bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. No Converter
Tow Package Wiring Harness with 4 Pole Trailer Connector

Tow Package Wiring Harness with 4 Pole Trailer Connector

Item # 118241
lowest price pledge
Retail:$31.34
Our Price: $21.48
You Save: 31%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 0.3 lbs
Quantity: 
In Stock
118241 - Custom Fit Tekonsha Custom Fit Vehicle Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
Tow Ready Tow Package Replacement Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese 1-636-306-4830 to order Tekonsha custom fit vehicle wiring part number 118241 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for Tow Package Wiring Harness with 4 Pole Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (214)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118241

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • No Converter
  • Tekonsha

Tow Ready Tow Package Replacement Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese


Features:

  • Provides a 4-pole flat trailer connector for the vehicle
  • Quick and Easy
  • No Cutting, Splicing or Taping
  • Just Plug in the Connector and You're Ready to Tow
  • Solid One Piece Construction
  • 16 Gauge Bonded Wire w/ 4-Flat Plug
  • "Factory" Appearance
  • Connector is Equipped with a Circuit Protected Modulite Module
    • Protects itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
  • Simple Do-It-Yourself Instructions on Every Package
  • Can be used with 5-pole, 6-pole or 7-pole adapters (sold separately)


Installation: The connection point is hanging underneath the rear of the vehicle and can be found on either the driver or passenger side. Connector will have a protective cap that will need to be removed. The 4-pole trailer connector will be stowed under the vehicle close to the trailer hitch. A mounting bracket is recommended.


Tech Tip: It is always a good idea to apply a small amount of grease to all electrical connections to help prevent corrosion.


Warning: Overloading circuit can cause fires. Do not exceed lower of towing manufacturer rating or:

  • Max. stop/turn light: (7.5 amps)
  • Max. tail lights: (7.5 amps)

Read vehicle's owners manual and instruction sheet for additional information.


118241

Ford Explorers with the tow package will have a plug hanging underneath the vehicle. The plug is usually located in the rear of the vehicle on the driver's side. However, the plug can also be found on the passenger's side and sometimes even on both sides. The small grey plug is usually covered with a red nipple (as pictured), but the colors and styles of caps do vary.



118241 Tow Package Wiring Harness with 4 Pole Trailer Connector

Installation Details 118241 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Tow Package Wiring Harness with 4 Pole Trailer Connector - 118241

Average Customer Rating:  4.8 out of 5 stars   (214 Customer Reviews)

Tow Ready Tow Package Replacement Vehicle Wiring Harness by Draw-Tite, Hidden Hitch and Reese

by:
1998 Ford Explorer

Like the reciever the wiring harness arrived 2 days early and it was a plug and play item, perfect for my 1998 Explorer..

It took just a few minutes to remove the dust cap from the plug which was located behind the drivers side rear brake light under the Explorer and then just plug the harness in and route it in the best location you can find...




by:
2000 Ford Explorer

Becuase if this website it was easy to find what was needed for my truck to tow. Very detailed installs online. The best part was everything was bolt in and no drilling required along with plug and play wiring harness. Definitely will be another custom tee in the future!




by:

High quality products, does everything as advertised. Super easy to install and worked great. A little slow getting my order but with the pandemic that's to be expected


Comments
Harness still operating as it should, not a problem with it at all. Works as good as any factory wiring.
Paul - 05/01/2022


by:

I changed all the lights in my 98 Ford Ranger to LED and added a Tailgate light bar. The Hopkins inline adapter that I already had showed a cross talk problem with the LEDs but not bulbs. If you had the tail lights on and turned on a turn signal, the opposite side flashed dimly making it look like hazard lights were on. This adapter was a perfect straight wire fix that plugged directly into the existing trailer light pigtail to provide a 4 wire connection and it was priced cheaper than I could do it myself. Easy to install and tucked away neatly. Notice there is no dim right turn signal now when the left one is on. Thank you etrailer for having what I needed and the great customer service!




by:
2000 Ford Explorer

I spoke to my mechanic (who failed to locate the round plug that your video shows) who said I might be paying hundreds of dollars and hours possibly, to splice wires and get it right for trailer lights. Then I watched your video, total time five minutes, went out to my 2000 Ford Explorer Sport, 3 minutes, saw the plug, ordered the part $12---then installed--3 minutes. Wow. Thank you. No splicing, no mess, no fuss. Just plug it in. I tested it with the boat trailer and horse trailer-everything works perfectly. Can't beat it.


Comments
Everything is still working perfectly. You have no idea what complicated baloney my mechanic, as well as store clerks at several Automotive stores, told me about what would have to happen to connect my horse trailer. And the money I needed to spend, in labor and in product. You solved that with very little money needed and five minutes to hook up. So, yes I am still very happy.
Fred - 12/11/2018


by:

Fit perfectly




by:

It was the same part. And fit and work. Thanks so much. Michael




by:

Everything was perfect and after a year still is. We have had no problems with this item at all. Thank you




by:
1998 Mazda B Series Pickup

was the product i needed and came to me fast. thank you etrailer.com i will be glad to do more buisness with you.


Comments
great
Tobias D - 07/30/2021


by:
1998 Ford Explorer

Perfect fit for my 1998 Ford Explorer Eddie Bauer v8 AWD. Factory connector is easily accessed by removing the driver's side taillight housing. Connect fit was snug and secure.




by:
1997 Ford Explorer

I am truly amazed with etrailer.com. Not only did I find the wiring harness for my '97 Ford Explorer but it arrived as scheduled and was easily installed within minutes. The support team was also fantastic in following-up on my order and offering technical support if required. I definitely recommend this site and the entire team and plan on starting my search with etrailer.com for future needs.


Comments
My etrailer product was easy to install and has worked flawlessly for one year. When I need trailering products I definitely will go to etrailer first!
J R - 11/25/2018


by:

Perfect and available for my older vehicle when nobody else could locate it. Factory fit




by:
1999 Mazda B Series Pickup

Wiring Harness was delivered on schedule. Was a "snap" to connect to existing wiring coupler--plenty long--and works perfectly. 100% content with this purchase, price, and ability now to light and signal utility trailers.


Comments
The product is fine no problems. Satisfied....
Brad B - 02/16/2018


by:
2001 Ford Explorer

Received the wrong wiring harness from another site so I decided to try etrailer. They had the correct harness and I received it quickly. Site is easy to use. Overall a very good experience.


Comments
No problems or issues to report...
George D - 05/26/2016


by:

SPOKE WITH RICK IN CUSTOMER SERVICE,HE ANSWERED MY QUESTIONS.TOOK THE ORDER AND SHIPPED IT OUT FAST.THE WIRING HARNESS WORKED JUST FINE.GREAT PRODUCT AND GREAT SERVICE TOO.


Comments
ONE YEAR LATTER AND IS WORKING WELL!THANKS AGAIN
PETER G - 09/28/2015


by:

I wish I could tell you it works great but I can't :( I wasted my hard earned money as ALWAYS, something is wrong with the factory wiring in my truck so it don't get power to the plug. more stuff for the shelves in garage that I have sadly wasted money on by NO purpose of mine..


Comments
Thank you for your review. Although I am not sure which year make and model you have exactly the first thing that comes to mind is a blown fuse. Most trucks with factory wiring have corresponding fuses for 12V power. I recommend to check your owners manual for the location of the fuse and see if it needs to be replaced or added.
-- Etrailer Expert Heather A - 06/30/2020
Thank you for your review. Although I am not sure which year make and model you have exactly the first thing that comes to mind is a blown fuse. Most trucks with factory wiring have corresponding fuses. I recommend to check your owners manual for the location of the fuses and see if any need to be replaced or added.
-- Etrailer Expert Heather A - 06/30/2020


by:
2000 Mercury Mountaineer

Harness came quickly and appears to be OEM harness as described. Original harness connection was behind the left tail lite. Capsule was removed (two screws at top of tail-lite). Connection was done and cable routed and positioned under bumper in less than 5 minutes. I presume the old harness had some corrosion as this did the trick. I did purchase a flexible cable protector to put around the harness wiring to prevent damage. It took me longer to write this review than it did to fix my problem.


Comments
Using some electrical contact grease, like part 11755, will help keep moisture out and drastically slow corrosion.
-- Etrailer Expert Patrick B - 12/12/2013


by:

easiest trailer wiring i've ever done. pulled off a dust plug, plugged in adapter, and down the road i went..


Comments
works great. have no problem with it. plug in and take off
bradley g - 03/04/2017


by:

Great service my package was received in tact and it’s just what I ordered in a timely manner.




by:
2001 Ford Explorer

The trailer light harness worked as advertised and installation was a breeze. The harness was very reasonably priced and the item arrived as promised. The one thing I truly liked about what 'etrailer.com' did is that they had a video on how to install the harness. For me, it helped out tremendously to watch on how to install it and what to look out for. Credit to this company for providing this type of assistance. I will definitely buy from them again.




by:
1999 Ford Explorer

Wiring adapter was simple to install, plug and play on my 1999 Ford explorer. Hooked right to the factory wiring harness with a click and we were finished. Used the trailer twice since and no issues.




by:
1999 Ford Explorer

got a reciever hitch for a 99 ford explorer and wiring adapter. everything needed except spanners/ wrenches was there . very clear simple instructions. fitted it this morning took 30 mins 6.30 to 7.00 before going to work . everything fitted and holes in frame were where the instructions said they would be. i have fitted many hitches and this was by far the easiest. wiring adapter plugged straight in. Full marks Etrailer I will be back for more stuff.
Roger O AKA (Greywollfe)




by:
2000 Ford Explorer

It appears in spite of many sites selling this exact part, as if it fits a 2000 ford explorer xlt 4wd, it in fact did not. I noted immediately the two "bayonet" alignment pins were in the wrong place, relative to the ford under-vehicle tow port...and thinking it might yet fit I cut off both bayonets. I believe there is but one bayonet slot, on the ford plug port. Neither bayonets on the part I bought aligned with that. When the two not-aligned bayonetsw were removed form the purchased adapter, I was thus able to plug into the ford-supplied terminal --but, sadly, it did not work. I called to let your company know and indicated I desired no refund as I had modified the part, and if possible was there a correct fitment with another part number? The gentleman on the company end did his best and concluded other related parts would not fit. In the end I have gone to a universal kit from my local walmart. Oh well. The price shipped was very reasonable and I took a chance that did not pan out. Please (this said to the dealer of the no-fit part); go and check for yourself on a 2000 ford xlt, 4wd 4-door with a 4l cologne engine. It shall not fit. Life's all about choices and chances. Sometimes you win, sometimes no.




by:
Ford Explorer

Plug and play. Ford made hooking up trailer lights for the Explorer easy. If you have this harness kit, just unhook the left rear taillight, pull it out, plug this into the connector that's on your truck's wiring, and you are done. Beginning to end, it takes about three minutes to wire your truck for trailer lights with this.




by:
1999 Ford Explorer

The product was exactly as they described. I simply plugged it in my vehicle's built in wiring harness. Very easy to do. The only thing it does not have is a mounting bracket for attaching to the bumper.



25
214
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring



  • Tow Package Fuse Locations for a 1998 Ford Expedition
    I pulled up a picture of a fuse box of a 1998 Ford Expedition and it looks like position 1 is the trailer tow running lamp relay and back up light relay. Position 16 is trailer battery charge circuit. Position 28 is brake controller relay. Aside from that you would want to check all towing related fuses using the diagram on the fuse box lid.
    view full answer...
  • How Does the Tow Ready Wiring Harness part # 118241 Install on a Ford Explorer
    To install the trailer wiring harness part # 118241 on your 1995 Ford Explorer you would need to Locate the vehicle's factory tow harness connector behind the right side of the bumper. This harness will have a connector that will mate to the end of the tow plug. I attached an install video for you to check out as well.
    view full answer...
  • Troubleshooting Trailer Blinkers that Flash Together and No Brake Lights
    If I am understanding you correctly it sounds like you had a trailer light assembly break and after that the brake lights stopped functioning and the blinkers now both flash at the same time. Most likely what happened is that when the assembly broke it tore some wiring and now you have shorts between some circuits. If you check the wiring of the assemblies and clean up any shorts this should fix the problem. I attached a help article on troubleshooting 4-way installs as well.
    view full answer...
  • Troubleshooting Taillight and Brake Light Circuits Not Active on Trailer Wiring
    Based on what you described it sounds like your trailer wiring has a weak ground and when you try to use the circuits that draw the most amperage the lights stop working. This is pretty common. What you can do is try improving the way the lights ground or run a jumper wire from the lights back to the main ground circuit of the trailer wiring and then the circuits should start working. I attached a help article on troubleshooting trailer wiring with more info for you to check out as well.
    view full answer...
  • How to Remove Dummy Wiring Harness Cap from 1998 Ford Eddie Bauer Explorer
    Thank you for the photo of your 1998 Eddie Bauer Explorer's trailer wiring harness cap. Between the age of the plastic material and the exposure to road grime (that might be trapped in the gaps, making cap removal as difficult as possible) I am not too surprised you're finding it tough to get the cap off. Add the fact that there appears to be no way to get a hand around it AND at the same time press the cap release (red arrow) and I can feel your pain. Here is my thinking. There probably...
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Wiring of 1994 Ford Explorer Not Functioning
    Due to age of your Ford Explorer I was not able to pull up an online copy of your owners manual to find the fuse/relay locations for the trailer wiring. If you check yours and find the fuse box section it would be listed there. Also it's very possible your trailer wiring just has some corrosion on the pins which is causing the circuit to not be active. You can clean them with some sandpaper and that most likely will take care of the problem. I attached a help article on trailer wiring...
    view full answer...
  • Not Getting Running Lights to the Trailer Connector on a 2001 Explorer Sport
    Though we will not have factory wiring diagrams, I am pretty sure I know what is going on and this should be a quick and easy fix. In the passenger compartment fuse box of your 2001 Ford Explorer, there should be a 15A in position 30. This port will handle the park lamp / trailer tow relay and should be all you need to get everything up and running properly. However, in the off chance this does not get you power to the running lamps, let me know and we can try a few other things.
    view full answer...
  • Where is the Factory Connection Point to Install a Trailer Wiring Harness on a 1995 Ford Explorer
    If your 1995 Ford Explorer came with the factory tow package then the connector on the vehicle to plug the wiring harness into is located up behind the rear bumper on the passenger side or drivers side. I have linked a video showing an installation of harness # 118241 on a 1996 Explorer and the installation will be very similar on your 1995 model. If your Explorer did not come with the factory tow package then you will need a different harness # 118345. It plugs in line with the vehicle...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 1997 Ford Explorer
    If you can find the matching connector for the # 118241 on your 1997 Ford Explorer it would work, or for wiring harness that I can guarantee will work regardless of if you have the connector you would want the part # 118345. This will fit either way as it bypasses the connector you are looking for. I attached an install video for the # 118241 for you to check out as well.
    view full answer...
  • Installing 4-Way Wiring Harness On 1995 Ford Explorer
    The wiring harness for your 1995 Ford Explorer should be on the passenger side of the vehicle behind the bumper. This harness should have a cap on it you can remove and then plug the harness designed for your vehicle, part # 118241 right into it. The harness you found may not be the correct one. Per the instructions for the # 118241, you will find the connector on the passenger side behind the bumper for an Explorer. When working with electrical connectors I recommend using dielectric...
    view full answer...
  • Installation of a Trailer Wiring Harness on a 1997 Ford Explorer Without Factory Tow Package
    First, you need to find out If your Ford Explorer is equipped with a tow-package port (90 percent are). If so use, item # 118241, which is much simpler to hook up. The plug is usually located in the rear of the vehicle on the driver side. However, the plug can also be found on the passenger side and sometimes even on both sides. The small grey plug is usually covered with a red nipple, but the colors and styles of caps do vary. If your Explorer is not equipped with the factory tow package...
    view full answer...
  • Wiring Harness Connection Location On a 1999 Ford Explorer Limited with Tow Package
    I see exactly what you are talking about. I checked the stock we have on hand and all of the # 118241 wiring harnesses have the pins in the 3 O-clock and 10 O-clock positions with the locking tab up. I then spoke with our installation tech and he feels that the directions for the 1999 Explorer are wrong. He says that he remembers having to use the connector that is on the drivers side and that the picture on our web page was taken following the manufacturers directions and never got corrected....
    view full answer...
  • Trailer Wiring Harness for 1996 Ford Explorer
    Does your Explorer have the Factory tow package? If so, there is a connector under and behind the rear bumper usually on the passenger side of the vehicle that the wiring harness, part # 118241 would plug into. If your Explorer does not have the tow package, wiring a 4-way connector directly into the tail light wiring will not work. Your Explorer carries the signal for the brake lamp and the turn signals on a separate circuit, the trailer has both these functions combined on one circuit....
    view full answer...
  • Trailer Wiring Harnesses for a 1997 Ford Explorer
    Your 1997 Ford Explorer has a 3 wire system and requires a powered converter. The converter from the auto parts store has taillight, turn, and brake functions and a 5th wire for ground. A converter for your vehicle requires a direct connection to the vehicle battery to protect your vehicles sensitive wiring. Bypassing the modulite is not recommended for this reason. If the modulite is damaged, there are no internal serviceable parts so a replacement is the best option. If your Explorer...
    view full answer...
  • Where to Connect the Tow Package Wiring Harness 118241 on a 2001 Ford Explorer XLT 4 Door
    When installing the Tow Package Wiring Harness, item # 118241, on a 2001 Ford Explorer XLT 4 door you will need to use the tow harness connector on the right side of the vehicle. The connector on the other side, while it looks very similar, will not accept the connector for the Tow Package harness. If the connector on your vehicle does not work or will not accept the connector on the Tow Package Wiring Harness, item # 118241, you will need the T-One Wiring Harness, item # 118345, to add...
    view full answer...
  • Location of Trailer Wiring Harness Plug on a 1998 Ford Explorer With Factory Tow Package
    It sounds as if the connection you found is one that is located on the opposite side of the vehicle. If your 1998 model Explorer has the factory tow package installed the correct connector for the trailer wiring harness, # 118421, is sometimes on the drivers side or the passengers side. There is a very similar connector that the harness will not plug into on the opposite side in most every case. Go to the other side and locate the connector there and I am confident your wiring harness...
    view full answer...
  • No Power at Connector of the Factory Tow Wiring Harness on a 1996 Ford Explorer
    On your 1996 Ford Explorer you might try checking the fuse panel that is located on the left hand side of the instrument panel facing the drivers side door. Remove the panel by pulling the cover outward. Check the 7.5 amp fuse at the number 3 slot which is for left stop/turn trailer tow connector and check the 7.5 amp fuse at the number 7 slot which is for right stop/turn trailer tow connector. Also, find the power distribution box located under the under the hood on the drivers side,...
    view full answer...
  • Trailer Wiring on a 1997 Ford Explorer Stopped Working
    If the Tow Ready Custom Fit Vehicle Wiring, # 118345, was working on your 1997 Ford Explorer but then suddenly stopped working, the first thing I would check is the fuse that came with the converter. The power wire should be connected to the vehicle battery via the fuse and fuse holder. If you find that fuse is blown you will need to replace it. However, if there was a short on the trailer wiring, trailer side, or corrosion in the connectors on either side, it could blow the fuse again. Loss...
    view full answer...
  • How to Determine if a 1996 Ford Explorer XLT Has a Factory Tow Package
    Ford Explorers with the tow package will have a plug hanging underneath the vehicle. The plug is usually located in the rear of the Ford Explorer on the drivers side. However, the plug can also be found on the passengers side and sometimes even on both sides. The small gray connector is usually covered with a red plug (see attached picture), but the colors and styles of caps do vary. About 90 per cent of the Ford Explorers came with the tow package. I am including a link to a video of...
    view full answer...
    Image 1 for
  • Trailer Wiring Harness Recommendation for a 1997 Ford Explorer
    Most likely yes, but the only way to know for certain would be for you to contact a Ford dealership with the VIN of your 1997 Ford Explorer and they will be able to tell you for sure. If you have the tow package all you would need for trailer wiring would be the part # 118241. The wiring harness part # 118345 that you referenced will work either way. Whether or not you have the tow package this harness will work for you.
    view full answer...
  • Installing Wiring Harness on 1999 Ford Explorer with Factory Tow Harness
    If your 1999 Ford Explorer came equipped with a factory wiring harness, then the part you referenced, Tow Ready # 118241 is a correct fit. The round plug on this plug-and-play 4-pole harness connects to a matching round plug on the vehicle. While there could be multiple plugs on the vehicle only one will carry the lighting signals for a trailer. You can use a tester like # 40376 to probe the wires on the vehicle plugs while the turn signals and lights are engaged. Once you confirm the...
    view full answer...
    Image 1 for
  • Trailer Wiring Harness Recommendation for 1996 Ford Explorer without Tow Package
    If you can't find the needed connector to install the # 118241 that would indicate that you don't have the tow package and instead would want the harness part # 118345 which is a fit for your 1996 Ford Explorer without the tow package.
    view full answer...
  • Where is Factory Plug Located to Install Trailer Wiring Harness on a 1997 Ford Explorer
    Usually, a Ford dealer can tell you if your 1997 Ford Explorer is equipped with the factory tow package by running the VIN in their system. There are also VIN decoders you can find online that may help. The factory connector, if present, to plug in harness # 118241 is located on the passenger's side of your Explorer behind the bumper. I have linked a video showing installation on a Ranger. On the Ranger the connector is on the driver's side but it will show you what you are looking for...
    view full answer...
  • Causes for Difficulty Removing Trailer Wiring Connector on 1998 Ford Explorer
    The various wiring kits offered for your 1998 Ford Explorer Eddie Bauer Edition are shown on the linked page. Whether your wiring is a factory 4-pole like # 118241 or an aftermarket kit like # 118345 there will usually be a locking clip safety feature of some sort to prevent the harness from becoming disconnected. These and all other wiring kits for the vehicle are shown on the linked page. Over time plastic can become pretty stiff (and brittle) so if the existing wiring has been in service...
    view full answer...


< Previous



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew L
Video Edited:
Andrew L
Employee Joshua S
Video by:
Joshua S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.