To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Chevrolet Blazer with this custom wiring harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required.
Features:
Installation
This custom-fit T-One connector plugs into your vehicle's factory tow package wiring harness, which is located behind the access cover at the center of your rear bumper.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (270 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into OEM tow package harness - no cutting, splicing or tapping required.Great service. I installed the trailer hitch and wiring in 45 minutes. It was a simple install. I'm in my 70's that shows anyone can do it
Very nice quality. Installation was a snap. Video very helpful. I chose to use a step bit to enlarge the hole. Took two seconds. This is my second hitch from George. Great prices, excellent shipping time. I chose to cut the bumper cover to reinstall. Looks more trimmed out and intentional.
Great product, easy installation, outstanding support from everyone I worked with.
Took me about an hour and the help of my son and son in law to get it done, but it saved me $800 from the dealer’s quote. 2 people could have done it, but 2 to hold the hitch up until I got the bolts started really made it easy. The wiring adapter took less than 5minutes and has worked perfectly.
I will use etrailer again.
The Curt hitch cost a bit more than the Draw Tite, but I am drawn to "made in USA", which Curt bragged about, and Draw Tite doesn't mention..(ie made in China).
If you look at the pictures of both hitches, you can see that the Curt hitch has a considerably larger cross member, which, I feel, can account for at least 1/2 the difference in cost.
I was sold on etrailer because of their excellent video on you tube. The installation went without a 'hitch' (ouch!). The video was very accurate and explains everything extremely well. The only difference for me was that I did not have to enlarge the 'fishing' holes; mine is a 2018 XT5, and the holes were plenty large for the bolts and doublers. I also installed the Tekonsha 118720 wiring harness, which amounts to simply 'unplugging a dust cap, then plugging in the harness' - there is absolutely no reason for this to take more than 2 minutes....(it took me 5).
As many have noted, the hitch is pretty heavy (I'm guessing 40 to 50 lbs). The weight is not such a problem, except that it is also pretty awkward. What worked very well for me was to not raise the car at all. Where the cross tube, and the receiver tube meet (middle of the hitch) is braced with a large, flat plate (safety chain eyelets) this wide plate is ideal to set on a floor jack, and the hitch balances very well. My wife 'manned' the jack, and I rolled around on a creeper guiding the hitch into place. The 'fishing' wires are long enough that they can be passed through the hitch's bolt holes while the jack is still low. Keeping the wires tight as the jack is raised guides the hitch right into position. I had to 'wiggle' the hitch a little as it passed in between the muffler and the bumper cover, then I was home free!
I didn't really time the procedure, but I would estimate about an hour, start to finish. Not bad for a "mid 60's, fat, out of shape, fella" & his 60(ish) wife!
My trailer lights use the round, 6 pin connector, so I made a bracket that bolts to the cross tube, and holds the 6 pin receptacle. I then cut the 4 pin fitting off the wiring harness, and connected the wires to the receptacle.
Also, I didn't care for the idea of having to keep up with a 7mm nut driver, so I decided to install "Southco 1/4 turn wing fasteners".
Those last two projects took almost a whole day (including nap time!)
I attached pictures of the finished project. Probably doesn't show much..I didn't take pictures as I went.....& I'm not going back!
Easy ordering and quick delivery always.
I put a new receiver on my wife's 2020 Cadillac AT5 primarily for a bike rack but I thought I should do the wiring harness also. it was simple to install and it worked without a problem. Glad I made the choice to add the harness with the receiver.
Don’t buy your after market parts anywhere else. Everything that we buy from e trailer is as advertised and works great.
Anthony
8/14/2023
It still works and we use it often. After a year I still stand behind my review.
I am so excited and amazed at this product. The dealership wanted to charge me $462.34 to order it, and $429.00 to install it. $891.39, and that doesn't include tax and fees. I must say YouTube is my very best friend as I install the hitch and harness in less than an hour on my 2017 Acadia, and saved [About $750]. I will order all my needed items from Etrailer. The order can within four days. Thank you and if I could give 10 stars I would. CET Thomas, Aka Batman, Byron, GA
easy easy, that's all i can say, video instructions were perfect, and it was a piece of cake to install!
Thanks so much!
The hitch and wiring plug fit perfect was easy to install, very pleased with the product,
Product arrived in three days. Perfect fit for my vehicle. Simple, plug-in installation, nor fishing of, or splicing of wires. I have used this company in the past with the same great products and services.
Robert B.
11/2/2020
One year out and the product still performs. Easy to install! I was able to reach right in and complete the plug-in, without removing any body panels.
Fastest ever!
This 4 pin connector was an exact fit for my 19 xt5. There are two plugs under the bumper that look similar. Once you remove the cap to the plug that this plugs into on your cars harness which isn't hard you plug in this 4pin into it. The length is great as well. It's literally plug and play. The 4 pin has a rubber boot that hooks onto the saftey chain anchor on your hitch and covers the 4pins when closed, this is probably the best feature. No more dragging it down the road accidentally.
Instead of buying a new truck we bought a new SUV and purchased a receiver trailer hitch/Hiring for the SUV and a trailer to use instead of a truck, to pull the trailer that’s The best thing we ever did when we brought this product from etrailer.com A great product, cost-effective, easy instructions to follow and easy installation. A very well engineered product, I was designed exactly for Our new XT5 SUV . Easy to follow instructions I was actually easy to install. Highly recommend etrailer.com and I will use it again when my other new car arrives. A great company with cost-effective and great value automobile parts.. Keep up the good work and by the way great customer service [Thumbs up]
Everything arrived in a timely manner and well packed. The install videos made installation easy. Only took an hour or so. The wiring harness for the trailer lights was correct which made that super easy. Towed my boat the next day. I would definitely recommend Etrailer.com
High quality product at a great price! Came in only 3 days and free shipping as I also purchased a hitch. I would buy again from these guys, fantastic service!
Hal
1/21/2022
Installation for both the wiring harness and the hitch was very easy and the instructions for both were spot on. I couldnt be happier!
The hitch and wiring harness were a breeze to install using the videos. They have served well for the many times I have used my bike rack on my 2018 GMC Acadia.
Harness looks to be made of good quality wiring that will hold up for years to come. Super easy installation of just plugging it into the vehicles existing wiring without splicing any wires makes this harness a great choice. I installed it in minutes during my hitch installation on the vehicle so it made it a little simpler as the rear bumper cover was already removed.
It's the perfect answer to my problem. I put it on immediately, it was so easy and it worked great ??
Excellent quality connector plugs into factory harness and locks in place. Quality four wire pigtail and flat connector make for a nice wiring harness.
Easy to install once you get to that st ep
Shipping container was partially opened when received. Several pieces of hardware was missing. Finally spoke to someone after having to wait approximately 30 minutes after calling and put on hold. Person at etrailer.com was pleasant and placed an order for the missing parts.
My hitch arrived a day sooner than original date. I installed by myself and fit and finish were perfect. I’m able to put the hitch cover in place and you can’t tell I have a hitch. Great hitch, exceptional quality, and easy to install.
good fit E.Z. to install. ETRAILER always the way to go. THANKS
The wiring harness I purchased for my 2018 GMC Acadia worked great. Was easy and quick to install. Saved me from having to wire in trailer power myself. Very straight forward. Just plug in and pull wiring to the hitch.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Edward
7/14/2024
It works great, no problems. The cover goes over the hitch easily when not in use