Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Zinc Plated Steel - Qty 4
(17 reviews)
Price: $228.55
In Stock
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Zinc Plated Steel - Qty 4
Item # HSBP
Our Price: $228.55
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (17)
- Q & A (0)
- Photos
Brophy Camper Tie-Downs - HSBP
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
Rust-resistant, zinc-plated brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and remove.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Turnbuckles (sold separately) required to attach camper to tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Plated with zinc for superior rust and corrosion resistance
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
Superior Rust Resistance
These bed-mounted tie-downs offer a premium option while still keeping you on budget. Thanks to the zinc plating, they are especially resistant to rust and corrosion, so you can get a set of tie-downs that will last you through many more camping trips. This is especially important if you're going to be camping full-time, or if the tie-downs are likely to be exposed to harsh climates or salt. A little investment now can save you time and money in the long run.
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they will make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSBP CR Brophy Truck Camper Tie Downs for Slide In Truck Camper - Camper Hold Down - No Drill Tie Down - Zinc Coated Finish - 4 Pack
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Zinc Plated Steel - Qty 4 - HSBP
Average Customer Rating: 4.6 out of 5 stars (17 Customer Reviews)
Rust-resistant, zinc-plated brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and remove.by: RW09/18/2023
Quick delivery and my box was in good s hape:)
by: Brian D08/19/2013
Although camper hold down HSBP and tie down package TDHP are both of good quality the tie downs were too long to use on my 2012 Ram combined with my 1986 Hornet 11 1/2' camper.The turnbuckles alone were too long to do what was needed.
by: Roger07/27/2014
Tie downs are great. I also ordered turnbuckles recommended on website however based on configuration all would not work. Had to go to hardware store and buy shorter ones. I purchased tied owns for a 99 ford f150. Putting a slide in camper on truck
by: Dwight 05/21/2017
We put on over 9ooo miles on last year's trip not one issue with tie downs worked perfectly
by: Al M05/23/2017
These tie down installed quickly ans easily on our 2013 Dodge Ram. This is a 2500 HD with crew cab and full box. Very well made. Etrailer had prompt shipping, arrived in 2 days, and the service was great!
by: Pilgrim01/21/2017
Installd camper tie downs today and was very happy with quality of product.
by: Lyle12/29/2017
They work perfect, just like the video showed. Couldn't be happier.
by: Michael 03/23/2020
Awesome as always!! Correct items delivered quickly!!
by: Janette04/09/2021
Highly recommend! Everything was as advertised and delivered on time.
by: Wyatt03/29/2019
Good product.
by: Walt04/21/2018
Very nice product; I would recommend to a friend.
by: Gilbert 03/12/2024
by: Carl 11/11/2021
by: Kenneth 05/20/2021
by: Paul02/16/2021
by: Doug 06/01/2021
17
17
See what our Experts say about this Brophy Camper Tie-Downs
- Will the Brophy Clamp On Camper Tie-Downs Part # HSBP fit a 2018 Ford F-350The Brophy Clamp On Camper Tie-Downs part # HSBP will fit your 2018 Ford F-350. The bed rails fall with in the required 5.5" maximum width and has the 2" of space under the bed rail that the tie downs require.
view full answer... - Will The Brophy Clamp On Camper Tie Downs Work On A 2007 Toyota TacomaI reached out to my contact at Brophy and they haven't tested their clamps on any foreign vehicles. They said that their Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel - Qty 4, # HSBP should work as long as you have less than 5 inch wide walls and more than 2 inches of space beneath the lip of bed rail. Obviously it does require your truck bed has the lip. You will also want to note that it will work with most spray-on bed liners, but it would require cutting around...
view full answer... - Do Brophy Camper Tie Downs Have Weight CapacityBrophy camper tie downs like the part # HSBP do not have a weight capacity. As long as the camper is the correct length for the truck bed they will work just fine.
view full answer... - Will the Brophy Camper Tie-Downs Part # HSBP Fit a 2015 Chevrolet Silverado 3500The Brophy Clamp On Camper Tie-Downs part # HSBP will fit your 2015 Chevrolet Silverado 3500. However, we have not yet tested them on this truck while using a Sun Lite Truck Camper so I would not be able to confirm fitment though I do not see any reasons as to why they would not work for you. I have attached a dimensional photo of the tie downs for you as well so you can get a better idea of how they would work for you. I have also attached a list of our frame mounted camper tie downs...
view full answer...
- How to Determine if the Brophy Clamp On Camper Tie-Downs Will Fit a 2022 Ram 2500The Brophy Clamp On Camper Tie-Downs # HSBP are not a fitguided item that list specific vehicles that it fits. It is more of a universal item. That being said, the Brophy Clamp On Camper Tie-Downs # HSBP will fit most full-size, non-dually pickup trucks. It will not fit if your bed rail width is over 5-1/2" and you need at least 2" of space beneath the lip of the bed rail. It also will not work if you have a drop-in bed liner, plastic bed rails, double-walled bed, or side-step bed. As...
view full answer... - Will the Brophy Clamp On Camper Tie Downs Fit on 2013 Ford F-150 Short BedThe Brophy Clamp On Camper Tie Downs # HSBP are designed to be a fairly universal fit on most trucks, but there are some measurements that you'll want to take in order to confirm these will work. First, measure the bed rail itself to make sure it's no wider than 5-1/2 inches; you will also need to have at least 2 inches of space beneath the lip of the rail. As long as you can confirm these two things are true then you can use these on your2013 Ford F-150 short bed. It should also be noted...
view full answer...
- Determining if Brophy Clamp On Camper Tie-Downs Will Work on 2003 Chevy Silverado The Brophy Clamp On Camper Tie-Downs # HSBP is a pretty universal product so it should work on your 2003 Chevy Silverado but you will want to take a few measurements just to be sure. First measure the bed rail itself to make sure it's no wider than 5-1/2 inches. Also verify that you have at least 2 inches of space beneath the lip of the rail. Lastly this particular tie-down isn't compatible with plastic bed rails so if possible you will need to remove the plastic from your truck.
view full answer...
- Will the Brophy Camper Hold Downs # HSBP Fit a 2009 Chevy SilveradoThe Brophy camper tie downs # HSBP are made to fit newer domestic full size trucks like your 2009 Chevy Silverado. It will NOT fit the following: Will not fit step side beds or some double-wall beds Will not fit some Dually beds Will not fit some import trucks Will not fit 2004-2008 Ford F-150 Pickups Even though there is no specific truck fit list, provided that your Silverado is not a step side bed, double wall bed, or a dually it will fit.
view full answer... - Will the Brophy Camper Tie Downs HSBP Fit a 2015 Ford F-150Yes, the Camper Hold Down Zinc Coated Finish # HSBP would work just fine on your 2015 Ford F-150. The only F-150s that Brophy says these won't fit are the 2004-2008 models.
view full answer... - Brody Tie Down # HSBP Recommendation for 2000 Dodge DakotaThe Brophy Clamp On Camper Tie-Downs # HSBP that you referenced will work great 2000 Dodge Dakota but we do not have spring loaded turn buckles that work with this kit. The recommended turnbuckle kit is the part # TDHP which are not spring loaded. I wouldn't say the spring turnbuckles are a terrible idea at all, but we haven't seen them really be a necessity. The # TDHP will work great for you.
view full answer... - Recommended Camper Tie Downs for 2015 Chevrolet Silverado 1500The Brophy Clamp On Camper Tie-Downs - Bed Mount # HSBP referenced in your question are designed as a universal application and will fit most pickup trucks. It sounds like the tie-downs that you are currently using are more of a custom-fit item for your specific model truck. If you would rather use a system like these Brophy Tie-Downs, which clamp onto the truck's bed side rails, you will just want to take note of a couple dimensions on your Silverado. These tie-downs will work great...
view full answer...
- How to Determine Fit of Brophy Clamp On Camper Tie-Downs For 2017 Ford F-250It is very likely, but you'll need to measure the bed rails of your 2017 Ford F-250 in order to ensure the fit of the Brophy Clamp On Camper Tie-Downs # HSBP. The reason for that is, these are a universal-fit application and not vehicle-specific. So in order to determine if these fit your F-250, all you have to do is measure the width of your bed rail (on the top), which just needs to be less than 5-1/2 inches. You will also need to have at least 2 inches of space underneath the lip of...
view full answer... - Brophy Camper Tie-Down Compatibility with 1986 Ford F-250The Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel - Qty 4 # HSBP will work well for your 1986 Ford F-250. You may also want to consider the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to go with them and complete your setup.
view full answer...
- What is Difference Between Brophy Camper Hold-Down Kits # HSBP and # HSSF for 2004 SilveradoThe Brophy Camper Hold-Down Kits # HSSF and # HSBP differ in their finish. The HSBP has a zinc finish while the HSSF has a black powder-coat finish. Both of these products are intended to fit a broad range of trucks with the exceptions of some double-wall beds, step-side beds, and some dually and import trucks. These fit trucks that have a downward lip on the underside of the bed rail. Bed liners may require trimming in some cases. Both kits feature easy no-drill 2-bolt installation...
view full answer... - How to Determine if Brophy Universal Camper Tie-Downs Will Fit TruckI can tell you some quick measurements to take to determine if the Brophy Clamp On Camper Tie-Downs # HSBP will fit your 2006 Dodge Ram, but these are universal tie-downs and there is not an application guide specific to your truck. That said, it is likely they do fit your truck, but to make sure start by measuring your bed rail width, which needs to be 5-1/2 inches or less. You also need at least 2 inches of space underneath your bed rail, and they won't work with drop-in bed liners or...
view full answer...
- Brophy Camper Tie Down Recommendation for a 2014 Ford F-150Yes, the Camper Hold Down Zinc Coated Finish # HSBP would work just fine on your 2014 Ford F-150. The only F-150s that Brophy says these won't fit are the 2004-2008 models. I attached a picture that shows what they will look like installed. For install hardware you would then want the part # TDHP.
view full answer...
- Will The Brophy Clamp On Camper Tie-Downs HSBP Fit My 2016 Ram 3500 Long Bed?Yes, the Brophy Clamp On Camper Tie-Downs # HSBP will be a good fit for your 2016 Ram 3500. These will fit virtually any truck as long as the bed rail is less that 5-1/2" wide, and you have at least 2" of space beneath lip of bed rail. So unless your Ram has the Rambox storage system these will fit nicely. We also have the turnbuckles available if you are in need. Brophy also makes the basic turnbuckles # TDHP, which will work nicely for your Arctic Fox 990.
view full answer... - Which Brophy Tie Downs Will Fit a 2002 Dodge Dakota? When we are unable to measure we recommend going with the larger Brophy Tie Down # HSSF which has a 5-7/16" measurement from the lip to the bend. The Zinc Plated # HSBP one you found has a 5" measurement from the lip to the bend. We have not attempted to fit these on a Dakota in our shop and Brophy builds these as a universal option and only has to do a redesign when the market changes which is why you see wider options since the rails have gotten wider on newer trucks.
view full answer... - Can Zinc Plated Brophy Tie-Downs be Used with Aluminum Bed on Ford PickupYou can use the Brophy Clamp On Camper Tie-Downs # HSBP with the aluminum bed on your Ford pickup but you would want to remove them frequently. If you are planning on keeping them installed for a long period of time then you will want to go with part # HSSF instead which is the exact same tie-down just with a black powder coat finish. The zinc plating on the steel will react with the aluminum a lot quicker than the black powder coat will wear off of the other tie-downs. If you will be...
view full answer...
- Brophy Camper Tie Downs that Fit 2014 Ram 1500Brophy has tie downs that are a fit for your 2014 Ram 1500 with the part # HSAB and # HSBP but the part # TDSF is not a fit for your vehicle.
view full answer... - Does the Brophy Clamp # HSSF Fit A 2018 F150 Crewcab 5.5 BedYes, the Brophy Clamp On Camper Tie-Downs # HSSF will work just fine with your 2018 Ford F-150. The Brophy Tie-Downs are easy to install and remove and require no drilling for installation. The Brophy Tie Down # HSBP will work for you if you have the required 5.5 inches of maximum width and have the 2 inches of space under the bed rail. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles # TDHP. If you have any further questions please...
view full answer... - Which Brophy Camper Tie Downs Fit 2019 Nissan TitanBrophy tie downs, # HSSF, will work well for your 2019 Nissan Titan. The Brophy tie downs don't have a specific vehicle fit list but this is the kit we've found works best on import truck beds. The part # HSBP would not be the kit I would recommend as Brophy has told us it does not fit import trucks well. This setup is rated for use with any camper that fits the bed dimensions of your truck so it would work well with yours. I also recommend hardware package # TDHP to secure the camper...
view full answer... - Truck Bed Camper Hold Down Recommendations for a 2003 Ford RangerFor your 2003 Ford Ranger, you will need frame mounted tie downs. You may be able to use Camper Hold Down, # HSSF or # HSBP that you referenced, the only difference is the finish. The # HSSF is powder coated black and the # HSBP is zinc plated. You will need to compare the dimensions of these hold downs using the pictures I have added to your truck to determine fit. If you determine that they will fit, you will also need Camper Tie Down Hardware Package, # TDHP.
view full answer...
- Camper Tie Down and Air Bag Kit for 2018 Ram 1500For an easy clamp-on camper tie down solution the Brophy kit part # HSBP is a fit and does not require any drilling. You will need the hardware kit part # TDHP as well but then you'd be set. Then for air bags you'd want the Firestone kit part # F4185. This is the highest quality kit we have for your truck.
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Updated by:
Amanda M
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dwight C.
6/16/2018
Great product