To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Ford Edge with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connection secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Part of the wire harness was plug and play, the rest was run a wire from the Battery to the rear of the car, and mount the ground wire. I love the plug and play wire Harness systems, like the Explorer has.
I am very happy with Etrailer. I bought a trailer hitch and Tee connecting wiring harness and I watch some YouTube videos and the job went smooth and I especially like their design. They came up with on how to fish the brackets and the bolts through the sub frame to attach the hitch, it took me approximately the same amount of time that they said it would. I am very, very happy and I highly recommend these products.
I will never purchase another item from a trailer
I looked up the item that I wanted they said it would fit my vehicle when I got it it was not the right one I called them wanted to send it back but then they wanted me to pay the shipping to return it which was $ and something
Then they talked me into exchange event and it still cost me extra because of a different part and I guaranteed it to be here on Monday UPS and not United postal service
Of course Monday came didn't show up I looked at it and it was sent by the post office which takes about 5 days to get it from Missouri to Michigan I finally got it today but I still have not got my return money for the first one I purchased they said it might take until the end of the week to get that is a bunch of bull crap very poor service I could have got the same thing over here at the (local trailer dealer) for $ less and I could have got it on the first day
Excellent product.
Like it very muc h.
Very fast delivery and easy installation
I recommend e trailer for all your towing needs
Not to hard to install and working great
It was nice that it came in a heavy box and was well packaged.
Installation went well and it works good
It seems to do its job.
great service
well they got it right this time shipmemt was real fast the lighting kit fit like they said could not have asked for better
This is a great set up. I’ve bought these pieces from etrailer.com for multiple vehicles and it works great in each
Awesome to do business with , the hitch was on my doorstep in two days , detailed video on the wiring harness made it super easy , would definitely recommend etrailer !!
everything came as ordered if I had any complaint it would be the wire connectors I feel they should be a heat shrink type. I replaced mine with heat shrink type connectors there for four stars instead of five.
Robert
6/6/2022
I like the hitch and the bracket that I bought so the trailer light wire isnt just hanging it look nice and professional
I paid to get it in early and it didn't come in early.
Great service.
Hitch was perfect fit 2 day delivery hitch easy install wiring harder couldn’t ask for more
I found the install to be easy per video. I installed a factory hitch and installed the curt T-Connector and on my 2022 Ford Edge. I unscrewed the fenders and pope them lose and was able to just slide the wiring to the rear tail light in proper place instead of fishing and get it stuck. The hot wire was a little challenge do to there was not really any good place to route to battery
The plug-in installation went well. The wiring harness made the job look professional. The instructions were very clear and easy to follow.
etrailer is a great company with a lot of options.please use their customer service to ensure you are purchasing the correct item.i misread and purchased a cheaper wiring harness that would not connect to my taillight.they are going to refund my money but not asking first cost me three days.the hitch worked purfect.
Excellent product! Hitch and wiring kit. Installation was a breeze. Works great! Shipping was stupid fast! Will buy all my towing products from Etrailer!! Awesome company.
Easy plug and play once I got the taillights off. All wires fit inside the left taillight housing. Biggest issue was running the power wire to the front to the battery.
Working on getting it installed about week from now. Will update later.
Great product…just need better quality screws or pre drilled holes in tow hitch…
Well I have not used it
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
4/22/2025
Awesome! I'm sure the feeling is mutual haha