T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• What is Needed to Add 7-Way to 2019 Honda Ridgeline With 4-Way
  Hi Dan, So the easiest thing to do is actually remove that 4-way on your 2019 Honda Ridgeline and replace it with the T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # 118288. This will plug into that same gray connector the 4-way did, and give your Ridgeline a working 7-way.
  view full answer...
• Brake Controller Recommendation for 2019 Honda Ridgeline
  First let's get your 2019 Honda Ridgeline setup for a 7-way and brake controller. It sounds like you might have a 7-way already installed, but if you didn't the correct kit would be the part # 118288 which is a confirmed fit for your vehicle. The brake controller I recommend is the P3 part # 90195 that you referenced. This is the best performing controller and also the most advanced so it will do the best job for you overall. It has a screen that can display full words, the ability to save...
  view full answer...
• No Power to Taillight Pin on Trailer
  If you have no power to the taillight pin with the T-Connector Vehicle Wiring Harness # 118288 then the issue is almost certainly that you have a blown fuse on your 2019 Honda Ridgeline. What you will need to do is check you owner's manual to find the fuse and replace it, which should remedy the issue. The only other thing that might be happening is a wire leading to that pin is somehow damaged, so that would be the other thing to look for. I have added links to a couple trailer wiring...
  view full answer...
• Recommended Brake Controller for a 2017 Honda Ridgeline
  The brake controller that I recommend for you to use on your 2017 Honda Ridgeline is the Tekonsha Prodigy P3 # 90195. This is one of the easiest brake controllers to install and use, plus it has received numerous positive reviews from our customers. To install it in your Ridgeline you will simply need to use the Adapter # 3070-P which will give you a plug-in option. If you need a 7-Way connector, I recommend Tekonsha part # 118288. Installation instructions and some videos have been linked...
  view full answer...
• Recommended 7-Way and Trailer Brake Controller for 2011 Honda Pilot
  Starting with the 7-Way for your 2011 Honda Pilot, I recommend the Tekonsha T-Connector Vehicle Wiring Harness # 118288. This custom harness will plug right into the factory port located behind the rear bumper of your Pilot and provide you with a 7-Way connector. This particular kit includes the fuses and relays needed to activate the tow package so the 7-Way will be fully functional. I have attached the written installation instructions that you can also check out. Then for the brake...
  view full answer...
• 7-Way Trailer Wiring Recommendation for 2017 Honda Ridgeline
  Sounds like you installed a 7-way connector at the rear of your 2017 Honda Ridgeline and are looking for the intermediate harness that the 7-way would connect to. Since that's not available the only option we have would be the part # 118288 that you referenced which comes with this. You'd end up with a backup 7-way since it's included. It also includes all the relays and fuses as well.
  view full answer...
• How Easy is It to Install Curt Echo Mobile Trailer Brake Controller
  The really great thing about the Curt Echo part # C51180 is that it only requires a functional 7-way on the vehicle and a smart phone and it's good to go. So you'd just need to pair this to your phone after plugging it into the 7-way and you'd be ready to tow. You would not need to use the brake controller port on your 2017 Honda Ridgeline at all. I attached a review video for more info on this as well. If you were in need of a 7-way for your Ridgeline the Tekonsha kit part # 118288...
  view full answer...
• Do All 2019 Honda Ridgeline Have Factory Tow Package Wiring
  The 2019 Honda Ridgeline is pre-wired to attach a 7-Way plug that powers trailer brakes but not all Honda Ridgelines have the wiring harness for a plug and play brake controller adapter. If you need a 7-way I recommend to use Tekonsha T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector part # 118288 which will plug into a port behind the rear bumper. It also comes with the relays needed to activate the tow package on the Ridgeline so power the circuit needed on the 7-way needed...
  view full answer...
  
• Recommended 4-Way Flat Wiring Harness for a 2019 Honda Ridgeline
  If you are looking for only a 4-Way Flat connector for your 2019 Honda Ridgeline then I recommend the Tekonsha T-One # 118778 because it has higher amp ratings than the Curt option and we have found the Tekonsha wiring units to be the most reliable out there. This connector gives you the basic lighting functions that you need for a smaller trailer and can be mounted using the Tow Ready # 18144 and a no-drill bracket like part # 18140. Since you have a pickup I do recommend installing...
  view full answer...
• Changing to 4-Way and 7-Way Connector on a 2017 Honda Ridgeline
  Since your 2017 Honda Ridgeline has the factory 7-way connector on it you should have a wiring harness that has the standard to package plug. It's the harness that plugs into the back of the 7-way connector and looks like the picture I attached. If this is how your 7-way connects then you can simply unplug the factory connector and replace it with part # HM40950 that has both a 4-way and a 7-way connector in one. If your factory 7-way plugs in in some other fashion let me know. Send...
  view full answer...
  
• Removing Cap of 2017 Honda Ridgeline to Install Trailer Wiring
  While we don't have a video I can hopefully explain how to remove the cap of the wiring on your 2017 Honda Ridgeline to install the trailer wiring # 118288. Remove the connector from the cross-member using a pry tool like # ALL648544. Remove the dark blue fastener from housing by sliding it rearward. Remove the protective cover taking care not to damage the locking tabs (picture with G in corner). The tabs need to be fully pushed down and released to allow the cap to come off. Insert...
  view full answer...
  
• Installation of Wiring for a Leer Camper Shell on 2018 Honda Ridgeline
  It sounds like the dealer messed with your factory wiring harness and you want to replace it with the T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # 118288. The correct way to run the wires is to connect the dome light to the 12V power wire either directly coming from your battery using a circuit breaker or splicing into your 12V wire at the 1 o'clock position at your bumper. If you want to run a specific wire, you will use # 16-1-1 sold by the foot and use circuit...
  view full answer...
• Recommended Trailer Brake Controller For 2019 Honda Ridgeline RTL AWD
  Since your 2019 KZ escape 191 bh has a GVWR of 4000lbs it should have trailer brakes installed from the factory, so you will need to have a 7-way connector and trailer brake controller on your 2019 Honda Ridgeline AWD RTL to use the brakes. If your Ridgeline does not already have a 7-way connector installed you will need to add one using T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # 118288. For a trailer brake controller I recommend the Tekonsha Prodigy P3 # 90195...
  view full answer...
• Is Powered Converter Needed for Installing Trailer Wiring on a 2019 Honda Ridgeline
  The powered converter is what will send the actual power to the trailer connector so you will need to install it on your 2019 Honda Ridgeline whether you're installing the 4-Way flat or the 7-Way connector. I recommend going with the Tekonsha kits, 4-Way Part # 118778 or 7-Way Part # 118288, simply because we have found them to be the most reliable option. I'm attaching links to the installation instructions as well as our ball mount selection and a helpful article about choosing a ball...
  view full answer...
• Troubleshooting No Power To Trailer Charge Line On a 2021 Honda Ridgeline
  If you have the factory tow package or just installed the T-Connector Vehicle Wiring Harness # 118288 on your 2021 Honda Ridgeline you will need to check the charge line fuse. According to page 564 of your owners manual I see there is a 20 amp fuse in engine compartment B fuse panel at location 11. If this fuse is damaged or missing that will explain why you do not have any power. A Test Light # PTW2993 will allow you to verify that both sides of the fuse have power. In the event the...
  view full answer...
• Available Trailer Wiring Harness Kits for 2017 Honda Ridgeline
  We offer wiring harness kits for your 2017 Honda Ridgeline in both the 4-pole flat and 7-way blade style configurations, both of which are shown on the linked page. Parts # C56365 and # 118288, fit vehicles with the factory tow package. The 4-pole wiring format delivers only basic lighting signals to a trailer, stop, turn and tail lights. The 7-way format includes these signals and adds three additional circuits: 12V power, trailer brake power and reverse lights. You can refer to the...
  view full answer...
• Locating Factory 12 Pin Connector on 2019 Honda Ridgeline to Install Tekonsha Harness
  The factory 12-pin plug where the Tekonsha Harness # 118288 will plug in on your 2019 Honda Ridgeline is located towards the center of the vehicle on the back wall of the cab. To access the plug you will open the rear driver side door and fold the bottom rear seat up into the upright position. Then remove the seat trim panel and the plug should be to the left of the green factory relays.
  view full answer...
• Identifying 7-Way Pin Function For Testing The Harness
  The attached diagram should help but for 7-way connector kits like # 118288, you can look at the functions clockwise. Purple is reverse lights at noon, Black is 12V battery power at 1:00, Green is Right turn and brake at 3:00, Blue is brake controller output at 5:00, White is ground at 7:00, Yellow Left turn and brake at 9:00, and Brown is tail and running lights at 11:00. A review video is attached for additional information and a help article as well.
  view full answer...
  
• Trailer Wiring Harness Recommendation for 2019 Honda Ridgeline
  For your 2019 Honda Ridgeline the trailer wiring harness I recommend is the Tekonsha part # 118288 if you need a 7-way or part # 118778 for if you need a 4-way. These are the best wiring harness solutions as the Tekonsha brand is the most reliable option currently available due to their higher quality converter boxes. If your trailer has a 7-way and brakes you'll need a brake controller to activate them for that our best option is the P3 # 90195. This is a proportional brake controller...
  view full answer...
• 7-Way Trailer Wiring Recommendation for 2019 Honda Ridgeline
  If you are looking for a 7-way trailer wiring connector for the rear of your 2019 Honda Ridgeline the correct part number is # 118288 which comes with everything needed to install on your vehicle. The # C56584 is a kit designed to plug inline with 7-way to provide a 5-way.
  view full answer...
• Recommended Trailer Brake Controller for 2019 Honda Ridgeline Sport
  I assume you are looking for a brake controller for a 2019 Honda Ridgeline Sport as that is all that pulls up in a google search. If that is what you are seeking I recommend the Tekonsha Prodigy P3 # 90195 which is a customer favorite because of the dependability and the ease of use with the LCD screen. For this you will use the wiring harness # 3070-P. I've attached a video of this on a 2017 model to assist. If you want a more factory brake controller appearance then I recommend the...
  view full answer...
• Recommended 4-Way or 7-Way Wiring Harness for a 2023 Honda Ridgeline
  We have a couple of options for wiring harnesses that are custom fit for the 2023 Honda Ridgeline. I have listed both options below: 4-Way - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118778 7-Way - T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector item # 118288 These custom-fit T-connectors plug into your Ridgeline's wiring harness, which is located towards the center of the back wall of the cab. The converter plugs into the gray 12-pin tow...
  view full answer...
• Fit and Compatibility of Wiring Harness on a 2011 Honda Pilot 4WD
  Which wiring harness you need for your 2011 Honda Pilot 4WD is dependent on what you plan on plugging the harness into. The Tow Ready # 118491 and the Curt # C56365 are the custom fit harnesses that will give you a 4-way end to plug into typically a small trailer or cargo carrier with lights. The Tekonsha # 118288 is the custom fit harnesses that will give you a 7-way end socket which is typically found on larger trailers equipped with brakes. I have linked a couple of images and installation...
  view full answer...
  
• 7-Way Trailer Wiring Harness that Fits 2019 Honda Ridgeline
  While the Curt part number you referenced is not the correct fit for your 2019 Honda Ridgeline we do have the Tekonsha 7-way kit part # 118288 that is a confirmed fit and would be exactly what you'd need. It comes with everything needed to install too.
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?