To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your Kia Sorento with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's factory tow package wiring harness, which is located along the frame rail at the rear of your vehicle. The exact location of the port will vary depending on the make, model, and year of your vehicle. Once you've plugged in the connectors, insert the included fuse into the in-line fuse holder.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (768 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required. Powered ModuLite reduces strain on wiring system.Great service. easy to install.
Quick install perfect!
Product fit well and instructions were complete.
everything fit perfectly
The product arrived on time, installed properly, and worked properly. Thanks
Truly plug 'n play. I followed the directions and everything worked perfectly.
I recieved the wiring harness yesterday. It was raining so I have not had a chance to install it yet, but it looks simple enough.
Installed in just a few minutes. instructions actually accurate, but somewhat difficult to understand (the pics don't really help a ton)
Overall great!
Great product easy install.
This was easy to install except for finding a spot to mount the box. It would have helped if the instructions had better pictures. However, I finally found a spot to install the box and the rest was a snap.
Fast shipping. The wiring harness was an prefect fit on my vehicle.The instructions that came with it were also spot on. Would highly recommend this etrailer product. Thanks
If you have to add a wiring harness to tow a trailer, I've never seen anything as easy as this. No splicing, cutting, or taping.
I have a Bruno lift for my scooder chair. I required a hot wire and ground wire to operate. The product had only four prongs. I had to do some extra wiring. also the fuse hold is had to get to after installation, because it is above the exhaust pipe in the bumper rail.
This is a plug-n-play installation. Only problem I had was in squeezing the control box into the alotted space. I removed an extra fastener and that gave the fascia enough play that the box slid right in. I was done in under 15 minutes.
Very easy to install, looks like higher quality then prior Curt harness I had before that failed. I recommend getting this unit over the factory harness which will run you double the price.
Very easy install. If you are installing the hitch, do this first. I had a little difficulty in finding the wiring hold from the diagram. Keep searching, you'll find it. It's not visible but if you dig inside the bumper with your hand, you'll find it.
Excellent product, very easy to install. The conduit (hole) to run the harness through is parallel with the tail pipe not perpendicular. After figuring that out, the installation went fast.
Very easy to install, plugged right into the pre-wired plugs. Use a small rope to fish module through body. The smaller plug could use about 1 inch more of wire at the end to make plugging easier.
Perfect fit. Installation instructions are spot-on. I would highly recommend installing the wiring kit BEFORE you install the reciever hitch. You will appreciate the extra hand room. Still,not a bad install either way. Took about 20min start to finish.
it was so easy, I have a lx v6 and yes it did have the factory prep package even though everything said it didn't. Two plugs and five minutes is all it took. Make sure you check your right drivers side to see if you have the two trailer plugs.
Easy install and works well with 2011 Sorento SX. I was very skeptical as to what I should buy after reading forums, reviews on other sites, etc. The shipping was super fast and everything was exactly as described. And, NO, you do not have to run a separate power wire with LED tailights. Just plugged them in to the factory plugs on the frame rail. Took me about :30 mins start to finish.
Best shopping experience I have ever had .Every item was exactly as described in ad , super prices and extra quick shipping .The directions that came with the items were very clear and easy to understand . Hitch and wiring kit were both installed in less than an hour . Thank you for everything
Outstanding!!! My Sorento had the trailer plugs near the roadside rear tire and a fuse in the trailer slot of the engine compartment fuse box. I didn't test the wiring... But ordered the harness anyway. Installation was a breeze. Instructions were accurate and easy to follow. Everything lit up nicely. I purchased the short bracket and 4 flat connector mount. When I was all done it looked like it could have been a factory install. Very clean look. I love it! Thank you etrailer!!!!!
Great find on my part, I had Uhaul install by trailer hitch an do the wiring WHAT A MISTAKE !! they never got it to work. I undid it all and ordered the wiring from you guys and did it myself in 1/2 hr and it better than kia would of done it. Its all custom made for my SUV.
The instructions were great 5 easy steps and done.
Now im having fun on my new waverunners.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.