To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your Chrysler Pacifica with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies and some interior paneling to access this harness. Once you've plugged in the connector, run the red hot lead up to your car battery. Connect the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
I like that it has a relay and is isolated from the factory wiring and does not require any splicing to tail lights. I don’t like that it requires a power wire to be run up to the battery underneath the van. No easy or safe way to do that on this vehicle. Ended up taping into the 12v auxiliary outlet in the cargo area, a lot easier and safer.
Install wasn't bad at all. I appreciate the plug-and-play connections at the rear taillights. Fishing the wires up through the back corners of the van was challenging, but no worse than I expected. Would've liked to have had slightly longer cables from box to left taillight, and longer ground cable, so I could have had more flexibility in location of box install and ground connection.
Recommended by neighbor. Works great and with your videos very easy to install.
Very quick delivery Pleased with my Pu rchase
Great help from the etrailer.com staff, to determine what to order and how to install it. I am very happy with my choice to use them as a source for my equipment.
Had all the needed parts. Good quality heavy duty wiring. Took longer that I thought to install because I had to lower the underside plastic shield protection to get a pathway for the black hot wire from the battery to the wiring harness. I have a 2022 Chrysler Pacifica.
Great product, exceptional quality.
Works like a charm!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.