bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Ford
  3. Van
  4. 1999
  5. Tekonsha
FITS 1999 Ford Van
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Tekonsha

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Part Number: 118344
In Stock
$35.87
Custom Fit Vehicle Wiring
Confirmed to Fit
1999 Ford Van

without factory tow package

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Tekonsha custom fit vehicle wiring for your 1999 Ford Van are available from etrailer.com. Installation instructions and reviews for your Ford custom fit vehicle wiring. Expert service, and great custom fit vehicle wiring prices. etrailer.com carries a complete line of Tekonsha products. Order your T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part number 118344 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (156)
  • Q & A (0)
  • Photos

1999 Ford Van - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

  • 4 Flat
  • Trailer Hitch Wiring
  • No Tow Package
  • Vehicle End Connector
  • Tekonsha
  • Plug-In
  • No Converter
  • Plug and Lead
  • Hidden

Quickly and easily install a 4-way trailer connector on your Ford Van with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove either the tail light assemblies or interior trim panels to access this harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed either in the jack storage compartment of your cargo area or beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure if you are mounting it near the hitch.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118344 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118344 Installation instructions

California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.9

156 reviews
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

by:

Fast shipping and good product.



by:

Installed easy works good no problem



by:

Works great easy to install



by:
2000 Ford Ranger

Simple Installation !



by:

very quick delivery&very good products



by:

Nice product,easy install also Great Price!!!!!!!!!



by:

Simple plug and play operation, fast shipping. A+



by:
2000 FordVan

Good price and a true plug in product. Instruction very clear. Installed on 2000 Ford Van.



by:
Ford F-150

Purchased a wiring harness for my F150. Installed perfectly. Fast courteous service.



by:
2002 Ford Ranger

excellant product a snap to install. 15 minutes after I received it I had it installed and ready to go.



by:
2000 FordVan

OK, had to do some modifications to the install plan, quess this was because this van does not have a rear door molding strip, but again, well worth the cost for the harness, and was easy to install.



by:
2001 Ford Explorer

this kit came extremely fast. I ordered on the weekend and had it in my hand by mid-week. although my vehicle was not named in the instructions specifically, it was still not hard to install. It took longer to route the wires under the plastic trim than anything else. My Ford is 10 years old so sometimes things don't always go right. but this kit worked perfectly. Took about 20 minutes. I highly recommend Etrailer.



by:
2003 Ford Ranger

Purchased a trailer wiring harness for my 03 Ranger at about 5 in the evening, received an email at 9 saying that it had shipped. Received my product about 2 days after the purchase. Great shipping time, and awesome customer service. I will definitely be using etrailer again!



by:

Everything I ordered came in one large box as requested and fit like a glove the instructions were not for my car though but the hitch was pretty easy to install with no instructions



by:

Can't be any easier, Installed in less than 20 minutes. Website was easy to navigate. Onlne 'how to' video great! I will "Bookmark" etrailer as the. Go to site. Thanks guy. Job well done. Mark V



by:
2002 Ford Ranger

The hitch was better than I could have imagined. It was easy to install, the installation parts were all there and the wiring was easy. I installed it in less than one hour and that included one beer during the installation



by:
2001 Ford Focus

The wiring harness was a cinch to install, it went in exactly as the instrutions said. I am very happy that I bought the pre-wired harness, there was no guess work and it took me about 40 minutes to install.



by:

Pleasently pleased!I bought this product for future (1 month) installation in an used van that I purchased. I received the product in a fantastically short period of time. I am very impressed with the quality of the workmanship and materials. The .pdf instruction sheet is a definite plus.



by:
2001 Ford Focus

The simplicity to this application in comparison to the old days of wiring a trailer is just incredible! Plug in and go, who'd have thought! Awesome product, speedy shipping and easy installation! Thank you.



by:
2000 Mercedes E-250

Product was easy to find on the website, good price, fast delivery and snapped right in. Actually I was just here to find a couple of receiver hitches that will fit Ford E250 vans and this wiring harness was recommended on the same page. Much better than my last hack-job trying to wire in trailer lights myself.

I am pleased.



by:
1999 Ford F-150

I ordered a T-One Wiring Harness with 4 Pole Trailer Connector for a 1999 Ford F-150 late on a Friday. I received confirmation of my order and notice of shipment the same night. The wiring harness was received Monday and installed the same day. Two day turnaround on my order was fantastic. The instructions made installation easy. eTrailer.com knows what good customer service is all about. I will certainly recommend them in the future.



by:
1997 Ford Aerostar

As usual with Etrailer I got exactly what I needed at a great price. Directions were the only bad part of this wiring harness as they werent very well written. Thankfully it was a pretty straightforward process and I had it installed within an hour



by:
1998 FordVan

Product arrived very quickly and was very easy to install. I was absolutely dreading wiring the trailer little on this van and this harness made the job very simple!

Rusty profile picture

Rusty

7/12/2022

Been a year and the lights are still working like a charm! I highly recommend this product!



by:

I had put off wiring my van for a harness to go with my trailer because just the idea of running wires and tapping in to the right places, testing it all and sealing it back up was full of concern if I would get it right, how much time it would take, ... I was thinking just how frustrated I might become and so I put it off over and over again.

Then I found your site and your information. I looked up my vehicle and the part I needed. I called your number and spoke with a very helpful customer service representative. She looked up the instructions and even read part of it to me. She said the harness has two leads that just go between your tail lights and the wiring from your vehicle. They just plug right in.

I ordered the part with 2 day shipping and it came right on time. Installation was a snap. I was probably done in 15 to 20 minutes in all and the trailer lights work perfectly. The job I needed to do the next day was a breeze because I now had access to the trailer with confidence.

I even went to the store I bought my trailer from and told them about you all so they could tell other people.

Thanks for being so helpful and providing such a great product!

Paul



by:
2002 Ford Ranger

I love it. Went all over town looking for help with the trailer light hook-up truck side for a 2002 Ford Ranger. I was told that the truck was factory pre-wired and there was nothing that could be done but follow the wires to find the problem and then fix the problem. Cost about $75.00. Called etrailer and they told me how to do the repair without the hassle. Ordered the part, fixed it in about an hour. Thanks etrailer. You saved me about $50.00. The harness was easy to use, just open up the lights and snap in the plugs.


25
156
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • 2001 Ford F-150 Trailer Hitch Needed with a 700 lbs Tongue Weight and Fits with Spare Tire
    The Draw-Tite Trailer Hitch Receiver # 37130 is a Class IV trailer hitch with a 2" receiver opening that is confirmed to fit your 2001 Ford F-150 and will allow you to keep your full spare in it's current location. This has a 7,000 lbs Gross Towing Weight (GTW) rating and a 700 lbs Tongue Weight (TW) rating. When used in conjunction with a Weight Distribution (WD) system those ratings are bumped up to 12,000 lbs GTW and 1,200 lbs TW. I have attached the installation details for you to...
    view full answer...
  • 4-Pole Trailer Wiring Harness for 1995 FORD E-350 7.3L Turbo Diesel Cutaway Van
    The 4-pole trailer wiring harness we offer for a 1995 Ford Van is part # 118344, however this particular wiring harness is designed to plug inline at the connection between the OEM tail light assembly and the manufacturers wiring harness. Unless your cutaway van chassis uses the OEM Ford van taillights, which is doubtful, this harness will not work for you. Assuming that your cutaway uses a combined lighting system that carries the turn signals and brake light signal on a singe circuit...
    view full answer...
  • Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 1995 Ford E-250
    For your 1995 Ford E250 Van, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" # 41906. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13322 will not fit your vehicle. If you will be towing with this hitch receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344. This harness will install to your factory wiring behind each of your tail lights. You will need to remove either the tail light assemblies...
    view full answer...
  • Does A Brake Controller Wire Harness Need An Inline Fuse On The Brake Output Wire To The 7-Way
    Hey Rick, The 7-Way connector # ETBC7 would need an inline fuse on the power wire running to the battery and the brake controller # 90885 would also have an inline fuse on it's power wire to the battery. The # ETBC7 comes with a 20a, 30a, and 40a circuit breaker for this purpose. If you're starting from scratch on your 2000 Ford Van then you'll want to first install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344 you were looking at. From there you can start...
    view full answer...
  • Is License Plate Relocation Kit Needed if Cargo Carrier on 2002 Ford Explorer Blocks License Plate
    It would be a good idea to get a license plate mounting bracket and attach it to the cargo carrier, especially if it is required by law in your area. A duplicate plate should not be required since removing the plate from the back of your 2002 Ford Explorer should just involve a couple of screws. For a bracket we have several options but I would go with # PM436B. This is a bracket and light. The light will need to wire into the running light circuit from a trailer connector. If your Explorer...
    view full answer...
  • How To Install a 7-Way Trailer Connector On a 2001 Ford E-350
    I have exactly what you need to install a 7-way trailer wiring harness on a 2001 Ford E-350. That said, they don't make a direct plug and play 7-way for this vehicle so you will need to start with a 4-way first like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118344 which is entirely plug an play. This can then be easily adapted to a 7-way using a 4 to 7-way adapter like the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. That said, you will need extra wires...
    view full answer...
  • Will The Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket PK11893 Fit 2003 Ford Explorer
    If your 2003 Ford Explorer came with the factory 7-way you can use the Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket # PK11893 to plug into the factory harness. Otherwise if you do not have factory wiring you will need to add the 4-Way # 118344 with our 7-Way Upgrade Kit # ETBC7. The 7-way kit also includes wiring for a Brake Controller # RED52VR.
    view full answer...
  • Trailer Hitch Recommendation for 2004 Ford F150
    2004 was a split model year for the Ford F150. Two F150 models were offered, the Heritage which was the rounded body style like the 2003 model or the new body style, like the 2005 model. The hitch you need will depend on which body style your truck is. If you have the new body style, I'd recommend the Draw-Tite Class III hitch, part # 41549. Some of the new body trucks had a vibration dampener at the rear of the vehicle. The hitch includes a bracket that lets the vibration dampener be...
    view full answer...
  • Brake Controller Installation on 2001 Ford E350 Van
    Brake controllers like the # C49UR Curt Assure aren't a vehicle-specific item. You can install a brake controller on just about any vehicle. What the installation will involve will depend on whether your E350 is equipped with a trailer connector and what type it is. If you have the factory 7-way trailer connector, it'll be a plug-and-play installation using the # C51322 brake controller harness. The harness plugs in to the connector under the dash near the e-brake pedal (see provided...
    view full answer...
    Image 1 for
  • Parts Needed with Tekonsha Brake Controller to Tow a Tandem Axle Trailer
    Yes, the Tekonsha Primus IQ Trailer Brake Controller # TK90160 will work for your 2003 Ford Explorer Sport Trac . This proportional brake controller automatically levels when mounted within a 90-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles. If your vechicle does not have a 7-way connection, you will need the Universal Installation Kit for Trailer Brake Controller # ETBC7....
    view full answer...
  • Recommended Hitch for my 2002 Ford E450 Cutaway
    I am also unable to find any hitch that matches those center to center attachment points. In this case the Curt Adjustable Trailer Hitch Receiver part # C13701 will allow you to custom fit the hitch to the frame and get you back and ready to haul. If you do not have trailer wiring the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118344 will do a great job and is custom fit for your Ford E-450 van so there will be no need to cut or splice your factory...
    view full answer...
  • Installing Brake Controller on 2002 Ford E-450
    As long as your 2002 Ford E-450 chassis is equipped with a factory 7-Way or 4-Way at the rear bumper then there should be a brake controller plug-in port behind the dash to the right of the steering column. If this is the case on your E-450 then to install a controller like the excellent Tekonsha Prodigy P3 # 90195, you will use the Plug-In Harness # 3035-P. One end of the adapter will plug into the brake controller itself and the other end will plug into the factory port behind the dash....
    view full answer...
  • Brake Controller and Install Recommend for a 2003 Ford E-350 Van
    If you have a factory 7-way at the rear of your 2003 Ford E-350 all you would need to install our most popular brake controller the Prodigy P2 Brake Controller part # 90885 is the wiring adapter part # 3035-P. If you don't have any trailer you would need to start with a 4-way. For that I would recommend the Tow Ready Harness part # 118344. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller...
    view full answer...
  • Parts Needed to Add 7-Way Wiring Harness to 1999 Ford F-150
    The correct rear wiring harness depends on what you currently have on your 1999 Ford F-150. If you have a factory 4-flat then you will be able to use the Ford Replacement OEM Tow Package Wiring Harness, 7-Way # 118242. This will plug into the OEM connector on your truck, which it sounds like you have. If you do not have the factory 4-flat with the tow package connectors you will need to start by adding a 4-way. I recommend the T-One Vehicle Wiring Harness # 118344. Once installed, you...
    view full answer...
  • Installing a Brake Controller on a 2003 Ford F-150 Without a Factory Trailer Connector
    I can certainly outline the procedure for hardwiring a brake controller on your 2003 Ford F-150. You will need three things. First, a brake controller. I recommend the Tekonsha P2 Proportional Brake Controller, # 90885. This is one of our best selling and highest rated brake controllers. You will also need the # 3035-P wiring harness specific to your truck. Next, you will need Adapter 4 Pole to 7 Pole and 4 Pole, # 37185 which will provide you with a 4-Way and 7-way connection at the rear...
    view full answer...
  • Why Does The T-One Harness Connect to Both Tail Lights On a 2000 Ford Ranger?
    The T-One Vehicle Wiring Harness # 118344 connects in line of the tail lights for your 2000 Ford Ranger. This is designed for vehicles that do not have the factory tow package wiring. It receives a signal for the running lights and turn signal/brake light on one connection, while the other connector receives signal for the other turn signal/brake light and ground connection. If your Ranger has the tow package connector the Reese Multi-Plug Wiring Harness # 74682 will connect to the factory...
    view full answer...
  • Recommended Trailer Hitch And Wiring Harness For 2001 Ford E-450 Shuttle Bus
    The trailer hitch I recommend for your E-450 shuttle bus is the Curt Adjustable Width Trailer Hitch Receiver, part # 13703. This is a Class lll hitch and it has a 2-inch receiver opening. The hitch is adjustable for frames from 22 to 72 inches wide. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
    view full answer...
  • Parts for Installing 7Way on a 1999 Ford Expedition
    Though the two vehicles are based on the same frame, they are very different and are wired very differently. If the Expedition was not ordered with the factory 7Way Tow Package, it will not have the wiring provisions for a 7Way. But the parts are available to get a 7Way installed. If you already have a 4Way flat connector, you would need part # 37185. We have a video of this part being installed on a 1999 Ford F-250 that may be helpful to you. If you do not have any trailer connector,...
    view full answer...
  • Will the Hidden Hitch # 75065 Fit a 2002 Ford F-150 with a Step Side
    Yes, this hitch will fit on your 2002 Ford F-150 as it will fit 2000 - 2003 Ford F-150 Stepside Models. I attached installation instructions and an installation video for this product for you to check out. To complete your towing setup you may be interested in purchasing the following products: etrailer Ball Mounts # EBMK4 Tow Ready Custom Fit Vehicle Wiring # 118344 (instructions attached)
    view full answer...
  • Trailer Wiring Harness that Fits 1997 Ford Escort Wagon
    For the wagon versions of the 1997 Ford Escort we only have universal style trailer wiring kits available like the Tekonsha kit part # 119178KIT. The custom fit option you mentioned would not fit.
    view full answer...
  • Trailer Wiring, Brake Controller, and Trailer Hitch for 2000 Ford Ranger
    For your 2000 Ford Ranger you'd need to first start with a 4-way that fits your truck like the # 118344 and then convert it to a 7-way with part # ETBC7 which comes with all the wiring needed to install a brake controller as well like the iCommand part # TK63VR and that would be set. Then for a hitch the Curt part # 13019 would be a great option as it's made in the USA, installs easily, and has plenty of weight capacity.
    view full answer...
  • Adding a Brake Controller and 7-Way to a 2000 Ford Econoline 150 with 4-Way Flat Connector
    The blue output wire to the trailer brakes on your 2000 Ford Van will need to be manually run from the brake controller back to the plug in the rear. The brake controller power supply and brake pedal wires are already run. Since your Van has a 4-Way you will just need # 37185 to add a 7-Way and enough wire, # 10-1-1, sold by the foot, to go from the brake controller, through the firewall, under the van, to the blue wire on 37185. When routing the wire avoid areas that could pinch or burn...
    view full answer...
  • Trailer Wiring Harness for 2001 Ford Expedition with Square Connector
    The Tekonsha trailer wiring harness part # 118344 is the correct trailer wiring harness that fits your 2001 Ford Expedition and matches your picture.
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring for a 2000 Ford Excursion
    The 2000 Ford Excursion is actually rated for 10,000 pounds gross trailer weight. The 18,000 pounds is the gross combined weight rating or GCWR. The GCWR is the most that the Excursion and trailer can weigh including cargo, passengers, and fuel. So the Excursion cannot tow 18,000 pounds and its weight plus the trailers weight cannot exceed 18,000 pounds. The trailer can weigh up to 10,000 pounds total but no more. With that said the highest capacity trailer hitch we have for your vehicle...
    view full answer...


< Previous
123. . .10



Do you have a question about this Custom Fit Vehicle Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<