Don't Miss These Holiday Savings!
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1509 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.From technical assistance in choosing the correct product, a great price, super fast shipping, and easy to follow directions: Perfect! I needed a quality set of truck camper tie-downs and the reviews pointed to TorkLift. They arrived in 3 days at 1300 and I had them installed by 1500 on my 2019 Sierra Denali 3500 dually. Super easy and strong as nails! Very pleased...
Love these!! Made it feel like I actually had some control over my truck camper!! Before with the bed rail mounts I always felt like it was hanging on by a thread and it rocked and shifted constantly. Now it’s secure and I’m able to get to the boondocking locations I been wanting to get to for my [online] channel. “Work Less Enjoy Life More” ??
They are easy to install and work great with the torque lift camper tie-downs.
They are so strong that I use them as a step to reach things in the bed of the truck when the camper is not in the truck.
Was delivered in two days as promised. Box was beat up but everything was still in it. Parts are way to tough to hurt
Pretty easy for a 73 year old guy to install.
One tip though, on the driver's side install the 1/2x5 bolt with the bolt head to the inside. Gives a little more clearance with the fuel tank. This is opposite of what the directions say.
Thanks Nick for the great service.
I am satisfied with my purchase of the TLC2219 tie down system for my camper. It was installed on my 2014 Chevy diesel. The front set did require two pairs of hands to get the nuts and bolts in place.
After being told that all 3 items were in stock and that the order would be going out soon. I received a call from etrailer stating that the rear tie downs were not in stock and that they would have them shipped directly from the manufacture. Minor inconvenience but was handled smoothly to correct the problem.
Easy install on my truck. Simple easy to follow instructions. Work great and my camper feels very secure.
Kit was complete and easy to install. The eTrailer install video on product page was very helpful. Took about 3 hours to install front and rear kits, and that included a sandwich and coffee break. ( RV dealer quoted me 4-6 hours @ $165/hour). Kit lined up with frame mounts exactly. I recommend a helper if you’re installing with truck in the driveway.
The tiedowns work great. Even stood up to a rear end collision that busted truck and truck camper. I would recommend this product to anyone.
Very easy to use and look great on the truck with or without the camper on the truck
Installed on 2016 Chevrolet Silverado 2500 HD. Absolute perfect fit on both sides. Thx for all the videos online etc... No joking, I had each on in 15 minutes. One is always apprehensive about fish wires and interior frame bolts. No problem here. I did do one thing different than any thing I read in instructions or saw on the internet. When I removed the top stock box bolt, I hung the unit loosely from the bolt. There was plenty room to move it around and install the frame bolt with the fish wire. Never lifting or holding the unit during this part of the install. Simply inserted the bolt into the frame with wire and hardware then into the the slotted hole of the unit, and added washers and nut. On this unit there's only one interior frame bolt. The other is thru frame. Excellent powder coat. Fantastic packing and boxing. Truly a first class outfitter.
Could not be happier with the quick service I received from etrailer and outstanding product I purchased. The install was a breeze with the easy to follow instructions and I am now able to stay wherever it is I am playing! Thanks for the great prices and good service ??
Parts delivered fast and installed with no trouble fit just like they said
They are pricy but after installing and using them I wouldn’t want to use anything else
Pretty easy install. My third different set. I had just installed Weston Platinum Oval nerf bars, and had to loosen the center cab mounts and drop the rear. Added 15 minutes to a 60 minute job.
The camper tie downs fit my truck perfectly. Their size and weight made the installation intimidating, but your videos helped, and your written instructions are very good. I like how your instructions directed me to install the difficult side first (passenger or driver side). Unfastening the "fish wire" from the bolt is not easy - you could include extra fish wire. I have a GMC 3500 dually, stock, and I installed these tie downs as the truck sat on the ground, about a two hour project, and I'm 69.
Front tie-downs went on good, not too tough on this senior citizen who doesn't spend a lot of time underneath pickups. All hardware fit well. Went on 2019 Chevrolet Silverado 3500.
High quality camper tie downs. I would recommend these to anyone looking for better option than the bed tie downs. Install was very easy with the provided instructions and hardware/tools. I worked alone, on the ground, and had the brackets installed in about 15-20 minutes. Fitment was perfect onto the truck.
Designed for the truck, these Tie-Downs worked perfectly. Easy Install.
Can not say enough about how they fit the frame exactly as described.
Fits perfect, only complaint was the company supplied a fish wire for a 1/2" bolt but the bolts you need to fish into the frame is 7/16" as you can see in the instructions. Lucky I had a 7/16" fish wire in my tool box. Other than that, very well made and heavy duty.
Great quality and fit perfectly!
Great product! We installed this system ourselves and it was not difficult and couldn't be happier with our decision
This is my second order of torque lift tie-downs. These are a great way to secure your truck camper / truck combination. Easy to install and very solid. Looks great when not in use.
The installation was a breeze. Everything fit perfectly the only suggestion would be to include a second fish wire for the rear. It became unusable over the exhaust. Or could let the customer know do that one last. Ended up using the front fish wire for the rest. Otherwise a very excellent product
Do you have a question about this Camper Tie-Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Patrick
5/3/2021
To date, the tie downs have been perfect. Theres no movement of the truck camper, very secure. Happy with entire application.