JR Products adjustable cup holder provides a stowable drink holder inside your vehicle for securing bottles, cups, and cans. Compact foldable design folds up when not in use. Screw-mounts easily to any flush surface. White.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everybody, Ryan here at etrailer. Today we're gonna be checking out the JR Products cup holder, which is adjustable and you can also fold it up like that. And this is gonna be available in several different colors. So you have tan, like we're showing off here today. There's a white one, a black one, and a gray one as well. So you have a few different color options to choose from to match your application the best.
When it comes to these cup holders you know, either really popular on boats motor homes, campers, things along those lines. But what's nice about 'em Is as long as you can secure it to a surface, you can pretty much put these things anywhere. So you can really get creative on where you can mount 'em up and what you can do with 'em. Honestly, on moving vehicles like a boat or camper, RV you know, they take abuse out in the sun and everything and these are almost a maintenance item honestly. After a few years they tend to kind of get loose and get sun faded, damaged, things along those lines.
And so this'll be a great option for a replacement or even an upgrade. This particular cup holder is actually one that I purchased and putting it on my own personal boat here to replace this one. So this original one, it still worked it just started to get worn out like we talked about. And over time, you know, I hit waves and stuff and it would want to kind of open up on itself. It just got super annoying.
And so I figured well we'll try this one out. And immediately, as soon as I got this one on here, the first thing I noticed is how much thicker all the plastic is. So I don't know if we can pick that up, but this one it's all super thin and this one is very thick and that holds true. It runs up through the whole entirety of the cup holder. Everything just seems like it's beefed up a little bit more.
So you know, for how I use it or plan on using it, that should come in handy. One thing I did notice, so the clamps here for the arms, you know they're adjustable to accommodate different size drinks but they work a little bit different than the majority of 'em I seen. So these swing open and close like this whereas opposed to a lot of the other ones like my old one those kind of open up that way. I like this better. It's a little bit easier to work with. This is super notchy, but one thing I did notice if you have kind of tumbler's that are bigger, shaped differently they'll fit in there good but these just don't and maybe it's this particular cup these just don't grab it as tight as I would like it to. You know, in some cases, like on a camper let's say if you're not moving, who cares, right But this, I want it to be solid but I'm not a huge tumbler person. I usually have cans. And with the cans this thing grabs it super tight, it's locked in, not gonna go anywhere. So just something I noticed and I thought was worth mentioning. In terms of correcting my original problem. I think this one should do the trick. Everything kind of snaps in and holds tight. Granted it's brand new so time will tell once we get some time on the water with it but for now seems like definitely an improvement and I feel like should hold up for a little while. Yesterday we actually did, we looked at this one as well. We carry this one, it's an Optronics. This one's only available in black and seems like it's well made. Not as thick of plastic and stuff as our, as this one here. But one thing I do like is the parts that kind of keep everything closed. This one's really tight. There's some metal pieces in there that are kind of spring loaded, so those should never wear out. I want to think, as opposed to this one which is kind of plastic but what made me choose this one is not only the color but like I talked about this ratcheting adjustable part. I think this one holds cans better. This one tumbler's better. And like I said I'm not gonna be really using it for tumbler's. So that's kind of what made me lean towards this one a little bit more. We'll just grab a few measurements now to make sure that this is gonna work with what you're trying to put it on. So the actual front piece could be a little bit wider than the back mounting point. So the cover, I guess you could call it in terms of the width be about 4 inches. And this way it's gonna be right about 4 inches. Pretty standard. The back of it, so this part's gonna get, you know, mounted up to the surface there. That's gonna be about 3-7/8 that way it'll about hold the same for this way too about 3-3/4 of an inch. And then these mounting points, a lot of these cup holders are pretty universal but sometimes they're a little bit different. And so to figure that out I'll just go from center to center and that will be about two and what would that be 2-5/8 of an inch roughly. And then this way, looking at about an 1-3/4. So you know, chances are pretty good, this'll be a direct replacement to existing one or you know, it gives you a lot of different mounting options in terms of getting this fixed to your vehicle. And as a bonus too this one is gonna come with some mounting hardware. Not a huge deal for some people, but if you don't have any it can kind of be a pain sometimes to dig through your stuff or go to the store and buy these separately. So if you need 'em, you got 'em. But aside from that, you know, that's really all there is to it. What kind of made me lean towards this one was what how I talked about it gripping the can better at least in my opinion and having that choice of color options, you know, so you can really pick out the one that matches best and give you the cleanest appearance. But I think that'll about do it for our look at of the JR Products adjustable cup holder.
Average Customer Rating: 4.8 out of 5 stars (32 Customer Reviews)
JR Products adjustable cup holder provides a stowable drink holder inside your vehicle for securing bottles, cups, and cans. Compact foldable design folds up when not in use. Screw-mounts easily to any flush surface. White.These work great by the bed that does not have a nightstand.
Works as it should
Excellent quality!
It fits perfectly. Thank you
Used your cup holder to mount an outside security camera on a wooden fence, see three photos. I did drill drainage holes.
I installed two in our camper van. Need to order a couple more... Love the way they fold flat.
After one year post-installation, the cup holder I bought from etrailer.com are holding-up great! These are so useful, convenient, well-designed, sturdy, and a great value.
Excellent product. I am using the cup holder in my
airplane. There is little room in the cockpit so a
folding cup holder is a fine addition and when folded
does not take away from very limited space.
Still holding my drink just fine
It does what I expected it to do
There are other cup holders for a little less money, but don’t be fooled. These are thicker, stronger, and should last a long time.
Very happy that the cup holders work for a large range of cold and hot drink containers. The cup holders came quickly, were well packed and have met my expectations and needs.
The cup holders are perfect for my needs. They are better build than anticipated. Time and use will determine if they are worth buying.
What expected and will be great to add to the trailer
only thing that would improve product that the holding rings were more ridget or use a stiff spring to hold them in place better , to prevent side to side motion.
VARY GOOD CUP HOLDER ANY SIZE WILL FIT AND EASY TO INSTALL.
This works great and it holds its adjustment. Installed on the side of a garage cabinet in a couple minutes. My order was filled and shipped in no time. Great place to deal with.
Although I may not of purchased a lot from strained, but the things I have purchased are what ordered, good quality and delivered within days.
One side no longer grips
It was perfect already installed. Than ks
Do you have a question about this Cup Holder?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.