To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Jeep Wrangler with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the access cover and the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Easy to install, hot wire attached to lug on side of fuse block w/fuse.
Use 4' flex rod for electrical to fish wire to fuse block under vehicle
Great product. Easy to install. I ran the wire through the frame to the battery. I used a feeding fish line tool and you cant see the wire from the rear to the front.
Another successful order and install from etrailer.com! Always fast shipping and excellent installation guide videos! Installed on 2021 JL Wrangler EcoDiesel.
Easy to install, no cutting of factory wires, perfect. Be aware that the 2018 JK and JL have different taillight plugs, and you need to get the correct harness. This one only works on the JL.
I made this purchase after watching the installation guides on YouTube. I'm not the most experienced "car guy", but everything went in super easy. I'm really satisfied.
EVERYTHING CAME IN GOOD CONDITION AND WORKING ORDER...
YOUR VIDEO ON HOW TO INSTALL THIS WAS GREAT !
It was hooked up by mechanic without a problem.
we never got to use it, because we decided not to tow a vehicle behind our RV,
I’ll be installing this harness this weekend on my wife’s JL but I have inspected the harness and the quality is exactly what you would expect from Tekonsha. The instruction sheet is clear, detailed, and thorough.
The kit includes everything needed for the install. The butt splices supplied in the kit ( for the power wire, everything else is plug and play ) are of good quality and have heat shrink insulation applied for a weather tight seal.
I will pick up some split loom wrap to cover the harness / wiring for added protection and a discreet, factory installed and finished look.
Overall, this is a very good kit, and is definitely a good work around for a Jeep that did not have the tow package as a dealer option.
Super easy install with a little know how. Hardest part was running the 12 volt source.
I prefer to use this Tekonsha module for the vehicle that don`t have the factory tow harness. The module was tucked away in the body cavity behind the drivers side tail lamp assy. All wiring was covered in HD split loom. All wiring was concealed as much as possible by running them through the cross rail and frame rail up to the battery positive terminal. I did lengthen the green wire on the passenger side to accomplish this. All connections were done with heat shrink connectors. Installation did take longer than usual based on the wire routing I chose. Overall I am totally satisfied with this product.
Great harness
Awesome product. Works as advertised, I would purchase again. Easy install and great instructions.
Very nice, personable employee’s that knew the product’s very well and helped me get what I needed. The item’s came quicker than I expected.
Good quality, easy to install, takes about an hour
I've purchased a handful of trailer hitches/wiring harnesses over the past 10 years and they have always been awesome!! Quality products and fast shipping every time!! Just recieved a new class 111 hitch & wiring harness for my 2018 Wrangler JL and installed the hitch in less then 10 minutes and the wiring was approximately an hour after watching the video provided on their website. Never been disappointed!!
On Sat 3/9/24 I called etrailer and attempted to order Roadmaster Direct-Connect Base plate.., phone lines down so you couldnt place my order. The price then was 397.71. You called me back following Sunday and was able to place my order. The price on same item one day after my first attempt was now $[XX] which I paid not reallizing the price had increased by $[XX] dollars . I checked your site and the price had indeed increased to $[XX]. I checked the site again on Tuesday 3/12/24 and the price had decreased again to $[XX]. I called you to have my account credited the $[XX] as I had not even received the item yet. You told me that couldnt be done. You would however re order and I could return the one that hadnt even arrived yet,, but that I would have to pay shipping of $[XX]. How ridiculous does this sound? You told me that if I paid for a gallon of gas one day and the price dropped the next day i couldnt expect the gas station to take it back so etrailer wouldnt credit me the $[XX] either. I can’t believe this happened even as I write this review it sounds so stupid. I feel I was over charged $[XX] and think I’m still due a credit. I have been a customer for years but no more.
Perfect fit and easy installation too. I would buy again.
The wiring was just what we needed to wire our Jeep. good price as well.
very easy install thanks to the outstanding video. Adding this and an $80 -2 inch receiver was way cheaper than buying from the dealer. Since I had the taillights off, i threw in a fuel filler door at the same time.
Called in to ask which part would fit my Jeep. Someone picked up right away and answered my question perfectly. So nice to have service like that and have them direct me to the right part. The part itself works as it should.
Fast shipping great products
all works great
Prompt with replies to my questions. Answered my questions. Gave me options based upon what she perceived my need was. One of the best ONLINE LIVE CHAT EXPERIENCES that I have ever had.
Easy install just watch video on trailer site
works well, instructions are complete, everything plugged into existing wiring.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike
3/26/2024
Working great