To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Chrysler Town and Country with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.
Features:
Specs:
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery. Connect the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (78 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system.
Had the product installed now for about a year. I'd I remember correctly it was delivered ahead of schedule. Installation was a breeze I'd say it took me longer to locate my proper impact driver bit to take off the tail lights than the actual Installation took. Main power line ended up being the perfect length to include the extra length I took up by Routing and winding it around everything possible during install.
Went on like a charm. This is my 3rd rodeo with Etrailer. Two receiver, hitches, and a weight distribution camlock. All of them were exactly as promised.
It survived burning man dust and mud so far.
The wiring harness worked just fine as advertised. It took about 2 1/2 hours to install but that is because I am overly meticulous. I could probably do it again in half the time. I am happy. The mounting bracket (18144) I ordered with the harness had a cutout slightly too small to accept the 4-pin plug. I used files to enlarge it and eventually made it fit. I suggest try ordering a different bracket from another manufacturer.
Heather A.
12/18/2018
The 18144 bracket will not work with hopkins wiring harnesses. I recommend a brophy bracket part # BK4F.
Helpful Links
The wiring harness was installed on a 2011 Dodge Grand Caravan. After watching the installation video, the install was easy. I used 0.375-in Plastic Black Split Cable Tubing to protect the wiring from abrasions and sharp edges. Discovered that the opening in the mounting bracket, part # 18144 is too small to mount the 4-pole plug.
Great fit, was concerned at first when I noticed the brake wire wasn't attached, however I also noticed the vehicle's wiring harness included wires not connected to a bulb. All signals to the trailer ran perfectly when tested.
My only issue was not having an appropriate connector for attaching the power wire to the battery. Minor issue though.
Although the vehicles harness is designed for providing a trailer signal this device provides a buffer that protects the vehicles electrical system.
Only pulled a trailer a few times. After letting my van warm up, smelled something electrical burning. Noticed left rear blinker was not working. Problem, wiring harness converter box burn up, blew the van fuse.
Less than six months old, etrailer would not replace or refund. Wiring harness only has 90 day warranty. $[XX] well spent, not
I am totally pleased with my new hitch and wiring harness. It has been just about a year since I ordered and installed it myself. Great quality. Great customer service , and the product price was very reasonably priced.
To me, this is a top notch company with top notch employees that provide top notch products. It was a pleasure to do business with them.
Oh yes, I almost forgot to mention the great “how-to” videos on their products. These are why I felt confident enough to install it myself.
One more thing. I checked around with other sources, both locally and on line before deciding (this is probably the fourth hitch that I have had over the years), but the reviews for this company and their products were more than I could resist. And the great rewiews were totally accurate. - And, they shipped promptly. My hitch fit great and looks great too - that is to say, one has to really look to even see it. ?????????? 5 thumbs up from this satisfied customer!
Great service fast shipping. This harness sure makes it a simple task to wire up my Grand Caravan for towing.
Michael
6/9/2023
Easy install. Works great
Mike L.
7/8/2023
Took minutes to install. The box back by the trailer plug we hide behind the driver brake light. We also placed the ground screw there as well. One note is to drill the hole deep enough. There are 2 body panels. One about 1/4 inch behind the one you can see. Everything else plugged in. We followed the brake lines up to the front to connect the power wire to the battery.
No problems.
Ordered this Hopkins trailer wire harness for my 2015 Dodge Grand Caravan as a replacement to the curt harness that I installed 3 years ago. After two years the curt harness stopped working so I thinking that this time the Hopkins harness should last longer because the curt harness used two sided tape to hold the control box in place but did not hold and was banging around a lot were as the Hopkins harness has tabs that I can secure the box with zip ties or screws. I was very happy with ordering from etrailer. It was easy to find what I needed and order through the site. Plus fast shipping and email communicaton that my part was shipped the same day I placed my order.
The wiring looked complicated and formidable coming out of the box but fortunately the video on etrailers website made it very easy to install. The only catch was the video kept calling the long wire that went up front to the battery a "black" wire but in fact it was red. Other than that it went very well. It took maybe 1.5 hours.
Hasle free ordering,got the item I ordered and was delivered when promised,great customer service from Rep Kayla, will keep doing business with Etrailer.
Jesse
5/8/2019
product still working great!!
Wiring for trailer was easy just plug it into tail lights and follow directions.
Most difficult for me was working from the ground routing the power wire for the
trailer light module. As I am 74 I do not move as easily as I once did. It was hard for me to get under the van to route the power wire. A lift will make it much easier.
Good price. They had two like wiring harnesses for my 2013 Chrysler T&C. Because of their excellent DIY videos, I could compare, picked this one because little control module gets attached inside body under left tail light, whereas the Curt harness attaches the to the left inside of rear bumper- less than ideal in N Illinois.
Plug and play. Hardest part was running a wire under the car. Easy as pie.
R.d.
6/2/2022
Still as good as the day I got it
Really like it.
After stringing the wire to the battery ended up a foot short had to splice it, as the old saying goes "Better a foot too long than an inch short". Sent this message to the manufacturer.
Sierra K.
12/13/2021
The 5:10 mark of the attached video shows the route to the taillights but I am assuming you mean the route to the battery, which starts at the 7:00 mark. This shows the best route to take so that you do not have to splice extra wire to the harness.
Helpful Links
tv-install-hopkins-4-pole-trailer-wiring-harness-2014-chrysler-town-and-country-hm11141995.aspx
Excellent fit and finish. Looks great on van. Took a little longer to install but I didn't have a lift and needed an extra pair of hands to lift hitch up into position. Watching the video is a great idea before you start.
Everything we needed to assemble the cargo platform and comply with DOT. We had to modify some parts but I think that was due to our vehicle and not the product.
This was a easy installation job ,went will ,everything worked. Thought there was suppose be double sided tape with the product. Maybe that was the other items i review ..THANK YOU ETRAILER.
Product installs easily but pay attention to the instructions for running the power wire to the battery...the wire is only long enough to go the route listed in the instructions
The connections went together well enough, but leaving exposed wire in our climate is a recipe for failure. I used larger more durable zip ties and a length of hose to enclose the "rear" wires. Why Chrysler does not run an "accessory" hot wire to the rear of their minivans is DUMB. That little red wire running the length of the underside of the van is gonna be a problem.
Great rig, easy to install.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
5/25/2024
Still going strong