THIS ITEM IS NOT A FIT FOR
2001 Chevrolet Silverado
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
Item # 18252
Our Price: $28.31
2001 Chevrolet Silverado
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (209)
- Q & A (0)
- Photos
2001 Chevrolet Silverado - 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Universal Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
- 6 Feet Long
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wiring configuration below) and labeled
- Included circuit tester helps ensure wiring is correct during installation
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 72"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 18
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use the included tester to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
18252 Tekonsha Chevrolet Silverado Wiring Harness with Chevrolet Silverado End 4-Pole Connector Kit and Circuit Tester - 6' Long
20252 Alternate
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252
Average Customer Rating: 4.6 out of 5 stars (209 Customer Reviews)
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.by: Vincent05/30/2019
2014 Smart fortwo
Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks
by: Tim C10/26/2019
Awesome product never any issues use along easy install practically don’t need instructions
by: Michael11/07/2022
Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.
Katrina B.
11/18/2022
I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.
by: Eric 05/22/2023
Chevrolet Corvette
This harness worked great for my Corvet te.
by: Brian03/14/2019
First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !
Mike L.
3/15/2019
We have a link to the installation instructions as well as some install videos on the product description page.
by: Tom08/23/2021
1990 Dodge Van
Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.
by: David06/01/2019
1984 Jeep CJ-7
I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.
by: Johnny12/16/2018
2007 Ford Focus
This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.
Mike L.
12/17/2018
On the product page, we have a link to the instructions as well as a couple of install videos.
by: Russell04/03/2017
2006 Ford Focus
The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.
Russell
4/4/2018
The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!
by: Timothy04/06/2023
Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.
by: Matt F03/09/2020
Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.
by: Timothy09/17/2022
1992 Dodge Van
Over all good experience
Missed the bolt package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you
by: Stan05/24/2018
1998 Chevrolet Blazer
Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.
by: Jeff G.06/10/2017
2005 Ford Focus
I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.
by: Mike D.05/06/2020
I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.
by: Tony 05/30/2023
Their customer service is amazing and within a few day my order was here.
by: John11/13/2021
The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.
Jenny N.
11/16/2021
I will have our customer service team reach out to you.
by: Kyle03/23/2017
2001 GMC Sierra
Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have
Kyle
3/23/2018
Perfect!
by: Gene08/15/2014
Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.
by: Frank07/08/2020
I purchased the Draw-Tite Receiver and wiring kit. All parts were easily identified. Good printed instructions. Everything assembled easily and fit perfectly. It took about 1.5 hrs to complete. It will be used to tow a small utility trailer. Highly recommend this equipment and etrailer.com. Thanks.
by: Jason05/18/2020
Ordered a few weld on trailer hitch receiver tubes among other trailer parts. Parts were delivered in a timely manner and the quality of the receiver tubes is excellent. I will buy from this group in the future when I need trailer parts.
by: Arnie09/21/2017
4-pole Hardwire Kit with circuit tester.
I needed the kit to attach rear (break/lights/back-up/tail lights) assembly.
by: Mike K05/24/2018
2013 Ford Edge
Worked perfect. I used it to extend the pigtail on my tow dolly. etrailer has great shipping & service. Have bought from them many times.
by: K Sally06/07/2017
Hummer H3
Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.
by: BLG2706/16/2018
1999 Ford F-150 and F-250 Light Duty
This is the 3rd excellent review I have written about eTrailer. com this month. Bottom line the product came as and performed exactly as I expected. Very good quality at a fair price. Their products, pricing and overall service are exceptional. You can't go wrong dealing with this homegrown American company. I am confident this will not be my last positive review.
25
209
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Trailer Wiring Harness that Fits 2003 Chevy BlazerWe have trailer wiring harnesses that fit your 2003 Chevy Blazer but none of the kits are custom fit as that style of wiring isn't available for your vehicle. Instead you'd have to hardwire in a 4-way with a kit like the part # 18252 and you'd be set. I attached an install video for this on a similar 1996 Blazer for you to check out as well.
view full answer... - Brake Controller Show Full Voltage with Manual Override But Half with Brake PedalMany proportional brake controllers require that the vehicle be moving to send back the full voltage when stepping on the brake pedal. Depending on the brake controller you have this could be what is going on. You may also need to adjust the output settings. The manual override will send back the full amount of voltage (up to what it is set at) but it may not do so with the brake pedal depending on the controller and its settings. I have included a couple of links on testing and troubleshooting...
view full answer... - Installing Trailer Wiring on a 1959 Chevy TruckThe 4-Pole Hardwire Kit, # 18252, is a general hardwire harness. You will use the included circuit tester to probe the wires behind the tail lights. On the driver side, you will attach the yellow wire on the harness to the tail light wire that carries the left turn signal and brake lights. The brown wire will attach on the driver side to the tail light wire that carries the running light signal. The white wire is ground and will attach to the vehicle frame. The green wire will get routed...
view full answer... - How To Install 4-Pole Hardwire Kit 18252The 18252 hardwire kit needs to be cut and spliced to your vehicle taillight assembly wires. I have included a link to a video of a hardwire install on a 2000 Dodge Neon. There are plug and play type wiring harness that are easier to install for some vehicles. I would be happy to confirm what the best wiring option is for your vehicle, if you write back with your vehicle year, make and model.
view full answer... - 4-Way Replacement Recommendation to Replace a Thick 4-Way on a 2013 Ford EdgeI think the easiest solution would be for you to cut the 4-way off of your 2013 Ford Edge and then wire up a new 4-way to the wires. You could use the 4-Pole part # 18252 you referenced for this and you would be able to connect to your trailer without a problem.
view full answer... - Troubleshooting Brake Controller that Only Shows a Few Volts When Tested with Brake PedalIf you have a proportional brake controller you won't get full voltage when using the brake pedal and testing the pin since the controller needs to see sense deceleration before really applying voltage. If you have a proportional brake controller like it sounds like you do this would be what's going on. A lot of proportional controllers will put out a very small voltage spike when they sense that the pedal is applied which explains why you saw a small amount.
view full answer... - Reinstalling Heat Shield After Installing Trailer Hitch on 1998 Buick LeSabreThe Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36216 (no longer available) for your 1998 Buick LeSabre requires removing the heat shield which requires removing rivets, and even cutting or bending the heat shield if it is going to be reinstalled. The reinstallation is not required, but if desired would require riveting or reinstalling with screws slightly larger than the rivets to bite into the same location for a solid connection.
view full answer... - Trailer Wiring Harness Fit for a 1981 Chevy El CaminoThe # 18252 would work for your 1981 Chevy El Camino, you would need to splice the harness into the existing wiring behind the tail light assemblies. I will link you to an install video that will walk you through the process. The video shows an install on a different vehicle, but the process would be very similar on your El Camino.
view full answer...
- Can 1992 Buick Century Tow a TrailerI could not find an online owner's manual for a 1992 Buick Century but I was able to find one for a 1993 model year and on page 176 it states that the '93 CAN tow a trailer. I attached that page from the 1993 owner's manual. Capacity is up to 1000-lbs, or up to 2000-lbs if the car has a V6 engine with a four speed automatic transaxle and is equipped with the optional heavy-duty engine cooling system. Both model years are within the same generation of the car so chances are they could share...
view full answer...
- Installing a 4-Pole Wiring Harness on a 2002 Chevrolet AstroThe Draw-Tite Wiring Harness, # 18252, will work on your 2002 Chevrolet Astro. This wiring harness will splice into your vehicles tail light assembly wires. You will need to locate the tail light wires on your vehicle and test the wires using the circuit tester that is included. The wires will need to be matched by function. The brown wire on the wire harness is for the tail lights, the green wire is for the right turn and brake lights, the yellow wire is for the left turn and brake lights...
view full answer... - Should the Wire Just Before the Braking Assemblies Receive 12 VoltsIt is normal for the brake output wire to lose voltage as it travels from the brake controller to each braking assembly. The amount of drop should only be around 1-2 volts so if it is more than this then there is an interruption in the wire that would need to be either repaired or replaced. You can use your multimeter to find where the loss (if any) occurs. With that being said, if the brake controller is not at the max settings and you are not using the manual override then it would not...
view full answer... - Trailer Running Light Pin on 2013 Ford F-150 Trailer Connector has No PowerIt could be a tow package fuse or relay that is causing the trailer running light circuit to fail on your 2013 Ford F-150. In the power distribution box the fuse that feeds the trailer park lamp relay is in position 6. Also check position 67. I am almost certain that it is a fuse/relay that needs to be replaced but if not then like you said this is an issue somewhere in the wiring that will need to be tracked down.
view full answer... - Solution for Adding Second 4-Way to 4-Way WiringBest option we have for that would be a 4-way kit like the part # 18252 which you can splice into your current 4-way wiring to give you a second one like you are looking for. There isn't a y-adapter available like you mentioned.
view full answer... - Solution for Trailer Wiring Harness on a 2008 Ford F-150 With Dead CIRCUIT at Fuse SlotsIf there isn't power to either side of the fuse slots on your truck when the blinker is on that is not a great sign. That would indicate a much larger problem upstream of the fuse box. To save yourself the headache, you might just bypass the factory 4-way by installing a part # 18252 which would just hardwire to your truck's wiring.
view full answer... - Installing Hardwire Trailer Wiring Harness On 2001 Buick Regal LSUnfortunately there is no plug-in kit available for your 2001 Regal, so to install a trailer wiring harness on your vehicle it will have to be hardwired. I recommend the Draw-Tite 4-Pole Hardwire Kit, part # 18252. I have attached a link to an installation video for this harness on a Century that will be similar. You need to access the wires at the back of the tail lights in the trunk of your Regal. You can use the included circuit tester to identify the correct wires to attach the harness to.
view full answer... - Brake Pedal Only Gives 2.9 Volts on Brake Controller on a 2006 Dodge Ram 1500To diagnose this issue I would need to know which brake controller you have. If it has a level adjustment knob on the side and that adjustment is not just right it can affect how much voltage goes on when using the brake pedal. Similarly, if the controller is tilted or turned to one side or the other or otherwise mounted outside of the range specified in the instructions it can cause the controller not to function properly. If mounted and leveled correctly then the issue could be the connection...
view full answer... - Troubleshooting Brake Controller that Only Gives full Voltage When Manual Override is AppliedIt sounds like you have a proportional brake controller installed in your 2010 Ford F-150 and you are trying to test the brake output of it with the vehicle at a stop. Since the controller is proportional it will need to sense deceleration before it will start to apply a decent amount of braking power. Most likely your controller is working fine. You should test it with a trailer connected. Make a few slow stops to see if the controller starts activating the brakes of the trailer.
view full answer... - 4-Flat Trailer Connector for 2004 Ford Ranger With Damaged Factory ConnectorOkay, so it sounds like your 2004 Ford Ranger has a damaged or cut off connector, and you are correct that you will need to splice in a new 4-flat, but the kit you asked about is not going to work. That is a wiring harness for flat towing and plugs into tail light assemblies. Instead, because of the damage done by the previous owner you will have to hardwire in a new connector, the 4-Pole Hardwire Kit with Circuit Tester # 18252. This will give you the 4-flat you need at the rear of your...
view full answer... - Fuses To Check on 2006 Ford Expedition When Trailer Running Lights Don't Work A blown fuse under the hood of your 2006 Ford Expedition is indeed a common cause for the trailer running lights not to work. I pulled up the online version of the owner's manual for the Expedition and you will want to check the 20 amp mini fuse located in the number 10 position inside the passenger compartment fuse panel along with the R201 relay. These are both connected to the trailer running lights circuit for the vehicle's factory 4-Way connector. If replacing the fuse/relay does...
view full answer... - 4-Pole Wiring Harness for 1987 El CaminoThe only trailer wiring that has been confirmed to work with your 1987 Chevrolet El Camino, is a hardwire connector kit like the Draw-Tite 4-Pole Hardwire Kit, # 18252. We do not have a plug in style that has been confirmed to work with your vehicle. Although the connector for another vehicle may look very similar, it has not been tested for use on the El Camino so there would be no guarantee that a it would work for you.
view full answer... - Draw-Tite Wiring Recommendation for a 1996 Chevy BlazerIf the six wires you found coming off of your 1996 Chevy Blazer are for trailer wiring you could certainly use 4 of them to wire up this 4-Pole Hardwire Kit Including Circuit Tester # 18252. The colors should match up color for color from your wiring to the # 18252. You will want to use the included circuit tester to make sure you wire it up correctly. On part # 18252 connect the White wire to a clean metal surface for ground, Brown to the running light circuit, Yellow to left turn and...
view full answer... - Recommended 4-Way Trailer Connector Installation On 2013 Ford F-150If your F-150 has a 4-way connector it is typically located near the rear license plate. It can be tucked back up behind the bumper and may even be taped or zip tied to other wires or the frame of the truck. If there is no trailer connector, you will need to use the Draw-Tite 4-Pole Hardwire Kit, part # 18252, and locate the correct circuits behind the vehicle taillights for installation. The kit includes a circuit tester and the quick-splice connectors needed. I have attached a link...
view full answer... - Parts Needed to Add 4-Way to Fifth Wheel Trailer for Towing Second TrailerWhat you would need is the part # 18252. This is a 72 inch long 4-way connector that comes with quick-connects so that it can easily be attached to a trailer's taillight circuits. It would be just a matter of tapping all of the correct circuits for the wiring. Adding the 4-way to the vehicle would be pretty difficult and would require quite a bit of wiring.
view full answer... - Trailer Wiring Harness for a 1983 Dodge D150 PickupFor your 1983 Dodge D150 pickup you will need to use a hardwire harness, # 18252, because there aren't any T-connectors that are confirmed to fit. The good news is the hardwire harness costs less and is not all that difficult to install at all. I have linked a video showing the process of testing the vehicle wires and installing the harness.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Sabrina W
Video by:
Alan C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent S.
5/31/2020
Just fine.