1. Camper Jacks
  2. Lippert Components
  3. Leveling Jack
  4. Stabilizer Jack
  5. Scissor Jack
  6. 6000 lbs
Lippert Scissor Stabilizer Jack - 24" Lift - 6,000 lbs - Qty 1

Lippert Scissor Stabilizer Jack - 24" Lift - 6,000 lbs - Qty 1

lowest price pledge
Retail:$86.21
Our Price: $58.42
You Save: 32%
Camper Jacks
Orders above $99 qualify for Free Shipping
Shipping Weight: 15 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

This leveling scissor jack with a 6,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 28-1/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Call 800-298-8924 to order Lippert Components camper jacks part number LC285325 or order online at etrailer.com. Free expert support on all Lippert Components products. Guaranteed Lowest Price and Fastest Shipping for Lippert Scissor Stabilizer Jack - 24" Lift - 6,000 lbs - Qty 1. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (16)
  • Q & A (11)
  • Photos
  • Why etrailer?

Lippert Components Camper Jacks

  • Leveling Jack
  • Stabilizer Jack
  • Scissor Jack
  • 6000 lbs
  • Bolt-On
  • Lippert Components
  • 24 Inch Lift
  • 1 Jack

This leveling scissor jack with a 6,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 28-1/4" as your application requires. The bow-tie base steadies the jack on soft surfaces.


Features:

  • Scissor jack helps to level and stabilize 5th-wheel, travel, horse, and cargo trailers
  • Bow-tie base keeps the jack steady, even on soft surfaces
  • Heavy-gauge steel construction ensures durability and strength
  • Black powder coat finish provides protection from rust and corrosion
  • Easy bolt-on installation with included hardware
  • Crank handle sold separately


Specs:

  • Height:
    • Collapsed: 4-1/4"
    • Extended: 28-1/4"
  • Lift: 24"
  • Collapsed length: 26-3/16"
  • Mounting base dimensions: 10-1/4" long x 3-1/4" wide
    • Large bolt hole dimensions: 11/16" long x 7/16" wide
    • Small bolt hole diameter: 5/16"
  • Load capacity: 6,000 lbs
    • Maximum capacity at 22" extension: 6,500 lbs
  • Quantity: 1 jack
  • 90-Day warranty



Mounting Hole Diagram

Collapsed Jack Diagram

Note: This jack is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use this jack to lift your trailer or RV. Doing so will exceed the capacity of the jack.


If you are looking for a safe, durable, and dependable replacement jack for your trailer, this scissor jack is a safe bet. The mounting pattern and overall dimensions are industry standard, which means that it should easily bolt onto your trailer in place of your original jack and function seamlessly with your existing setup. And it is constructed from powder coated steel to ensure that it will resist rust and corrosion and hold up well to the elements.



285325 Lippert Components (LCI) Scissor Stabilizer Jack - 24" Lift - 6,000 lbs - Qty 1

Item # LC285325






Customer Reviews

Lippert Scissor Stabilizer Jack - 24" Lift - 6,000 lbs - Qty 1 - LC285325

Average Customer Rating:  4.9 out of 5 stars   (16 Customer Reviews)

This leveling scissor jack with a 6,000-lb capacity will help keep your trailer or RV level and stable. It adjusts from 4-1/4" up to 28-1/4" as your application requires. The bow-tie base steadies the jack on soft surfaces.

- LC285325
by:

Works great! No problems. Easy to adjus t. 745926



- LC285325
by:

Easy mounting. 918022



- LC285325
by:

a tree root ripped off my jack and mangled it beyond repair. this one is just like my old one only shiny and new! 880819



- LC285325
by: 08/27/2020

869689



- LC285325
by:

Received and installed this new jacks this weekend. They are way stronger the the original factory jacks. Looking forward to our first trip this summer. Plan to buy 2 more for the front of the travel trailer. 845679



- LC285325
by:

I may have over-bought. The old jack was rusty and damaged, so I measured the length of the screw. The new jack is the same size exactly, but MUCH heavier gauge metal. I had to drill out the existing holes to 5/16" to accommodate the self-tapping screws that came with the new jack. The new screws went in with no trouble. The new jack adds a couple pounds to my dry weight, but it is very sturdy. I don't expect that I will ever have to replace it. The paint/coating is very smooth and thick. 833802



- LC285325
by:

Exact replacement of my old Jack that had a bent rod, but now my other ones don't look as nice as this one! 778482



- LC285325
by:

Quick efficient service! 747533



- LC285325
by:

Bought as extra 5th wheel stabilizers. Order arrived a day early and j ack's work perfectly. 729707



- LC285325
by:

Received exactly what I expected in very timely manner. Will order here in the future. 714298


Comments
Working fine as it should
Darin J - 10/09/2020

102002

- LC285325
by:

Installed today to replace broken jack. Works great. 707195



- LC285325
by:

Replaced lighter ones that were just too weak. They seam to be good. I have only used them once so far. More trips coming 675474


Comments
They are working good. A lot better than factory ones. Glad that I purchased these.
Dave - 07/26/2020

95353

- LC285325
by:

I bought this product to replace the original equipment electric LCI stabilizers that came on my 31ft travel trailer as they performed poorly from day one and eventually stopped working all together. I removed the existing stabilizers and installed all four of these in about an hour. I reused the existing holes and hardware. My camper has never been this solid. Couldn't be happier. This is not my first experience with etrailer. I have been buying from them for years. They are up front with availability, have great product knowledge and are very accommodating when I am not so thrilled with a product..........which is not the case with this one, I wish my camper came with these to begin with. 651644



- LC285325
by:

Nice piece, exactly what was on trailer. Fast excellent service 522709



- LC285325
by:

The stabilizer jack that I purchased was an Oem replacement for the original which was bent in an accident. Install was simple and works great. Replacement tire cover looks great. Ordering was easy and delivery was fast. 399995



- LC285325
by:

Quality seems good. Threads must be finer than original, takes more cranks to move this replacement up or down. 258770


16
16

Ask the Experts about this Lippert Components Camper Jacks

  • Stabilizer Scissor Jack with 5000lb Capacity and 24” Lift For Use With Power Drill
    I have a solution for you, but when I called Lippert to confirm the size of the bolt on the Lippert Components Scissor Jack # LC285325 they informed me that this particular jack should not be raised or lowered using a power tool, but it does have a 3/4" nut. For that reason, I recommend instead going with the Stromberg Carlson # JSC-24-IND which works with a standard 3/4" socket. If you needed a matching socket for this jack, you can use the Ultra-Fab Speed Socket which is an adapter for...
    view full answer...
  • What Is The Width Of Base On The Lippert Scissor Stabilizer Jack
    Thank you for including your photo. I pulled the Lippert Scissor Stabilizer Jack - 24" Lift - 6,000 lbs # LC285325 from our warehouse and measured across (right over the Stabilizer Jack sticker pictured) and this jack provides the 2-1/4" of width you're looking for. The side surface is definitely flat however you can see from the image that the corners are rounded. Included is a helpful review video for additional information as well.
    view full answer...
  • Replacement Stabilizer Jack for 2013 Starcraft AR-ONE
    A 2013 StarCraft AR-ONE will use a Lippert Scissor Stabilizer Jack - 24" Lift - 6,000 lbs - Qty 1 # LC285325. I've attached some measurement in an attached photo to assist. There isn't a direct replacement part number I can look up but this jack is a standard from manufacturers and will work well for your replacement.
    view full answer...
  • Can Electric Motor be Installed on Lippert Scissor Stabilizer Jack
    As long as you are able to get the motor to fit the Lippert Scissor Stabilizer Jack # LC285325 I see no problems with doing that. Typically you'd use the Manual Hand Crank # LC285324 to operate the jack which has a 3/4" socket. It would also be worth noting the various dimensions of this stabilizer jack. I have attached some photos to this answer page for you to reference and compare with what you currently have. Please note that this jack is only meant to help stabilize your trailer...
    view full answer...
  • Mounting Bracket Dimensions For Lippert 24 Inch Stabilizer Scissor Jack
    The mounting brackets for the scissor jacks we offer do vary. I went to the warehouse and took some measurements of the Lippert Components 24 inch Scissor Jack, part # LC285325. I have attached a photo of the mounting brackets with the dimensions shown. This scissor jack measures 4-5/16 inches tall when fully retracted and 28-5/16 inches when extended. The jack measures 26-13/16 inches long when retracted. I have attached a link to our product page for the scissor jacks we offer.
    view full answer...
  • Can the Lippert Components 24 Install on Both Sides of Trailer
    The scissor jack part # LC285325 that you referenced can be installed on the right or left hand side of a trailer. In other words they are ambidextrous. To raise the jack you would turn the handle clockwise, and to lower it counter-clockwise.
    view full answer...
  • Does Lippert Scissor Stabilizer Jack Have a Capacity at Different Heights
    There is not a specific capacity for the Lippert Scissor Stabilizer Jack # LC285325 at 6 inches to 8 inches high; they simply have a 6,000 lb capacity per the manufacturer. I have added a link to a video review as well of the Lippert Scissor Stabilizer Jack # LC285325.
    view full answer...
  • Will Lippert Stabilizer Jacks Fit 2015 Passport Ultralight
    Yes, the Lippert Scissor Stabilizer Jack # LC285325 that you referenced will work great on your 2015 Passport UltraLight bunk house. These have 24 inches of height and have a capacity of 6,000 lbs per jack so with four of these your RV would be very stable!
    view full answer...
  • Single Replacement Stabilizer Scissor Jack for 2020 Imagine 2670MK Trailer
    I can help you determine which single stabilizer jack is the best option for your 2020 Imagine 2670MK, though there isn't a list or any type of database, for example, that has specific replacement parts for trailers. That said, all you really need to know is the amount of travel you need as scissor jacks are universal fits. The best option is likely the 24 inches of lift of the Lippert Scissor Stabilizer Jack # LC285325, which has a 6,000 lb capacity. It also uses a handle (part # LC285324)...
    view full answer...
  • Recommended Replacement Upgrade Stabilizer Jacks for a Winnebago Winnie Drop 170S
    I have some great stabilizing jack options for a Winnebago Winnie Drop 170S. The factory jacks would have likely been Lippert so in which case we offer the Lippert Scissor Stabilizer Jack part # LC285332 or part # LC285325 for manual or the Lippert Components High-Speed Power Stabilizer Jack part # LC298707 for an upgraded electric option. Winnebago does not actually make the stabilizer jacks, they are outsourced to another company, Lippert Components I believe is the OEM.
    view full answer...
  • Where Are the etrailer Scissor Stabilizer Jacks Made
    The majority if not all of the Scissor Stabilizer Jacks like part # TJSC-24 are going to be made overseas. That said, this is not a sign of poor quality because if you look at the reviews you will see a reflection of a quality well made product. If interested, we also have other options with more lift such as ones from Ultra-Fab part # UF48-979006, Lippert part # LC285325, and Stromberg Carlson part # JSC-24-IND.
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Installed by:
Cole B
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Chelsea B
Updated by:
Brian T
Updated by:
Kristina F
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.