TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1357 reviews)
Price: $387.71
Need help with installation?
Locate installers near me- All Info
- Reviews (1357)
- Q & A (0)
- Photos
TorkLift Camper Tie-Downs
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
F3004 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLF3004
This Product Fits The Following Vehicles
- 2005 - 2007 Ford F-250 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2005 - 2010 Ford F-250 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2005 - 2007 Ford F-250 Super Duty 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2005 - 2010 Ford F-250 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2005 - 2007 Ford F-350 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2005 - 2010 Ford F-350 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2005 - 2007 Ford F-350 Super Duty 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2005 - 2010 Ford F-350 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2008 - 2010 Ford F-450 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2000 - 2012 Ford Ranger 6 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLF3004
Average Customer Rating: 4.7 out of 5 stars (1357 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Robert05/18/2020
Everything I expected and more. The quality is obvious as soon as you open the box great product can't wait to get it installed and pick up mu new camper.
by: Kristie01/23/2023
Great quality and fast delivery
by: Chris 08/29/2022
Easy install and works great!
by: Timothy07/08/2022
Great product very easy to install and use
by: Kenneth 10/12/2019
Good quality- Easy install-- Pricey.
by: Adam07/25/2019
Very heavy duty and very fast installat ion.
by: Robert J.12/10/2016
Excellent product and excellent customer service! After a year products still going strong.
by: Mikey P11/30/2020
Prefect fit. Much nicer set up for my camper.
by: Gary 07/14/2021
Work extremely well.
by: mike d07/08/2016
works well
by: Maria 01/12/2023
by: Bruce d08/10/2017
Arrived on time. Installed smoothly. Great service
by: Levi 11/30/2022
by: Ronald 11/16/2023
by: Jeffrey 12/19/2022
by: Dennis01/08/2019
Great product...
by: Rayce07/14/2021
by: Jesse 07/28/2022
by: Alan 07/29/2022
by: Todd 07/24/2022
by: Jeremy 04/26/2021
by: Alfre05/13/2021
by: Gary 02/10/2021
by: Fred06/02/2023
Got the tie-downs today. Shipped quickly. There is an extrusion ridge on the inside of the square tubing my hitch was made from. I had to file that out. Once done, everything slipped together like an Erector-Set project. Whole thing took 20 minutes. Very pleased.
by: Flanagan06/18/2023
Easy to install. Took less than an hour with no helper. They are very sturdy and I expect them to last.
2020 RAM 3500 with OEM hitch.
25
1356
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Torklift Tie Downs # TLF2012 and TLF3004 for Ford F-250The Torklift Tie Downs part # TLF3004 and # TLF2012 are sold as complete kits and do not have replacement parts sold for them. With either kit though you'll be able to use the Fast Guns so you wouldn't be replacing everything that you have currently.
view full answer... - Truck Bed Camper Tie-Downs to Fit a 1988 Chevrolet 1500 PickupUnfortunately, the # TLF3004 and # TLF2011 camper tie-downs are for Ford trucks and will not fit your 1988 Chevrolet 1500. I've linked our selection that is designed for your truck. In order to give you a specific recommendation I'll need to know your truck's bed length, if it has a factory hitch, TorkLight hitch, or another hitch, and if it has a step or board under the truck.
view full answer... - Weight of TorkLift Truck Bed Camper Tie Downs for 2005 Ford Super Duty TruckThe TorkLift # TLF2007 weighs just under 35 lbs and the # TLF3004 weighs just under 25 lbs minus the packaging.
view full answer... - Weight Difference Between Aluminum and Steel Torklift Tie DownsThe part # TLF2012A weighs 27 lbs and the # TLF2012 weighs 31 lbs. The # TLF3004A weighs 35 lbs and the # TLF3004 weighs 28 lbs. I would not recommend using two hitch extenders with a bike rack. You might consider a front hitch to carry a bike rack.
view full answer... - TorkLift Rear Camper Tie-Downs for 2007 Ford F-350 with 8 Foot Bed and Factory Hitch If your 2007 Ford F-350 has the 8 foot bed, is equipped with the factory trailer hitch, and doesn't have a board or step beneath the truck bed, the correct TorkLift Rear Tie-Down Kit is part # TLF3004 or # TLF3004A for the aluminum model that will resist rust and corrosion. If you also need the front kit you will use # TLF2011 or # TLF2011A (aluminum).
view full answer... - Compatible TorkLift Tie-Downs For A 2006 Ford F-350 Super Duty Dually With 8' BedSince you indicated that your 2006 Ford F-350 Super Duty Dually has an 8 Foot Bed with a board or step underneath the truck bed with a factory installed hitch the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4006 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3004 you referenced would be a compatible fit. These two are the only compatible TorkLift options for your vehicle. You will also need some turnbuckles to secure your truck bed camper to your tie-downs....
view full answer... - Installation of Torklift Camper Tie Down TLF2011 On 2006 Ford F250 DuallyI spoke with my Torklift representative, who tells me that he's ran into this problem before. Rather than trying to pull the bolt, star washer and plate washer through the frame as one unit, attach the bolt to the fish wire, then slip the plate washer and star washer on the fish wire, but don't slide them all the way down through so they're on the bolt. Fish the wire through to the other side of the frame, and use a flat blade screwdriver to push the star washer into place, then the plate...
view full answer... - Recommended Camper Tie-Downs for Use in 2008 Ford F-250 with 8-Foot BedYour best choice in a camper tie down will depend on how your F-250 long bed is equipped. On the linked page you can use the drop-down menu at the top of the page to select how your truck is equipped, specifically whether it has a board or step underneath the bed and the type of hitch that is installed. For example, if you have a factory hitch with an open cross tube and no board or step underneath truck bed Torklift offers their # TLF2011-TLF3004. The linked video shows installation. The...
view full answer... - Recommended Truck Bed Camper Tie Downs for 2017 Nissan Titan XD 8' BedI do have an option for you but there are no custom frame mounted truck bed camper tie-down brackets for a 2017 Nissan Titan XD with an 8' bed. Therefore, our only options are universal bed mounted camper tie-down brackets like the Brophy Clamp On Camper Tie-Downs part # HSSF which you can then secure your camper to using the Brophy Basic Turnbuckles part # TDHP.
view full answer... - Rear TorkLift Camper Tie Downs for 2007 Ford F-350 with 8 Foot Bed and Aftermarket Hitch For the 2007 Ford F-350 8 foot bed with an aftermarket (but non-TorkLift) hitch installed and no step or board beneath the bed, the correct rear camper tie-down kit is the TorkLift # TLR3500. For the front kit you will use part # TLF2011. I have attached a sample install video below that you can also check out.
view full answer... - Recommended Camper Tie-Downs For A 2008 Ford F-250 With A 6-3/4' Bed For your 2008 Ford F-250 with a 6-3/4' bed you'll need the TorkLift Camper Tie-Downs - Front # TLF2012 and Rear # TLF3004. If you have running boards or steps that extend under the bed then you'll need to remove them in order to fit the front tie-downs. To Complete your setup you'll also need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.
view full answer... - Recommended Camper Tie-Downs for a 2008 Ford Ranger Extended Cab 4x4 6 Foot BedThe Brophy stake pocket camper tie downs part # TDSF will fit most full-size pickups with straight fenders and single-wall construction. Since your 2008 Ford Ranger extended cab is considered a compact pickup truck, the Brophy stake pocket camper tie downs won't be a fit. If your Ford Ranger has a 6 Foot Bed - without running boards or steps underneath the truck bed, and with a factory installed hitch, then use # TLF2013 for the front and # TLF3004 for the rear. If your Ranger has a 6...
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2008 Ford F-350 Short Bed Factory HitchThe correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2008 Ford F-350 Short Bed No Step Factory Hitch is part # TLF2012 for the front and part # TLF3004 for the rear. These can then be paired with the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK to complete your setup.
view full answer... - Are Torklift Camper Tie Downs Compatible Between 2011 Ford F-350 and 2006 F-350?The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2016 and Rear # TLF3006 from a 2011 Ford F-350 with 8 foot bed will not fit a 2006 F-350. The 6-3/4 foot bed # TLF2012 and # TLF3006 will also not fit. Instead you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2007 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3004 for a 6-3/4 foot bed or # TLF2011 and # TLF3004 for an 8 foot bed. These are fits are based on no board or step...
view full answer... - Which Torklift Camper Tie Downs Fit 2005 Ford F-250 Short Bed with Steps and Factory HitchI checked with Torklift and for your 2005 Ford F-250 short bed, with steps, and a factory hitch the correct custom camper tie downs are part number # TLF4007 for the front and # TLF3004 for the rear. If your looking for turnbuckles we have the stainless steel part # TLS9529-2-LK which are going to work great as well! They come with locks too which is nice. I attached a couple install videos for this for you to check out as well.
view full answer... - Recommended Frame-Mount Camper Tie-Downs for a 2006 Ford F-350 Long Bed Dually with Factory HitchIf you do indeed have a factory hitch on your 2006 Ford F-350 Dually long bed, the options available for you for frame-mounted camper tie-downs on your depend on if you have boards or steps installed on your truck. If you do have boards/steps installed on your truck, I recommend the following setup: - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4006 - TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3004 If you do not have boards/steps installed on your truck,...
view full answer... - Camper Tie Down Recommendation For 2009 F-350 Single CabIf you have an 8' truck bed I recommend # TLF2011 and # TLF3004. If you have a 6-3/4' truck bed I recommend # TLF2012A and # TLF3001A. Note: These tie-downs are made for a factory installed hitch.
view full answer... - Recommended TorkLift Camper Tie-Downs for 2007 Ford F-350 with Factory Hitch If your 2007 Ford F-350 Super Duty has an 8 foot bed, does not have any board or step underneath the truck bed, and is equipped with the factory hitch, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2011 (for the front) and # TLF3004 (for the rear). These sturdy tie-downs are custom-fit for this truck and provide a clean, unobtrusive look when installed. They will give you attachment points at the front and rear of your truck for securing a bed-mounted camper. The tie-down...
view full answer... - Frame-Mounted Camper Tie-Downs for 2007 Ford F-250 With Short Bed & Factory HitchWe can get you set up with rear tie-downs for your 2007 Ford F-250 short bed with a factory hitch and no running boards to go with your current front TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2007. However, since you already have TorkLift tie-downs in front, you'll need the frame-mounted tie-downs for the rear as well in order to utilize turnbuckles from the same manufacturer to maintain compatibility. So what you'll need for rear tie-downs are the TorkLift Custom Frame-Mounted...
view full answer... - Recommended Camper Tie Downs and Turnbuckles for 2007 Ford RangerThe Brophy Stake Pocket Mounted Camper Tie Downs # TDSF you asked about can work for your 2007 Ford Ranger but are not a custom fit. These are universal fit options. The Brophy Clamp On Camper Tie-Downs - Bed Mount # HSAB or # HSSF are also universal fit options. The only confirmed fit we have for a custom fit on your truck is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2013 and rear # TLR3500 (or rear # TLF3004 if you have the TorkLift hitch). These are confirmed...
view full answer... - Air Bag Suspension Kit for 2006 Ford F-350 and Torklift Camper Tie DownsThe best air bag kit for your 2006 Ford F-350 that fits your budget is the Firestone Ride Rite kit part # F2400 which I attached an install video on for you to check out as well. The Torklift tie downs part number # TLF2007 and # TLF3004 are both a fit as well. For a hitch extender you'd need something like the part # RP45292 as the # TLE1636 can only fit Torklift hitches.
view full answer... - Correct Front Frame Mounted Camper Tie-Downs for a 2006 Ford F-250 8' BedIt sounds like you might be looking for a set of frame mounted camper tie downs and if that's the case we do have an option for you in the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2011 which are a fit for a 2006 Ford F-250 8' Bed (No Step Under Bed). If you ever need a matching rear set then you'd want the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF3004. Then, for a set of compatible turnbuckles I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted...
view full answer... - Camper Tie-Downs for a 2006 Ford F-350 Super Duty with a 6-3/4 Bed and a Factory Installed HitchIt looks like your 2006 Ford F-350 with the 6-3/4' bed has no rails under the bed and a factory installed hitch. For this configuration, you have two options, depending on the hitch. If your hitch has an open-ended crosstube, then the TorkLift set is your best option, part # TLF2007 for the front and part # TLF3004 for the rear. These tie downs do not require drilling, making them the easier installation. I've linked to video reviews of both. If your hitch does not have an open-ended...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Written by:
Lindsey S
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.