118416
by:
2003 Ford F-150

This was just what I needed and it was easy to install. 492040



- 118416
by:

Packaged good. Item great. 486750



- 118416
by:

etrailer has never let me down. Always get the correct product and great instructions. I have thier products on several vehicles for many years. 477840



- 118416
by:

Installed in 10 minutes. Works like a charm! 476337



- 118416
by:

Works just like described. Very easy to install and completes your hitch installation. 466973


Comments

Amazing. You would think it was factory.

Richard - 01/13/2019

48481

- 118416
by:

Very straight forward hookup, excellent design and quality. No need to worry about corroded splices with the plug and play connectors. 461694



- 118416
by:
2014 Jeep Wrangler Unlimited

Easy installation! This went on a right hand drive vehicle so I had to make a slight modification. No big deal., 458806



- 118416
by:

All installation instructions were clear, all parts were in box and the ease of installation was rewarded with it working first time. 454576



- 118416
by:
2017 Jeep Wrangler

Perfect and fast! Thanks! 445402



- 118416
by:

My wiring harness arrived quickly and it was a simple 10 minutes or less plug and play install 443688


51
238
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

Do you have a question about this Custom Fit Vehicle Wiring?


  • Installing an Electric Brake Controller on a 2017 Jeep Wrangler Unlimited
  • From my research your 2017 Jeep Wrangler Unlimited should already have all of the fuses and relays it needs to tow a trailer. You can check your owner's manual and verify the fuses to be absolutely sure. Whether it is equipped for an electric brake controller will depend if have a factory 7-way trailer connector. If you do, then you will have everything you need except the controller. For a brake controller I suggest the Prodigy P2 # 90885 because of its reliability. There isn't...
    view full answer...

  • Recommended 7-Way And 4-Way Wiring For 2017 Jeep Wrangler Unlimited Sport S
  • For your 2017 Jeep Wrangler Unlimited Sport S, I recommend you start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118416. The connection points for this adapter are behind the driver's side tail lights. Then you will want to use the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring - Vehicle End # HM40975-11998 to hardwire to that 4-way. Next, you will want to use the Draw-Tite Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer...
    view full answer...

  • Adding a 7-Way Trailer Connector and Electric Brake Controller to 2011 Jeep Wrangler Unlimited
  • Since your 2011 Jeep Wrangler Unlimited has the factory tow package there should be a square plug for the Pollak # HM40975-11933 to plug into. This will work well to supply a 7-way trailer connector. If you need to run wiring to install a brake controller use # 5506. If you don't have the square connector you'll first need to add a 4-way using # 118416 and then convert that 4-way to a 7-way using our # ETBC7 kit. This includes the 7-way and everything you need for an electric brake...
    view full answer...

  • What Is Needed To Tow a Trailer With a 2015 Jeep Wrangler Unlimited
  • According to the owner's manual for your 2015 Jeep Wrangler Unlimited, the towing capacity can range from 2,000 lbs to 3,500 lbs. The components that you listed (transmission cooler/upgraded suspension components) will certainly improve your towing experience however, in the eyes of the manufacturer the towing capacity will remain unchanged for the life of the vehicle no matter what parts are added. The other issue you are going to run into is that they do not make a trailer hitch for your...
    view full answer...

  • Trailer Hitch Receiver to fit a 2017 Jeep Wrangler Unlimited 75th Anniversary Ediiton
  • I'm fairly certain the 75th Anniversary edition of the 2017 Jeep Wrangler Unlimited uses the same rear bumper as the Rubicon model. If I'm wrong about this let me know and send me a picture of your rear bumper if you can. This way I can make a correct recommendation. If I'm correct then we have three hitch receivers that actually fit your Jeep even if our site says they only fit the "Standard Rear Bumper" Curt receivers # 9883544 and # 13432 as well as the Draw-Tite # 76104 all fit...
    view full answer...

  • Recommended Trailer Hitch Receiver for 2018 Jeep Wrangler Unlimited JK and JL Models
  • All of the JL Wrangler Unlimited hitches we carry will work on the JK Wrangler Unlimited models, but there are some JK model hitches that are not compatible with the JL Wranglers based on fit guide from the manufacturer because they have a shorter receiver. The bolt mounting holes are in the exact same location. Unless you are doing rock crawling, I recommend getting the longer receiver like the # e98856 or Curt # C13392 which will allow more accessories such as bike racks and cargo...
    view full answer...

  • Installing Trailer Wiring Harness on 2018 Jeep JL Wrangler Thats Also Wired for Flat Towing
  • You can absolutely install the Tekonsha T-One Vehicle Wiring Harness # 118786 (which is indeed the correct harness for your 2018 Jeep JL Wrangler) on your vehicle that already has a Blue Ox Diode Kit installed for flat towing. The two kits won't interfere with each other and won't cause any type of issue with regards to the electrical system on the Jeep. When installing the T-One Harness you will follow the attached instructions just like normal, connecting the plugs to the factory...
    view full answer...

  • 2013 Jeep Wrangler Unlimited 5-Way Trailer Wiring Harness Recommendation
  • If all you need is a 5-way for your 2013 Jeep Wrangler Unlimited what you'll need is a custom fit 4-way like the Tekonsha kit part # 118416 and then to convert it to a 5-way part # 20036 and you'd be set. The part # 118416 installs by attaching inline with the taillight connectors of the Jeep and then the # 20036 plugs into the 4-way and allows you to run the 5th wire to the reverse light circuit of your vehicle and you have a functioning 5-way.
    view full answer...

  • Recommended Brake Controller and Wiring for 2017 Jeep Wrangler Unlimited
  • To add a brake controller to your 2017 Jeep Wrangler Unlimited you will need to start with installing a 4-way trailer connector, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118416; I have added a link to a video of this harness being installed on '17 Wrangler Unlimited for you to check out. You will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7, which will give you a 7- and 4-way trailer connector, circuit breakers and the rest...
    view full answer...

  • Recommended Brake Controller and 7-Way for 2017 Jeep Wrangler Unlimited
  • We have everything you need to get your 2017 Jeep Wrangler Unlimited set up so that it can pull your trailer that is equipped with electric brakes. You will need to start by installing a 4-Way trailer connector. For this I recommend the Tekonsha T-One Vehicle Wiring Harness # 118416. This custom harness will plug right into the factory port behind the driver's side tail light. Tekonsha is well known for producing reliable and long-lasting wiring products. I have attached an installation...
    view full answer...

  • Does Pollak 7- and 4-Pole Trailer Connector have 12 Volt Hot Lead for 2014 Jeep Wrangler Unlimited
  • Yes, the 7-Way part of Pollak 7- and 4-Pole Trailer Connector # HM40975-11933 has a 12 volt circuit provided that the vehicle it is installed on has that circuit active. This part is designed to work with a 2014 Jeep Wrangler Unlimited that came with a factory 7-Way. If your Jeep came with a factory 4-Way or no trailer connector then it is not likely that the 12 volt and any other circuit other than the lighting circuits will work. To add a 7-Way if the Jeep did not come with a factory...
    view full answer...

  • How to Install Prodigy P2 Brake Controller in 2011 Jeep Wrangler Unlimited
  • The Prodigy P2 Electric Brake Controller # 90885 will fit your 2011 Jeep Wrangler Unlimited because brake controllers are not vehicle specific. What is vehicle specific are the custom wiring harnesses. Your Jeep does not have the connector under the dashboard for a custom harness to connect to so it will need to be hardwired. If you need a harness to hardwire the controller use # 20127. If you don't already have a 7-way trailer connector on your Jeep use our # ETBC7 kit to install...
    view full answer...

  • What is the Towing Capacity of a 2013 Jeep Wrangler and Parts Needed to Tow a Trailer
  • Most versions of the 2013 Jeep Wrangler are rated to tow a maximum of 2,000 pounds. But there are a few models that have a 3,500 pound towing capacity. The models listed below have a 3,500 pound capacity. If you do not see your model then it will be rated for 2,000 pounds: 3.6 liter motor, manual transmission, 3.73 axle ratio, Four-Door Sport Model (4WD) 3.6 liter motor, automatic transmission, 3.73 axle ratio, Four-Door Sport Model (4WD) 3.6 liter motor, manual transmission, 3.73...
    view full answer...

  • Recommended Trailer Wiring Harness for 2017 Jeep Wrangler without Tow Package
  • Both the Tekonsha T-One Vehicle Wiring Harness # 118416 and the Curt T-Connector Harness # C55124 referenced in your question are confirmed to fit your 2017 Jeep Wrangler without the tow package. These will both install in the same exact manner, plugging directly into existing ports located behind the driver side tail light on your vehicle, and will provide a 4-way flat for connecting with a trailer. The only difference between these two products is simply the manufacturer. I like to...
    view full answer...

  • Parts Needed to Add a 7-Way Connector to 2012 Jeep Wrangler Unlimited Without Factory Tow Package
  • I have everything you need to install a 7-way trailer connector on your 2012 Jeep Wrangler Unlimited without the factory tow package, however, the Hopkins Endurance Quick-Install 7-Way Connector, # HM42190, will not fit because it was designed for vehicles with a factory tow package. The previous question that you referenced is about a 2013 Jeep Wrangler Unlimited with the factory tow package. To install a 7-way trailer connector on your Jeep, you will first need to install a 4-flat...
    view full answer...

  • Parts Needed to Install Trailer Brake Controller on 2009 Jeep Wrangler Unlimited
  • As long as your 2009 Jeep Wrangler is equipped with the factory tow package, the items you listed will all work for the Jeep just the same as they do for the 2017 model Wrangler. The Hopkins Endurance Quick-Install 7-Way Trailer Connector # HM42190 will work perfectly to provide you with a fully functional 7-Way. The Tekonsha Prodigy P3 Brake Controller # 90195 is an excellent choice and exactly what I would recommend, and the Wiring Kit # 5506 is what is needed to run wiring to the...
    view full answer...

  • Will a Trailer Hitch Fit a 2016 Jeep Wrangler Sahara 75th Anniversary Edition
  • The trailer hitches listed for the 2016 Jeep Wrangler will not fit Limited Edition or Special Edition models unless they have the same rear bumper as the regular Jeep Wrangler. Limited/Special edition models can have an alternate rear bumper that would interfere with installation of a hitch. If your 75th anniversary edition has the regular Wrangler rear bumper then I recommend hitch # 9883544. This is the most cost effective hitch option for your Jeep. I have linked a video showing an...
    view full answer...

  • Recommended Wiring for 7-Way Trailer Connection on 2017 Jeep Wrangler Rubicon Recon
  • I'm happy to assist you with the wiring for your 2017 Jeep Wrangler Unlimited. I recommend you start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118416 to get the 4-way you need for the next step. This will install to the factory wiring behind the driver's side tail light. Next, you will need the Universal Brake Controller Wiring Kit # ETBC7. This kit will give you the connector to convert your 4-way and also give you the other wiring, circuit breakers,...
    view full answer...

  • Brake Controller Installation-2013 Jeep Wrangler Unlimited
  • The 2013 Wrangler Unlimited isn't equipped with a plug-in connector for installing a brake controller, but you can still hardwire the controller. The install isn't terribly difficult, we have some resources to help you though the installation. How you'll proceed with the install will depend on how your Jeep is equipped. If it has the factory 7-way trailer connector, under the dash in the vicinity of the emergency brake pedal, you should find a coiled up light green or blue wire that...
    view full answer...

  • Brake Controller, Hitch and Wiring for 2017 Jeep Wrangler Unlimited
  • To start with, the Draw-Tite Trailer Hitch # 76104 would be a great choice for your 2017 Jeep Wrangler with a standard rear bumper; it is a Class III hitch with a 675 lb tongue weight capacity and 4,500 lb towing capacity. In terms of a brake controller, you will need both a 4-way and the # ETBC7 kit as they work together. I recommend going with the Tekonsha # 118416 for your Jeep, as they have been highly reliable in terms of their wiring products. The Universal Installation Kit...
    view full answer...

  • Recommendation for Adding 7-Way and 4-Way Trailer Connector to a 2013 Jeep Rubicon without Tow Pkg
  • Without the factory tow package, there is not a 7-way connection that plugs right in with all the 7-way functions. You will need to install a 4-way flat connector like # 118416 first. This harness installs to the factory wiring located behind the driver's side tail light. I've attached a video to assist. Then if you don't want all the 7-way functions, but need the 7 way adapter, you can simply use the Hopkins Endurance Multi-Tow 4-Way Flat to 7-Way RV Trailer Adapter w/ 4-Way Vehicle...
    view full answer...

  • How to Install a Brake Controller on a 2014 Jeep Wrangler Unlimited
  • There isn't a brake controller wiring harness for a 2014 Jeep Wrangler Unlimited. A brake controller will have to be hardwired in. If your Jeep came with a factory installed 7-Way then you will just need installation kit # 5506. The brake controller white wire will ground to the negative battery terminal. The black wire will connect to the positive battery terminal via the 30 amp circuit breaker included with 5506. The blue wire will need to be routed to the back of the 7-Way and attach...
    view full answer...

  • Trailer Hitch Recommendation for 2016 Jeep Wrangler Unlimited Rubicon 75th Anniversary
  • The most popular hitch we offer that is a confirmed fit for your 2016 Jeep Wrangler Unlimited is the Curt hitch part # 9883544. This hitch has the best price by far and is made in the USA so it's a no-brainer if you ask me. This is compatible with your Rubicon bumpers as well. I attached an install video for you to check out as well. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop...
    view full answer...

  • Trailer Hitch Fit and Brake Controller for 2016 Jeep Wrangler Rubicon Hard Rock Edition
  • That's a good question and the latest information we have is that there is a trailer hitch that fits your 2016 Jeep Wrangler Rubicon Hard Rock, the Draw-Tite Trailer Hitch Receiver # 76104. As you can see by the cut out of the linked installation instructions, it may be that you have a spacer plate between the cross member and your bumper which needs to be removed so you will want to check for that and if you do have that this hitch will work great. In regards to a brake controller,...
    view full answer...

  • Trailer Hitch and Wiring that Fits a 2016 Jeep Wrangler Unlimited 75th Anniversary Edition
  • Yes, Draw-Tite trailer hitch # 76104 will fit your 2016 Jeep Wrangler Unlimited 75th Anniversary Edition. If you take a look at the instructions I have linked the Jeep in the pictures has a bumper almost identical to yours. Also the manufacturer does list the hitch as a fit for all models of the 2007 to 2016 Wranglers. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
    view full answer...

  • Parts Needed to Install 4-Way and 7-Way Connectors on a 2016 Jeep Wrangler Unlimited
  • If you don't already have electrical connectors on your 2016 Jeep Wrangler Unlimited then you will need to start off by installing a 4-Way connector like the T-One # 118416. This plugs in behind your tail lights and will give you the basic lighting functions for your trailer. One the T-One is installed you need to install the Universal Wiring Kit # ETBC7. This comes with all of the wiring and connectors you need to have a fully-functioning 7-way (and 4-Way) at the rear of your Jeep. If...
    view full answer...

  • Getting Trailer Wiring Harness 118416 to Work with a 2017 Jeep Wrangler Right-Hand Drive Model
  • For some reason the right-hand drive version of the 2017 Jeep Wrangler Unlimited doesn't have the same tail light wiring as left-hand drive models. What you will have to do is plug in wiring harness # 118416 to one side or the other. On the side it is not plugged into use a circuit tester such as # 40376 to locate the wire that carries the turn signal and brake light function. Splice a wire into that wire on the vehicle using a quick splice connector such as # SWC501746-1 and wire # 16-1-1...
    view full answer...

  • How to Install a Trailer Brake Controller on a 2014 Jeep Wrangler Unlimited
  • There isn't a port to plug in a brake controller on your 2014 Jeep Wrangler Unlimited. The controller has to be hardwired in. If your Jeep has a factory installed 7-Way trailer connector then you need installation kit # 5506. The brake controller should have come with a universal hardwire harness, # 20127. If you do not have it then you can just cut the connector off of the end of the controller. The brake controller black wire will go through the firewall and connect to the positive...
    view full answer...


Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Expert Research:
Michael L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Joshua S
Video by:
Kathleen M
Video by:
Chris R
Video by:
Zach D
Video by:
Jonathan Y
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.