1. Camper Jacks
  2. Husky
  3. A-Frame Jack
  4. 4500 lbs
  5. Bolt-On
  6. Electric Jack
Husky Brute Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 4,500 lbs

Husky Brute Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 4,500 lbs

Item # HT87247
lowest price pledge
Retail:$302.89
Our Price: $289.09
You Save: $13.80
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 30 lbs
Quantity: 
In Stock
HT87247 - 24 Inch Lift Husky A-Frame Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Powered jack features a ball-bearing screw system that reduces noise and wear and operates more efficiently than standard screw systems. Automatic stop prevents damage to gears. Front and side LEDs offer nighttime visibility. Call 800-298-8924 to order Husky camper jacks part number HT87247 or order online at etrailer.com. Free expert support on all Husky products. Guaranteed Lowest Price and Fastest Shipping for Husky Brute Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 4,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (515)
  • Q & A (419)
  • Photos
  • Used (1)
  • Why etrailer?

Husky Camper Jacks - HT87247

  • A-Frame Jack
  • 4500 lbs
  • Bolt-On
  • Electric Jack
  • Husky
  • 24 Inch Lift
  • 2-1/4 Inch

Powered jack features a ball-bearing screw system that reduces noise and wear and operates more efficiently than standard screw systems. Automatic stop prevents damage to gears. Front and side LEDs offer nighttime visibility.


Features:

  • Electric jack with powered drive lets you lift and lower your trailer quickly and easily
  • Low-friction ball screw minimizes resistance to reduce wear, noise and heat
    • Ball bearings roll smoothly through threads - no direct, friction-inducing contact
    • 30 Percent less power draw than typical screw systems
  • Automatic stop prevents damage caused by hard stops and excessive pressure
    • Motor is shut down before nut reaches end of shaft
  • 3 Built-in LEDs illuminate area to front and sides of jack for superior nighttime visibility
    • Side lights ease weight-distribution hookup and disconnect
  • Trailer connector storage bracket guards trailer wiring from the elements
  • Drop leg allows for greater adjustability
  • Large footplate provides excellent stability
  • Hardened steel gears and stainless steel fasteners offer maximum durability
  • Sturdy cover and weather-guarded switches prevent water-related damage to motor
  • Silver powder coat finish resists corrosion
  • Bolt-on installation for A-frame trailers
  • Manual override crank, 6' of 10-gauge power supply wire, and 30-amp fuse included


Specs:

  • Bracket height:
    • 8-1/2" Retracted
    • 26-1/2" Extended
  • Total lift: 24"
    • Screw travel: 18"
    • Drop leg travel: 6"
  • Lift capacity: 4,500 lbs
  • Tubing diameter: 2-1/4"
  • Footplate diameter: 5-1/2"
  • Motor attributes:
    • 12 Volts
    • 10" Travel in 38 seconds
    • 25-Amp draw at rated load
  • 1-Year warranty


Smooth, Low-Friction Operation

Typical jack screw systems feature direct contact between the surfaces of the screw and the threaded nut. This constant contact produces a good deal of friction, which not only increases the amount of power necessary to operate the jack but also creates heat within the system. Heat leads to increased wear on the threads, and this wear can ultimately lead to failure.


Husky Brute Ball Bearing Jack Screw System

The Brute is built with ball bearings that roll smoothly along the threads of the screw shaft and the nut, thereby eliminating direct surface-to-surface contact. This produces far less friction along the threads, leading to a reduction in heat and wear, as well as noise. In addition, because much of the friction is eliminated, less power is needed to operate the Brute. This electric jack pulls 30 percent less amperage than jacks with traditional screw systems. The overall result is a jack that can be raised and lowered faster, smoother and more efficiently.


SmartStop Automatic Stop

When a typical trailer jack is extended beyond the recommended height, the threaded nut that creates the up-and-down movement will hit a built-in stop at the top of the shaft - and hit it hard. If you leave the motor running, the nut will continue to apply pressure to this stop as it attempts to rise higher. The result is extreme stress on the gears and on the jack as a whole.


The Husky Brute has an integrated safety feature to combat this problem. The SmartStop timing system ensures that the jack motor shuts off before the nut can hit the built-in stop. No hard mechanical stops. No undue stress on the screw system. And most importantly, no damage to your powered jack.



87247 Husky Towing Products - The Brute - Electric Trailer Jack - 18" Screw Travel - 4,500 lbs

Installation Details HT87247 Installation instructions




Customer Reviews

Husky Brute Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 4,500 lbs - HT87247

Average Customer Rating:  4.8 out of 5 stars   (515 Customer Reviews)

Powered jack features a ball-bearing screw system that reduces noise and wear and operates more efficiently than standard screw systems. Automatic stop prevents damage to gears. Front and side LEDs offer nighttime visibility.

- HT87247
by:

15 minute install tops. Comes with round bubble level. Performs well so far. 424698


Comments
Still works like a champ.
Dan m - 08/24/2018

42741

- HT87247
by:

Love this new Lift! etrailer is the best. Easy order, fast delivery, great installation videos. It was easy to install. I wired it inside the electric brake box and mounted the circuit breaker to the side of the battery box. No splicing of wires. Well made piece of equipment. Love the lights, weather sealed switches AND the trailer connection Hanger w/cover......nice! Worth the money, superior to other types I researched. I'm 63 and tired of hand cranking. My trailer is 19' long and very tall and heavy and this lifts it with ease. This is very quiet also. 433280


Comments
Its been a year, and that lift is so dependable, I use it 7 days a week to hook up and unhook my 19 dual axle 10,000 lb. enclosed work trailer. Never fails! So much easier than hand cranking the jack. Its more then worth the money.
Leo F - 09/17/2018

43692

- HT87247
by:

I never write reviews but this electric jack is outstanding! I recently tore some ligaments and dislocated my shoulder which made cranking up my travel trailer painful especially getting it just right to hook up the load leveling hitch. My 4 wheel drive truck is fairly tall so I had to crank it up to get over the hitch then down to lock the hitch then jack it back up to get the leveling bars on. By the time I was done I was sweaty and in pain. After a lot of research I found etrailer, more research and I think I found the perfect electric tongue jack. It was simple to install, it lifts my trailer and truck with ease, it runs smoothly and it is quiet. I could not be happier with the Husky Brute 4500# jack or etrailer service 571310



- HT87247
by:

I have owned two 20' enclosed trailers that are full of either lawn equipment or construction tools. I have had electric jacks on each of them for several years now that I purchased at a local trailer dealer. One of them recently went out so I purchased an electric jack from etrailer. I never knew that my old jacks was so weak. The new jack installed in minutes and looks a lot better than any of my old ones. I cant wait until my other jack tears up so I can order me another one to replace it. I ordered it on Monday and had it on my trailer on Wednesday. If you are thinking about getting one, don't wait.....you won't be sorry. 161722



- HT87247
by:

Great product. Easy to install. Even when my battery drained off, the manual option is simple and easy. 561377


Comments
Perfect!!!!....quick install and will save you from back pain :-
Walter - 09/04/2019

60773

- HT87247
by:

After installing and wiring up this lift I realized I could not close the rear hatch on my tow vehicle. On top of that the base collar does not allow me to rotate the head of the lift away from the travel of the door to get the hatch closed or open. I tried rotating the jack around but could only find bolt hole openings for 2 bolts instead of the 3 I needed for strength. They should have machined out wider slots to allow more rotation of the base collar over the nut plates to find the bolt holes. I believe they forgot about this problem when they engineered the jack which, by the way, is very impressive and well made. After I figure a way around my problem I am certain I will enjoy this jack as I reviewed many and made it my first choice 433447


Comments
Wow what a product!! It is everything that the company has stated. It is a brute of a jack. Very reliable and makes me so glad I purchased it. I became very interested in it when I read about how differently the internal parts were engineered. This one is built to last a long time. Look no further than this one for satisfaction...
Rich P - 09/17/2018

43671

- HT87247
by:

This jack was super easy to install. Seems to have great power. Only complaint is the up and down switch is backwards. We had a lippert jack before and I'm not impressed. Kept blowing the fuse and seemed to struggle. 565409



- HT87247
by:

item arrive on date as stated, this is not the norm!!!! all parts and instruction were included, nothing missing. The operation of jack if flawless!!! I save $100 over other jacks at other web sites that do not have the lift capacity of this one. I just bought a new toyhauler and etrailer will be my place to shop for accessories. I will definitely recommend etrailer to all my friends. Thank you. 109459


Comments
just as happy as a year ago!the jack still operates like new.This is a testament to the quality that Etrailer represents!!
Tim L - 12/08/2014

7963
Comments
I have spent thousands on items and have NEVER had a follow up on an item I purchased let alone a year later to check and see if I was still satisfied with my purchase.Etrailer is the LEADER in the business world in executing customer service !!!!!!
Tim L - 12/08/2014

7964

- HT87247
by:

Purchased the 4500 unit. Installed in about 1 hour. Fast shipping and unit works great. We have the load leveling system and this should make setup fast and smooth! Note: My LP tanks sit very close to the back of unit. I called the factory and they said just take the five screw out of the back where the electric out can be placed and it comes right off and still water tight. Remounted the electric holder on the side of shaft with zip ties. Awesome! 139265


Comments
Nice unit. You defiantly want to disconnect when not in use, because to will drain the battery
Pat R - 07/05/2015

13064

- HT87247
by:

Installation was quite easy. The circuit breaker seemed too easy to reset as there was no resistance. Several attempts to activate the lift failed. Checked power and 12.5 volts to the motor from a new 12 volt battery. Still will not operate. Will call the manufacturer to determine discuss the issue. 570699


Comments
There are a few things that could be causing the problem youre experiencing. Overloading the jack is the most common culprit, but since the jack you purchased has a whopping 4500 lb lift capacity, so I doubt thats the issue. The next likely candidate is a short in the power feed circuit. Make sure the connection at the battery is secure, and that the power feed wire doesnt have any nicks or cuts in it.
-- Mike L - 10/02/2018

44246

- HT87247
by:

Works great 883799



- HT87247
by:

Product expert helped me find the right one to replace my manual jack. It fit right up and was easy to install. 820030



- HT87247
by:

The jack itself seems to work quietly and well. A few points on installation: The manual crank was not included in the packaging. etrailer is sending one. Installation of the included 7 wire female plug storage bracket was without instructions and quite ackward. Full electrical hookup of power and circuit breaker requires 4ea. 12-10 butt connectors which would have been nice to know about in advance. 805712



- HT87247
by:

The Husky Brute trailer jack was perfect. It met all expectations and provided great service for our travel trailer Total satisfaction Outstanding product. 792622



- HT87247
by:

Has not worked correctly since day 1. Don't know if it is a wiring issue but It seems to work fine one day and then slow or not at all the next. 783160


Comments
This electric jack is grounded through the mounting hardware. The star washers included with the jack have to penetrate the jacks paint in order for the jack to ground. Even if they have, sometimes the jack needs a stronger connection for a consistent ground. If the star washers have dug into the jacks mounting plate through the paint, you can add a dedicated ground wire with a ring terminal between the star washer and the mounting bolt, then secure the other end of the wire with a ring terminal to a bare metal spot on the trailer frame. Another tip for more consistent performance is to power the jack with a battery on the trailer. If you are powering the jack with the vehicles battery through the trailer connector, this could be causing inconsistent power supply to the jack.
-- Victoria B - 04/22/2020

73892

- HT87247
by:

Product install was very easy and straight forward. I tested it out in my driveway and it lifts and lowers smoothly. It is a little slower than I hoped but I do not know how that compares to other electric jacks. Another think to keep in mind when deciding is clearance to your tailgate. In my case I can no longer open the tailgate when hooked to the trailer. 776358



- HT87247
by:

I didn't get to use this enough last year. When I did use it this jack worked like a champ. Our setup uses an Equalizer hitch so some of the hookup/unhook procedure is to lift the back of the truck with the trailer in order to get the weight distribution bars up on their brackets. The old manual jack was a task to do that. The only problem I might have now is a blister on my finger from operating the switch on the jack. :-) 772706



- HT87247
by:

Easy install, works well, will be ordering again to install on new trailer. 772534



- HT87247
by:

It's been a year and still working grea t!! 767181



- HT87247
by:

Easy to install, just remove my old one and the new one fit right in much stronger motor and much quieter. And good lighting. Definitely reccomend. 766662



- HT87247
by:

Probably overkill for my small trailer but stops automatically without jamming. Very pleased with the unit. 762360



- HT87247
by:

The Husky electric trailer jack was easy to install & works great although it's brand new & I've only used it once. Ordering was easy & it was delivered on time without damage. 756319



- HT87247
by:

Great product and fast shipping!! Great transaction!! Thank yiu 749861



- HT87247
by:

Replaced under warranty - loud gear grinding noise - great service by etrailer - product works great for 24' enclosed car hauler - would give it 5 Stars except having to replace - product on previous trailer worked fine for 4 years . . . (?) 729271



- HT87247
by:

Product was as advertised. Installed easy, works great and seems stronger than the stock jack that came with our trailer. 713839


28
562
Show More Reviews

Ask the Experts about this Husky Camper Jacks

  • Electric Tongue Jack for Straight Pole Tongue Recommendation
    The only electric power jack we have for the pole tongue is the Fulton XLT Powered Drive Trailer Jack - Drop Leg - Side Mount - 22" Lift - 2,500 lbs # F141401. This jack will allow up to 22 inches of lift using the 8 inch drop leg and 14 inches of screw travel and will fit 3 to 5 inch tall frames. The only way to use a caster wheel on this jack is to remove the drop leg and use a caster wheel like the Pro Series 6", Detachable Caster w/ Pin for 2" Diameter Jacks # PS1400750340. The...
    view full answer...
  • Replacement Manual Override Crank and Brake Release for Husky Brute Electric Jack
    He/She will want the Replacement Manual Override Crank w/Brake Release Handle for Husky Brute Jacks - 7/16" Hex Head # 87639. I've attached a photo to assist as well as a video.
    view full answer...
  • Comparing the Husky Brute and Bulldog Powered-Drive Trailer Jacks
    There are pros and cons to both Husky and Bulldog electric trailer jacks. My favorite Husky jack is the Husky Brute Electric Trailer Jack part # HT87247 and my favorite Bulldog jack is the Bulldog Powered-Drive Trailer Jack part # BD500187. The reason I like the Husky is because it has a built-in automatic stop that will prevent you from overextending the jack and damaging the internal components. The reason I like the Bulldog jack is because it has a five year warranty so if anything were...
    view full answer...
  • Troubleshooting Husky Powered A-Frame Jack that Only Lights Work On
    Sounds like a switch is bad on the Husky jack. For a replacement for that we have the part # HT87452. Also, the power supply feeding the jack may not be sufficient for the load to raise and lower the jack; the 12v feed on a vehicle 7-way may not be delivering amount of current the jack needs. A power jack often needs a dedicated trailer-mounted battery to get the required lifting power. If you do have a dedicated battery, check and make sure you have a good ground at the jack mount...
    view full answer...
  • Best Value Powered A-Frame Trailer Jack
    I am not totally sure which powered a-frame jacks you are referencing but the best value and overall performing solution is the Husky Brute part # HT87247 as it has a bearing setup in the internal screw which allows it to raise and lower quicker and smoother and also has stops built into the top and bottom which prevents it from over extending and damaging.
    view full answer...
  • Recommended Cover for the Husky Brute Electric Trailer Jack
    The Husky Brute Electric Trailer Jack part # HT87247 does not come with a cover to protect the head from elements such as snow, ice, and salt. However, you can obtain one using the Ultra-Fab Protective Cover for Electric A-Frame Jacks part # UF38-944026. In terms of durability, I rank the Husky Brute the highest. The jack has a waterproof housing that will protect the motor and circuit board from any water getting in. Out of the almost 500 reviews we have on this product, none of them mention...
    view full answer...
  • How to Operate Brake Release Handle for Husky Brute Electric Trailer Jack
    You release the brake on the Husky Brute Electric Trailer Jack # HT87247 by removing the plug at the bottom of the motor, inserting the included brake handle, and then pushing it forwards or pulling it back. I have attached a picture of this which is also highlighted in the attached review video. If you don't have the brake release handle then this can be purchased with part # 87639 which also comes with the manual override crank.
    view full answer...
  • Troubleshooting Husky Brute Electric Trailer Jack That is Clicking
    If your Husky Brute Electric Trailer Jack # HT87247 is only making a clicking noise and you have checked the power source there are a couple of other issues that may be occurring. Start by checking your ground connection to ensure it is secured to a clean, bare metal surface free of any type of paint or corrosion. The other issue may be that you have a bad switch that needs replacing and the correct replacement for the Husky # HT87247 is the Replacement Operating Switch for Husky Brute...
    view full answer...
  • Replacement Brake Release Handle Needed for the Husky Brute Electric Trailer Jack # HT87247
    Yes, the tool for the brake release is included with the part # 87639 that has the replacement crank handle as well. Both of these are for the Husky Brute Electric Trailer Jack # HT87247. The only thing special about the included circuit breaker is that it has some wiring included with it for easy splicing. Any 30 amp circuit breaker that you would find at a local electrical/home improvement store, like part # PK54530, is perfectly acceptable. If the jack hasn't been used very much...
    view full answer...
  • Can Forest River R-Pod 180 Travel Trailer Use Electric Stabilizer Jacks
    Smaller and lighter camper trailers like your R-Pod 180 typically do not have electric stabilizer jacks but instead use manual scissor type jacks. The main reasons are ground clearance, weight and power consumption. The manual scissor jacks typically need less ground clearance than electric ones and they add much less weight to your towing system. They also do not deplete precious battery power. Ram 2500-lb manual jack # TJSC-24, for example, has a retracted height of only 5-inches and...
    view full answer...
  • Recommended Jack for 7,000 Pound Car Hauler
    For your car hauler I highly recommend the Husky Brute Electric Trailer Jack # HT87247. This is an extremely high-quality jack that features an automatic stop to keep it from overextending, which is one of the more common causes of trailer jack failure/damage, and a robust 4,500 pound weight capacity. This capacity is much more than what's actually needed for the tongue weight of your 7,000 pound trailer but the healthy safety margin is going to allow the jack to work well under its limit....
    view full answer...
  • How To Bypass the Switch To Test the Motor On a Husky Brute Electric Trailer Jack
    The process that you are referring to for the Husky Brute Electric Trailer Jack like part # HT87247 means that you will need to take the power wire that goes from the back of the switch to the motor (trace to confirm) and then attach that directly to a 12 volt power supply. If the jack works once this is done then you know the switch is bad and it can be replaced with part # HT87452. However, if the jack still does not work even when direct power is applied to the motor and you have checked...
    view full answer...
  • Recommended Plates for Installing Electric Jack Mount on A-Frame Trailer
    Thanks for the photos. You will need to weld on a plate like the Bottom Support Plate for 2-1/4" OD A-Frame Jacks - 5,000 lbs # JSP-100. It sounds like you will need a couple of these plates to create a bracket instead of a reinforcement because it will need to be strong enough to support the tongue weight of the trailer. Then the Husky Brute Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 4,500 lbs # HT87247 is a great option for your trailer.
    view full answer...
  • Troubleshooting Husky Brute Electric Jack That Only Works for 10 Seconds
    If you are sure that the battery is completely charged and you aren't overloading the 4,500 pound lift capacity on the Husky Brute Electric Trailer Jack # HT87247, the issue you're experiencing is likely being caused by a short on the wiring leading the breaker to trip or the circuit breaker itself. First just inspect all the jack's wiring and look for any pinched, exposed, or otherwise damaged portions that need to be repaired/replaced. If all the wiring is good then I think the culprit...
    view full answer...
  • Recommendation for Electric A-Frame Trailer Jack
    For a great electric A-frame trailer jack, I highly recommend looking at the Husky Brute Electric Trailer Jack # HT87247. This powered jack features a low-friction, ball screw system that greatly reduces wear, noise and heat, leading to a much longer lasting product than a lot of the alternative models. It also has an automatic stop that will prevent any damage caused by hard stops or excessive pressure. The motor will actually shut down before the nut reaches the end of the shaft. 3 built-in...
    view full answer...
  • Would a 3,500 lb Powered Trailer Jack be Adequate for 2007 Forest River Travel Trailer
    A 3,500 lb A-frame powered jack is going to be more than plenty for your Forest River travel trailer. The rating for the jack is based on it's lifting strength and your trailer would not have more than 3,500 lbs of tongue weight. That being said, a higher rated 4,500 lb jack like part # HT87247 is going to allow the trailer to raise and lower quicker as the increased capacity gives it more strength and speed.
    view full answer...
  • Powered A-Frame Trailer Jack Replacement Recommendation for 2014 Airstream Flying Cloud 25FB
    I have a better powered A-frame jack that I can recommend for you than the Atwood that we stopped carrying. My favorite powered jack to recommend is the Husky Jack part # HT87247 as it has bearings in the screw which allow it to operate quicker and smoother. It also shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw. It has a lifting capacity of 4,500 lbs which would be...
    view full answer...
  • Husky Brute Electric Trailer Jack Will Not Extend/Retract But Light Works
    If you have power entering the extend/retract switch on the Husky Brute Electric Trailer Jack part # HT87247 but not leaving then the switch is bad and will need to be replaced for which we have the Replacement Operating Switch for Husky Brute Electric Trailer Jacks part # HT87452. It would also be worthwhile to re-ground the jack on the frame but again I believe the switch is your issue.
    view full answer...
  • Trailer Jack Replacement for Barker VIP 3500 on Travel Trailer
    Sounds like it's time for a new jack! My favorite powered jack to recommend is the Husky Jack part # HT87247 as it has bearings in the screw which allow it to operate quicker and smoother. It also shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw. It has a lifting capacity of 4,500 lbs which would be more than you'd need but will ensure that the jack will operate quickly...
    view full answer...
  • Replacement Upper Housing, Crank Cover, and LEDs for Husky HB4500 Brute Power Jack
    I can certainly help you find the correct replacement parts for your Husky Brute HB4500 Jack # HT87247! We do not, however, carry the plastic cover over the motor. For the gasket and plug for the crank cover, you will want to use the Replacement Brake and Crank Cover for Husky Brute Electric Trailer Jack # HT87456. This will provide you with gaskets and plugs for both the crank and brake cut-outs in the jack. To replace the 3 LED lights on the jack, you will want to use the Replacement...
    view full answer...
  • Recommended Electric Jack For 2012 Keystone Outback 301BQ
    For your 2012 Keystone Outback 301BQ, I recommend the Husky Brute Electric Trailer Jack - Drop Leg - A-Frame - 18" Lift - 4,500 lbs # HT87247. This jack uses a low-friction ball screw to minimize resistance to reduce wear, noise and heat. Ball bearings roll smoothly through threads so there is no direct friction contact like a typical threaded screw design. This allows the system to draw 30 percent less power than screw systems.
    view full answer...
  • Powered A-Frame Jack Recommendation for Heartland Mallard 312
    My favorite powered jack to recommend is the Husky Jack part # HT87247 as it has bearings in the screw which allow it to operate quicker and smoother. It also shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw. It has a lifting capacity of 4,500 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long time.
    view full answer...
  • Recommended Weatherproof Cover For Husky Brute 4500 Electric Trailer Jack
    I recommend the Ultra-Fab Protective Cover for Electric A-Frame Jacks - Vinyl - 14-1/2" x 15-1/2" # UF38-944026. This vinyl cover will protect your Husky Brute Jack # HT87247 from UV rays, dirt, grime, and inclement weather.
    view full answer...
  • Troubleshooting Barker VIP 3500 Electric A-Frame Trailer Tongue Jack
    When an electric trailer tongue jack like the Barker VIP 3500 will not operate with electric power the two most common causes are a weak ground connection or a battery with an insufficient charge. I checked the online installation/operation instructions for this item. These note that since the jack grounds through its round mounting plate a toothed washer should be used on the mounting bolts to bite into the metal at the trailer mount to make a good ground. It is usually best to first...
    view full answer...
  • Best Electric Trailer Jack for Use with a 2017 Keystone Bullet 243BHS
    You will want to find a jack that can at least lift the weight of your fully loaded trailer. Since the Tongue Weight (TW) of a trailer should be between 10-15% of the weight of your trailer, we can do a little math to figure out what would be best. I found that your 2017 Keystone Bullet 243BHS has a dry weight of 4,685 lbs and can carry up to 1,815 lbs meaning that the most your trailer will weigh is 6,500 lbs. This will put your TW at 650 lbs - 975 lbs. I recommend going with a jack...
    view full answer...
  • Replacement Powered Jack Recommendation for 2015 Keystone Hideout 27rbwe
    My favorite powered jack to recommend is the Husky Jack part # HT87247 as it has bearings in the screw which allow it to operate quicker and smoother. It also shuts off automatically before topping or bottoming out. Other jacks will allow you to go too far with the jack but in doing so you damage the threads of the screw. It has a lifting capacity of 4,500 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long time. The capacity for...
    view full answer...
  • Powered A-Frame Jack Recommendation for Homesteader Dump Trailer
    Are you looking for a jack to lift the dump bed or for the tongue of the trailer frame?
    view full answer...
  • Best Powered A-Frame Jack Recommendation for Trailers
    I really like the Husky Brute Jacks like the part # HT87247 as they use ball bearings in the main screw of the jack for a smoother (quicker) operation and because they automatically stop when they reach the bottom or the top of the jack's range. Similar jacks will allow you to over-extend them and damage the threads, but not this one. This jack also has a 4,500 lb lifting capacity so it is more than strong enough for nearly every application. You should note that this figure does not...
    view full answer...

Do you have a question about this Camper Jack?


Used Items Available

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

Our Price: $281.95
Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video by:
Andrew K
Edited by:
Tyler C
Written by:
Lindsey S
Updated by:
Shelly K
Updated by:
Sarah W
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.